- Dev - Roundcube mailing lists

SourceForge.net: CVS service offering changes
by Thomas Bruederli 13 May '06

13 May '06

---------- Forwarded message ---------- From: SourceForge.net Team <noreply(a)sourceforge.net> Date: May 12, 2006 3:41 AM Subject: SUBJECT: SourceForge.net: CVS service offering changes To: roundcube(a)gmail.com Greetings, You are receiving this mail because you are a project admin for a SourceForge.net-hosted project. One of our primary services, CVS, suffered a series of interrelated, critical hardware failures in recent weeks. We understand how frustrating this CVS outage must be to you and your users; however, our top priority remains preservation of the integrity of your data. The series of CVS hardware failures prompted us to expedite the deployment of planed improvements to our CVS infrastructure, drawing upon much of the knowledge that we gained from our Subversion deployment. Our improved CVS service architecture, which we plan to deploy tomorrow afternoon (2006-05-12), will offer greater performance and stability and will eliminate several single points of failure. The Site Status page (https://www.sf.net/docs/A04) will be updated as soon as the new infrastructure is rolled out. In the interim, please read the important information provided below to learn about how these changes will affect your project. Summary of changes, effective 2006-05-12: 1. Hostname for CVS service Old: cvs.sourceforge.net New: PROJECT_UNIX_NAME.cvs.sourceforge.net This change will require new working copies to be checked out of all repositories (so control files in the working copy will point to the right place). We will be updating the instructions we supply, but instructions that your team has written within documentation, etc. will need to be updated. cvs -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/gaim co gaim would be changed to cvs -d:pserver:anonymous@gaim.cvs.sourceforge.net:/cvsroot/gaim co gaim 2. ViewCVS We are moving from ViewCVS to its successor, ViewVC. ViewVC is currently in use for our Subversion service. 3. Sync delay Old: CVS pserver, tarballs and ViewCVS provided against a separate server which is a minimum of three hours behind developer CVS. New: ViewVC will be provided against developer CVS (it will be current). CVS pserver will be provided against a secondary server (not developer server) with a maximum expected delay of two hours. Follow-up work is planned (this infrastructure takes us 80% of the way) to essentially eliminate the sync delay. 4. Read-only rsync service As a new service offering, we are now providing read-only rsync access against developer CVS. This allows projects to efficiently make on-demand backups of their entire CVS repository. All projects should be making regular backups of their CVS repository contents using this service. 5. Nightly tarball service Nightly tarball service is being dropped in lieu of read-only rsync service. Projects which currently depend on nightly tarballs for repository backups will need to begin using rsync to make a backup copy of their repository contents. We see this as a major functional improvement. For a number of reasons, tarballs have fallen out of sync with the data in the repository at times in the past few years. Tarballs required a substantial amount of additional disk, and I/O to generate. The move to read-only rsync allows backups to be produced on-demand, with an update frequency chosen by the project. 6. Points of failure In the past, developer CVS service for all projects was provided from a single host. CVS pserver service was provided from individual backend heads based on a split of the data. Under our new design, developer CVS and most of our CVS-related services are provided from one of ten CVS hosts (count subject to increase with growth). Each host is independent, and makes a backup copy of the repository data of another host (which is used to provide the pserver CVS service). Failure of a single host will impact only the availability of data on that host. Since the data is split among a larger number of hosts, the size of data impacted by an individual host outage is substantially smaller, and the time required for us to restore service will be substantially shorter. This rapid architecture change has been made possible specifically using the research we performed for our recent launch of Subversion service. We've applied our best practices, produced a substantial amount of internal documentation, and kept an eye toward maintainability. This effort has allowed us to deploy this new architecture quickly once hardware was received, and will permit us to quickly scale this service horizontally as growth and demand requires. Many other minor improvements have also been made to improve the service offering and make it less trouble-prone. The most important of which are listed above. For a full description of the new service offering, and for information on how to use the services described above, please refer to the site documentation for the CVS service after the service has been launched: https://www.sf.net/docs/E04 Thank you, The SourceForge.net Team .

1 0

Looking for roundcube developers
by Juha Kumpulainen 12 May '06

12 May '06

Hello We are building scalable email service with web-access to IMAP-backend. Initial system is for 50k users and expandable with 50k blocks. Roundcube looks most promising candidate as web-client, but we anticipate that RC roadmap wont match exactly with ours, so we are looking for experienced roundcube developers to make some modifications in coming months. Terms would be roughly: - new features/files remains under GPL and returned to community, to be merged in official source if applicable - compensation agreed case-by-case, either lump sum per feature or hour compensation One feature we are looking for is search, no specs yet, however. If you are interested this kind of development please reply to juha.kumpulainen(a)gmail.com Thanks for great product! Juha

4 3

Sourceforge
by phil 12 May '06

12 May '06

Just so we don't feel it's just us, here the Fink developers rant about their lack of production due to the extended SF outage... http://ranger.befunk.com/blog/archives/000680.html Sounds like they too are looking for another solution. P -- http://fak3r.com - you dont have to kick it

6 6

Patch for login form with users in syntax username@domain
by Todor Dragnev 11 May '06

11 May '06

Hello list, Here is a fast solution to avoid writing of "@domain" after username when your server hosted virtual domains. With this patch is enought to write only "john" in login form instead of " john(a)virtualdomain.test" If $rcmail_config['add_domain2username'] is true RoundCube will strip domain name from web addresses like: http://webmail.virtualdomain.test/ or http://www.virtualdomain.test/RoundCube/ and add it to username. Changes in config/main.inc.php: =================================================================== // If this is true will use hostname to get domain name $rcmail_config['add_domain2username'] = true; Changes in program/include/main.inc --- start diff --- Index: program/include/main.inc =================================================================== RCS file: /cvsroot/roundcubemail/roundcubemail/program/include/main.inc,v retrieving revision 1.48 diff -u -p -r1.48 main.inc --- program/include/main.inc 23 Mar 2006 22:32:32 -0000 1.48 +++ program/include/main.inc 11 May 2006 14:51:57 -0000 @@ -366,6 +366,19 @@ function rcmail_set_locale($lang) $OUTPUT->set_charset(rcube_language_prop($lang, 'charset')); } +function parse_domain($url) { + $domain = '([a-z0-9]([-a-z0-9]*[a-z0-9]+)?)'; + // Followed by one or max 63 domain characters (dot separated). + // Must be followed by one set consisting a period of two + $regex = '^(' . $domain . '\.)+((' . $domain . '{1,63}\.)'. + $domain . '{2,63}'. + ')$'; + if (ereg( $regex, strtolower($url), $regs)) { + return $regs[4]; + } + return false; +} + // perfom login to the IMAP server and to the webmail service function rcmail_login($user, $pass, $host=NULL) @@ -376,6 +389,14 @@ function rcmail_login($user, $pass, $hos if (!$host) $host = $CONFIG['default_host']; + // parse username for syntax like username@domain + $have_at = explode("@", $user); + if ($CONFIG['add_domain2username'] && sizeof($have_at) == 1) { + if ($domain = parse_domain($_SERVER[HTTP_HOST])) { + $user = $user . '@' . $domain; // add domain from hostname + } + } + // parse $host URL $a_host = parse_url($host); if ($a_host['host']) @@ -1586,13 +1607,18 @@ function rcmail_login_form($attrib) EOF; $OUTPUT->add_script("$JS_OBJECT_NAME.gui_object('loginform', '$form_name');"); - + $domain = strtoupper (parse_domain($_SERVER[HTTP_HOST])) ; $out = <<<EOF $form_start $SESS_HIDDEN_FIELD $fields[action] <table><tr> +<td class="title">Domain</td> +<td class="title">$domain</td> + +</tr><tr> + <td class="title">$labels[user]</td> <td>$fields[user]</td> --- end of diff -- There are no answers, only cross references

3 2

SESSION [URGENT]
by Sid 10 May '06

10 May '06

Hello ! I have a big problem. I am the webmaster of my university website, i worked with IMP before and today i have made a new version of this website integrating Roundcube Web-mail ! But the problem is that this web-mail use mySql to save SESSION data ! it just make my server down ! I want to know if someone know how to change it ! Thank you very much ! PS: excuse my English i am french so, in french : Bonjour J'ai un gros probleme, je vient de sortir un gros site pour mon université aujourd'hui et il utilise Round Cube, cependant vu qu'il utilise mySql pour enregistrer les variables de session, le serveur est HS ! Je voudrais savoir si quelqu'un sait comment changer ça ??? Merci beaucoup d'avance ! Sid

2 1

sourceforge status
by Charles McNulty 10 May '06

10 May '06

The most recent notice from http://sourceforge.net/docman/display_doc.php?docid=2352&group_id=1 ----- ( 2006-05-10 04:43:14 - Project CVS Service ) As of 2006-05-09 the developer CVS server had a disk-failure. As the new CVS infrastructure is in its final phases of rollout, we'll be deploying it, in place of the current infrastructure, by end of week. We'll be sending out an email to project administrators with further details later in the day, regarding how to access the new CVS servers and the changes that occurred with the new infrastructure. ----- Thomas, if you get that email, could you post any relevant details to the list? -Charles

1 0

CVS, SVN, Wiki, Trac
by Thomas Bruederli 10 May '06

10 May '06

Hi everybody I followed the conversation about the SF CVS problem and noticed all the suggestions for switching to SVN, to another server or even to move away from SourceForge. Just to make clear, I'm aware of the current CVS problems and I'm interested in better solution as well as you all are. The reason why I chose SF was the availability of tools without having to configure them by myself. This is something I still don't want to do and what I don't have time for. In October 2005 we discussed about setting up a Trac system which would combine a wiki for documentation, a bug tracker and a SVN server together in one box. We all agreed that this would be a very nice tool for further development. Then somebody offered to install Trac on his server (I don't have a server with Python available) and started setting up the service. Due lack of time, this was not finished and somebody else offered to take care of that and set up a new Trac installation. This was in December 2005. The result of that can be seen at http://trac.roundcube.net/. He imported a snapshot from the CVS and all SF tracker data and I added some styling to the new platform. We discussed some details about user management and some configuration changes and the Trac installation got finished for about 90%. February 26 was the last time I heard from Steeve and asked him for a target date when we can move data from SF to our new platform. Unfortunately an answer is still missing... As you can see, serious attempts were made to move away from SF but the main problem of open source projects is the quick loss of interest and the missing reliability of some project members. I can understand that since I have very little time for the project myself. After almost half a year, I call again for somebody who is willing to install and to maintain a Trac system, which is still a very good solution for our project, I guess. I can provide DNS entries, styles for the Trac site and some adapted Python scripts for importing data from SF. In the mean time, I published another CVs snapshot and we could move to the SF SVN server until we (hopefully) have our Trac platform ready. Comments are welcome... Thomas

9 19

Re: E-mail subject -> hyperlinks
by Richard Green 08 May '06

08 May '06

Charles McNulty wrote: > Well, obviously RC is highly dependent on javascript, which is totally > browser dependent. I don't know to what degree if any mobile browsers > implement javascript. In other words, single-clicking vs. > double-clicking on a cell phone is just the tip of the iceberg in terms > of problems using RC on a cell phone. I guess the question is, what > browser does the cell phone use? (if it's even possible to get that > info) , does that browser implement javascript? and is there a way to > run that browser on a workstation instead of just a cell so that people > can test it without having to get the phone? > > -Charles From my web logs, my phone reports itself as: SAMSUNG-SGH-D500/1.0 Profile/MIDP-2.0 Configuration/CLDC-1.1 UP.Browser/6.2.3.3.c.1.101 (GUI) MMP/2.0 But no, it doesn't support javascript. I guess that you don't subscribe to the belief of gracious degradation then. To me javascript, while being capable of performing wonderful usability enhancing functions, should never be a requirement. Web pages and applications should be able to function perfectly well with JS disabled; JS can certainly be used to make things easier and flashier, but not at the cost of accessibility. I thoroughly recommend reading A List Apart http://www.alistapart.com; they have many many articles about accessibility, none of which advocates reducing your web site / application to an archaic state all in the name of accessibility. I realise that the majority of the functions within the application rely on javascript and I am certainly not trying to say it should all be rewritten, but I think that you should at least provide the ability to READ e-mails for those people using browsers without javascript support. Kevin L. wrote: > I totally understand and agree with Charles' response, and the last > thing I would like to see would be hyper links all over the place as > the current setup is quite beautiful Never heard of CSS? How can something as innocuous as a simple hyperlink make a page ugly? If it's the underlines that bother you, CSS has a remarkable ability that can come to the rescue here... I will have a play with this this weekend and I will try and see how the application functions with added hyperlinks. If I think I can get it to work without breaking any other functions then I will submit the changes to this list for comment. Thanks, Richard

5 6

Send bug?
by Peeyush Singh 06 May '06

06 May '06

Hey guys, I've noticed that sometimes mail isn't being sent, even though the message is coming back as it being successful. I'm in the habit now of checking my Sent mail folder and /var/maillog to see if it actually went out. If it didn't, re-sending it has always worked so far. So I'm perplexed as to what's going on. I haven't dug into the source and haven't really done any diag yet. Thought I'd email you guys first and see if it's a known issue or if others have reported it. I'm running the latest dev tree (as of a few days ago) on FreeBSD 6.0 with courier-imapd and postfix. If you guys would like more info, let me know. I'll dig up what I can. -Regards Peeyush Singh http://www.peeyushsingh.com/

1 0

Unimplemented features?
by Erik 05 May '06

05 May '06

In another thread I read the following: >>> From the mail list, click once (single click, don't double click) >>> the first message, hold shift, select the last message >>> (alternatively you could click "Select all" at the bottom of the >>> mail listing). Drag that to the Trash folder, hit delete, or >>> press the delete button (take your pick ;) ). I've got two questions. First of all, when I hit delete nothing happens (RoundCube CVS checked out May 2; Firefox 1.5.0.3 on Windows). Is this not implemented or is it not supported in all browsers yet? Second question regards the drag-and-drop. It would be nice to have a better indication of which folder you're dropping mail in, e.g. by giving that folder a nice background color. And while composing this mailing I stumbled on to something else: it is not possible to save a message when composing. Am I missing the save button somewhere or is this not yet implemented? -- Regards, Erik

10 19

Re: E-mail subject -> hyperlinks
by Charles McNulty 05 May '06

05 May '06

Bezaleel Support wrote: > current web mail system (Squirrel Mail) with RC, then I am sure my > mobile users might have a complaint or two similar to Richard's. > (Assuming those users do not use a mobile mail client or that I do not > leave a Squirrel Mail install in place for their use....) > > Kevin L. Well, obviously RC is highly dependent on javascript, which is totally browser dependent. I don't know to what degree if any mobile browsers implement javascript. In other words, single-clicking vs. double-clicking on a cell phone is just the tip of the iceberg in terms of problems using RC on a cell phone. I guess the question is, what browser does the cell phone use? (if it's even possible to get that info) , does that browser implement javascript? and is there a way to run that browser on a workstation instead of just a cell so that people can test it without having to get the phone? -Charles

1 0

E-mail subject -> hyperlinks
by Richard Green 05 May '06

05 May '06

Hi all, Something I have noticed and I'm not sure whether this has been attempted before and hence there's a good reason for it not being implemented, but can we make the subjects of e-mails become hyperlinks so that you can just click on them to view the mail? I have tried using RCW on my mobile phone and I can't actually read e-mails without a hyperlink to click. For DDA purposes, it's also a must from my point of view as I couldn't figure out a way of opening a mail with keyboard only (apologies for not RTFM!!); it's just more natural and easy if they're hyperlinks. In addition to this, e-mails with blank subjects would need to display <No Subject> or else there would be nothing to click on! (Something I would actually like to be done anyway; blank subjects stick out like a sore thumb and, due to the off-handedness with which those e-mails are usually written, don't deserve quite that much attention!) -- Richard Green

3 2

Round cube modifications
by Silvio Sisto 04 May '06

04 May '06

Hello, I'm new to the mailing list. I have noticed a few missing features in Round cube that I would like to implement myself. It doesn't have a way to move all mail in the inbox to the trash (you have to do it one page at a time). The same applies to the trash folder. There is no way to empty it in one step. You have to delete one page at a time. I would appreciate any help in doing. Thanks, -- Silvio M. Sisto ------------------------------------

8 12

Javascript question...
by Hasan Ozdil 04 May '06

04 May '06

Hi, I have tried the demo and I'm very impressive by the quality of the webmail :o) As a developer, I 'm wondering how you have done the "loading zone" in the top of the page (the same zone appears to confirm the adding of a contact from an email) I would like to add the same feature to one of my ajax application Thank you, Hasan OZDIL, Brussel Could you answer to my email (hasan dot ozdil at gmail dot com) because I haven't subscribed to the mailing list

2 1

Re: Integrating Googiespell in Roundcube
by Thomas Bruederli 03 May '06

03 May '06

Well, there hasn't been a discussion about that so far. I like it because it just does what I had in mind. Probably we can replace the server side spellchecking with aspell or something similar one day but the client script is very nice. An other thoughts? Thomas On 5/1/06, Chris Richardson <crichardson(a)cantella.com> wrote: > Hi Thomas, > > I though that this option was discarded due to the fact it relies on > google/and or outside resources. > > Thomas Bruederli wrote: > > Thanks for this suggestion Phil. I did not know this project but I now > > gave it a try and integrated GoogieSpell to RoundCube. The whole tool > > still has to be built into the RoundCube interface but for now it's > > ready for testing. > > > > Regards, > > Thomas > > > > > > phil wrote: > >> I have tried the spellcheck option already out there, but want to see about integrating Googiespell [http://amix.dk/projects/?page_id=3] into Roundcube. From the demo you see that it's as slick as it is in Gmail, so I've started another HOWTO to cover this, but can't figure out how to integrate it into the existing 'compose' textarea. Can someone take a look? The documentation on the site makes it look very simple [http://amix.dk/projects/?page_id=3#How_to_use_the_script_] Here's where I am so far with my HOWTO: > >> > >> [..] > >> > >> But I can't figure out where this goes. So far I've created a program/include/rcube_googiespell.inc file with the above, but don't know how it needs to hook into compose.inc. Anyone with a bit more include knowledge out there want to fix it? We only need 1-2 more steps to get this working While it does rely on Google, it is GPL and it 'could' be included in RC, or it could just be another plugin for users to choose from. Either way this is the nicest looking option I've seen, and the most RC like to boot. > >> > >> Thanks > >> > >> P > > > > > > > > The information transmitted is intended only for the person or entity > to which it is addressed and may contain confidential and/or > privileged material. Any review, retransmission, dissemination or > other use of, or taking of any action in reliance upon, this information > by persons or entities other than the intended recipient is prohibited. > If you received this in error, please contact the sender and delete this > material from any computer. > > In accordance with industry regulations, all messages are retained and are subject to monitoring. > > This message has been scanned for viruses and dangerous content and is believed to be clean. > > Securities offered through Cantella & Co., Inc., Member NASD/SIPC. > Home Office: 2 Oliver Street, 11th Floor, Boston, MA 02109 > Telephone: (617)521-8630 > >

10 15

Re: keyboard navigation
by Charles McNulty 02 May '06

02 May '06

Just checked in a couple more changes to keyboard navigation (my specialty). You can now change the focus of the message in the message list by holding down control when using arrow key navigation. It looks great in Firefox, but not so great in IE. If there are any CSS wizards out there that want to take a look at this, feel free. The new class used is in mail.css (#messagelist tr.focused td). Also there were two bugs that I fixed. The first was that after you deleted (or moved) a message if you used the arrow keys to navigate you would still "select" the invisible message. That invisible message is now properly skipped. The second is that upon moving a message the next message was not selected. It now is.. unless it was the last message in the list. I'll address that ASAP. -Charles

13 35

Javascript error?
by sfdevone 02 May '06

02 May '06

Hello, installing the latest dev CVS I get JS error, apparently in this eval: // if we get javascript code from server -> execute it if (request_obj.get_text() && (ctype=='text/javascript' || ctype=='application/x-javascript')) eval(request_obj.get_text()); Firefox JS console shows Error: illegal character Source File: http://www.domain.tld/program/js/app.js Line: 3027 Source Code: ¡&�(1�� Keep in mind that some of my folder names are screwed up (I'm working on resolving this issue when using another charset - folders seem to get messed up while showing fine when language is English). Additionally, it seems that search function is broken for my installation (while it used to work with the latest anonymous CVS). Anyone to give a hint? Can someone else verify this behavior? I am not sure these two issues are related. Ok, more on this... Replacing eval with alert shows: remote response etc etc this.set_unread_count('INBOX', 40); ¡&�(1�� Some of my folders are strangely named but even when I delete all folders and only have INBOX (in English), it still shows it. If anyone needs access to the installation, let me know. Thanks, SF

2 1

Message compose cc and bcc in opera
by Chris Richardson 01 May '06

01 May '06

Just as a heads up the cc and bcc fields when composing a message do not appear correctly I am sure it is just opera miss interptreting something but figured I would let ya all know it does work properly in firefox. I have tested this on roundcube latest cvs version have tested linux opera = no work linux firefox = work window opera = no work IE = work The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete this material from any computer. In accordance with industry regulations, all messages are retained and are subject to monitoring. This message has been scanned for viruses and dangerous content and is believed to be clean. Securities offered through Cantella & Co., Inc., Member NASD/SIPC. Home Office: 2 Oliver Street, 11th Floor, Boston, MA 02109 Telephone: (617)521-8630

2 1

[PATCH] Fix PHP Warning in imap.php
by Mark Bucciarelli 01 May '06

01 May '06

With debug_level = 4, I was getting the following warning output when I clicked on a folder: Warning: mktime() expects parameter 5 to be long, string given in /usr/local/src/roundcube-cvs/roundcubemail/program/lib/imap.inc on line 625 The message index would not display sometimes; for example, 1. click on trash 2. drag message (unread) to inbox 3. click on inbox (yup, msg there) 4. click on trash (no message index displayed) Very strange, as when I viewed the source the table that display the message index was there. When I fixed the warning by casting to an int, the behavior was fixed. # diff -u program/lib/imap.inc.orig program/lib/imap.inc --- program/lib/imap.inc.orig Wed Apr 26 17:01:40 2006 +++ program/lib/imap.inc Wed Apr 26 17:03:01 2006 @@ -611,7 +611,7 @@ //$month_a=array("Jan"=>1,"Feb"=>2,"Mar"=>3,"Apr"=>4,"May"=>5,"Jun"=>6,"Jul"=>7,"Aug"=>8,"Sep"=>9,"Oct"=>10,"Nov"=>11,"Dec"=>12); $month_str=$a[1]; $month=$IMAP_MONTHS[$month_str]; - $day=$a[0]; + $day=(int)$a[0]; $year=$a[2]; $time=$a[3]; $tz_str = $a[4]; # I'll stick this (and my README patch) in sf.net as a patch so it doesn't get lost in the mailing list. -- Mark Bucciarelli GAIA Host Collective, LLC web: http://www.gaiahost.coop ----------------------------------- ~~~~~~~~~~~~~~~~ "Reliable internet solutions from an environmentally and socially concerned worker collective" ~~~~~~~~~~~~~~~~

3 3

Integrating Googiespell in Roundcube
by phil 01 May '06

01 May '06

I have tried the spellcheck option already out there, but want to see about integrating Googiespell [http://amix.dk/projects/?page_id=3] into Roundcube. From the demo you see that it's as slick as it is in Gmail, so I've started another HOWTO to cover this, but can't figure out how to integrate it into the existing 'compose' textarea. Can someone take a look? The documentation on the site makes it look very simple [http://amix.dk/projects/?page_id=3#How_to_use_the_script_] Here's where I am so far with my HOWTO: ----- cd /usr/local/www/data-dist/ cp -Rp roundcube roundcube-dev cd roundcube-dev wget http://amix.dk/projects/uploads/googiespell_v3.zip unzip googiespell_v3.zip cp googiespell_v3/googiespell/AmiJS.js googiespell_v3/googiespell/googiespell.js program/js/ cp googiespell_v3/googiespell/googiespell.css skins/default/ ----- After this is done, it says to add "...the code you will need to decorate a textarea with GoogieSpell: <form> <textarea id="ta1" class="textarea">Ths is a tst</textarea> </form> <script type="text/javascript"> var googie1 = new GoogieSpell("googiespell/", "http://www.google.com/tbproxy/spell?lang="); googie1.decorateTextarea("ta1"); </script> But I can't figure out where this goes. So far I've created a program/include/rcube_googiespell.inc file with the above, but don't know how it needs to hook into compose.inc. Anyone with a bit more include knowledge out there want to fix it? We only need 1-2 more steps to get this working While it does rely on Google, it is GPL and it 'could' be included in RC, or it could just be another plugin for users to choose from. Either way this is the nicest looking option I've seen, and the most RC like to boot. Thanks P -- http://fak3r.com - you dont have to kick it

3 2

Large mailboxes
by Mark Edwards 01 May '06

01 May '06

Roundcube seems to have some difficulty dealing with large mailboxes (large meaning thousands of messages). It can manage indexing one of these, but if I try to actually show a message in a large mailbox, it basically hangs. When this happens, the browser just sits there waiting for a reply, and I can do a 'top' on the server and watch the apache process just eat up memory until it finally dies. It seems that Roundcube is digging through the mail and not releasing memory in some way, which becomes a problem as the mailbox size gets large. At least that's my theory. Does anyone else observe this? This is with Apache 1.3.34, PHP 5.1.2, MySQL 4.1.18 and Cyrus 2.2.12, running on FreeBSD 4.11p14. Thanks! -- Mark Edwards

16 42

[PATCH] tinyMCE HTML editor
by Salvatore Ansani 01 May '06

01 May '06

Hi guys, attach is patch to use tinyMCE HTML editor on roundcube. I didin't found any error on sendig TEXT or HTML mails. Hope you too ;) Download tinyMCE and extract it on same folder of roundcube (so we have in root roundcube folder this tree: tinymce/jscripts/tiny_mce/) Play and FIND bugs :) -- Bau, Salvatore -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GIT d- s:+++ a- C++++ UL++ P++ L++++ E--- W+++ N+++ o+ K+++++ w+ O+ M+ V-- PS--- PE+ Y+++ PGP t--- 5 X R++ tv++ b++++ DI+ D++ G+ e++ h+ r++ y++ ------END GEEK CODE BLOCK------

2 1

Some changes on priority treatment..
by Krishna Oliveira de Hollanda Padilha 30 Apr '06

30 Apr '06

Hi All, I've made some changes on the way that priority emails are treated, if the chosen priority is High or Highest I've managed to add Disposition-Notification and Return-Recept to message. The code snippet is (it must be changed on sendmail.inc on lines 131-141): if (!empty($_POST['_priority'])) { $priority = (int)$_POST['_priority']; $a_priorities = array(5=>'lowest', 4=>'low', 2=>'high', 1=>'highest'); if ($str_priority = $a_priorities[$priority]) $headers['X-Priority'] = sprintf("%d (%s)", $priority, ucfirst($str_priority)); if ($a_priorities[$priority] < 3) { $headers['Return-Receipt-To'] = $identity_arr['string']; $headers['Disposition-Notification-To'] = $identity_arr['string']; } } Regards, Krishna Padilha

2 2

Composing HTML mails
by Salvatore Ansani 30 Apr '06

30 Apr '06

Hi guys, I've done some patchs to use HTML TinyMCE editor to compose (and send of course ;) ...) HTML emails. If anyone want to test and use this HTML editor, I can upload patchs to my website or send to M/L -- Regards, Salvatore -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GIT d- s:+++ a- C++++ UL++ P++ L++++ E--- W+++ N+++ o+ K+++++ w+ O+ M+ V-- PS--- PE+ Y+++ PGP t--- 5 X R++ tv++ b++++ DI+ D++ G+ e++ h+ r++ y++ ------END GEEK CODE BLOCK------

3 2

Re: major change to deletion process
by Charles McNulty 28 Apr '06

28 Apr '06

Derek Hinchliffe wrote: > On 4/28/06, Charles McNulty <charles(a)charlesmcnulty.com> wrote: > .... >> 2) If you don't have a trash folder defined messages are flagged as >> deleted and the deleted style is applied to them. >> By default the deleted style will be "display: none" meaning they >> will disappear and things will appear to have not changed > > Just a quick comment... > > If CSS 'display:none' is used to hide the deleted messages will things > like the display of how many messages are shown (eg. "Messages 1 to 30 > of 300") be misleading? Also, could it interfere with list > manipulation routines like "Select All" - possibly resulting in > messages being selected that you weren't expecting to be? > > Cheers > Derek > Possibly. I'll look into that. In the current system they are also set to display: none, but in a more direct way. In the new system the row has a new class appended to the className. In the old system the style was assigned display: none directly. In the old system to detect if a message was hidden was trivial, just look at the style. In the new system you have to look at the class to see what display is set to. I know that that was never done elsewhere in the code, so it's possible that totals could be messed up. -Charles

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Dev