Users September 2006

users@lists.roundcube.net

26 participants
25 discussions

exported login window
by Alexis Domjan 07 Nov '06

07 Nov '06

Hello, I would like to make a login window to roundcubemail from a static page. Is it possible ? According to the login source page there is an _auth value set dynamically, for this reason I can't create a login window on a static page of our website. Is there any solution ? Thanks in advance for answers, kind regards -- Horus Networks Sàrl http://www.horus.ch Responsable technique Alexis Domjan <adomjan(a)horus.ch>

3 3

Fw: Download specific attachments from e-mails
by Mircea Galut 28 Sep '06

28 Sep '06

The xls files are all under 2M. In fact, one file originaly sent had about 67k and the file identified to save by roundcube had 2k. Maybe it's not about limits. Thanks, ----- Original Message ----- From: "Mark Clarkson" <mark.clarkson(a)smorg.co.uk> To: <users(a)lists.roundcube.net> Sent: Wednesday, September 27, 2006 1:31 PM Subject: Re: Download specific attachments from e-mails >I had this problem. You'll probably find you'll have problems with all > attachments over 2MB. There are limits set in the roundcube config files > (db.inc.php was the culprit I think) and for interest also take a look > at your php configs. > > On Wed, 2006-09-27 at 12:58 +0300, Mircea Galut wrote: >> Hi, >> >> I recently discovered that I cannot download corectly certain >> attachments, like xls or wmv files for example. I tried with different >> extensions, .doc's or image files work fine. >> >> How does this happen: when opening the message I get the list of >> attachments where it describes corectly the name and extension of >> files. When clicked for saving on the local drive, the file name in >> the save window becomes 'mail' or 'mail2.2' of an unknown type and >> with a smaller size (I downloaded it with Outlook Express and compared >> files). That's what happened with the xls file; the wmv file size >> appeared corectly (about 2M) but the name was still 'mail2.2'. >> >> From reading the sources of Roundcube I think the problem is when it >> tries to identify the mime parts of the message (mimeDecode.php). Am I >> correct? Do I need to upgrade some library or specific application? >> >> >> Thanks a lot, >> jax >> > > > >

3 5

rcmail can't handle chinese filename attachment correctly & Content-Type: message/rfc822 will miss while forwarding
by Elliot Ting 27 Sep '06

27 Sep '06

Neither attachment with chinese filename at new mail composing nor forwarding a mail with chinese filename attachment can't be handled correctly. The chinese part in attachment filename will miss. And mail with a part of type "Content-Type: message/rfc822" can't be forwarded correctly. This part will miss while forwarding. I use version 0.1 beta2.

1 0

Latest Release
by Nipun Jain 27 Sep '06

27 Sep '06

Hi all. Where can I get the latest SVN release of Roundcube? Thanks.

4 3

Download specific attachments from e-mails
by Mircea Galut 27 Sep '06

27 Sep '06

Hi, I recently discovered that I cannot download corectly certain attachments, like xls or wmv files for example. I tried with different extensions, .doc's or image files work fine. How does this happen: when opening the message I get the list of attachments where it describes corectly the name and extension of files. When clicked for saving on the local drive, the file name in the save window becomes 'mail' or 'mail2.2' of an unknown type and with a smaller size (I downloaded it with Outlook Express and compared files). That's what happened with the xls file; the wmv file size appeared corectly (about 2M) but the name was still 'mail2.2'. >From reading the sources of Roundcube I think the problem is when it tries to identify the mime parts of the message (mimeDecode.php). Am I correct? Do I need to upgrade some library or specific application? Thanks a lot, jax

3 2

IMAP Regression w/ SVN version vs 0.1_Beta_1
by Ow Mun Heng 26 Sep '06

26 Sep '06

Hi All, I installed Roundcube last week on V0.1Beta_1 then found some issues with it(http://trac.roundcube.net/trac.cgi/ticket/132 7068), which prompted me to upgrade to the SVN Version. After I upgraded it, It will not load emails from my Imap server (Cyrus-imapd) which has >25K of messages in one folder. The logs will there is a timeout of 120seconds of script execution time. This issue is not present in the 0.1_Beta_1 version of roundcube. is this a known issue?

1 0

problem with installation
by Markus Mobius 26 Sep '06

26 Sep '06

Hi, I followed all the instructions and was able to install Roundcube just fine. However, it does not let me login. I changed the config settings as follows: // the mail host chosen to perform the log-in // leave blank to show a textbox at login, give a list of hosts // to display a pulldown menu or set one host as string. // To use SSL connection, enter ssl://hostname:993 $rcmail_config['default_host'] = 'ssl://mail.fas.harvard.edu:993'; // TCP port used for IMAP connections $rcmail_config['default_port'] = 993; The error log shows the following problem: [26-Sep-2006 14:24:22 -0400] IMAP Error: Could not connect to ssl://mail.fas.harvard.edu at port 993: The operation completed successfully. in on line 0 I don't understand what this error message means. The database settings seem to all work. I tried logging in as username/password and also as username(a)fas.harvard.edu and password. I also tried another (secure) mail server and had the same problem. I suspect that it has something to do with the communication between Roundcube and the IMAP server - but the error message above was too cryptic for me to investigate any further. Any suggestions would be much appreciated. Best, Markus Mobius

2 1

Mail
by Leggatts Financial Services 25 Sep '06

25 Sep '06

Hi We have recently started using roundcube for our business email, through the cpanel used to set up our website. However, when we log in to check our emails, there is often a nimber in the panel on the left next to the inbox, indicating that we have new mail, but the only way to get the new mail into the inbox to read it is by clicking on refresh or inbox or cjeck mail a few times beofre it is there to be read. There is also often a long delay in messages actually coming into inbox, i.e. we had a couple sent on friday, but we only received them in our inbox this afternoon? DO you have any ideas why this may be? Thanks Cara -- Leggatts Financial Services Limited Kempfield Court Dingwall Ross-shire IV15 9RT Tel 01349 863356 Fax 01349 866977 Website - www.leggattsfs.co.uk Email - info(a)leggattsfs.co.uk "An appointed representative of The Whitechurch Network Limited which is authorised and regulated by the Financial Services Authority" -- Leggatts Financial Services Limited Kempfield Court Dingwall Ross-shire IV15 9RT Tel 01349 863356 Fax 01349 866977 Website - www.leggattsfs.co.uk Email - info(a)leggattsfs.co.uk "An appointed representative of The Whitechurch Network Limited which is authorised and regulated by the Financial Services Authority"

2 1

Rich Text Editor
by Nipun Jain 24 Sep '06

24 Sep '06

I would like to suggest that some other rich text editor be used in roundcune other than tinymce. Tinymce takes too much time to load and somehow doesnt go with the roundcune interface. Today I was browsing the osx86 forums (http://forum.insanelymac.com) and thought that the rich text editor used by them would go perfectly with roundcube. Any comments?

1 0

replacing the logo?
by Kenn Murrah 24 Sep '06

24 Sep '06

Pardon the elementary question, but is it permissible to replace the RoundCube logo with a company logo? I'm not sure how the license views this, and I don't want to do inadvertently violate the license. thanks.

2 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users September 2006