Users

users@lists.roundcube.net

1 participants
2946 discussions

trouble with main mail view on squeeze
by florian 28 Jul '14

28 Jul '14

Hi There! I have two roundcube 1.0.2 installations on seperate good old squeeze servers. I upgraded them occasionally. With one server I had little trouble updating to 1.0.1 cause I have a weired "mbstring.func_overload = 7" for a different web-app and bin/installto.sh complained about it. Anyhow the installation using 1.0.0 worked fine. After the release of roundcube 1.0.2 I found time to work out the mbstring thing and updated roundcube. Unfortunately the "mail-view" was broken afterwards: - at first the mailfolder list pops up for half a second and then disappears - the header bars are there and work fine - the window is very broad and mostly white with a grey roundcube logo in the middle - there are two sliders [grey doubble lines] (one in cernter left which can be moved left and right, one in the upper middle which is not realy "working" after moving it little up) - addressbook and settings work as expected I deleted the installation and installed from scratch, but without any progress :( I tested with four browsers on two systems: all the same one roundcube was working the other didn't. So I started to search for an error by comparing the two installations. I think didn't find any relevant difference in delivered html, php settings or third party software. Almost all the same. Any idea? css? javascript? How can I debug this? Thanks for your help

1 0

Display oddity with imported address book entries.
by Michael D. Sofka 24 Jul '14

24 Jul '14

We are preparing to move from our legacy webmail to RoundCube. Our servers are running 0.9.5, on Ubuntu 14.04. I have found an oddity when importing address book entries: Our old system can export contacts as Outlook 2000 CSV files. When the CSV is imported to "Personal Addresses" the entries show up, but only the Name is displayed. Clicking on "Edit Contact" shows blank entries. Personal Addresses added via the "Address Book" page display all fields correctly. Both kinds of address book entries---imported, and hand entered---are searched when composing messages, and both work, as in the email address is found, and used in the To:, CC:, etc. fields. Stranger still, when I export these entries the VCARD values are correct, and consistent with the VCARD entries for the hand-entered contacts. Finally, and strangest, when I delete the entries, and re-import them from the RoundCube VCARD file the originally imported contacts still do not display correctly, while the deleted, and imported hand-entered contacts do display correctly. I have tried this several times. I also can see no difference in the DB entries for the Contacts, no hidden characters, vertical tabs, nothing out of the ordinary, or different, in the two types of entries. Ideas? -- Michael D. Sofka sofkam(a)rpi.edu C&MT Sr. Systems Programmer, Email, TeX, Epistemology Rensselaer Polytechnic Institute, Troy, NY. http://www.rpi.edu/~sofkam/

2 2

Re: [RCU] users Digest, Vol 85, Issue 8
by Stuart Naylor 12 Jul '14

12 Jul '14

Apols ignore me as managed it in end. $rcmail_config['ldap_public'] = array( 'MyAdLdap' => array ( 'name' => 'Zentyal.lan Contacts', 'hosts' => array ( 0 => 'localhost', ), 'sizelimit' => 6000, 'port' => 3268, 'use_tls' => false, 'user_specific' => false, 'base_dn' => 'DC=office,DC=zentyal,DC=lan', 'bind_dn' => 'CN=Administrator,CN=Users,DC=office,DC=zentyal,DC=lan', 'bind_pass' => 'zent1', 'writable' => false, 'ldap_version' => 3, 'search_fields' => array ( 0 => 'mail', 1 => 'cn', ), 'name_field' => 'cn', 'email_field' => 'mail', 'surname_field' => 'sn', 'firstname_field' => 'givenName', 'sort' => 'sn', 'scope' => 'sub', 'filter' => '(&(mail=*)(|(&(objectClass=user)(!(objectClass=computer)))(objectClass=group)))', 'global_search' => true, 'fuzzy_search' => true ), ); If you want a base DN such as DC=office,DC=zentyal,DC=lan which might bring in OU's and Users the cope needs to be subtree but also only the global catalog works. So it was a combination of scope, base_dn and port and some dumb stuff by myself. Even though writable=false it is still possible to click + and get the form to add a contact. Stuart -----Original message----- > From:users-request@lists.roundcube.net <users-request(a)lists.roundcube.net> > Sent: Saturday 12th July 2014 11:00 > To: users(a)lists.roundcube.net > Subject: users Digest, Vol 85, Issue 8 > > Send users mailing list submissions to > users(a)lists.roundcube.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.roundcube.net/mailman/listinfo/users > or, via email, send a message with subject or body 'help' to > users-request(a)lists.roundcube.net > > You can reach the person managing the list at > users-owner(a)lists.roundcube.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of users digest..." > > > Today's Topics: > > 1. Samba4 AD LDAP Address Book (Stuart Naylor) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 12 Jul 2014 09:46:27 +0100 > From: Stuart Naylor <stuartiannaylor(a)thursbygarden.org> > To: users(a)lists.roundcube.net <users(a)lists.roundcube.net> > Subject: [RCU] Samba4 AD LDAP Address Book > Message-ID: > <zarafa.53c0f5e3.7b25.760fd1c64f52a46a(a)zent1.thursbygarden.lan> > Content-Type: text/plain; charset=utf-8 > > Hi been trying to configure a read only address book from my samba4 install > > I read the http://trac.roundcube.net/wiki/Howto_Config/Ldap > > So its local host or zent1.office.zentyal.lan as its just a vm > > the error log was telling me that there was no php-ldap so I enabled ldap php mod > > Then struggled as still nothing but no error. > > Anybody any tricks or tips for LDAP Address Book > > > > ------------------------------ > > _______________________________________________ > List info: http://lists.roundcube.net/users/ > > > End of users Digest, Vol 85, Issue 8 > ************************************ >

1 0

Samba4 AD LDAP Address Book
by Stuart Naylor 12 Jul '14

12 Jul '14

Hi been trying to configure a read only address book from my samba4 install I read the http://trac.roundcube.net/wiki/Howto_Config/Ldap So its local host or zent1.office.zentyal.lan as its just a vm the error log was telling me that there was no php-ldap so I enabled ldap php mod Then struggled as still nothing but no error. Anybody any tricks or tips for LDAP Address Book

1 0

R: Re: R: Re: Trouble in moving messages in folder
by absolutely_free＠libero.it 10 Jul '14

10 Jul '14

It was a problem with my custom skin. With default skin, moving messages works fine. Thankyou >----Messaggio originale---- >Da: mett(a)pmars.jp >Data: 08/07/2014 4.27 >A: <users(a)lists.roundcube.net> >Cc: "absolutely_free(a)libero.it"<absolutely_free(a)libero.it> >Ogg: Re: [RCU] R: Re: Trouble in moving messages in folder > >On Mon, 7 Jul 2014 14:15:52 +0200 (CEST) >"absolutely_free(a)libero.it" <absolutely_free(a)libero.it> wrote: > >> Hi Mett, >> >> which permission? I'm using "virtual" user (on mysql backend). >> On MTA side, all users folder have postfix:postfix permission. >> Thank you again >> >> >> >> >> ----Messaggio originale---- >> >> Da: mett(a)pmars.jp >> >> Data: 04/07/2014 17.46 >> >> A: "absolutely_free(a)libero.it"<absolutely_free(a)libero.it>, "Roundcube >> Users mailing list"<users(a)lists.roundcube.net> >> >> Ogg: Re: [RCU] Trouble in moving messages in folder >> >> >> >> might be permissions problems. >> >> like, you re running on the server as an allowed user and they are >> not(permission wise, not credential wise). >> >> hth >> >> > >Hi, > >1/You might try to access your roundcube server from the outside(I >mean not the server roundcube is running on and not your local network), >and see if you get the same problem than your users or not. >--> If not, then it is a problem particular to your user's set up and >not the server. > >2/You said you're using virtual user with mysql. So, it seems it is not >a roundcube issue but more an MTA/MDA one. > >A good tutorial can be found at the following link: >https://workaround.org/ispmail/squeeze/setting-up-dovecot > >hth > > >

1 0

Strange behavior while sending mails
by Felix Rubio Dalmau 10 Jul '14

10 Jul '14

Hi everybody, I have configured roundcube to access my mail server through the submission port. I have enabled also the smtp debugging and I get the proper log if I send a mail using roundcube. In the log, I get these last messages telling everything is ok: [10-Jul-2014 22:32:26 +0200]: <k2d6nftq> Recv: 250 2.0.0 Ok: queued as 3C1A7E02DB [10-Jul-2014 22:32:26 +0200]: <k2d6nftq> Send: QUIT [10-Jul-2014 22:32:26 +0200]: <k2d6nftq> Recv: 221 2.0.0 Bye However, in the web interface, since I press the button "send" that appears a toast message saying "Sending mail..." and never stops until it is replaced by another which reads "Timed out". So it is like there is some problem by properly processing the output from my smtp server in the roundcube side. Does anybody know how to solve this issue? Thank you very much in advance, Felix

2 1

R: Re: Trouble in moving messages in folder
by absolutely_free＠libero.it 07 Jul '14

07 Jul '14

Hi Mett, which permission? I'm using "virtual" user (on mysql backend). On MTA side, all users folder have postfix:postfix permission. Thank you again ----Messaggio originale---- Da: mett(a)pmars.jp Data: 04/07/2014 17.46 A: "absolutely_free(a)libero.it"<absolutely_free(a)libero.it>, "Roundcube Users mailing list"<users(a)lists.roundcube.net> Ogg: Re: [RCU] Trouble in moving messages in folder might be permissions problems. like, you re running on the server as an allowed user and they are not(permission wise, not credential wise). hth

2 1

Plugin - Viewer
by Marcus Malcom 06 Jul '14

06 Jul '14

Hi all, I'm writing a plugin that uses the message_part_get hook. The basics of what I'm doing is based on certain mimetypes, I want to have a special viewer for certain attachments. Based on the attachment, I write some info to the Roundcube temp directory. When I try to display that in a viewer tab via this method: if (!$args['download'] && $args['mimetype'] && empty($_GET['_load']) && in_array($args['mimetype'], $this->xdm_mimetypes)) { header('Location: ' . $this->abs_url($pathtomytemphtml)); $args['abort'] = true; } I'm getting Forbidden - You don't have permission to access /mail/temp/somedir/index.html on this server. Note: if I do this same thing and put the location to a dummy index.html that is under my plugin directory: .../plugins/myplugin/index.html Roundcube displays the content inlined. For privacy, I can't put the files in the "myplugin" directory. How can I get this inlined correctly using this method? Any help is appreciated. Thank you, -- Marcus Malcom Mirth Corporation Senior Software Engineer -- CONFIDENTIALITY NOTICE: The information contained in this electronic transmission may be confidential. If you are not an intended recipient, be aware that any disclosure, copying, distribution or use of the information contained in this transmission is prohibited and may be unlawful. If you have received this transmission in error, please notify us by email reply and then erase it from your computer system.

2 1

Trouble in moving messages in folder
by absolutely_free＠libero.it 04 Jul '14

04 Jul '14

Hi, some users complain about problems in moving messages in subfolders. They get "forbidden error", even with different browsers. Oddly, if I access with their credentials, I have no problem in moving message. How can I further investigate this? RC version is 1.0.1 Thank you

2 1

Re: [RCU] users Digest, Vol 85, Issue 1
by Ricardo Adolfo Sánchez Arboleda 01 Jul '14

01 Jul '14

These are the files defaults.inc.php / / IMAP [...] $ config ['default_host'] = 'example.com'; / / TCP port connections used for IMAP $ config ['default_port'] = 143; / / SMTP [...] $ config ['smtp_server'] =''; / / SMTP port (default is 25; $ config ['smtp_port'] = 25; config.inc.php / / IMAP $ config ['default_host'] =''; / / SMTP [...] $ config ['smtp_server'] =''; / / SMTP port (default is 25; $ config ['smtp_port'] = 25; Now where editing username: password. to enter roundcube. Thank you! *Saludes;* rasa. 2014-07-01 5:00 GMT-05:00 <users-request(a)lists.roundcube.net>: > Send users mailing list submissions to > users(a)lists.roundcube.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.roundcube.net/mailman/listinfo/users > or, via email, send a message with subject or body 'help' to > users-request(a)lists.roundcube.net > > You can reach the person managing the list at > users-owner(a)lists.roundcube.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of users digest..." > > > Today's Topics: > > 1. with my domain name (Ricardo Adolfo S?nchez Arboleda) > 2. Re: with my domain name (Mike Burger) > 3. Re: with my domain name (Arne Berglund) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 30 Jun 2014 13:41:55 -0500 > From: Ricardo Adolfo S?nchez Arboleda <rasa996412(a)gmail.com> > To: users(a)lists.roundcube.net > Subject: [RCU] with my domain name > Message-ID: > <CAE=ryQ_UTfhFh3B4rA8DWEyBZwPecvoKVaZCV1ToNxR9NZmcyA(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > List where and how to edit roundcubemail-1.0.1 to send and receive > with my domain name. > Example: examplo(a)example.com > IMAP: > SMTP: > I can only do this with gmail > Thank you! > > > *Saludes;* > > rasa. > > > ------------------------------ > > Message: 2 > Date: Mon, 30 Jun 2014 14:47:06 -0400 > From: Mike Burger <mburger(a)bubbanfriends.org> > To: Roundcube Users mailing list <users(a)lists.roundcube.net> > Subject: Re: [RCU] with my domain name > Message-ID: <399747001556a9f548af462c0736f23b(a)bubbanfriends.org> > Content-Type: text/plain; charset=UTF-8; format=flowed > > On 2014-06-30 2:41 pm, Ricardo Adolfo S?nchez Arboleda wrote: >> List where and how to edit roundcubemail-1.0.1 to send and receive >> with my domain name. >> Example: examplo(a)example.com >> IMAP: >> SMTP: >> I can only do this with gmail >> Thank you! > > <roundcube install dir>/config/defaults.inc.php > > $config['default_host']=example.com > -- > Mike Burger > http://www.bubbanfriends.org > > "It's always suicide-mission this, save-the-planet that. No one ever > just stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1 > > > > ------------------------------ > > Message: 3 > Date: Mon, 30 Jun 2014 11:53:18 -0700 > From: Arne Berglund <aberglund(a)lesd.k12.or.us> > To: Roundcube Users mailing list <users(a)lists.roundcube.net> > Subject: Re: [RCU] with my domain name > Message-ID: <14df4a59d42c5312e84213852db1ba6c(a)mail.lesd.k12.or.us> > Content-Type: text/plain; charset=UTF-8; format=flowed > > On 2014-06-30 11:47, Mike Burger wrote: >> On 2014-06-30 2:41 pm, Ricardo Adolfo S?nchez Arboleda wrote: >>> List where and how to edit roundcubemail-1.0.1 to send and receive >>> with my domain name. >>> Example: examplo(a)example.com >>> IMAP: >>> SMTP: >>> I can only do this with gmail >>> Thank you! >> >> <roundcube install dir>/config/defaults.inc.php >> >> $config['default_host']=example.com > > It is best to not edit the defaults file. Instead, copy the line that > you need a different value into the config/config.inc.php file and make > the change there. Leave defaults file unchanged. An entry that exists in > config.inc.php will override the default entry. > > In the end, the config.inc.php file should be fairly short, with only > the entries that are changed from default. Makes troubleshooting much > simpler. > > -- > Arne Berglund > System Administrator, Internet Services > Lane Education Service District > Eugene, OR > ____________ > > > > > ------------------------------ > > _______________________________________________ > List info: http://lists.roundcube.net/users/ > > > End of users Digest, Vol 85, Issue 1 > ************************************

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users