Users May 2007

users@lists.roundcube.net

40 participants
39 discussions

Upload attachment not working
by Spil Oss 02 Jul '07

02 Jul '07

Hi all, When composing a message, I cannot add an attachment (tried both FF2 and IE6). After clicking the upload button, I get "File upload failed" FreeBSD 6.2 Apache 2.2.4 (from ports) PHP 5.2.1_3 (from ports) suhosin 0.9.6.2 eaccelerator (from ports) v0.9.5 roundcube-0.1.20070303 (from ports) Checked an earlier build and that behaved the same. I have an open_basedir restriction set to the installation path of roundcube (/usr/local/www/roundcube) It seems that roundcube tries to store the file in /usr/local/www/roundcube/temp which is allowed under the open_basedir Switching eaccelerator off doesn't help. No entries in apache error log for the failure, nor anything to be found in roundcube's logs. (even if setting debug to level 8) Any clues, pointers, help appreciated greatly! Kind regards, Spil.

2 4

Unable to log into latest stable release
by Michiel Oosterling 05 Jun '07

05 Jun '07

Hi there, I've used Roundcube for quite some time, and decided to upgrade to latest stable release. Everything worked fine, and on the side, it's a nice improvement over the last version I was running. Now, for some obscure reason, I'm all of a sudden unable to log in. I have not changed any settings. Looking through the roundcube logs, I don't see anything indicating I even tried to log in, same goes for the mail.log. Anyone have this same problem, or anyone know where I should be looking for answers? All help appreciated. regards, Michiel Oosterling NewformsMedia

4 4

Blank page after login
by Pedro Almeida 01 Jun '07

01 Jun '07

I'm trying to configure roundcube under FreeBSD, using postfix + mysql+ postfixadmin+dovecot(ssl) as imap server. After login on roundcube I got a blank page. What might be happening? Relevant lines I have changed on my config file: //mailserver running ssl $rcmail_config['default_host'] = 'ssl://10.0.0.54:993'; //default, because I think that's not relevant to server connection $rcmail_config['username_domain'] = ''; All my domains are considered as being virtual by postfix. So, perhaps I have to configure "virtual_query" under main.inc.php.? But what should be the correct syntax? What I have to change in this example? $rcmail_config['virtuser_query'] = "SELECT email_address FROM database.table WHERE login = '%u'"; I'm using: php5-5.2.1_3 PHP Scripting Language (Apache Module and CLI) php5-iconv-5.2.1_3 The iconv shared extension for php php5-mbstring-5.2.1_3 The mbstring shared extension for php php5-mysql-5.2.1_3 The mysql shared extension for php php5-openssl-5.2.1_3 The openssl shared extension for php php5-pcre-5.2.1_5 The pcre shared extension for php php5-session-5.2.1_3 The session shared extension for php php5-sockets-5.2.1_3 The sockets shared extension for php apache-1.3.37_3 mysql-server-5.0.37 Thanks a lot

3 3

use roundcube from windows mobile
by Farkas Levente 31 May '07

31 May '07

hi, is it possible to use roundcube from windows mobile? i can't use it since i can't double click on my wm5's ie. so how can i read any kind of mails? thanks in advance. yours. -- Levente "Si vis pacem para bellum!"

4 4

Ldap Addressbook
by Hager Renaud 31 May '07

31 May '07

Hi, I tryed to use the LDAP addressbook, I confgure main.inc.php : $rcmail_config['ldap_public']['Laboratoire'] = array( 'name' => 'Laboratoire', 'hosts' => array('myhostname'), 'port' => 389, 'base_dn' => 'ou=Users,dc=mydomain', 'bind_dn' => '', 'bind_pass' => '', 'search_fields' => array('mail', 'cn','gecos','mailALternateAddress'), // fields to search in 'name_field' => 'cn', // this field represents the contact's name 'email_field' => 'mail', // this field represents the contact's e-mail 'scope' => 'sub', // search mode: sub|base|list #'filter' => '(accountStatus=active)', // will be &'d with search field ex: (status=act) 'fuzzy_search' => 'true'); // server allows wildcard search When I want to display the list of email which are in the LDAP's addressbook the page is empty but when I search someone I get a result. Do you have suggestions ? Sincerely -- ____________________________ Renaud Hager - Administrateur Systèmes et Réseaux CNRS - UMR 8504 Géographie-cités 13, rue du Four F-75006 PARIS Tel. 33 (0)1 40 46 40 02 - Fax 33 (0)1 40 46 40 09 E-mail: rhager(a)parisgeo.cnrs.fr

2 2

Roundcube & HELO command error 504
by Renaud Hager 28 May '07

28 May '07

Hi, I installed roundcube version rc1. After having configured main.inc.php and db.inc.php, I was unable to send any emails. I had a problem with the postfix server, the error was : 504 5.5.2 <localhost: Helo command rejected: need fully-qualified hostname. In order to solve this problem I modified the file program/include/rcube_smtp.inc. I replaced the line 75 ( $helo_host = !empty($_SERVER['server_name']) ? $_SERVER['server_name'] : 'localhost';) with this : if ( !empty($CONFIG['helo_host']) ) { $helo_host = $CONFIG['helo_host']; } elseif ( !empty($_SERVER['server_name']) ){ $helo_host = $_SERVER['server_name']; } else { $helo_host = 'localhost'; } Then in main.inc.php I added the line : $rcmail_config['helo_host']= 'myhostname'; It finally worked for me! ;) Hope this helps -- ________________________________________________ Renaud Hager Administrateur Système et Réseaux UMR 8504 13 rue du four 75006 Paris

2 2

P_connect vs mysql_connect
by Joe Rosa 28 May '07

28 May '07

My host doesn't allow a p_connection (mysql:// roundcube:pass@localhost/roundcubemail) to the MySQL database for security reasons , they suggested to use a mysql_connect to make the connector. Someone knows if is it possible to do that ?? And how ?? Thanks Joe Rosa joeszepe(a)yahoo.co.uk ___________________________________________________________ What kind of emailer are you? Find out today - get a free analysis of your email personality. Take the quiz at the Yahoo! Mail Championship. http://uk.rd.yahoo.com/evt=44106/*http://mail.yahoo.net/uk

3 2

Multiple Messages selection. FireFox Pb
by Riahi Taieb 26 May '07

26 May '07

Hi, I'm using the SVN version, and getting a pb with the firefox (1.5-2.x) browser when I try to select more than a message. If I use the shift key and select messages, they are opend on a new firefox window, using the control key they are tabed. Undecided No problem using Internet explorer (6.x and 7 ) and safari. Any one can help ?? Riahi Taieb

2 1

Re: PHP Fatal error with attachment
by Brian Jackson 26 May '07

26 May '07

I'm not a roundcube dev, so take this with a grain of salt, but I'd guess that roundcube just uses more memory. It uses different imap access libraries, it maintains a lot more state (to give it that nice desktop client feel), it may very well use a different method to send mail too (this I'm not sure of). At the very least, it's going to need 1.5 X attachment size (for mime'ing the attachment, probably more) + whatever it's normal running size is. --Brian Jackson p.s. you replied to me not the list On May 25, 2007, at 5:33 PM, Lewis Butler wrote: > On 25-May-2007, at 07:20, Brian Jackson wrote: >> Looks like something else is already using ~10MB of memory, so >> when roundcube tries to get 6 more for the attachment, it fails. >> At least that would be my guess. How much memory are the apache/ >> php processes using at idle? > > Just out of curiosity, why is this so much more an issue with > Rouncube than Squirrelmail? If an attachment fails in RC I can > always seem to send it via squirrelmail. > > > -- > Lewis Butler, Owner Covisp.net > 240 S Broadway #203, 80209 > mobile: 303.564.2512 fx: 303.282.1515 > AIM/ichat: covisp xdi: http://public.xdi.org/=lewisbutler > >

1 0

IMAP mail folder prefix
by Pasi Koivisto 26 May '07

26 May '07

Hi all! I just installed the latest beta and seem to have a problem with my IMAP server, worked fine before I upgaded. I have custom names for Drafts (Utkast), Sent (Skickat) and Deleted (Borttaget) folders and have configured my main.inc.php for that. Now when I log in I get folders (that are emtpy) but the names seem to suggest that it's partial names from my custom named folders. Also when I go to check folders I get all of my folders and not the IMAP ones, I am using a folder prefix that's "mail/" same as I use in Apples Mail.app client.

3 2

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users May 2007