- Dev - Roundcube mailing lists

Rules plugin
by simplexe 04 May '08

04 May '08

Hi all I,m rewrite mail rules diff from http://lists.roundcube.net/mail-archive/dev/2006-12/0000163.html and update to the latest revision r1353. see screenshot. -- С уважением, Солдатов С.В. --- 8< --- detachments --- 8< --- The following attachments have been detached and are available for viewing. http://detached.gigo.com/rc/kg/Sa779DV3/rules.png http://detached.gigo.com/rc/kg/Sa779DV3/rules.patch Only click these links if you trust the sender, as well as this message. --- 8< --- detachments --- 8< --- _______________________________________________ List info: http://lists.roundcube.net/dev/

1 0

not able to read forwarded messages that are attachments
by Jason Levine 30 Apr '08

30 Apr '08

Hi , I think this must be a configuration issue, but I am not able to read any forwarded messages that are sent as attachments. All I get is the "Subject" "To" "From" and "Time" I can read any other attachements and everything else is working beautifully. any suggestions on where to start ? Thanks, Jason Levine Wired Hosting 925 570-4886 _______________________________________________ List info: http://lists.roundcube.net/dev/

2 9

fourat wants to keep up with you on Twitter
by fourat 30 Apr '08

30 Apr '08

To find out more about Twitter, visit the link below: http://twitter.com/i/334a0182a0788dc095c252c5ca66a224ae7ae2fb Thanks, -The Twitter Team About Twitter Twitter is a unique approach to communication and networking based on the simple concept of status. What are you doing? What are your friends doing—right now? With Twitter, you may answer this question over SMS, IM, or the Web and the responses are shared between contacts. _______________________________________________ List info: http://lists.roundcube.net/dev/

4 3

after some profiling..
by Justin Heesemann 30 Apr '08

30 Apr '08

here's a small patch for 0.1.1 for large imap folders when the imap server supports sorting the speed increase is vast. on my very slow epia box it took 90+ seconds to browse my 14k email inbox (only showing the first 40!). after the patch down to about 6 seconds. there's a fix to rep_specialchars_output as well, as at least php5.2.5 seemed to always recreate the js_rep_table (which takes a lot of time, about 3 seconds or so on my slow system) --- 8< --- detachments --- 8< --- The following attachments have been detached and are available for viewing. http://detached.gigo.com/rc/gb/cCronKdx/performance-jh1.diff Only click these links if you trust the sender, as well as this message. --- 8< --- detachments --- 8< --- _______________________________________________ List info: http://lists.roundcube.net/dev/

6 6

user preferences
by A.L.E.C 30 Apr '08

30 Apr '08

I see that there're many options in config which should be accessible via user preferences. I.e.: read_when_deleted, flag_for_deletion, mdn_requests, message_sort_col, message_sort_order, list_cols. I want to add them there. Any objections? Second question: Now we have two sections there: UI settings and server settings. Maybe we should split preferences in different way, any suggestions? -- Aleksander 'A.L.E.C' Machniak http://alec.pl gg:2275252 LAN Management System Developer http://lms.org.pl Roundcube Webmail Project Developer http://roundcube.net _______________________________________________ List info: http://lists.roundcube.net/dev/

2 3

Tiny update of the Norwegian translation.
by Thor Marius K.H. 27 Apr '08

27 Apr '08

I took the 30 seconds of time to translate the last remaining strings for Norwegian. Would be nice to see this added, though it's not in a hurry. Thor. --- 8< --- detachments --- 8< --- The following attachments have been detached and are available for viewing. http://detached.gigo.com/rc/C3/ZTUS35UF/labels.inc Only click these links if you trust the sender, as well as this message. --- 8< --- detachments --- 8< --- _______________________________________________ List info: http://lists.roundcube.net/dev/

1 0

Featurerequest: Changing Password feature
by sargodarya＠generation-fx.com 25 Apr '08

25 Apr '08

Thought it would be a nice feature if it would be possible to select a second database while installation which holds a virtual user table with passwords. I think at least half of the most mailserver administrators are having their virtual user information stored in a sql database holding their passwords as md5 hashs. I think it should be possible to let them enter a second db, tablename and check a checkbox to let a logged in User be able to change his password in the settings. This should increase the flexibility of this system for users at least a small bit and I think it should be worth the effort. I would like to hear feedback about this just in case there is real interest in this. _______________________________________________ List info: http://lists.roundcube.net/dev/

2 1

[PATCH] Create .Trash on-the-fly
by Martin Spuetz 24 Apr '08

24 Apr '08

Hello roundcube-Team, i wrote a tiny patch that creates .Trash if it doesn't exist when you delete an email. > --- program/steps/mail/move_del.inc 2008-02-05 22:39:08.000000000 +0100 > +++ program/steps/mail/move_del.inc 2008-04-24 09:54:24.000000000 +0200 > @@ -28,8 +28,16 @@ > { > $count = sizeof(explode(',', ($uids = get_input_value('_uid', RCUBE_INPUT_POST)))); > $target = get_input_value('_target_mbox', RCUBE_INPUT_POST); > + > + // create .Trash folder if it doesn't exist > + if ($target == "Trash") { > + if (!in_array_nocase($target, $IMAP->list_mailboxes())) { > + $IMAP->create_mailbox($target, TRUE); > + } > + } Nice work, guys! Greetings, martin _______________________________________________ List info: http://lists.roundcube.net/dev/

2 1

Message filters
by Javier Smaldone 21 Apr '08

21 Apr '08

Hi guys. Mi customers are claiming for mail filtering capabilities in RoundCube. As I can see, that feature is listed in the "later" milestone. Could be possible to include it in the near future? Thanks and congratulations to the RC team. -- Javier Smaldone javier(a)smaldone.com.ar http://www.smaldone.com.ar/ - http://blog.smaldone.com.ar _______________________________________________ List info: http://lists.roundcube.net/dev/

2 1

Japanese translation update
by Taka 19 Apr '08

19 Apr '08

Here is the japanese updated translation. --- Taka --- 8< --- detachments --- 8< --- The following attachments have been detached and are available for viewing. http://detached.gigo.com/rc/f7/6jVPhags/japanese.tar.gz Only click these links if you trust the sender, as well as this message. --- 8< --- detachments --- 8< --- _______________________________________________ List info: http://lists.roundcube.net/dev/

1 0

Re: [RCD] virtuser_query does not work in roundcube 0.1.1
by André Bauer 17 Apr '08

17 Apr '08

Hallo till, am Mittwoch, 16. April 2008 um 01:45 schrieben Sie: t> There should be logs in logs/ which contain possible errors. I am not t> sure where else to look. t> Have you tried those yet? Yes. There are no errors logged when logging in or send mail. t> Also, let us know which version you are running! Its version 0.1.1 ( see subject ;-) ) t> Till -- Greets André Bauer mailto:monotek@gmx.net _______________________________________________ List info: http://lists.roundcube.net/dev/

1 0

Ticket #1484545 (HTML signatures on IE)
by Eric Stadtherr 16 Apr '08

16 Apr '08

I finally tracked down what was happening here (and why it was intermittent). It turns out that calling "setTimeout(func, delay)" on IE doesn't actually set a timeout - it must be called as "window.setTimeout(func, delay)" to actually introduce the delay. The unqualified call works on other browsers, just not IE. I also had to bump up the call_init delay to 500 milliseconds on Windows to get it to work reliably (200 ms seemed to be enough on the Mac OS browsers). This could be a consequence of running Windows on Parallels, but I haven't seen systemic performance issues on Parallels before so I suspect it's just the Windows JavaScript implementation. If anyone wants to run some tests with 200 ms on a fully native Windows installation, we could revert that part of the fix. -- Eric Stadtherr estadtherr(a)gmail.com [1] Links: ------ [1] mailto:estadtherr@gmail.com _______________________________________________ List info: http://lists.roundcube.net/dev/

1 0

virtuser_query does not work in roundcube 0.1.1
by Andrè Bauer 15 Apr '08

15 Apr '08

Hallo. Is use roundcube a couple of months now and it worked like a charm. Now i tried to get roundcube work with "virtuser_query" via connfixx 1.6 (premium) email table. Therefore i gave the roundcube db user select rights on the confixx email table. In main.inc.php i added: $rcmail_config['virtuser_query'] = 'SELECT concat( prefix, "@", domain ) AS address FROM confixx.email WHERE pop3 = "%u" LIMIT 1'; If i execute this query via PHPMyadmin i get the email address shown like "yourmail(a)domain.de". Unfortunately it does not work in roundcube. The imap login works but if i send mail the from header is missing in the received mail. In roundcube (sent messages) the header has only a empty from. Where is the error? Is there a possibility to get debug output or something? -- Greets André Bauer _______________________________________________ List info: http://lists.roundcube.net/dev/

2 1

Trunk updated to PHP5
by Thomas Bruederli 15 Apr '08

15 Apr '08

Hi everybody I just wanted to let you know that with revision 1291 the trunk version of RoundCube definitely dropped support for PHP 4. If you have a SVN checkout running on a PHP 4 installation you better not do an svn up. Also it's possible that the trunk is broken and comes up with some nasty errors. If you can fix them you're welcome to submit some patches, otherwise please report them to me. Don't open tickets for errors that were obviously introduced with the changes in r1291. Regards, Thomas _______________________________________________ List info: http://lists.roundcube.net/dev/

6 22

IMAP folder collapse and expand
by leo.liu 14 Apr '08

14 Apr '08

Hi all, I am working in Griffith College Dublin. We use roundcube as a webmail system for all of our staff. I've been given a project by my manager to implement collapsing and expanding of imap subfolders, as you would see in mail clients like thunderbird. I'm just wondering, is anyone else working on this already? Thanks. Regards, Leo _______________________________________________ List info: http://lists.roundcube.net/dev/

3 6

[OT] AppEngine
by till 14 Apr '08

14 Apr '08

Totally off-topic - sorry for the Spam. ;-) If you heard of Google AppEngine, there is a thread to make Google support PHP too, head on over: http://code.google.com/p/googleappengine/issues/detail?id=13 Make sure you "star" the issue (there is a "star" on the top) which is like the way to cast your vote. All those "+1" comments don't actually mean anything. AppEngine is Google's attempt to provide developers with scalable infrastructure (think Amazon, S3+ec2+SimpleDB). Till _______________________________________________ List info: http://lists.roundcube.net/dev/

1 0

inconsistent check-recent behaviour
by Aleksander Machniak 14 Apr '08

14 Apr '08

We have two UI modes, with or without preview pane. In preview-pane mode on each keep_alive timeout is executed 'check-recent' action which searches for recent messages and sets unread counters on folder list, quota, etc. When we're working without preview pane on messages list we've got the same behaviour, but when switching to message view there executed is only 'keep-alive' action. Proposition: Call 'check-recent'-like action instead of 'keep-alive'. We've got folders list which should be updated like in preview-pane mode. We have also a performance issue here, because 'getunread' action is called after each message preview which increases load and slows down moving from one message to another. When working in preview-pane mode 'getunread' is called only on folder selection. Proposition: Don't call 'genunread' action when 'show' action was called. Does it make sens or I miss something? -- Aleksander 'A.L.E.C' Machniak http://alec.pl gg:2275252 LAN Management System Developer http://lms.alec.pl _______________________________________________ List info: http://lists.roundcube.net/dev/

4 16

Re: [RCD] [RCU] any info on performance on large sites?
by Dennis Ortsen 10 Apr '08

10 Apr '08

Hello Maximilien, I posted a question about performance figures on large sites with Roundcube a few days ago. You replied on the dev list saying that a french ISP is using RC. Do you happen to know which ISP this is? Thanks in advance, Br. Dennis _______________________________________________ List info: http://lists.roundcube.net/dev/

2 1

virtusers from LDAP
by pete 10 Apr '08

10 Apr '08

hi, the virtusers featute is nice, can you give me some pointers about how and where to change code (hints, style, policies if any) to add the possibility to get this information from LDAP? The situation is our imap server does the auth from LDAP and all the required info can be looked up from the directory (and this is the only place where the information is stored). Without this a new user get a foo(a)127.0.0.1 from-address and there are multiple domains so i can't simply hard-wire one. i did a quick mock-up to prototype the ldap query, and it works, now it just need to be integrated into RDC :) best, Peter _______________________________________________ List info: http://lists.roundcube.net/dev/

1 0

[Fwd: Re: [RCU] any info on performance on large sites?]
by Dennis Ortsen 10 Apr '08

10 Apr '08

Hi Jami, Charles replied to me about your answer on the dev list. I must have missed your answer. My only reference point is what we currently have on servers and applications. Which are one backend server (dual CPU, 4 GB memory) with Cyrus and the mailboxes (maildir style) and one frontend server (dual CPU, 1GB memory) with IMP 3.1. This setup performs really good. We are planning a few upgrades. First we will upgrade the backend to a quad core CPU with 8 GB RAM and storage will now not be located on local disks but on a SAN. We expect that the new backend will perform awesome with these specs. After the upgrade, we plan to enlarge the mailboxes. The current quota is 25 MB per mailbox. We're thinking about 1 GB per mailbox (no problem with our SAN). This increase should not affect backend performance. After the backend upgrade, we'd like to upgrade the front end with a new webmail client that needs less change in code to integrate. (IMP needs a lot more tweaking than RC). I've read several posts about bad performance with RC on large mailboxes (over 2000 mails in one folder) and with a large folder list. Bottomline is that RC performs well when you have a small mailbox with not too much emails (about 100). If we increase the size of the mailboxes, that would also increase the time needed for the webmail client to present the mailbox list (with seen/unseen messages) and the contents. What I'm interested in is: - how much mailboxes does RC serve at your Campus? - how much simultaneous IMAP connections do you usually see (peak), with the use of an imap proxy (we use that as well)? - how is the server setup? is that similar to ours? - have you used any form of caching or load balancing with RC (2 front end servers, MySQL message caching feature of RC?)? - which version of RC are you using at the moment? The RC2 or the stable version? I hope you can help me with some info. Thanks in advance, Br. Dennis -------- Original Message -------- Subject: Re: [RCU] any info on performance on large sites? Date: Wed, 9 Apr 2008 17:24:21 -0500 From: chasd <chasd(a)silveroaks.com> To: Dennis Ortsen <dortsen(a)gmail.com> References: <47FBAFEA.8080503(a)gmail.com> <6039A7FF-6531-4C76-B903-3B1965B2D8CA(a)silveroaks.com> <47FD3732.8080902(a)gmail.com> > I contacted someone at Maine University. The IT group seems quite > large and not centrally organised. There are 7 campus sites. I'm > told there are rumors that one campus is looking at or using > Roundcube, but no one really seems to know which campus. They > suggested that I'd ask the person who gave me that tip (that's > you ;-) if you know which campus your nephew is going to. They > might direct me to the right person with that information. I'm replying as a PM because it seems we are the only ones communicating, and it isn't a subject that impacts most users. If you feel the Users list should get a copy, let me know and I can re-send. I posted my first reply to both the Users list and the Developers list since you addressed your original message to both lists. I thought you would have seen the reply from someone at UMaine Farmington on the devel list. Since you seem to have missed it, Ill quote it here : > Hi all, > I rolled out Roundcube on our Farmington Campus intranet last > summer. To my knowledge this is not being used by other UMaine > campuses. I had to tweak the login code to meld with our existing > authentication process. The most notable bump in the road was our > need for an imap proxy. The system was getting very high IMAP > connection rates. Once we started using the imap proxy, all worked > pretty well. > > What kind of solid info are you looking for? > > Jami That message was from Jami Holmes, and his e-mail address is jholmes(a)maine.edu if you would want to contact him off list. If you subscribe to the Devel list, you might want to look in your spam quarantine or something that would have caused you to miss that message from the 8th. HTH, Charles Dostale System Admin - Silver Oaks Communications http://www.silveroaks.com/ 824 17th Street, Moline IL 61265 _______________________________________________ List info: http://lists.roundcube.net/dev/

1 0

format=flowed
by Aleksander Machniak 10 Apr '08

10 Apr '08

In rcmail_print_body() we have: if ($part->ctype_parameters['format'] != 'flowed') $body = wordwrap(trim($body), 80); I'm not shure that we should wrap lines for displaying messages, maybe do this only when sending (composing) them? I have a mail without format definition in header and Thunderbird didn't wrap the lines. Roundcube do wrapping and output is broken. I think, when displaying a message we should have something like that if( format == flowed) rewrap lines according to rfc2646 or do nothing elseif (wrap_new_mail_on_display_option == true) wrap lines else do nothing -- Aleksander 'A.L.E.C' Machniak http://alec.pl gg:2275252 LAN Management System Developer http://lms.alec.pl _______________________________________________ List info: http://lists.roundcube.net/dev/

3 2

performance
by A.L.E.C 09 Apr '08

09 Apr '08

Clicking on message generate two requests: "GET /?_task=mail&_action=preview&_uid=414&_mbox=Spam&_framed=1 HTTP/1.1" 304 26 "POST /?_task=mail&_action=mark HTTP/1.1" 200 205 and one login to imap server for each. I think such "related actions" should be done with one imap connection and one request. -- Aleksander 'A.L.E.C' Machniak http://alec.pl gg:2275252 LAN Management System Developer http://lms.org.pl _______________________________________________ List info: http://lists.roundcube.net/dev/

3 10

Re: [RCD] [RCU] any info on performance on large sites?
by chasd 08 Apr '08

08 Apr '08

On Apr 8, 2008, at 12:48 PM, Dennis Ortsen wrote: > Hi everyone, > > I've searched the forum to find any solid info on performance > statistics, but was unable to find anything I can relate to. I work > at a > university with about 30.000 students. My nephew attends the University of Maine - Farmington, and he is visiting here in the midwest this week. I glanced over his shoulder when he used my home computer to check his e-mail, and lo and behold I saw RoundCube in an iframe. I don't know if RC is rolled out to all of the umaine.edu campuses, or just the one he attends. When I asked him about the web mail system, he said it was a recent switch. I'm not sure if the umaine.edu people frequent these lists. If not, since you are associated with a university, they might be responsive if you contact them directly. Charles Dostale System Admin - Silver Oaks Communications http://www.silveroaks.com/ 824 17th Street, Moline IL 61265 _______________________________________________ List info: http://lists.roundcube.net/dev/

3 2

Update v0.1.1 released
by Thomas Bruederli 07 Apr '08

07 Apr '08

Dear RoundCube users The first service update for RoundCube Webmail 0.1-stable is now available. It contains important bug fixes and updates of some incomplete localization files. We recommend to update all installations of 0.1-stable. Download the package from https://sourceforge.net/project/downloading.php?group_id=139281&filename=ro… and read the UPGRADING instructions to find out how to update. Note: this update is still compatible with PHP 4 but future releases will only run on PHP 5. Have fun! ~Thomas _______________________________________________ List info: http://lists.roundcube.net/dev/

2 1

Fwd: Re: Update v0.1.1 released
by pete 06 Apr '08

06 Apr '08

-------- Original Message -------- Subject: Re: [RCD] Update v0.1.1 released Date: Sun, 06 Apr 2008 11:09:50 +0200 From: pete <pete(a)teamlupus.hu> To: Thomas Bruederli <roundcube(a)gmail.com> hi, On Sat, 5 Apr 2008 16:24:34 +0200, "Thomas Bruederli" <roundcube(a)gmail.com> wrote: > Dear RoundCube users > The first service update for RoundCube Webmail 0.1-stable is now > available. It contains important bug fixes and updates of some > incomplete localization files. We recommend to update all > installations of 0.1-stable. Download the package from > https://sourceforge.net/project/downloading.php?group_id=139281&filename=ro… > and read the UPGRADING instructions to find out how to update. there is a missing ';' in the mysql.update.sql command file, at the end of line 7. And sorry for bothering you with direct reply, Thomas! :) best, Peter _______________________________________________ List info: http://lists.roundcube.net/dev/

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Dev