- Dev - Roundcube mailing lists

Multiple IMAP servers per account?
by Joshua Kugler 04 Nov '05

04 Nov '05

After taking a cursory look through the archives, I didn't see this mentioned. I'll name the scenario, then the feature request. While traveling, we'd like to have access to *all* our e-mail, including all the folders into which we've filtered our mail. We could do this by putting all our folders on the mail server, but our university mail server is restricted to 100MB. My local Mail folder is up to 275MB, and I'm probably low. So, what we'd like to do is run a department IMAP server for all our personal folders, and continue to use the university IMAP server for incoming mail/sent mail, etc, in other words, the small set of default folders. Feature request: A user can log into two IMAP servers in one session and move mail across servers. Possible? Doable? How hard? j----- k----- -- Joshua Kugler CDE System Administrator http://distance.uaf.edu/

1 0

Trac System & SVN?
by Stephan Dahlmann 04 Nov '05

04 Nov '05

Hi again, I don't want to bother the list with this topic but... What's the status of the Trac/SVN System? I don't remember who wanted to build it up, if I did i would write him/her directly. The thing is: I tried to setup an environment like that for a friend and was quite successfull ;-). So it isn't so hard to setup a Trac/SVN system in my opinion. Mine is running fine. I would offer it to the community, but there's currently no backup strategy for that server. That means: a hardware crash or a serverhack and all data could be lost. Instead of that i want to offer my help to whoever wanted to set it up. I hope this doesn't sound arrogant, maybe there are other things I didn't think of... I just want to help :) My setup is based on a Debian Sarge System, i did some Documentation here: http://wiki.mift.de/ greetings, stephan

1 0

Server field to not show
by Adis Salcin 04 Nov '05

04 Nov '05

I am looking in solution how to disable Server field in roundcube 21.10 relese. I look at the config and and everywhere but cant find it(mybe it is there but i cant recognize it) :((.. Thnx and keep up good work :). Also when i am trying to send mail to this list trought SMTP server i get this: 04.11.2005, 19:17:31: SEND - sending mail messages - 1 messages in queue 04.11.2005, 19:17:33: SEND - connected to SMTP server 04.11.2005, 19:17:33: SEND - sending message to dev(a)lists.roundcube.net 04.11.2005, 19:17:34: SEND - The last address submitted was <dev(a)lists.roundcube.net> !04.11.2005, 19:17:34: SEND - Message has not been sent. Server reply - Dynamic IP Addresses See: http://www.sorbs.net/lookup.shtml?84.112.63.27 04.11.2005, 19:17:35: SEND - connection finished - 0 messages sent 04.11.2005, 19:17:35: SEND - Some messages were not sent - check the log for details. Trought webmail(and phpmail i think it work normaly)

1 0

It's slowly when i have lots of messages.....
by Felipe Batista Retke 04 Nov '05

04 Nov '05

Hi people, I'm using just RoundCube to test it, and I saw that when I enter in a folder where there're lots of messages ( 1000 more or less... :) ) It's so slowly to Load. I'm sory but I don't know if it's a problem of my courierImap or the roundcube, because with SM I had the same situations but i was faster then roundcube. I dont want to compare but... In Gmail when I've folder with 1000 messages I think it loads so fast, I dont know, maybe they just "read" the 50 messages per page and after they "read" the others. Please. If Possible can anyone tell me your opinion about it ? Thanks All you so Much; Peace... Felipe.

1 0

post-install problem
by Auke Kok 04 Nov '05

04 Nov '05

Hi guys, first of all, please add some descriptive information to the INSTALL file that points to proper documentation on how to initialize these databases. Mysql has plenty, but sqlite has none by itself - only needs to be one line of text. Second, after installing and setting up the DB I get the following after logging in: DB Error in /var/roundcubemail/program/include/rcube_db.inc (63): DB Error: extension not found Fatal error: Call to undefined function: query() in /var/roundcubemail/program/include/rcube_db.inc on line 124 php-4.4.0, pear has SQLite 1.0.3, and I'm running apache-2.0.5x. Any clues? I cant get google to turn me up with helpful info. Auke

3 3

interface gets redirected;
by Shaun Lloyd 04 Nov '05

04 Nov '05

i have a shared hosting packed which has a cPanel interface management console (if that helps) the server uses a neomail webmail interface that is provided as part of my hosting package. My problem is that when l upload the roundcube script to the server and attempt to login the server redirects me to the standard web interface. i hope this makes sense and someone can help. thanks in advance, shaun lloyd

3 2

Cosmetic problem with new menu in Firefox
by Glen Carreras 04 Nov '05

04 Nov '05

Hi, I've been testing RC (CVS) for a few days now and am impressed with the clean look and the speed. I've noticed one problem that no one else seems to be reporting on. Since the move of the menu items from the bottom of the webpage to the upper portion, I have been seeing that part of the menu bar distorted (blackened). It appeared normally when it was located at the bottom, and it currently appears normally in IE. I am thinking it might just be a FF problem. Anyway, just thought I would make you aware and ask if you had any suggestions for resolving it. I'm running the latest nightly build of FF on a Dell Inspiron @1600x1200. I'm attaching a small jpg to illustrate what I am seeing. Thanks, Glen

3 3

Attach File
by Felipe Batista Retke 04 Nov '05

04 Nov '05

Hi there. I tryed to attach a file and it works ok, but if I attach the wrong file I can't remove it from the file list. Anyone Know Why? Thanks A lot. Felipe.

2 1

pulldown menu in default_host
by Americo C Calzada de Luna 04 Nov '05

04 Nov '05

Hi list. I have read the mail archive of roundcube and some docs and can not find the way for implementing the pulldown menu in $rcmail_config['default_host'] = ''; in others words i cant find the syntax to create a list of hosts to display a pulldown menu. I have the users mail in tree servers. i need the pulldown menu. if someone know the systax please tell me. ------------------------- // the mail host chosen to perform the log-in // leave blank to show a textbox at login, give a list of hosts --> there is not a example syntax :( // to display a pulldown menu or set one host as string. // To use SSL connection, enter ssl://hostname:993 $rcmail_config['default_host'] = ''; -------------------------- Best regards, Americo

3 2

[PATCH] don't allow saving of contacts with empty name and email
by Justin Randell 04 Nov '05

04 Nov '05

howdy, patches submitted here: http://sourceforge.net/tracker/?func=add&group_id=139281&atid=742849 testing and comments welcome. cheers justin

2 1

Re: post-install problem
by Auke Kok 03 Nov '05

03 Nov '05

> This message means, that your PHP does not provide SQL support. As far > as I know, SQLite is only available with PHP5. > > Use phpinfo() to get details about your PHP installation and the > included extensions. > > Thomas indeed, and I got it to work with mysql properly afterwards without problems, however I don't like mysql running just for roundcube, so tossed it and tried php5. After switching to php5 (no mysql), the result is evenly miserable: DB Error in /var/roundcubemail/program/include/rcube_db.inc (63): DB Error: no database selected Fatal error: Call to undefined method DB_Error::query() in /var/roundcubemail/program/include/rcube_db.inc on line 124 the sqlite db is initialized and found properly, and writeable. Auke

1 0

Odd error message tring to load index.php
by Robi 03 Nov '05

03 Nov '05

Guys, After resolving a few db problems, I can no longer seem to get the front page to come up, all that I get is a nice blank white page with "No input file specified." text printed. So far I haven't been able to find the source of the message, so if anyone knows where it is and what it pertains to, please reply. -- Robi

1 0

Congratulations / Address Book problem
by Alain De Carolis 03 Nov '05

03 Nov '05

Hello. First of all I want to congratulate with the developers for this wonderful project! (Where is the donate button???) Even if its still in alpha release, this is by far the most appealing webmail I have ever seen! Here are two little bugs I have run trought using both the lastest release and the latest CVS snapshot: 1) The recipient selection on the address book does not show up. The address book is correctly populated with some entries, I tried with two different installation on two different machines: one with the v0.1-20051021 and the other with the CVS check out. I tried IE6 and Firefox 1.07 on both Windows and Linux. I even tried the demo on the Roundcube website. Same result... no recipient pick-up at all. 2) I have a 1 MB message that just hangs the system forever. Once you double-click on it you're stuck and all you can do is close the browser or manually enter another URL. My systems are a fully updated debian woody running the v0.1-20051021 on mysql and a fully updated centos 4 running the most recent CVS co on MySQL as well. I use the Italian localization. I double checked every message on the archive and I seem to be the only one reporting this Address book problem... Am I doing something wrong? Thanks

1 0

A little problem
by JOSE A. HERRAN 03 Nov '05

03 Nov '05

Hi, I just working with round cube for a couple of days, but i encounter a little problem for me. I use both evolution an round cube to connect to a imap server, but after trying round cube, when i connect using evolution, i can't see inbox messages on it. But, i can see trash and send items in a right way. Anyone have an explain for it? Thanks for all. Regards. Jose

1 0

some bugs?
by Longinos Ferrando 03 Nov '05

03 Nov '05

Hi all. I tried the RC from the latest CVS (3/11/2005 7:00am) with postgresql as backend database and I get some errors. If I use Firefox 1.0.7 I get the message : "Your browser does not accept cookies" and , off course, the browser has the cookies enabled. In MS Iexplorer: With $rcmail_config['enable_caching']='TRUE'; blank screen and in error log I get "/var/www/html/horde/program/include/rcube_db.inc on line 148", then I configure it to FALSE. I tried with $rcmail_config['db_backend'] set to db When I try to send a mail w/o identities, I get a error message that says the message have not sender. Then I insert 1 contact, I get the error: *DB Error in /var/www/html/horde/program/include/rcube_db.inc (189):* DB Error: unknown error SERVICE CURRENTLY NOT AVAILABLE! DB Error: unknown error and get 2 contacts inserted, I eliminate 1 and then I can send the message. If I try to insert a new identity I get the same message but the record is inserted. If I try to insert a contact, I get the error: [03-Nov-2005 11:57:07 +0100] DB Error: DB Error: unknown error; QUERY: INSERT INTO contacts (user_id, name, firstname, surname, email) VALUES (?, 'aa', 'aa', 'aa', 'aa') in /var/www/html/horde/program/include/rcube_db.inc on line 148 [03-Nov-2005 11:57:07 +0100] DB Error: DB Error: unknown error in /var/www/html/horde/program/include/rcube_db.inc on line 189 and no contact are inserted. With the MDB2: If I try ti delete a identity I get the message *Fatal error*: Call to undefined function: affectedrows() in /var/www/html/horde/program/include/rcube_mdb2.inc on line 189 and the identity is deleted.* *I I try to insert a contact I get the mesage:* *[03-Nov-2005 11:57:07 +0100] DB Error: DB Error: unknown error; QUERY: INSERT INTO contacts (user_id, name, firstname, surname, email) VALUES (?, 'aa', 'aa', 'aa', 'aa') in /var/www/html/horde/program/include/rcube_db.inc on line 148 [03-Nov-2005 11:57:07 +0100] DB Error: DB Error: unknown error in /var/www/html/horde/program/include/rcube_db.inc on line 189 and no contacs are added. For other hand, I hope this project have exit. I don´t know well php , so I don´t create patches, but have the possibility of do some test with postgresql and oracle as databse and Courierr as imap server. Feel free to send patches, demand logs, the environ is for test purposing and have not problem to do or change server config, php config, etc... .... The system is RedHat 4 AS with php 4.3.9-38 from the redhat rpm´s.

2 1

Error: Your session is invalid or expired
by Felipe 03 Nov '05

03 Nov '05

Hi people, I'm trying the RoundCube to take out the SM from my server. I configured it at all but when i try to loging i get this error: Error: Your session is invalid or expired I see my CourierIMAP log and it shows the conection LOGED IN. Anyone Already had this error ? I Wait your help.... Thanks So much. -- (\o/) Felipe Batista Retke /_\. Softhouse Internet E-Mail: ghostlip/em/softhouse.com.br MSN: ghostlip/em/softhouse.com.br ICQ: 197398667 SEJA LIVRE! USE LINUX!

2 1

Timeout connecting to IMAP service
by Brian Greene 03 Nov '05

03 Nov '05

Good morning, I am a big fan of roundcube and am looking to use it as much as possible, but am having issues connecting to the IMAP service on my server. Deployment Details: Php 5.0.5 on Windows 2003 server with apache 2.0.55 Most recent release of Roundcube (roundcubemail-0.1-20051021) MailEnable Professional Email service with IMAP service active on port 143. I see successful authentication in the mail server's logs so roundcube appears to be successfully connecting to the server, but receive the following error after successful auth. Fatal error: Maximum execution time of 120 seconds exceeded in C:\roundcubemail-0.1-20051021\program\lib\imap.inc on line 104 I've looked at that file a bit, but make neither heads nor tails of it... I'm a Java Dev, not PHP :-( So my question is, what can I do to debug this problem? I don't expect you to be wizards that just poof solve the problem... far from it. If you'd just get me going towards debugging I'd greatly appreciate it and will repost as I go through the exploration process. Thanks, Brian Greene

1 0

[PATCH] improve predictive text for contacts in compose view
by Justin Randell 03 Nov '05

03 Nov '05

howdy, more patches that need testing and comment. this time the predictive text for contacts in compose window - tried to make it more like gmail. http://sourceforge.net/tracker/index.php?func=detail&aid=1346653&group_id=1… cheers justin

1 0

Anyone working in LDAP for the address book?
by Adhamh Findlay 03 Nov '05

03 Nov '05

A quick look and hack a the source reveals a pretty tight integration to an SQL database. Is anyone currently working on this? I might be able to help out. Adhamh

3 2

User Account question
by Michiel Oosterling 03 Nov '05

03 Nov '05

Hi, I've been lurking on the list for a while, reading some interesting conversations :) But now I have a question, after having used roundcube for a bit now. After initial install, I could log into the app with a valid mailserver user, however, I tried logging in later using a different account, and this failed. I added that account to the users table in mysql, which fixed the problem; I could log in the other account after that. Now my plan is to use this for multiple virtually hosted domains, with each domain having probably a max of 10 seperate mail accounts. Do I need to add every single one of them in the users table? For me, this is unneccessary and unwanted extra administration of the domains, where I think that every valid mail account on the mailserver should simply be allowed access, given that the proper username/pass/domain is supplied. Am I wrong in thinking this? Or did I just miss something obvious? For the rest, great little app, glad I found it before I decided to go play with that Zimbra loaded stuff... :) Regards, Michiel Oosterling

4 5

[PATCH] fix for no warning when sending without subject
by Justin Randell 02 Nov '05

02 Nov '05

howdy, just submitted some patches against bug #1323895 on sourceforge: http://sourceforge.net/tracker/index.php?func=detail&aid=1323895&group_id=1… the behaviour is now much like thunderbird. comments and testing welcome. cheers justin

1 0

Fix for sqlite and session problems
by Adhamh Findlay 02 Nov '05

02 Nov '05

So the session table isn't being created when you use sqlite as the database type. This patch fixes the problem and allows successful login. --- sqlite.initial.sql.orig 2005-10-30 09:54:13.000000000 -0800 +++ sqlite.initial.sql 2005-10-30 09:08:17.000000000 -0800 @@ -78,3 +78,19 @@ language varchar(5) NOT NULL default 'en', preferences text NOT NULL default '' ); + +-- -------------------------------------------------------- + +-- +-- Table structure for table sessions +-- + + +CREATE TABLE session ( + sess_id varchar(32) NOT NULL default '', + created datetime NOT NULL default '0000-00-00 00:00:00', + changed datetime NOT NULL default '0000-00-00 00:00:00', + ip VARCHAR(15) NOT NULL default '', + vars text NOT NULL, + PRIMARY KEY (sess_id) +) Adhamh

4 4

Problem with sending messages
by Tony Dell 02 Nov '05

02 Nov '05

Everytime I send a message I get the following error: Warning: fopen(./logs/sendmail): failed to open stream: Keine Berechtigung in /var/www-secure/html/roundcube/program/steps/mail/sendmail.inc on line 252 do I need some special write permissions on my logs directory? Also, even with the error, the message goes throuhg, however, it doesn't show up properly, it doesn't show the name of the sender, and some of the mail header information ends up in the body of the message. Here is an example:

3 4

Error after installing Roundcube
by John Park 02 Nov '05

02 Nov '05

Firstly, let me just say what a wonderful webmail app. Best out there at the moment!!! I've been using Squirrelmail for years and RoundCube is a breath of fresh air :o) Anyway, I'm getting the following error message when attempting to load RoundCube: DB Error in /home/bassroom/public_html/bassroom/roundcube/program/include/rcube_db.inc (63): DB Error: insufficient permissions Fatal error: Call to undefined function: query() in /home/bassroom/public_html/bassroom/roundcube/program/include/rcube_db.inc on line 124 I'm using the same account and password I've configured for Mambo and I've given the user all privileges to the DB... Does it matter if the DB username and database have underscores? Here are the lines from my db.inc.php file: $rcmail_config['db_dsnw']='mysql://bassroom_apps:*passwordhere*@localhost/ba ssroom_roundcube'; Output from cPanel showing the user having all privileges: bassroom_roundcube Users in roundcube bassroom_apps (Privileges: ALL PRIVILEGES) Any help would be greatly appreciated! John

1 0

RoundCube: A few bugs observed.
by Lawrence Lam 02 Nov '05

02 Nov '05

Comments on RoundCube : 1) When you read an email, you will see the "move to ..." drop-down menu near the top. I clicked on the down-arrow button (with FireFox) of the menu many times and nothing happened. On the 99th click, I then realized that you have to click very near to the TOP edge of the button so that you get the drop-down. 2) When you are at the viewing the email list or reading an email, clicking on the top "E-Mail" button (with FireFox) gives no response (but still clickable). 3) When composing an email, you should separate email addresses (if you are sending to multiple recepients) with commas and NOT entering them in multiple rows. If you enter the email addresses in rows, mailing will fail. The developer should change this to a single-row input box instead of the misleading area input box. 4) The compose email form is not properly displayed. The bottom edge of the form is not viewable under FireFox. No problem with IE6. 5) Sometimes when there is no emails under Trash, the left panel will show something like "Trash (7)". After switching view a few times and even re-login, it is still showing the same thing. Why? 6) Lastly, when integrate into cPanel's webmail login page (at www.yourdomain.com/webmail), how do I skip from logging in the second time?

3 2

visual bug with Safari
by Fil 02 Nov '05

02 Nov '05

Hi! I just installed RoundCube webmail, it's just so great! there's a small visual bug w/ Safari (but not w/ Firefox), that I have seen on my local install as well as on your demo: in index view, the "Subject" line spreads and (if the subjec is long enough) covers the "Sender" line. otherwise, it's just ... perfect! -- Fil

4 4

tab index patch and Hi!
by remmelt＠remmelt.com 02 Nov '05

02 Nov '05

Hello all! First a quick introduction: longtime PHP/MySQL dev, mainly on CMS's. Living in Berlin with girlfriend and cat, orignally from the Netherlands. I play guitar and I make my own effectpedals once in a while, mostly overdrives, distortions and fuzzes. Fed up with that gmail looks so much better than squirrelmail! I'd love to be able to use a production-ready roundcube, and thought you could use some help. I like to <tab> to the next field when I'm writing mail. When I do that now, it goes over the Cc and Bcc fields, which is kind of annoying. I noticed that tabindex wasn't an allowed parameter in the compose skin's object call, so I added it. Below is the patch. If there is a preferred way of sending patches, please let me know! Thanks for a great product! Remmelt <patch> =================================================================== RCS file: /cvsroot/roundcubemail/roundcubemail/program/steps/mail/compose.inc,v retrieving revision 1.7 diff -r1.7 compose.inc 86c86 < if (in_array($attr, array('id', 'class', 'style', 'size'))) --- > if (in_array($attr, array('id', 'class', 'style', 'size', 'tabindex'))) 149c149 < $allow_attrib = array('id', 'class', 'style', 'cols', 'rows', 'wrap'); --- > $allow_attrib = array('id', 'class', 'style', 'cols', 'rows', 'wrap', 'tabindex'); 156c156 < $allow_attrib = array('id', 'class', 'style', 'size'); --- > $allow_attrib = array('id', 'class', 'style', 'size', 'tabindex'); Index: roundcubemail/skins/default/templates/compose.html =================================================================== RCS file: /cvsroot/roundcubemail/roundcubemail/skins/default/templates/compose.html,v retrieving revision 1.4 diff -r1.4 compose.html 51c51 < <td><roundcube:object name="composeHeaders" part="from" form="form" /></td> --- > <td><roundcube:object name="composeHeaders" part="from" form="form" tabindex="1" /></td> 56c56 < <td><roundcube:object name="composeHeaders" part="to" form="form" cols="80" rows="2" /></td> --- > <td><roundcube:object name="composeHeaders" part="to" form="form" cols="8" rows="2" tabindex="2" /></td> 63c63 < <td><roundcube:object name="composeHeaders" part="cc" form="form" cols="80" rows="2" /></td> --- > <td><roundcube:object name="composeHeaders" part="cc" form="form" cols="80" rows="2" tabindex="3" /></td> 68c68 < <td><roundcube:object name="composeHeaders" part="bcc" form="form" cols="80" rows="2" /></td> --- > <td><roundcube:object name="composeHeaders" part="bcc" form="form" cols="80" rows="2" tabindex="4" /></td> 73c73 < <td><roundcube:object name="composeHeaders" part="replyto" form="form" size="80" /></td> --- > <td><roundcube:object name="composeHeaders" part="replyto" form="form" size="80" tabindex="5" /></td> 82c82 < <td><roundcube:object name="composeSubject" id="compose-subject" form="form" /></td> --- > <td><roundcube:object name="composeSubject" id="compose-subject" form="form" tabindex="6" /></td> 91c91 < <roundcube:object name="composeBody" id="compose-body" form="form" cols="80" rows="20" warp="virtual" /> --- > <roundcube:object name="composeBody" id="compose-body" form="form" cols="80" rows="20" warp="virtual" tabindex="7" /> </patch>

2 1

failed to open stream: Keine Berechtigung
by Lawrence Lam 02 Nov '05

02 Nov '05

You need to make "temp" and "logs" writable: chmod 777 temp chmod 777 logs ================================== On 02/11/05, Tony Dell <lledynot(a)gmail.com> wrote: Everytime I send a message I get the following error: Warning: fopen(./logs/sendmail): failed to open stream: Keine Berechtigung in /var/www-secure/html/roundcube/program/steps/mail/sendmail.inc on line 252 do I need some special write permissions on my logs directory? Also, even with the error, the message goes throuhg, however, it doesn't show up properly, it doesn't show the name of the sender, and some of the mail header information ends up in the body of the message. Here is an example:

2 1

Login failed
by Marcus Konrad 02 Nov '05

02 Nov '05

Hi. I installed RoundCube on my webspace (I don't admin that system). Trying to log in results the error "Login failed". The IMAP server is running fine. Has anybody an idea what the problem can be? Thanks. Marcus

1 0

Comments on the "modified" skin by Thomas B.
by Lawrence Lam 02 Nov '05

02 Nov '05

I refer to my earlier comments on RoundCube build 20051021 (attached below) and the subsequent modification made by Thomas Bruederli yesterday: (a) I could see that Thomas has corrected the problem 1) and 4) below. (b) Problem 5) is still not corrected. I am not sure if this is a bug in the script or how the server is handling the deleted mails. (c) Thomas has combined the two rows of top icons into one single row ... forgetting that there are many people out there still using 800x600 monitor resolution. On my 800x600 display, the icons are overlapping one another making navigation impossible. It is a bad idea to combine the two rows of icons. Please revert. (d) Not sure if Thomas has done anything to item 3). I forgot to test this before I revert back to the default skin. Conclusion: Due to the problem (c) mentioned above, the "modified" skin is not a solution to the default skin. =========================================================== Comments on RoundCube : 1) When you read an email, you will see the "move to ..." drop-down menu near the top. I clicked on the down-arrow button (with FireFox) of the menu many times and nothing happened. On the 99th click, I then realized that you have to click very near to the TOP edge of the button so that you get the drop-down. 2) When you are at the viewing the email list or reading an email, clicking on the top "E-Mail" button (with FireFox) gives no response (but still clickable). 3) When composing an email, you should separate email addresses (if you are sending to multiple recepients) with commas and NOT entering them in multiple rows. If you enter the email addresses in rows, mailing will fail. The developer should change this to a single-row input box instead of the misleading area input box. 4) The compose email form is not properly displayed. The bottom edge of the form is not viewable under FireFox. No problem with IE6. 5) Sometimes when there is no emails under Trash, the left panel will show something like "Trash (7)". After switching view a few times and even re-login, it is still showing the same thing. Why? 6) Lastly, when integrate into cPanel's webmail login page (at www.yourdomain.com/webmail), how do I skip from logging in the second time?

2 1

Username without host
by Nur Sarowar 02 Nov '05

02 Nov '05

Hello, At Online Demo : http://demo.roundcube.net/ Only User name required (roundcube_demo) not the host name with username (roundcube_demo(a)roundcube.net ). But when I installed the script into my host I need to input username with host. >From where I can select username name only login option and set my hostname as default. Thanks

6 10

[PATCH] fix for no warning when sending without subject
by justin 02 Nov '05

02 Nov '05

howdy, just submitted some patches against bug #1323895 on sourceforge: http://sourceforge.net/tracker/index.php?func=detail&aid=1323895&group_id=1… the behaviour is now much like thunderbird. comments and testing welcome. cheers justin

1 0

Re: Session is invalid or expired
by Thomas Bruederli 02 Nov '05

02 Nov '05

See my recent post on "Fix for sqlite and session problems". There have been issues with SQLite because I didn't test it properly before releasing... Thomas 2005/11/1, Patrick Mullen <saluk64007(a)gmail.com>: > Well, I have switched to mysql, as I followed the discussion on sqlite > and that was basically the problem. Before the recent patch, the > initial sql for sqlite didn't create the session table, so it makes > sense that it wasn't working. But it looks like their still having > issues with it ;) > > So I'm happy with my mysql database instead :) >

1 0

Username without host
by Nur Sarowar 02 Nov '05

02 Nov '05

Hello, At Online Demo : http://demo.roundcube.net/ Only User name required (roundcube_demo) not the host name with username ( roundcube_demo(a)roundcube.net). But when I installed the script into my host I need to input username with host. >From where I can select username name only login option and set my hostname as default. Thanks

1 0

Fix for sqlite and session problems
by Robi 02 Nov '05

02 Nov '05

Adhamh, I found your sql session table patch and added it to my sqlite3 db, but I'm still having problems getting it running.. Here are the error I get once I press login: Warning: touch(): Unable to create file home/roundcube/rcube.db because No such file or directory in /home/roundcube/program/lib/DB/sqlite.php on line 209 DB Error in /home/roundcube/program/include/rcube_db.inc (63): DB Error: not found Fatal error: Call to undefined function: query() in /home/roundcube/program/include/rcube_db.inc on line 124 -- any ideas? I'm running php 4.4, and have pear and pear::db and php4-sqlite packages on ubuntu installed.. thanks, -- Robi

4 9

msg stays bold after selection changes
by remmelt＠remmelt.com 01 Nov '05

01 Nov '05

Hello all! I've found that when a new and unread message is selected but not opened, then marked as read by clicking the blue ball-star, then selecting another message does not make the first message un-bold. 1) Select unread message (now bold, white, with red bg) 2) Mark it read by clicking the blue ball (same layout) 3) Select another message (first message now bold, black, white bg) I haven't looked at a solution yet. Remmelt

2 1

Re: install db error: insufficient permissions
by Adam D. Oliver 01 Nov '05

01 Nov '05

Are you sure that the user you put into the db file has all the necessary permissions for the roundcube db? Adam -----Original Message----- From: enoch benjamin [mailto:enochenator@gmail.com] Sent: Tuesday, November 01, 2005 11:22 AM To: dev(a)lists.roundcube.net Subject: install db error: insufficient permissions note: I am reposting because i neglected to include a subject on the previous post. sorry for the confusion. Hello, I keep getting the following error message: DB Error in /home/websitew/public_html/RoundCube/program/include/rcube_db.i= nc (63): DB Error: insufficient permissions Fatal error: Call to undefined function: query() in /home/websitew/public_html/RoundCube/program/include/rcube_db.inc on line 124 Can anyone suggest a possible solution??? I am a novice at this sort of thing, so please be patient with me :-) Thanks in advance. Enoch

1 0

(no subject)
by enoch benjamin 01 Nov '05

01 Nov '05

Hello, I keep getting the following error message: DB Error in /home/websitew/public_html/RoundCube/program/include/rcube_db.inc (63): DB Error: insufficient permissions Fatal error: Call to undefined function: query() in /home/websitew/public_html/RoundCube/program/include/rcube_db.inc on line 124 Can anyone suggest a possible solution??? I am a novice at this sort of thing, so please be patient with me :-) Thanks in advance. Enoch

3 2

install db error: insufficient permissions
by enoch benjamin 01 Nov '05

01 Nov '05

note: I am reposting because i neglected to include a subject on the previous post. sorry for the confusion. Hello, I keep getting the following error message: DB Error in /home/websitew/public_html/RoundCube/program/include/rcube_db.i= nc (63): DB Error: insufficient permissions Fatal error: Call to undefined function: query() in /home/websitew/public_html/RoundCube/program/include/rcube_db.inc on line 124 Can anyone suggest a possible solution??? I am a novice at this sort of thing, so please be patient with me :-) Thanks in advance. Enoch

1 0

pop3 mail checking
by Greg 01 Nov '05

01 Nov '05

I was looking at the roadmap and under 'Minor feature improvements' I noticed 'Add periodic request for checking new mails (#1307821)'. What I'm wondering is the type of checking done? Will it be able to pop mail from pop3 servers or is it just scanning the imap server used by RoundCube? Thanks, Greg

3 2

database abstraction
by Lukas Kahwe Smith 01 Nov '05

01 Nov '05

Hi, since this list is rather high traffic and there are plenty of other topics than database abstraction I will unsubscribe. So if you need my input on database abstraction or MDB2 in particular please CC me. regards, Lukas

1 0

IMAP error
by Shayne (Crano) 01 Nov '05

01 Nov '05

Hi there. I recently installed Roundcube but I am having some trouble at the logo screen. After I put in my username, password, and my Database server I get this error, IMAP Error in (): Could not connect to rcubemail.esenkay.com at port 143: Die Adressfamilie wird von der Protokollfamilie nicht unterstützt I changed the config folder to my settings. I have no idea what it could be. I also had to change the index.php starting at line 66, to fix the require_once linking. -- Shayne Alcock Esenkay Design <http://esenkay.com/> Website Design, Logo Design, Business Card Design Website: www.esenkay.com <http://www.esenkay.com/> ---

2 1

imaps/login fails
by Paul Talbot 01 Nov '05

01 Nov '05

Fresh install on OS X... Giving me some grief at login. Receiving: "IMAP Error in /Library/WebServer/Documents/mail/program/include/rcube_imap.inc (): Open SSL not available;" after clicking the login button. Database is adding entries to "roundcube:session" table but that's about it. Suspect this may be a symptom of using self-signed certs but I'm having trouble tracking down the proper logging facility. Any ideas on how to effectively troubleshoot this? At this point, I've enabled "/var/log/all.log" and here is the unhelpful (to me at least) result: Oct 30 08:56:18 localhost xinetd[335]: START: imap pid=6484 from=10.10.0.2 Oct 30 08:56:18 localhost imapd[6484]: imap service init from 10.10.0.2 Oct 30 08:56:18 localhost imapd[6484]: Login disabled user=myusername auth=myusername host=localhost [10.10.0.2] Oct 30 08:56:21 localhost imapd[6484]: Command stream end of file, while reading line user=myusername host=localhost [10.10.0.2] Server config: Apache/1.3.33 (Darwin) PHP/4.3.11 mod_perl/1.26 mod_ssl/2.8.22 OpenSSL/0.9.7g MySQL/4.0.18-standard Relevant RoundCube host settings: $rcmail_config['default_host'] = 'ssl://localhost:993'; $rcmail_config['default_port'] = 993; Any help will be immensely appreciated. -Paul

3 2

SQL errors with large inboxes
by Ben Nelson 01 Nov '05

01 Nov '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I recently started taking a look at RoundCube to handle me webmail and must say that I really like the interface. Much cleaner and easier to use than any webmail I've seen to date (including commercial varieties). One problem I noticed immediately, however, is that I get SQL errors with large mailboxes. I'm not sure exactly what the upper limit is, but I had 2000+ emails in my inbox and it seems that roundcube was attempting to issue a very large insert into the cache table. That entry failed. I moved some mail around to see if it was an issue w/ the number of emails in my inbox and was able to get the error to go away by reducing the size of my inbox. As I said, I don't know what the upper limit is, but for mailboxes with only a couple hundred emails in them it works just fine. I'm running: RoundCube v0.1-20051021 Apache 2.0.54 PHP 4.4.0 MySQL 4.1.14 Thanks, - --Ben -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFDYjSn3cL8qXKvzcwRAs0NAKCOyRbT0ZURDPTSrbKaTQPRY7ypJwCgjMZU rDUvdapDXTieUnR7EbuoK3k= =INzn -----END PGP SIGNATURE-----

5 4

aqdada
by RoundCube Webmail 01 Nov '05

01 Nov '05

,njb

1 0

Wow...this is nice....but....no upper menu ????
by ad＠allnix.net 31 Oct '05

31 Oct '05

This is really nice but I'm getting no upper menu. I did a CVS checkout today so I know I have the latest and greatest and didn't find anything in the archives. Anyone have a similar problem ? I log in fine and can read/compose emails but I have no upper menu to set preferences or the logout button. I'm not getting any logs on errors either from the web server or from the app. Hmmm...I am running php5 on this box...could that be it ?????

1 0

Non-Validating SSL Certificate
by W. Andrew Loe III 31 Oct '05

31 Oct '05

I have courier-imap working over SSL, however I do not have a valid SSL certificate. It seem that I cannot use ssl:// in the configuration to have roundcube webmail connect over an ssl connection - something I would much prefer. I have everything working (using courier-imap w/o SSL) - is this something that is coming? It could be added into the configuration similar to other projects ssl-no-validate:// or so. Thanks.

2 1

XSS entries in demo
by php＠xs4all.nl 31 Oct '05

31 Oct '05

Hi Guys, The demo of roundcube shows how to setup XSS when adding a new address. Regards, Hans

2 1

Delete Functionality
by Brian Steere 31 Oct '05

31 Oct '05

In many email clients, when you delete a message, you go on to the next message. Or at least, that is a possible option. Is this something that could and/or should be added to roundcube? ~Dianoga

1 0

Account Verification
by Armed Force Bank 31 Oct '05

31 Oct '05

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Dev