- Users - Roundcube mailing lists

Setting up my school's roundcube email on Mail Mac
by clara.champion＠sciencespo-lille.eu 31 Jul '13

31 Jul '13

Hello, I am very new to this. My school, Sciences Po Lille uses Roundcube Webmail for its students. I would like to be able to access my SciencesPo-Lille.eu emails on my Mail Application. I run on the latest version of Mac OS x Mountain Lion. I hope I am contacting the right mailing list. thank you in advance for your help, Clara.

3 2

expand Show More Message Headers by default?
by Florin Andrei 31 Jul '13

31 Jul '13

Using v0.9.2 I've enabled the show_additional_headers plugin, but it's almost useless since I always need to click the little arrow labeled Show More Message Headers. Is there a way to expand Show More Message Headers by default for all messages? I want that thing to be already expanded when I click on a message. I've looked through the config file, I did some google searches, but I couldn't figure out if it's possible at all. Thanks. -- Florin Andrei http://florin.myip.org/

1 0

Newbie Help
by John Linthicum 29 Jul '13

29 Jul '13

Hi everyone, I've just installed RC 0.9.2 via the bitnami RoundCube installer on a Mac OS X Server 10.8.4. Everything appeared to install correctly. When I'm presented with the RC login at http://localhost/roundcube, I'm unable to log in to any of my email accounts hosted on the server. I keep getting login failed on the login screen. I'm a complete RC newbie, and I'm unsure where to go from here. Can someone help? John

1 0

Skin migration
by Bgs 26 Jul '13

26 Jul '13

Hi all, I have an old 0.3.1 instance running, with a fully customized skin. I plan to upgrade to the latest stable RC. Is there a reasonable chance to migrate the custom skin to the new one or it has to be redone from scratch? Thanks Bgs

3 2

Installation 500 Internal Service Error
by Yasin Eroglu 25 Jul '13

25 Jul '13

Hello, Could you please help me with this? Yes I followed all installation steps correctly. Many thanks in advance, Yasin Sent from Windows Mail

1 0

Re: [RCU] Speed-ups for a slow computer?
by Grant 23 Jul '13

23 Jul '13

>>>> Can anything be done to speed up Roundcube on a Celeron 700 with 512MB >>>> RAM (maxed out) running Gentoo Linux? We're using the Chrome browser >>>> and the CPU is 95% idle when no one is logged into X. I'm getting >>>> reports of 30+ seconds to open an email. >>> >>> no - you should be happy that it runs at all on >>> hardware outperfored by years old smartphones >> >> What are the Roundcube recommended minimum specs? > > i don't know > > but a 700 MHz/512 MB machine is far below the minimum > specs of any modern operating system at all - hence > you even get not a Fedora/Ubuntu installer started > full featured on it I don't mean to call you foolish but I think that's a foolish statement. I use Gentoo which is a modern OS and the system in question surpasses the published hardware requirements for Gentoo on x86: http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=2#doc_ch… - Grant

2 1

Re: [RCU] Speed-ups for a slow computer?
by Grant 23 Jul '13

23 Jul '13

>>> but a 700 MHz/512 MB machine is far below the minimum >>> specs of any modern operating system at all - hence >>> you even get not a Fedora/Ubuntu installer started >>> full featured on it >> >> I don't mean to call you foolish but I think that's a foolish >> statement. I use Gentoo which is a modern OS and the system in >> question surpasses the published hardware requirements for Gentoo on >> x86: >> >> http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=2#doc_ch… > > but not for Fedora and other distributions - period > for the live-CD the *minimum* is 512 MB > > well, you can't expect a fast system with *minimum* requirements > it only says "it works somehow" > > and yes i have servers with 512 MB RAM assigned but they do not > run a GUI and this ones have no load I'm going to fix the problem (probably by simply switching browsers) and the system is going to run perfectly well on its current OS. - Grant

1 0

R: Problem showing HTML message
by absolutely_free＠libero.it 23 Jul '13

23 Jul '13

Hi all, I encountered the same proble with a FRESH roundcube installation (0.9.2), with a clean MySQL database. How can I debug this? Thank you! >----Messaggio originale---- >Da: absolutely_free(a)libero.it >Data: 11/07/2013 16.38 >A: <users(a)lists.roundcube.net> >Ogg: [RCU] Problem showing HTML message > >Hi, >I'm using Roundcube 0.9.2 on Debian 6.0.7. >Some users complain about problem reading HTML messages. >I think this is related to recent upgrade (from RCB 0.8.5); anyway I'm sure I >followed correct steps to upgrade webmail. >Users see message body totally white, and if you try to see the original >header, all part of the body is missing. >I've tried to copy a html message to another RC webmail (same version: 0.9.2) >and I can succesfully it correctly. > >I've no error on apache/error.log >Can you help me troubleshooting this? > >Thank you >_______________________________________________ >Roundcube Users mailing list >users(a)lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users >

3 2

Unexpected session timeouts using memcached session store
by David Carter 23 Jul '13

23 Jul '13

We are currently running a pilot Roundcube service and are expecting to go live a a couple of weeks time. Something that my users have picked up on is that idle sessions appear to time out in unpredictable ways despite the keep_alive requests fired off by the Web browser. A bit of digging over the weekend revealed a potential race condition in program/lib/Roundcube/rcube_session.php : mc_write(). (Roundcube 0.9.2). I'm happy to write the following up as a ticket on trac.roundcube.net. I wanted to make sure my analysis and proposed solution was correct first. Given the 10 minute (600 second) default session_lifetime, keep_alive requests are fired off every 300 seconds. However these may not arrive immediately, particularly if the Web browser, network or server is busy. Sessions stored in memcached expire after precisely 600 seconds unless they are refreshed. mc_write() only refreshes session entries if the following is true: ($newvars !== $oldvars || $ts - $this->changed > $this->lifetime / 2) Most of the time with a idle login session: ($this->lifetime / 2) will be 300 ($ts - $this->changed) will be a tiny fraction more than 300. However if I add some logging it becomes clear that ($ts - $this->changed) is occasionally less than 300. I imagine this happens when the previous keep_alive was stuck in transit for a fraction of a second. It is an asynchronous request and the timer for the next keep_alive doesn't wait. The mc_write() refresh on the session data is skipped when this happens. The following keep_alive is scheduled to arrive precisely the same second that the session is due to expire in memcached. If you are unlucky the keep_alive arrives just after the session has been expired, which leads a "Session is invalid or has expired" error page. This is using memcached for session storage: the problem appears to go away if I switch to using a database backend. I believe that this is because session entries stored in memcached expire after precisely 600 seconds. With a database backend sessions are expired by PHP garbage collection later on. This will add a few seconds delay, at least on a inactive system. The attached patch appears to fix the problem, using two separate approaches: 1) A lower threshold for deciding when to refresh the session entry. (I am tempted to remove the guard condition altogether and always update. There isn't any I/O cost associated with a memcached back end). 2) A slightly longer expiry time for entries stored in memcached. However I may be missing some subtlety about the refresh process. -- David Carter Email: David.Carter(a)ucs.cam.ac.uk University Computing Service, Phone: (01223) 334502 New Museums Site, Pembroke Street, Fax: (01223) 334679 Cambridge UK. CB2 3QH. --- program/lib/Roundcube/rcube_session.php-DIST 2013-07-21 12:11:49.000000000 +0100 +++ program/lib/Roundcube/rcube_session.php 2013-07-22 10:00:40.000000000 +0100 @@ -310,9 +310,9 @@ $newvars = $oldvars !== null ? $this->_fixvars($vars, $oldvars) : $vars; - if ($newvars !== $oldvars || $ts - $this->changed > $this->lifetime / 2) { + if ($newvars !== $oldvars || $ts - $this->changed > $this->lifetime / 3) { // DPC return $this->memcache->set($key, serialize(array('changed' => time(), 'ip' => $this->ip, 'vars' => $newvars)), - MEMCACHE_COMPRESSED, $this->lifetime); + MEMCACHE_COMPRESSED, $this->lifetime + 60); // DPC } return true;

2 1

PGP plugin
by Andreas Meyer 21 Jul '13

21 Jul '13

Hello! Is PGP Support availabel for roundcube? Greetings Andreas

1 0

Re: [RCU] Speed-ups for a slow computer?
by Grant 21 Jul '13

21 Jul '13

>> Can anything be done to speed up Roundcube on a Celeron 700 with 512MB >> RAM (maxed out) running Gentoo Linux? We're using the Chrome browser >> and the CPU is 95% idle when no one is logged into X. I'm getting >> reports of 30+ seconds to open an email. > > no - you should be happy that it runs at all on > hardware outperfored by years old smartphones What are the Roundcube recommended minimum specs? - Grant

1 0

Installing Roundcube on A Mac
by Frank Holmes 20 Jul '13

20 Jul '13

Hi Fellow Roundcube users can anyone help with an idiots guide to setting up round cube on my Mac Desktop - I get as far as downloading round cubemail 0.9.2 and then cannot find the install on the download - any help appreciated Regards FCH

1 0

/program/resources/blank.pdf
by Reindl Harald 15 Jul '13

15 Jul '13

/program/resources/blank.pdf this ends on machines with for good reasons no installed PDF plugin and also the firefox-js solution disabled because "okular" is set to open any PDF document outside the browser in missing plugin warnings

4 7

Choice of language on login
by Frantz de Germain 12 Jul '13

12 Jul '13

Hello, I've installed roundcube version 0.7.1-2 on an Ubuntu server 12.04. I've seen on a screen capture that it seems possible to have a drop-down list of languages on the login page, but I didn't find anywhere how to obtain this. Regards. -- Frantz de Germain Département Informatique UFR Sciences / DDN Université d'Angers

2 1

Problem showing HTML message
by absolutely_free＠libero.it 11 Jul '13

11 Jul '13

Hi, I'm using Roundcube 0.9.2 on Debian 6.0.7. Some users complain about problem reading HTML messages. I think this is related to recent upgrade (from RCB 0.8.5); anyway I'm sure I followed correct steps to upgrade webmail. Users see message body totally white, and if you try to see the original header, all part of the body is missing. I've tried to copy a html message to another RC webmail (same version: 0.9.2) and I can succesfully it correctly. I've no error on apache/error.log Can you help me troubleshooting this? Thank you

1 0

DSN (Delivery Status Notification)
by Alessandro De Zorzi 10 Jul '13

10 Jul '13

Hi all, DSN (Delivery Status Notification) feature, seems works fine in RC 0.7.2 but not in 0.7.3, someone can confirm? TIA Alessandro De Zorzi

1 0

autocomplete address from envelope addresses
by Suja Amitabh 09 Jul '13

09 Jul '13

Dear rc users, Is there any plugin that supports auto completion of ids from the envelope addresses (MAIL FROM, RCPT TO) of mails in your mailbox? The contacts which are not there in address book, but if we have received mails from them, can those ids come automatically when I compose mails? Greetings.

3 3

Managesieve Fedora 18 config
by everton rocha 05 Jul '13

05 Jul '13

hello, I use fedora 18 with rcube. I can not filter messages. I put in the plugins rcube Managesieve, but does not work. I do not know if dovecot has something to do with it. Would like help from the community. Can anyone help? regards Everton

11 42

Blank page after Login
by ɹןʇnqן 04 Jul '13

04 Jul '13

Roundcube 0.9.2 installed. Loading up the roundcube page I get a login window. I put in a user name and password and I get a blank screen. On Chrome I get "Server Error" (500). The only error I can find is: [01-Jul-2013 13:50:14 UTC] PHP Fatal error: Call to a member function kill() on a non-object in /usr/local/www/roundcube/program/include/rcmail.php on line 648 PHP 5.4.7 php5-pdo-5.4.7 php5-pdo_mysql-5.4.7 pcre-8.31_1 php5-dom-5.4.7 php5-json-5.4.7 php5-simplexml-5.4.7 php5-xml-5.4.7 php5-xmlreader-5.4.7 php5-xmlwriter-5.4.7 php.ini: error_reporting = E_ALL memory_limit = 128MB ; Maximum amount of memory a script may consume (128MB) file_uploads = On session.auto_start = 0 zend.ze1_compatibility_mode = Off ;mbstring.func_overload = 0 magic_quotes_gpc = Off magic_quotes_runtime = Off (suhosin.session.encrypt is not in my php.ini at all) I also set: php_value error_log /www/roundcube/logs/errors Before I removed the installer directory everything checked out ok, and I was even able to send a test message. -- ɹןʇnqן <mailto:lbutler@covisp.net> 303.219.0564

4 7

A simple Roundcube setup issue
by Robert Richards 04 Jul '13

04 Jul '13

Hi: I have installed Roundcube V.0.9.0 on an OSX Server running OSX 10.8.4. Roundcube is the webmail front-end to Postfix/Dovecot. Everything is working perfectly except for one thing. When an email is received which contains an image file attached, the image is replaced with a pink box in the Roundcube interface. The pink box is a gif file, and seems to be a place holder replacing the original image. This behavior is observed in all browsers: Safari, Chrome, and Firefox running under OSX and also by Internet Explorer running under Windows 8. If I bring up the same email in a regular mailer, like OSX Mail, or Thunderbird, the images display correctly the way they were sent. I have a TZ215 firewall and virus/trojan scanner, as well as additional virus scanning on the server protecting emails/images/attachments, so, having little or no concern for maleware I have set Roundcube's user preferences in Settings ==> Displaying Messages ==> Display Remote Images ==> to Always. That setting should allow Roundcube to properly display whatever image is received, but it doesn't. When I look at the raw email, I see a properly encoded email with mime-encoded attachments. Where in Roundcube's internals can I turn off/change this aberrant behavior? Thanks -- "They who would give up an essential liberty for temporary security, deserve neither liberty or security" - Benjamin Franklin

3 2

Problem with scroll (RC 0.9.2) and Android?
by absolutely_free＠libero.it 03 Jul '13

03 Jul '13

Hi, I just upgraded to 0.9.2 and since then Roundcube users fail to properly use webmail (especially scroll function) with their smartphone. With previous (0.8.5) version I had no problem. Any suggestion? Thank you!

1 0

Square parenthesis in folder names
by Luigi Rosa 03 Jul '13

03 Jul '13

Hi, I have a user with [Square parentesis] in IMAP folder names The IMAP server is the latest Dovecot. With Thunderbird the user is able to see the folders. With Roundcube he does not see the folders in the folder lists or in the folder he can subscribe. Is like the folders do not exist for Roundcube Ciao, luigi -- / +--[Luigi Rosa]-- \ A dyslexic man walks int a bra.

2 2

Auto-reply?
by Ole H.B. Andreesen 03 Jul '13

03 Jul '13

How do I set up an auto-reply - I'm on vacation and want to inform whom to turn to. I can't find out. Anyone? -- OLE H.B. ANDREESEN Journalist, leder af journalistlinjen Askov Højskole Maltvej 1, Askov 6600 Vejen Tlf: +45 51 56 55 54 E-mail: oa(a)askov-hojskole.dk www.askov-hojskole.dk [1] PRIVAT: Sdr. Kongevej 18 6000 Kolding Tlf: +45 75 50 60 20 Mobil: +45 40 36 50 21 E-mail: oleandreesen(a)gmail.com Links: ------ [1] http://www.askov-hojskole.dk

2 2

Special Characters help
by nrbrown＠expatriot.com.au 02 Jul '13

02 Jul '13

In many of my emails I need to use characters which are not on my keyboard such as currency symbols other than $. How do I do this? Nicholas Brown

4 3

Re: [RCU] [RCD] bb5d72: Use also Envelope-To for identity selection (#1488...
by Michael Heydekamp 02 Jul '13

02 Jul '13

Am 02.07.2013 21:02, schrieb Justin van Beusekom: > You can provide an patch: > > https://github.com/roundcube/roundcubemail/pulls Thanks. But if I'm getting right, this is more a patch request rather than a real and direct commit to the source, right? Cheers, -- Michael Heydekamp Co-Admin freexp.de Düsseldorf/Germany

1 0

Displaying folder names in dependence of splitter position
by Michael Heydekamp 02 Jul '13

02 Jul '13

Until a few days/weeks ago, 0.9 stable and 1.0-git behaved different in the following respect: 0.9.x: ------ When moving the vertical splitter to the left, so that the folder names couldn't be fully displayed anymore, the folder names have been shortened such as "debian-sec...announce (524)". 1.0-git: -------- When moving the vertical splitter to the left, so that the folder names couldn't be fully displayed anymore, the folder names have NOT been shortened but e.g. being displayed as "debian-security-anno" (the most right part of the folder name being truncated in the display). Today, both versions (0.9.2 [GIT 20130630.1129] and 1.0-git [GIT 20130701.1430]) behave the same as described under "1.0-git" above (folder name being truncated rather than shortened). Is this deliberate...? Browser: IE8 Cheers, -- Michael Heydekamp Co-Admin freexp.de Düsseldorf/Germany

2 4

Unable to set Sent folder to "INBOX"
by David Carter 02 Jul '13

02 Jul '13

One of my users noticed that while "INBOX" appears in the list of mailboxes listed under: Settings => Preferences => Special Folders => Sent it is not possible to select that folder for sent messages. Any attempt to do do ends up with the empty value "---". A bit of digging uncovered program/steps/settings/func.inc: $select = rcmail_mailbox_select(array( 'noselection' => '---', 'realnames' => true, 'maxlength' => 30, 'folder_filter' => 'mail', 'folder_rights' => 'w', // #1486114, #1488279 'onchange' => "if ($(this).val() == 'INBOX') $(this).val('')", # ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ )); http://trac.roundcube.net/ticket/1486114 explains the problem with Drafts, which make sense. I have pointed the user in question at Settings => Composing Messages => Place replies in the folder of the message being replied to but that isn't quite what they are looking for: they want incoming and outgoing email in a single mailbox (this is a shared account). This is with Roundcube 0.9.2, although I don't think that is particularly significant. The ticket that I refer to above is a few years old now. -- David Carter Email: David.Carter(a)ucs.cam.ac.uk University Computing Service, Phone: (01223) 334502 New Museums Site, Pembroke Street, Fax: (01223) 334679 Cambridge UK. CB2 3QH.

2 1

Installing 0.9.2
by ɹןʇnqן 30 Jun '13

30 Jun '13

After updating to php53 so that the mysql would work, I get the following when trying to goto http://<roundcube>/installer Fatal error: Call to undefined function session_start() in /usr/local/www/roundcube/installer/index.php on line 57 -- ɹןʇnqן <mailto:lbutler@covisp.net> 303.219.0564

2 4

Blank Page on /install/ - Can't Figure It Out
by Schiz0 21 Jun '13

21 Jun '13

Hi list, I'm having a tough time getting roundcube to work. Here's the software I'm using, and the versions: FreeBSD 9.1-RELEASE-p3 nginx/1.4.1 PHP 5.4.16 (php-fpm via fastcgi) (all my extensions are listed below) So here's the problem. All my php scripts work elsewhere. I even created a new index.php inside roundcube's dir with "echo 'hello world';" to confirm php is working - and it is. When I browse to /installer/, I get a blank page. Absolutely nothing in my nginx error log, php-fpm log, or php error log. I even tested the php error log by calling error_log("Testing") manually and checking the file to make sure it logged the test. I'm sorry I don't have more information to provide - that's the whole reason it's bugging me. It's just silently failing. I went through the roundcube requirements list: http://trac.roundcube.net/wiki/Howto_Requirements and made sure my php.ini settings are correct. I also tried copying the default php.ini-production and php.ini-development files over to no avail. It's just....silently failing for no detectable reason on my part. Hopefully someone else has some hints/tips? Thank you! php5-dom-5.4.16 php5-gd-5.4.16 php5-iconv-5.4.16 php5-json-5.4.16 php5-mbstring-5.4.16 php5-mcrypt-5.4.16 php5-openssl-5.4.16 php5-pdo-5.4.16 php5-pdo_pgsql-5.4.16 php5-pgsql-5.4.16 php5-pspell-5.4.16 php5-session-5.4.16 php5-sockets-5.4.16 php5-xml-5.4.16 php5-xmlrpc-5.4.16 php5-zip-5.4.16 php5-extensions-1.7

1 0

PHP 5.3 needed?
by Andreas Meyer 20 Jun '13

20 Jun '13

Hello! Our server runs PHP 5.2.4 so we cannot upgrade rc to 0.9.2, right? Regards Andreas

3 2

Session timeout probs with IE10
by Oliver Welter 20 Jun '13

20 Jun '13

Hi All, I am running roundcube on top of a LAMP install, I updated to latest 0.9 release yesterday but the problem still exists. Issue: The roundcube session automagically terminates some seconds after login while reading or composing a mail. The status bar indicates that the session has terminated and the user needs to relogin which makes roundcube unusable for such clients. The problem affects at least three different users, all running IE10 on Win7. I was not able to always reproduce the problem at any time but hope that anybody has seen similar issues and can point me to a solution. Oliver -- Protect your environment - close windows and adopt a penguin! PGP-Key: 3B2C 8095 A7DF 8BB5 2CFF 8168 CAB7 B0DD 3985 1721

2 2

Further to my previous post
by Robert Richards 20 Jun '13

20 Jun '13

Well, after many more tests I have discovered that TIFF images are displayed Ok. I also discovered that if I rename image.jpg to image.jpeg it too displays well. Only images with extension jpg fail to display. On my MACs, all Jpeg files are named with an extension of jpg, not jpeg. Roundcube fails to recognize extension JPG as a JPEG file even though they are the same. Is there a fix for this? -- "During times of universal deceit, telling the truth becomes a revolutionary act" - George Orwell

2 1

Update 0.9.2 released
by Thomas Bruederli 16 Jun '13

16 Jun '13

Hello folks We're proud to announce the second service release for the 0.9 series of Roundcube webmail. It contains 25 bug fixes and improvements as well as some translation updates for Estonian, Romanian Finnish and French. It's considered stable and we recommend to update all productive installations of Roundcube with this version. As usual, download it from http://roundcube.net/download, see the full changelog here: http://trac.roundcube.net/wiki/Changelog Have fun! Thomas

1 0

Roundcube behind reverse Proxy
by Axel Christiansen 14 Jun '13

14 Jun '13

Hi List, i am in the process of setting up roundcube behind an apache reverse proxy. Webclilent(https://my.site/webmail) -> apache proxy(http://192.168.3.3/webmail) -> roundcube server(at 192.168.3.3) It looks like the roundcube returns content with absolute url's. And these url's then look like "http://192.168.3.3" which from the inet wont work. Can please one give me some hints what screws to turn. Thank you. Regards, Axel

3 3

max file upload limitation
by Simon Loewenthal 14 Jun '13

14 Jun '13

Hi there, After an upgrade I ran into our 5Mb max file limitation. I thought this used to be set in the _main.inc.php_ as something like _upload_max_filesize_, but I didn't see this nor references to number 5. My next stop had been the /_etc/php5/apache2/php.ini_ and this has been set to_ upload_max_filesize = 10M_ and max_file_uploads = 9, so I don't think my problem lies in here. Do you know where I can find this setting? Thanks, S

2 2

[BUG?] Blank Date field everywhere
by Andrey Utkin 08 Jun '13

08 Jun '13

Literally, nothing is printed in "Date" field neither in folder letters listing, nor in letter viewer. Looking at original unparsed headers of letters show that they have correct dates in them. I use roundcube 0.9.1 installed through gentoo portage system. By default roundcube sticked with russian language, but now i changed it to english, and nothing changes. Also nothing changes on changing "Pretty dates" option. Apache is 2.2.23, php is 5.4.13. logs/errors file is full with lines like the one below. [07-Jun-2013 20:44:22 UTC] PHP Warning: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /var/www/blog.krieger.pp.ua/htdocs/roundcube/program/lib/Roundcube/rcube_db.php on line 758 -- Andrey Utkin

2 2

Empty Junk Folder
by ClanGistics 07 Jun '13

07 Jun '13

Hello, I believe I am not getting some messages and that they are going to my Junk folder. How can I change my settings to see what is in my Junk folder? It always shows it is empty. Thank you, Jon

3 5

mobile skin broke when I upgraded from 0.8 to 0.9
by Brian Gold 05 Jun '13

05 Jun '13

Hi all. don't know if anyone here can help with this. I'm running 0.9.1, having recently upgraded from 0.8.x. Due to requests from my users, we purchased this skin: http://roundcubeskins.net/portfolio/iclassic/ specifically for the mobile view. Unfortunately, it broke when we moved to 0.9 and the developer has been unreachable. Specifically, our mobile users (iPhone, android, etc) are unable to scroll up or down in the mobile view. When they try to, it appears that an email is getting selected for "drag & drop" behavior rather than scrolling the view. Here is a link to what the mobile view appears as: http://i.imgur.com/a6cV1aG.png If anyonehas any suggestions as to what I can do to resolve this or how I can get in touch with the developer, please let me know.

3 2

Re: [RCU] mobile skin broke when I upgraded from 0.8 to 0.9
by Brian Gold 05 Jun '13

05 Jun '13

On 2013-06-05 12:23 pm, Arne Berglund wrote: > On 2013-06-05 09:03, Brian Gold wrote: > > > You're going to need to find the developer on that. Skins like that > are very specific to a particular RC version. If you are using custom > skins, they need to be tested for compatibility prior to upgrading RC > versions. > > The same is true for third-party plugins. > Damn. Don't suppose anyone knows of any other mobile friendly skins for 0.9?

2 1

Zimbra server and roundcube INBOX messages list problems
by kaifamm＠libero.it 03 Jun '13

03 Jun '13

Hi, I have a problem with my zimbra server 7.2.3 with which, however, use rouncube as imap client , when a new message arrives, the number of unread messages in INBOX on the left box is updated while the list of messages to the center box (subject, date, sender, etc.. ) it does not appear, appears only changing folder. I've tried various settings on zimbra, I also tried to enable and / or disable the proxy imap but it does not work. I also tried various settings in IMAP section in CR especially with imap_force_caps but does not work. Any ideas ? Thank you Marco

1 0

Zimbra server and roundcube INBOX messages list problems
by kaifamm＠libero.it 02 Jun '13

02 Jun '13

Hi, I have a problem with my zimbra server 7.2.3 with which, however, use rouncube as imap client , when a new message arrives, the number of unread messages in INBOX on the left box is updated while the list of messages to the center box (subject, date, sender, etc.. ) it does not appear, appears only changing folder. I've tried various settings on zimbra, I also tried to enable and / or disable the proxy imap but it does not work. I also tried various settings in IMAP section in CR especially with imap_force_caps but does not work. Any ideas ? Thank you Marco

1 0

Non-commercial roundcube CalDAV Plugin?
by Yannik Sembritzki 31 May '13

31 May '13

Hello, I was wondering if there were any non-commercial roundcube caldav plugins available? Thanks Yannik

2 1

Fwd:
by Robert Dilley 30 May '13

30 May '13

http://www.natureandfitness.com/ps22ga.php

1 0

Attachment reminder
by madalin 30 May '13

30 May '13

Hello, I tried installing attachment reminder (latest zip from github) and sadly i got a 500 after installing it. I'm using 0.8.5. What actions should i take in order to make it work ? Thanks. P.S: I'm trying to join the romanian team on the transifex page. -- Regards, madalin http://madalin.eu

6 8

List options To column problem
by Thijs Stuurman 28 May '13

28 May '13

Guys, I am testing 0.9.1 and I run in to the same problem as I had with 0.9.0 with the columns. First of all, when I clear a user preferences (through MySQL) all is well and ok, meaning: - When I view the Inbox I see the following columns in order: Subject, (blue star)), From, Date, Size, Flag (I think, yellow star), Has Attachment - When I view the Sent items box I see the following columns in order: Subject, (blue star), To, Date, Size, Flag (I think, yellow star), Has Attachment But the To column is not part of the options in the List Options... screen. Only the From/To and when I set anything I will lose the To column. Using the From/To results in a Sent box view with a column set on From (it does not switch to To). The only way to reset it all and get back the To column is to clear the preferences for the user. I already restored the main.inc.php from the 0.9.1 archive but to no avail in fixing this. Also I suspect this must be a problem for everybody?? Met vriendelijke groet, Thijs Stuurman System Administrator Security Officer Nxs managed services Kabelweg 37, 1014 BA, Amsterdam T. +31 (0) 20 58 11 077 (Technisch) T. +31 (0) 20 58 11 080 (Commercieel) F. +31 (0) 20 58 11 071 E. beheer.bravo(a)nxs.nl

1 1

PDF view in new Tab stopped working with v0.9 ?
by Philip Rhoades 27 May '13

27 May '13

People, This function seemed to stop with version 0.9 - I just updated to v0.9.1 but the problem remains. I checked the Settings options but couldn't find any config options there. Is this a known problem or am I missing something? Thanks, Phil. -- Philip Rhoades GPO Box 3411 Sydney NSW 2001 Australia E-mail: phil(a)pricom.com.au

1 0

Error
by Aaron Tily 26 May '13

26 May '13

I get an error saying referral check invalid when I have mailto roundcube by default for email addresses. -- Regards, Aaron Tily FB92 Web Media Limited Christchurch, New Zealand

1 0

Apache 403 Forbidden issues in 0.8.1?
by Arne Berglund 25 May '13

25 May '13

All, I've been running 0.8.1 in production since shortly after its release. Ever since moving from 0.7.2, my Apache logs are being flooded with "403 Forbidden" errors. A typical example is: 2xx.xx.xxx.xx - - [01/Oct/2012:06:24:22 -0700] "GET /webmail/?_task=mail&_action=keep-alive&_remote=1&_unlock=0&_=1349097860835 HTTP/1.1" 403 15 Any ideas what might be going on here? Of how to deal with it? Environment: RHEL5, Apache 2.2.3, PHP 5.3 -- Arne Berglund System Administrator, Internet Services Lane Education Service District Eugene, OR ____________

4 4

Upgrading from 0.86 to 0.91 with ./bin/installto.sh
by Simon Loewenthal 22 May '13

22 May '13

Hi there, Every now and again I try to use the installer script included with RC for upgrading. This has never worked for me, likely because my PHP knowledge sucks. I did not get around this error message six months ago: # ./bin/installto.sh /www/roundcube -su: ./bin/installto.sh: Permission denied # ls -l bin/installto.sh -rwxr-xr-x 1 501 80 3458 May 16 20:06 bin/installto.sh # which php /usr/bin/php Does anyone know what the trick is? Regards, S

2 2

Sent items sort column To missing
by Thijs Stuurman 21 May '13

21 May '13

Roundcube users, Version: 0.9.0 Perhaps I have another flaw in my main.inc.php but I cannot select the column To for sorting in the Sent Items folder. Sorting on From is useless as they were all sent From the same address on the account. There is a Reply-To column but its empty. I edited the main.inc.php and added 'to' but it doesn't show up: // These cols are shown in the message list. Available cols are: // subject, from, to, cc, replyto, date, size, status, flag, attachment $rcmail_config['list_cols'] = array('subject', 'status', 'from', 'to', 'replyto', 'date', 'size', 'flag', 'attachment'); If I click on the Edit button for the columns it shows under List columns the "From/To" but I only get the column From? Can't seem to switch it to "To". (I actually managed to add another From column which is empty :s) Thanks in advance! With kind regards, Thijs Stuurman System Administrator Security Officer Nxs managed services Kabelweg 37, 1014 BA, Amsterdam T. +31 (0) 20 58 11 077 (Technisch) T. +31 (0) 20 58 11 080 (Commercieel) F. +31 (0) 20 58 11 071 E. beheer.bravo(a)nxs.nl

1 0

Inserting a text file ?
by Philip Rhoades 21 May '13

21 May '13

People, Is there any way of inserting a text file from the local file system? - there doesn't appear to be (v0.9). In the past I have added text directly to the saved draft file but this is a bit clumsy . . Thanks, Phil. -- Philip Rhoades GPO Box 3411 Sydney NSW 2001 Australia E-mail: phil(a)pricom.com.au

1 0

Update 0.9.1 released
by Thomas Bruederli 20 May '13

20 May '13

Hello folks We proudly announce the first service release for the 0.9 series of Roundcube. As usual, it contains some bug fixes and improvements which didn't make it into the first stable version as well as some translation updates. After getting reports that some skin images weren't reloaded due to progressive cache settings, the packaged version now comes with unique urls of skin images referenced by templates and CSS files. If you're pulling the source directly from git you can achieve the same by running bin/updatecss.sh It's considered stable and we recommend to update all productive installations of Roundcube with this version. Download it from http://roundcube.net/download, see the full changelog here: http://trac.roundcube.net/wiki/Changelog Have fun! Thomas

2 1

roundcube-forgot_password plugin
by Suja Amitabh 17 May '13

17 May '13

Dear rc users, I have installed roundcube-forgot_password plugin. When I am clicking on the link in my alternate email to reset the password, I am getting the settings page home. The new_password_form is not getting displayed. I am not getting any error also in my log files. What can be the reason. Please help me to sort it out. Thanks in advance.

1 0

Broadcast email id for the domain
by Suja Amitabh 17 May '13

17 May '13

Dear RoundCube users, I am new to rc and couldn't find a way to create a broadcast mail id or subscription lists. I dont want a address group; I need a common mail id to which anybody can send mails from any domain and all the users in my domain will get the mail. Please do reply. Thanks in advance, Suja

2 2

move calendar events to another user
by Gustavo Sansone 15 May '13

15 May '13

hello. i'm trying to figure out how to move the events created by one user to another user's calendar. i have installed calendar plug in (myroundcube free version), and could export an ics file, but cannot import it on the other user's calendar. it doesn't have an import option. do i have another option or am i missing something? i'm thinking of doing it moving the content directly in database, but don't want to broke the db. thanks in advance.

1 0

Original message missing
by Thijs Stuurman 15 May '13

15 May '13

Roundcube Users list, I have Roundcube 0.9.0 and when I reply an email the Original Message is not being shown nor send with the reply. A forward however does contain the Original Message. I cannot find any options on this either. Does anybody know what is going wrong for me? Met vriendelijke groet, Thijs Stuurman System Administrator Security Officer Nxs managed services Kabelweg 37, 1014 BA, Amsterdam T. +31 (0) 20 58 11 077 (Technisch) T. +31 (0) 20 58 11 080 (Commercieel) F. +31 (0) 20 58 11 071 E. beheer.bravo(a)nxs.nl

3 3

tutorial in spanish roundcube
by Ricardo Adolfo Sánchez Arboleda 14 May '13

14 May '13

List, I need a tutorial to install roundcube version.0.7,, Spanish .. in debian thanks *Saludos;*

2 1

new_user_identity issue with RCU 0.9
by Cedric Foll 14 May '13

14 May '13

Hi, I was using new_user_identity plugin with RCU 0.8 without problems. I've just upgrade to 0.9 and it doesn't work anymore. I don't have any error message but the pluggin seem to stop to fill user identity when a new user log to the webmail. I've did a tcpdump during user login and no ldap request is sent. When i go to "a propos", the plugin is listed as used in his 1.0.7 version. Any idea? Regards -- Cedric Foll Architecte infrastructures Direction des Systèmes d'Information Bureau A2-177 Université Charles de Gaulle - Lille 3 Domaine universitaire du Pont de bois BP 60149 59653 Villeneuve d'Ascq Tel : 03 20 41 64 35 Fax : 03 20 41 60 01 Portable : 06 37 24 06 55

2 2

Cannot import addresses from my vCards (Mac "address book" app.)
by Junior Marbles 07 May '13

07 May '13

Any idea why this is not working? (I use OS 10.7.5 and Safari 6.0.3 Thanks, JM

1 0

autocomplete with LDAP address book
by Zach 01 May '13

01 May '13

I recently implemented the LDAP address book using anonymous login and read-only access. It seems to be working (i.e. I can click on "Address Book" and see the addresses I want to see). However, when composing a new email, it doesn't auto-complete addresses I begin to type with those in the global address book. From some quick googling, I understand that this is supposed to be an out-of-the-box feature. How can I enable this feature? -Zach

2 2

BUG 0.9.0 trash deleting
by Noel Butler 23 Apr '13

23 Apr '13

Some members wish to empty trash manually, by delete and not "empty", this way preventing select messages from being expunged. case 1: Success- highlight all messages, deletes, working same as the empty folder option. case 2: Failure- highlight all messages, control un-select a few messages to keep, results in no deletions at all. I have verified this members report on use of a separate (test) account.

2 4

can't access calendar after update to 0.9.0 (only with larry)
by Gustavo Sansone 23 Apr '13

23 Apr '13

Hi, i recently updated to 0.9.0, and then updated plugin_manager and downloaded all the updates (including Calendar 14.1.2). i like very much the new version, seems stable and the new features are working very well. now i'm having only one problem with my calendar doesn't shows on larry theme (keep loading, with grey screen), but if i switch to classic then the calendar works fine. on logs/errors it prints a few lines like this every time i reload the page (only if using larry) DB Error: [1054] Unknown column 'reminder' in 'field list' in /var/www/localhost/htdocs/mail/program/lib/Roundcube/rcube_db.php on line 416 (GET /mail/?_task=dummy&_action=plugin.calendar_fetchalllayers&_start=1366599600&_end=1367463600&_category=&_tzname=America%2FMontevideo&_echo=1&_=1366605261839) i did run udpate.sh after 0.9.0 upgrade any clue?

1 0

RCU 0.9 and new_user_dialog
by Marcio Merlone 22 Apr '13

22 Apr '13

Hi folks, I am testing RCU 0.9 and found that the new user dialog plugin is not behaving good for me. It shows up the dialog, I make some input, click save, the screen gets reloaded and there is the dialog again, with the inputed data - saved at least. Only way out of the dialog is kill the cookies and login again, then no dialog anymore, as expected. Also, I'd like to suggest two new features: default values (for organization), and template support (for signature). I already use new_user_identity, so it gets name and mail address from LDAP, but organization and signature would be great for large/enterprise deployments. Best regards. -- *Marcio Merlone* TI - Administrador de redes *A1 Engenharia - Unidade Corporativa* Fone: +55 41 3616-3797 Cel: +55 41 9689-0036 http://www.a1.ind.br/ <http://www.a1.ind.br>

1 1

Formatting change with v0.9.0 ?
by Philip Rhoades 22 Apr '13

22 Apr '13

People, Pre my update from the beta of v0.9 I could use blank spaces at the beginning of lines like: xxx xxx xxx __zzz zzz zzz xxx xxx xxx but with v0.9.0 I get: xxx xxx xxx zzz zzz zzz xxx xxx xxx - how do I get the old behaviour back? Thanks, Phil. -- Philip Rhoades GPO Box 3411 Sydney NSW 2001 Australia E-mail: phil(a)pricom.com.au

2 2

Stable version 0.9.0 released
by Thomas Bruederli 20 Apr '13

20 Apr '13

Hello folks We can proudly announce the next stable release of Roundcube. This version enhances the webmail experience with these new features: * Improved rendering of forwarded and attached messages * Optionally display and compose email messages a new windows * Unified UI for message view and composition * Show sender photos from contacts in email view * Render thumbnails for image attachments * Download all attachments as zip archive (using the zipdownload plugin) * Forward multiple emails as attachments * CSV import for contacts The major change of this version isn't really visible to the users but even more important for the developers: the Roundcube framework. We decoupled the core functions for IMAP access, SMTP email sending, database abstraction, caching, etc. from the webmail application in order to make them usable for other free software products. Another major change since the 0.8 series is the new database abstraction layer. In order to add support for SQLite3, the PEAR:MDB2 dependency was dropped and Roundcube now uses the native PHP Data Objects (PDO). It's enabled by default since PHP 5.1 and is considered stable and well-developed. One drawback, however, is a small lack in the MySQL PDO driver which makes PHP 5.3 a requirement for this version of Roundcube when using the MySQL database. A minor but rather handy improvement is a complete new database update mechanism that makes schema changes much easier to be deployed. After the upgrade, simply run bin/updatedb.sh to apply the necessary changes to the database Roundcube connects to. In case you used bin/installto.sh to perform the update, the schema upgrades are done applied and no further actions are required. After lots of testing and collecting your feedback, this version is considered stable and it also includes the recently discovered vulnerability that allows an attacker to modify its users preferences in a way that he can then read arbitrary files from the server. We therefore recommend to update all productive installations of Roundcube. Download both the webmail and the framework packages from http://roundcube.net/download Read the full list of changes here: http://trac.roundcube.net/wiki/Changelog IMPORTANT: We're still getting a lot of support requests from users who are under the impression that Roundcube is a public service such as Gmail or Hotmail. Unfortunately we cannot help these people and thus we'd like to encourage everybody once more to enter an URL to the option named 'support_url' in the Roundcube config. This will be display a link on all screens including the login page that should guide your users to instructions how to get help for your specific email service that uses Roundcube. Thanks a lot for using Roundcube and for your support! Best, Thomas

5 4

Addressbook CSV Format
by Stefan Xenon 20 Apr '13

20 Apr '13

Hi! I would like to import an addressbook in CSV format. I exported it from a database and would tweak it manually according to Roundcube's requirements. Simple fields like firstname, surname, name and email would be sufficient. All my attempts failed and Roundcube complaint about wrong format. Could somebody help me please and describe how the CSV should be formatted? Regards, Jan

3 7

Managesieve plugin in 0.9
by Andrea Cappelli 20 Apr '13

20 Apr '13

Hi, I tried version 0.9, which seems to work very well I have two question about managesieve plugin 1) When i try to select "Forward message" as action a select with folders is showed, but whne i save the select disappear and an input (for an email address) is shown. If I manually edit the sieve file on the server (using fileinto) I can see the select pointing to the right folder 2) There is a plan to add more sieve capabilities, I remember that in an older version of RC (perhaps 0.6.5) there were much more than today Best regards Andrea

2 2

Internet Explorer 10 quirks...
by Aleix Dorca Josa 19 Apr '13

19 Apr '13

Hi all, we are using RC version 0.7.4 and have experienced some problems with IE10. To be precise when composing a new message and trying to add CC or BCC's to it the boxes are very small and are a pain to work with. Enabling compatibility mode (the broken page at the right of the url) solves the problem, of course. Does anyone know if this also happens on versions 0.8.x or even 0.9? Will it be solved on the 0.7.x branch? Thanks a lot and sorry to bother, Aleix.

4 3

Read Notes Domino
by everton rocha 18 Apr '13

18 Apr '13

How to read a nsf files in lotus domino 7 ? i have a domino server in other server. I want to read nsf files in iradmail instaled in other server. I think that i need to configure a postfix to do this. Please, can help me ? Regards Everton Rocha

2 1

Composer - some had work with that? - directadmin
by dominik.t 18 Apr '13

18 Apr '13

Hello i use directadmin and roundcube in version 0.9.0 Composer work, but i get verytime error: Loading composer repositories with package information Installing dependencies Your requirements could not be resolved to an installable set of packages. Problem 1 - The requested package cor/message_highlight could not be found in any version, there may be a typo in the package name. Potential causes: - A typo in the package name - The package is not available in a stable-enough version according to your minimum-stability setting see <https://groups.google.com/d/topic/composer-dev/_g3ASeIFlrc/discussion> for more details. Read <http://getcomposer.org/doc/articles/troubleshooting.md> for further common problems. How i can install some plugin? My composer.json: "require": { "cor/message_highlight": "2.2" } }

2 1

Loading hangs after server upgrade - maybe HTML mail problem?
by Philip Rhoades 15 Apr '13

15 Apr '13

People, After upgrading from Fedora 16 x86_64 to Fedora 18 x86_64 my RC setup (v0.9-beta that is unchanged) has ground to a halt - I click on a HTML mail (plain text mails seem to be OK) and "Loading . ." shows for ages and finally disappears with the preview pane still blank and sometimes the window is then unresponsive. Could it be something missing out of the new httpd.conf? Suggestions? Thanks, Phil. -- Philip Rhoades GPO Box 3411 Sydney NSW 2001 Australia E-mail: phil(a)pricom.com.au

1 2

PHP Warning after upgrade to 0.8.5
by Javid Freeman 08 Apr '13

08 Apr '13

I have disabled all plugins and I am getting this error message in the logs: [08-Apr-2013 10:36:58] PHP Warning: date_default_timezone_get() [<a href='function.date-default-timezone-get'>function.date-default-timezone-get</a>]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Los_Angeles' for 'PDT/-7.0/DST' instead in /var/www/roundcube/program/include/rcube_config.php on line 408 The date column is complete blank when listing emails for all inbox folders on the server. Below is what I have for the timezone settings in the main.inc.php .... // use this format for date display (date or strftime format) $rcmail_config['date_format'] = 'Y-m-d'; // give this choice of date formats to the user to select from $rcmail_config['date_formats'] = array('Y-m-d', 'd-m-Y', 'Y/m/d', 'm/d/Y', 'd/m/Y', 'd.m.Y', 'j.n.Y'); // use this format for time display (date or strftime format) $rcmail_config['time_format'] = 'H:i'; // give this choice of time formats to the user to select from $rcmail_config['time_formats'] = array('G:i', 'H:i', 'g:i a', 'h:i A'); // use this format for short date display (derived from date_format and time_format) $rcmail_config['date_short'] = 'm/d/Y h:i'; // use this format for detailed date/time formatting (derived from date_format and time_format) $rcmail_config['date_long'] = 'm/d/Y h:i'; .... Any help is appreciated, thanks! Javid

2 1

RoundCube , ImapProxy and Dovecot - some questions?
by Simon Loewenthal 07 Apr '13

07 Apr '13

Hi there and a special hi to those who read this on the weekend, I have had a working RoundCube installation for years - RC rocks! I decided to add SquirrelMail's IMAPPROXY into the mix to speed it all up, but cannot get RC to work with it. Everything runs on localhost, ImapProxy 1.2.7-1, RC 0.8.6 and with Debian 6.0.7 I've modified the RC configuration as follows: // TCP port used for IMAP connections $rcmail_config['default_port'] = 1993; # telnet localhost 1993 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ LOGIN-REFERRALS ID ENABLE AUTH=LOGIN XIMAPPROXY] Dovecot ready. a1 logout * BYE LOGOUT received a1 OK Completed However, using the RC webmail logins failed. ImapProxy did not log any thing to LOG_MAIL, but this is expected because a failed log in should not be an imapproxy problem. I'd be grateful if someone would let me know if this problem has cropped up before, and where should I look. Cheers, Simon -- fight apathy or don't simon@klunky / .co.uk / .org pgp 4BA78604

4 6

Server settings/ iphone
by Esoteric London 07 Apr '13

07 Apr '13

How do I find out what the server settings are to see my emails on my Iphone? I need to find and incoming server host name and an outgoing server host name. Kind Regards, Chloe Hope King Creative Director Esoteric London 07880498368 esoteric-london(a)live.co.uk <mailto:esoteric-london@live.co.uk> Twitter - @EsotericLDN www.esoteric-london.com <http://www.esoteric-london.com>

3 2

what does roundcube use mysql for?
by Grant 05 Apr '13

05 Apr '13

roundcube seems to require mysql. What is it used for if mail is kept in the .maildir? - Grant

6 8

hide button text?
by Grant 01 Apr '13

01 Apr '13

Can the "Refresh, Compose, Reply..." button text be hidden? - Grant

1 0

Security updates 0.8.6 and 0.7.3 for save-pref vulnerability
by Thomas Bruederli 27 Mar '13

27 Mar '13

After getting reports about a possible vulnerability of Roundcube which allows an attacker to modify its users preferences in a way that he/she can then read files from the server, we now published updated packages as well as patches that fix this security issue. Please update all your Roundcube installations with the new versions (0.9-rc2, 0.8.6, 0.7.4) or patch them with the published patches. Download the latest version from http://roundcube.net/download Patch for 0.9.x: http://ow.ly/jtQD0 Patch for 0.8.x: http://ow.ly/jtQHM Patch for 0.7.x: http://ow.ly/jtQK0 Patch for 0.6: http://ow.ly/jtQNd In order to find out whether one of your users has vulnerable preferences, you can run the following query on the Roundcube user database: SELECT * FROM users WHERE preferences LIKE '%generic_message_footer%' If this returns any results, you should at least clear the 'preferences' field of that user entry. Or better: entirely block the user because he or she most likely tried to exploit your system. And here's some background about the vulnerability: http://lists.roundcube.net/pipermail/dev/2013-March/022328.html Best regards, Thomas

1 0

Roundcube latest stable vulnerability
by Dmitry Korzhevin 27 Mar '13

27 Mar '13

Translation from Russian: http://translate.google.com.ua/translate?sl=ru&tl=en&prev=_t&hl=en&ie=UTF-8… Best Regards, Dmitry --- Dmitry KORZHEVIN System Administrator STIDIA S.A. - Luxembourg e: dmitry.korzhevin(a)stidia.com m: +38 093 874 5453 w: http://www.stidia.com

2 1

Re: [RCU] change default skin [SOLVED]
by Luciano Gabriel Andino 24 Mar '13

24 Mar '13

2013/3/24 Reindl Harald <h.reindl(a)thelounge.net> > > > Am 24.03.2013 16:11, schrieb Luciano Gabriel Andino: > > Hola, I've did a roundcube upgrade and users have larry skin as default > skin. How can I change it for all users to > > have the old default skin? > > > [root@localhost:~]$ cat /etc/roundcubemail/main.inc.php | grep classic > $rcmail_config['skin'] = 'classic'; > > thanks :) > > _______________________________________________ > Roundcube Users mailing list > users(a)lists.roundcube.net > http://lists.roundcube.net/mailman/listinfo/users > -- Saludos!! Luciano Andino GNU/Linux user #185103 Santa Fe - Argentina -----------------------------------------------

1 0

change default skin
by Luciano Gabriel Andino 24 Mar '13

24 Mar '13

Hola, I've did a roundcube upgrade and users have larry skin as default skin. How can I change it for all users to have the old default skin? thanks in advance, -- Saludos!! Luciano Andino GNU/Linux user #185103 Santa Fe - Argentina -----------------------------------------------

2 1

Line wrapping f*cked up upon forwarding - why?
by Michael Heydekamp 22 Mar '13

22 Mar '13

When I'm sending a plain text message (8bit-chars intentionally unchanged, as this might probably play a role, although unlikely in this particular case)... ---------------------------------------------------------------------------- xxxäxxxx xxxxx xxx xxxxx xxxäxxxxx xxxxxx xxxxx xxxxxx xxxxxxxxxx xxxxxxxxxx. xxxx xxxxx xxxxx xxxx xx xx.xx. xxxxxx xxxxxxxxxxxx, xxxx xx xxx xxxx xxxxxxxxxx xxxx xxx xxxxxxxx xxßxx, xxxxx xxx xxxxxx xxx xxxx xxx xxxxxx xxxxx xxxx xx xxxxxxx xxxxxx "xxx xxx xxx xxxxxxx". ---------------------------------------------------------------------------- ... and forward this mail (inline) to somebody else afterwards, then it looks nicely and exactly as above in the editor. But once being sent, is does look like this in the Sent folder: ---------------------------------------------------------------------------- xxxäxxxx xxxxx xxx xxxxx xxxäxxxxx xxxxxx xxxxx xxxxxx xxxxxxxxxx xxxxxxxxxx. xxxx xxxxx xxxxx xxxx xx xx.xx. xxxxxx xxxxxxxxxxxx, xxxx xx xxx xxxx xxxxxxxxxx xxxx xxx xxxxxxxx xxßxx, xxxxx xxx xxxxxx xxx xxxx xxx xxxxxx xxxxx xxxx xx xxxxxxx xxxxxx "xxx xxx xxx xxxxxxx". ---------------------------------------------------------------------------- Have a look at lines #2 and #3... This way it has been sent, and this way the recipient will see it. We call this a "Kammtext" (or "Kammzitat", if being a quote). Outlook Express was pretty famous for that, once a while ago... But why does Roundcube add an LF at the end of line #2 at all? Environment and relevant config settings: ----------------------------------------- · IE8, Win7/64, "$rcmail_config['line_length'] = 76;" · "$rcmail_config['send_format_flowed'] = false;" · Plugin 'sendcharset' installed and activated, current setting "ISO-8859-1" Hint: The last character of line #2 of the original mail is exactly at pos. #76... But that's very well within the range of the config setting "$rcmail_config['line_length']", so no reason to do a line wrap there, right? And if there should be a reason, why doesn't it apply to the original mail then? Ticket required? Cheers, -- Michael Heydekamp Co-Admin freexp.de Düsseldorf/Germany

5 15

LDAP: private user has to be manually created
by Parragh SZabolcs 17 Mar '13

17 Mar '13

Hi RC users, I need a bit of help with my LDAP setup. I followed the steps on this twiki page: http://trac.roundcube.net/wiki/Howto_Ldap to create a Public and a Private address book. Everything works fine, except for one thing: private users have to be manually inserted into the ldap directory, before they can add e-mails via the webapp to their private adrbook. So basically if there is a user as: "ou=myuser,ou=private,ou=rcabook,dc=localhost" all his addresses will be under this node. E.g. "dn: cn=Contact one,ou=myuser,ou=private,ou=rcabook,dc=localhost" The script on the twiki page creates: "dn: ou=private,ou=rcabook,dc=pojo,dc=hu". The webmail app would create: "dn: cn=Contact one,ou=myuser,ou=private,ou=rcabook,dc=localhost" My question is: what should create "dn: cn=user,ou=private,ou=rcabook,dc=pojo,dc=hu" ? Does it have to be created manually for each user? (After doing that everything works as desired - still it would be painful to do that for all users.) The twiki page has a slapd.conf attached, which has this section which made me thing, the public user would create these entries but they don't get created: # Grant the Roundcub user to create private users access to dn.one="ou=private,ou=rcabook,dc=localhost" attrs=userPassword by dn="cn=rcuser,ou=rcabook,dc=localhost" write by anonymous auth by self write by * none Am I misunderstanding something? Any help is appreciated! Thanks, Szabolcs

4 4

problem with sneding mass e mails
by info＠crearefoundation.nl 16 Mar '13

16 Mar '13

Hi, We are experiencing a big problem when sending mass emails. We are sending 500 e mails daily and we noticed that after the 1st 100 e mails all the rest of e mails are returning to sender. We do not exceed the max ammount of 200 e-mails per sent mass email. Please we need urgent support with his issues, as we are in the middle of an important marketing campaing. Looking forward to any sugestions you may have. Thanks Carmen

7 11

How to get old emails back on this account as missing - Thanks
by bana.gora＠muslimwomenscouncil.org.uk 16 Mar '13

16 Mar '13

9 11

Message list randomly showing (no subject) Roundcube .8.5
by Mike Thompson 13 Mar '13

13 Mar '13

Hi, I upgrade my Mac OS X 10.8.2 server to the latest Server Software and it cause a bug in roundcube where messages would randomly show (no subject) in the message list but the preview pane displays the message correctly. I duplicated this on another server running the same software as well. It was working great before the update. I moved roundcube to a 10.7 Mac Server with all the updates and it is working perfectly perfectly there. All servers are running the same PHP version and Apache. I have searched high and low to come up with a solution for this issue to no avail. Any help would be appreciated. Thanks Mike

3 6

referer_check
by Bob Miller 12 Mar '13

12 Mar '13

Hello, I have a very recent install of roundcube where the users are (were) experiencing an error "request check failed" in two places. I traced this to a referer error in the logs, which I then chased to the referer_check setting in main.inc.php. Setting referer_check to false has solved both symptoms. The first place this was happening is viewing attachments within the browser. when one clicks on a pdf attachment he has received, for example, the new tab/window will open with the link to download and the request check failed error message where you would normally view the document. with referer_check=false, the new tab/window opens, shows the download link and the document. The second place I was seeing the error message was with the login page. If I open a second tab and brought it to the login page while I was already logged in, I would get the error, or if I closed the browser without logging out I would usually get that error. Once it happens, the only way I found to clear it was to delete the related cookies. I haven't tested extensively yet, but so far it appears referer_check=false has also corrected this problem. Having just read up a bit on http referer headers, I start to see that it would be better to not leave the referer_check option at false. However, the above symptoms aren't really going over with the users to well, especially the login page one. I do not find anyone reporting similar on the web yet, so I am thinking I must have missed something in my config, but I went over it and didn't find anything. Have I missed an obvious configuration option somewhere that would allow me to keep referer_check=true and still let my users see their documents and not have to clear their cookies every time they encounter the error on the log on page? -- Computerisms Bob Miller 867-334-7117 / 867-633-3760 http://computerisms.ca

2 2

Bug in Settings / Filter
by Andrea Cappelli 11 Mar '13

11 Mar '13

Hi all, I upgraded RoundCube to 0.8.5 from a previous 0.6.x and I found something strange in the filter section of settings 1) In the 0.8.5 there are fewer options respect to which action I can do (vacation, mark, etc) 2) The option redirect to let me choose only from a select which contains my folder, and not to forward to an external mail address. But if I choose a folder and savethen receive an error and the select changes and became an input in which I can put the external address. Maybe I'm missing something or I have wrong configured something, has anyone seen the same behaviour? Are there plans to implement missing options in the new release? Thanks Andrea

1 0

Send composed email at specific time
by shomalboy shomalboy 10 Mar '13

10 Mar '13

Hello Is there a plugin for roundcube, for sending emails at specific time? for example, when u compose an email,there is a feature to set the time for sending that.(hh,mm, tomorrow or based on roundcube calendar) If not,would you mind explaining, the structure or topology for implementing that feature in our mail server(postfix+dovecot+roundcube). Regards Iman

3 3

sorting of messages
by Andreas Meyer 09 Mar '13

09 Mar '13

Hello! I'd like to have newest messages at first in the messagesview and set $rcmail_config['message_sort_col'] = 'date'; $rcmail_config['message_sort_order'] = 'ASC'; but that does not seem to have any effect. What can I do to have the sorting I'd like to have? Kind regards Andreas

2 3

Need help w/adding my roundcube webmail account to android phone
by Philip Adams 09 Mar '13

09 Mar '13

I can't find the Incoming and Outgoing Server info (including Port #s) that I need in order to add my Roundcube IMAP email account to my Smartphone; where can I find them? Thanks.

3 2

a question about sieve filters
by Andreas Meyer 06 Mar '13

06 Mar '13

Hello all! In dovecot using managesieve I defined filters like this: if header :contains "From" "fred(a)anup.de" { vacation :days 1 :subject "Bin isch konkret nischt zu Hause!" "Geniesse das konkrete Wetter am Baggasee Bis dann"; } That works with my MUA claws-mail. Now when I login to roundcube and choose filters, I find this in the log of dovecot: Mar 06 14:26:10 managesieve(anmeyer(a)anup.de): Warning: sieve-storage: Active sieve script symlink /var/spool/vhosts/anup.de/anmeyer/.dovecot.sieve is broken: invalid/unknown path to storage (points to /var/spool/vhosts/anup.de/anmeyer/.sieve/managesieve.sieve). But I guess the path objected is correct. And roundcube made this out of my filters: if header :contains "From" "fred(a)anup.de" { vacation :days 1 :subject "Bin isch konkret nischt zu Hause!" text: Geniesse das konkrete Wetter am Baggasee Bis dann . ; } Now what's to do? If I define a filter in roundcube, it omits the :days 1 for example. What scheme is the right one? Every hint apprecheated! Andreas

1 0

Release candidate for version 0.9
by Thomas Bruederli 02 Mar '13

02 Mar '13

Hello all, We just published the feature-complete release candidate for the upcoming version 0.9. After adding some neat new features in 0.9-beta we now stabilized the code for the final release. Read http://trac.roundcube.net/wiki/Changelog for details. Download it from http://roundcube.net/download and update your testing systems. Use either the installto.sh or update.sh scripts to do the update as described in the UPGRADING instructions. These will take advantage of the new database schema upgrade mechanism we just added. That should make it easier and safer to keep the local database schema up-to-date with the new versions. And please report remaining bugs to our bug tracker. Best regards, Thomas

1 0

Missed files
by Евгений Гайдук 02 Mar '13

02 Mar '13

Hello! i got trouble, i used roundcube and after i synchronize rounduce with outlook all my mesages was gone ( Outbox ) What do i need to do?

2 3

how to generate a RC search URL that you could click?
by Florin Andrei 01 Mar '13

01 Mar '13

In RoundCube, enter "billy bob" in the search field in the upper-right corner and hit enter. Then look at the web server logs. You will see something like this: XXX.YYY.ZZZ.WWW - - [01/Mar/2013:12:17:38 -0800] "GET /webmail/?_task=mail&_remote=1&_action=search&_q=billy%20bob&_mbox=INBOX&_headers=to,text&_filter=ALL&_=1362169057912&_unlock=loading1362169057911 HTTP/1.1" 200 260 "http://CENSORSHIP-WAS-HERE/webmail/" "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.22 (KHTML, like Gecko) Chrome/25.0.1364.97 Safari/537.22" Now, if you copy that long link, preface it with http://your-webmail-server/ and enter it in your browser, you get an error. Or, at least, I did. I tried to tweak some of those variables, eliminate some of them. I either get "invalid request" on a white page, or "SERVICE CURRENTLY NOT AVAILABLE" on a nicer page. Is there an easy way to pass a search URL like this to RoundCube, from an external link? Assuming, of course, you're already logged in to RC. -- Florin Andrei http://florin.myip.org/

2 1

RC and php5.4.12
by Nick Edwards 26 Feb '13

26 Feb '13

Hi, Using RC 0.85, linux, mysql, upgrading our servers, successfully from apache 2.4,3 to 2.4.4, now preparing to move our servers from php 5.3.22 to 5.4.12 and we have a problem, RC fails to login reporting "invalid session data" when we restart with 5.4.12. We completely disabled suhosin, even temporarily removed open base restrictions and our list of disable functions so it has cart blanch access to everything, but no go. Whats we see logged in errors file is: PHP Warning: session_write_close(): Failed to write session data ( user). Please verify that the current setting of session.save_path is correct (/var/spool/phpsessions/) in /opt/webmail/program/include/rcmail.php on line 1340 Yes the save path is correct, exists and correct permissions, after all, it works fine with php 5.3.x in apache vhost conf we have: php_admin_value session.save_path "/var/spool/phpsessions/" Besides that, even the system fallback default in php.ini is /var/spool/phpsessions I must be missing something so blatantly obvious, but a code jockey I am not. Is there a trick to getting RC going with 5.4.x ? Thanks Niki

3 4

Fwd: [RCD] RoundCube Calendar
by Thomas Bruederli 25 Feb '13

25 Feb '13

Good news, folks :-) please read below. ---------- Forwarded message ---------- From: Chris Moules <christopher(a)gms.lu> Date: Fri, Feb 22, 2013 at 1:14 PM Subject: Re: [RCD] [RCU] RoundCube Calendar To: Roundcube Development discussion mailing list <dev(a)lists.roundcube.net> Cc: Thomas Bruederli <thomas(a)roundcube.net> On 14/02/13 10:00, Thomas Bruederli wrote: > Nieścierowicz Adam wrote: >> So when looking through google, I found resources on the stand AGPL license >> client thought that maybe someone is willing to finish on AGPL license. > > The calendar module provided by Kolab is under APGL but currently lacks a > CalDAV backend. There are plans to add this but the work for that isn't > scheduled yet. >> >> Personally, I am ready to sponsor a programmer, maybe others willing to help? > > I could connect you with the programmers who announced their intents to add > CalDAV to the Kolab calendar module. Or maybe they're even listening on > this list (therefore cc-ing the dev list). > > Regards, > Thomas Hello, we at GMS (http://www.gms.lu/ - https://github.com/GMS-SA/)are the company Thomas hinted at who are working on CalDAV and CardDAV support. The Calendar support is implemented by extending the Kolab plugin(s). A CalDAV driver is being implemented for calendar and tasklist plugins. The CardDAV support is being implemented as a new and independent plugin as the Kolab addressbook is completely different and does not support backend 'drivers'. Our CalDAV implementation is using the SabreDAV (http://code.google.com/p/sabredav/) and the sabre-vobject (https://github.com/evert/sabre-vobject) Libraries. In both cases our target CalDAV/CardDAV server is SOGo (http://www.sogo.nu/). Development is trying to stay as RFC complaint as possible. There are cases, however, where SOGo diverges from the RFC or the RFCs were published later than features were implemented in SOGo. In such cases it is planned to have config options for server support so that this does not become a SOGo plugin. Our main focus is SOGo as this is what we are using. Work is well underway. Most functionality is implemented but there is still lots to do before a release is expected. We are not talking years but probably over 1 month. Regards, Chris P.S. Thomas, if you wish to re-post this to the 'users' list, to which I am not subscribed, please feel free. _______________________________________________ Roundcube Development discussion mailing list dev(a)lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/dev

3 2

Problem receiving emails
by Giuseppe Liberati 23 Feb '13

23 Feb '13

Good evening over the past week all of a sudden no new message arrived at my account gliberati(a)ad-valoramos.com It was possible to receive message but none was received. Apparently my email box is full but can`t access it to clean it up. The mentioned account is my business one and this lack of service is creating me lots of problems. Thank you for a prompt answer Joe Liberati

2 1

Re: [RCU] RoundCube
by Steve Perkins 21 Feb '13

21 Feb '13

Try: http://git.kolab.org/roundcubemail-plugins-kolab/tree/plugins [3] Calendar and Tasklist. Kolab or MySQL backends. Both seem pretty good. I use them (in a small way) anyway. On 12.02.2013 07:34, Nieścierowicz Adam wrote: > Hello, > > searching a calendar for RC I found a http://code.google.com/p/myroundcube/source/browse/trunk/plugins/#plugins%2… [2] > > Reading license (AGPL) shows that the code can be modified, perhaps there is someone willing to deal with this plugin? > > Regards > > _______________________________________________ > Roundcube Users mailing list > users(a)lists.roundcube.net > http://lists.roundcube.net/mailman/listinfo/users [1] Links: ------ [1] http://lists.roundcube.net/mailman/listinfo/users [2] http://code.google.com/p/myroundcube/source/browse/trunk/plugins/#plugins%2… [3] http://git.kolab.org/roundcubemail-plugins-kolab/tree/plugins

10 18

mailbox overstroomd
by t. lubben 20 Feb '13

20 Feb '13

allen, ik heb mijn mailbox overvol. nu kan ik ook niet meer opschonen. niets komt erin en niets kan er uit. wie weet hoe ik dit op moet lossen? vr gr erny

1 0

namespace prefix and special folders issue
by Gustavo Sansone 17 Feb '13

17 Feb '13

hello everyone, i'm new to this list i'm running dovecot as imap+pop (2.1.12) and roundcube (0.8.4) as client. and made a Courier migration following the dovecot wiki. file/folder structure is as follow: /home/user/.maildir/cur /home/user/.maildir/.Drafts /home/user/.maildir/.Junk /home/user/.maildir/.Sent /home/user/.maildir/.Trash /home/user/.maildir/.Archive /home/user/.maildir/.Archive.2012 etc... dovecot.conf configured with prefix = INBOX. on roundcube config have: $rcmail_config['default_imap_folders'] = array('INBOX', 'INBOX.Drafts', 'INBOX.Sent', 'INBOX.Junk', 'INBOX.Trash'); it seems to work fine with this configuration. but i understand that that 'INBOX.' prefix is not supposed to be there because of the file structure i have on the server. but, if i remove the INBOX. prefix from both configurations, then roundcube don't recognize special folders, and if i send a new mail, it creates a new folder INBOX.Sent on the file structure, and appears as a tree under INBOX on Roundcube GUI. then i have on my maildir structure two Sent folders: .maildir/INBOX.Sent .maildir/Sent and Roundcube recognize and subscribe to the new created folder as special Sent folder. i can't figure out why it behaves that way. any clue? thanks in advance

3 5

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users