- Users - Roundcube mailing lists

possible bug
by soumitri＠iitk.ac.in 21 Jul '16

21 Jul '16

Hello all, I am facing an issue in roundcube with following 2 setting enabled. --$config['display_next'] = false; -- The user use double click to read messages without preview pane. Now when he deletes a message, the message is moved to Trash , but the screen does not goes back to list of message, it is stuck at showing the deleted message along with status "Moving message" in grey. The user has to click on folder name to get the list of message. I can share imap debug log if required. Thanks for listening. Regards, -- Soumitri Mishra, IIT Kanpur

3 7

Inbox empty and sending not working - but no errors
by Eric Lanfer 20 Jul '16

20 Jul '16

Hey, yesterday i've installed a new mailserver instance on a debian8 machine (postfix, dovecot, nginx (with php5-fpm, mysql). I've also setup a roundcube 1.2, and here i got a problem, when i login into the mailbox in roundcube, the inbox folder is empty (others too) and when i'm trying to send an E-Mail from roundcube, the sending popup appears but no mail is going out and it hungs at this position... RC-Error Log is not showing any errors, roundcube smtp log is not going to be created (yes debug modus is set in config) and the /var/mail.log is only documenting the imap login: Jul 20 09:21:29 vc1 dovecot: imap-login: Login: user=<admin(a)vc1.brainfact.de>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=30866, secured Jul 20 09:21:29 vc1 dovecot: imap(admin(a)vc1.brainfact.de): Logged out in=70 out=695 There are also no errors in nginx or php5-log.... In Thunderbird the inbox mails are shown and sending also works fine. The RC installer can also send e-mails... (via localhost smtp and tls also) Do you have any advice how to solve or troubleshoot this problem? best regards Eric

1 0

Roundcube vs Postfix smtpd_delay_reject=no
by lukn 19 Jul '16

19 Jul '16

Hello Roundcube Users I have an installation of Roundcube 1.1.5 (Version 1.2 is not yet working for me due to plugin dependencies). I noticed that mail cannot be sent using SMTP auth if the MTA (Postfix 2.10.2) has smtpd_delay_reject disabled: http://www.postfix.org/postconf.5.html#smtpd_delay_reject Postfix' default setting is to have smtpd_delay_reject turned on. Changing nothing else but enabling smtpd_delay_reject Roundcube works flawlessly. But due to specific needs on this server I would like to leave smtpd_delay_reject disabled and have Roundcube cooperate with this setting. This is Roundcube's error message from my logs: roundcube: <vqg1ssqm> SMTP Error: Connection failed: Invalid response code received from server in /var/www/html/cmail/program/lib/Roundcube/rcube.php on line 1712 (POST /cmail/?_task=mail&_unlock=loading1468917789039&_lang=en_GB&_framed=1?_task=mail&_action=send) roundcube: ERROR: Invalid response code received from server (554) And this is what Postfix says: postfix/smtpd[28420]: connect from unknown[x.x.x.x] postfix/smtpd[28420]: NOQUEUE: reject: CONNECT from unknown[x.x.x.x]: 554 5.7.1 <unknown[x.x.x.x]>: Client host rejected: Access denied; proto=SMTP postfix/smtpd[28420]: lost connection after CONNECT from unknown[x.x.x.x] postfix/smtpd[28420]: disconnect from unknown[x.x.x.x] Here's a config snippet of Roundcube's SMTP settings: $config['smtp_server'] = 'tls://smtphost'; $config['smtp_port'] = 587; $config['smtp_user'] = '%u'; $config['smtp_pass'] = '%p'; Is there anything I can do on Roundcube config side? A magic Postfix trick? Thank you for any input! Best regards lukn

1 0

selecting messages
by mick crane 11 Jul '16

11 Jul '16

hello, If I select a bunch of messages by clicking on one then move mouse down then click another message holding alt+shift in firefox all messages between the 2 are selected. But I want to keep one so I click with mouse while holding alt+ctl and it looks like it is deselected but then if I then click delete all messages between the two first selected are deleted including one I deselected. mick -- key ID: 0x4BFEBB31

1 0

Confused about composer.php upgrade
by nerbrume＠free.fr 03 Jul '16

03 Jul '16

Hi, Apologies if this is not the right place to post, I tried the community forums first without any luck. I'm a bit confused about the usage of composer.php, especially the update/upgrade procedure. I just migrated to roundcube 1.2, and thought it would be a perfect time to upgrade my plugins as well. (as an example, I'll talk about the carddav plugin (https://plugins.roundcube.net/packages/roundcube/carddav), but I had the same issues with other plugins) Prior to upgrade, my composer.json contained this, in the "require" section: "roundcube/carddav": "dev-issue_129" First question is : should I have used master rather than the last "stable" tag (here, "dev-issue_129")? Isn't "master" reserved for usage with the currently in development branch of roundcube ? (I'm pretty sure that's the way Johndoh does it , having a "dev-master" tag ,and stable tags. See e.g. https://plugins.roundcube.net/packages/johndoh/contextmenu) After issuing : php composer.phar self-update php composer.phar update composer strangely asked if I wanted to activate the carddav plugin (it was already activated in my roundcube config). More importantly, the update deleted my plugin/carddav/config.inc.php. Is it supposed to do that ? Having to check and update config files by hand for each plugin seems a bit tedious for me... Last, about the overall composer.json file. After updating, I noticed a composer.json-dist file, presumably the new "base" version of composer.json. Am I supposed to merge any changes by hand into my composer.json file ? Otherwise, any other steps I might have missed ? Thanks for reading, hope I was clear enough !

1 0

CSV Kontakte Uploud
by Carsten Hegenberg - Hegenberg Trendcenter 23 Jun '16

23 Jun '16

Hallo! ich kann leider keine Kontakte als CSV hochladen, leider lediglich im Vcard Format einzeln - vielleicht kann mir jemand helfen - Danke! -- mit herzlichen Grüßen Carsten Hegenberg Hegenberg Trendcenter Esplanade 7-9 | 24534 Neumünster | Germany Tel: +49. 4321. 200 7 20 Fax: +49. 4321. 200 7 220 verkauf(a)hegenbergcenter.de / www.hegenbergcenter.de ________________________________________ Diese Nachricht und die darin enthaltenen Informationen können vertraulich oder ausschließlich für den Adressaten bestimmt sein. Wenn Sie nicht der bestimmungsgemäß Adressat sind und diese Nachricht versehentlich erhalten haben sollten, ist die Verwendung des Inhalts strengstens untersagt! Anderen als dem bestimmungsgemäß Adressaten ist es untersagt, diese E-Mail zu lesen, zu speichern, weiterzuleiten oder ihren Inhalt, auf welche Weise auch immer, zu verwenden. Bitte informieren Sie uns über die falsche Zustellung und löschen Sie diese E-Mail. Wir verwenden aktuelle Virenschutzprogramme. Für Schäden, die dem Empfänger gleichwohl durch von uns zugesandte, mit Viren befallene E-Mails entstehen, schließen wir jede Haftung aus.

1 0

Resized Firefow window but not "writing area"
by barul 23 Jun '16

23 Jun '16

Hello, I just noticed that when I resize my Firefox window (for example if I make it half the size of my screen vertically), not all the fields are resized. The one where you write the mail keeps its normal size, while all the others are of correct size. Is it Firefox that doesn't work as it should? Thanks -- barul

2 2

Frame with the messages is scrolled to the top on message list update
by Dmitry Katsubo 20 Jun '16

20 Jun '16

Hello everyone, On my main Roundcube window I have list of messages, 100 per page, grouped by thread. When I read the messages one by one (I use arrow down key) I go far beyond the initial visible portion of messages so the view is scrolled to certain row. Then the automatic update of messages happens. After that the view is scrolled to the top, and the selected message is not visible anymore (one needs to scroll down for a while). That is very annoying as it interrupts the reading. Could it be improved so that if message list is refreshed, the scrolling position is preserved? I would say the following logic should be applied: Restore the scroll offset. If the selected message is in a viewport, do nothing. Otherwise scroll the view so that the selected message appears at the top – this situation may happen if a bulk of messages top the top of selected one are deleted. It could be that the selected message is deleted but I think there could be a "best effort" option here as well. Roundcube v1.2.0 -- With best regards, Dmitry

1 0

Address book setup
by Dmitry Katsubo 16 Jun '16

16 Jun '16

Dear all, I am trying to setup LDAP address book in Roundcube, till now without any success. I think I have setup the LDAP address book correctly, but the moment I open it, it shows blank persons' cards. Unfortunately nothing is logged into /var/log/roundcube/error. What I did wrong? $rcmail_config['ldap_public']['public'] = array( 'name' => 'Public LDAP Addressbook', 'hosts' => array('localhost'), 'port' => 389, 'user_specific' => false, 'base_dn' => 'cn=persons,cn=corporate', 'scope' => 'one', 'filter' => '(objectClass=inetOrgPerson)', 'groups' => array( 'base_dn' => '', 'filter' => '(objectClass=groupOfNames)', 'object_classes' => array("top", "groupOfNames"), ), ); -- With best regards, Dmitry

2 2

Registration at the forum
by Dmitry Katsubo 09 Jun '16

09 Jun '16

Dear community, I have difficulties in registering at roundcube forum [1]. More concrete, I haven't received the confirmation email (I've checked spam folder). I have tried two different emails and it didn't work. Unfortunately I don't know how to contact the administrator of the forum. [1] http://roundcubeforum.net/ -- With best regards, Dmitry

1 0

How to configure roundcube to relay mail
by John Tucker 08 Jun '16

08 Jun '16

Greetings, I have read the wiki and understand how to set the relay host, user id and user password but I have a question on how to identify an alternate port to use for mail relay. I would add/update the following to the config/config.inc.php file $config['smtp_server'] = ‘my.host.com <http://my.host.com/>:10025’; $config[‘smtp_user’] = 'userid’; $config[‘smtp_pass’] = ‘password’; or is there another 'smtp_port’ parameter or such? Thanks for the help. jt

2 1

Enigma shows and uses stale/old keys
by Jari Fredriksson 31 May '16

31 May '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I updated my pgp keys and gpg -K and gpg2 -K do show the keys correctly. Enigma, however, does not see or use the updated things in my keys. Does it have some kind of a cache somewhere? I restarted apache2 but that is all I did, and that did not help... Any ideas? - -- jarif(a)iki.fi -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEARECAAYFAldMwTkACgkQKL4IzOyjSrbY+wCgpXoONG3xDEMWWTiNTVJOuswU FWQAniSEO7BebHMkz83sraVYCJMakHZu =tJqJ -----END PGP SIGNATURE-----

2 1

confused about PGP
by Andreas Meyer 27 May '16

27 May '16

Hello! Just upgraded to Version 1.2 because of the enigma-plugin. It's great Roundcube supports PGP now! I enabled the plugin and importet a public key. When I write a mail to the owner of that key, I choose "encrypt" and when I send it, Roundcube asks for the public key of the sender. Shouldn't it ask for the key of the recipient? Kind regards Andreas

2 2

RCU 1.2 & Enigma (s/mime)
by Jari Fredriksson 23 May '16

23 May '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Nice! But... My posts contain a signed plain message wrapped with pgp stuff. I would love to have the signature sent as an separate mime part. I can see that enigma supports this format, at least when reading a message from some other. How to enable that in roundcube/enigma? - -- jarif.bit -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEARECAAYFAldDQhsACgkQKL4IzOyjSrZGagCglkjnvecL0JaYmBFZPt8Jifv5 mFMAnA9OqrzJoqK3I2qMuMrmtXlpThWh =muLo -----END PGP SIGNATURE-----

2 2

Roundcube Webmail 1.2.0 released
by Thomas Bruederli 22 May '16

22 May '16

Dear subscribers Today we proudly announce the stable version 1.2.0 of Roundcube Webmail which is now available for download. It introduces new features since version 1.1 covering security and PGP encryption topics: - PHP7 compatibility - PGP encryption - Drag-n-drop attachments from mail preview to compose window - Mail messages searching with pre-defined date interval - Improved security measures to protect from brute-force attacks And of course plenty of small improvements and bug fixes. There wasn't much feedback on the 1.2-beta version and the release candidate which we consider a good sign. Some cleanup and stabilization of the Enigma plugin just happened for the now stable version. As already announced with the 1.2-beta release [1], PGP encryption comes in two flavors: client-side using the Mailvelope browser extension and server-side with the Enigma plugin using GnuPG on the server. Support with the Mailvelope browser plugin comes out of the box and is automatically enabled if the Mailvelope API is detected in a user’s browser. The Mailvelope documentation [2] explains how to enable it for your site. The features of the Enigma plugin, which comes with the release package and simply needs to be activated for your Roundcube installation are explained in Alec's blog post [3]. With the release of Roundcube 1.2.0, the previous stable release branches 1.0.x and 1.1.x will switch in to LTS low maintenance mode which means they will only receive important security updates but no longer any regular improvements from upstream. See the complete Changelog in our wiki [4] and download the new packages from https://roundcube.net/download. Roundcube 1.2.0 is considered stable and we recommend to update all productive installations of Roundcube. As usual, don’t forget to backup your data before updating ;-) Best, Thomas [1] https://roundcube.net/news/2015/11/23/roundcube-webmail-1.2-beta-out-now [2] https://www.mailvelope.com/en/help#watchlist [3] https://kolabian.wordpress.com/2015/10/13/enigma-plugin-pgp-encryption/ [4] https://github.com/roundcube/roundcubemail/wiki/Changelog

1 0

signature
by Luciano Gabriel Andino 08 May '16

08 May '16

Hello, I'm looking the way to access all user signatures and modify them (telephone number, etc). Is there any way? I can access to DB but need to look how they look in HTML view. thanks in advance, -- Saludos!! Luciano Andino GNU/Linux user #185103 Santa Fe - Argentina -----------------------------------------------

1 0

Limit number of attachments
by Sam 28 Apr '16

28 Apr '16

Hello, I've set up roundcube and everything is ok except one thing that I can't find how to tune : When sending email, users can upload a lot of files if each file is under the : - upload_max_filesize - post_max_size before sending the email (wich one will be reject by exim size rules). But someone can fill up the upload temp file with just sending upload files. Did I missed something or is there anything to do to limit the number of attachment that a user can send ? Thanks a lot. Samuel.

2 2

session data stored in memcache is not in plain-text?
by Alex Mihičinac 27 Apr '16

27 Apr '16

Hi all, I have a question about sessions stored in memcache. It seems that if I switch session store to memache, all the session data looks like binary data. This is an example: ------------------------------------ get 9c5h585db64sqiubm5h9k1ioi1 VALUE 9c5h585db64sqiubm5h9k1ioi1 2 808 x�uTMS�0�+��R&A>��b2C{[qTd�H2��d;��j�v��%8�oO0*vDT�D �~4�'q<�D�#� 8�p�F��(�k�0z&J��0�1�Ғ .... END ------------------------------------ Is this expected behavior? I'd expect something like this: ------------------------------------ get qvildov82ptrfv0d6jsgo9h6h2 VALUE qvildov82ptrfv0d6jsgo9h6h2 0 167 a:3:{s:7:"changed";i:1461755585;s:2:"ip";s:14:"<anonymized>";s:4:"vars";s:84:"temp|b:1;language|s:5:"sl_SI";request_token|s:32:"<anonymized>";";} END ------------------------------------ Any hint more than welcome. Best regards, Alex

2 3

roubecube-1.1.4 - use sender identify based on "To" field
by Robert Söderlund 26 Apr '16

26 Apr '16

Hi all! Is it possible to configure roundcube to use the address in "To" or "Delivered-To" headers without setting up a new identity when I reply or forward mails. The important (at least of what I think ;) part of the configuration is: $config['plugins'] = array('identity_select',...) $config['identity_select_headers'] = array('Delivered-To','To'); $config['identities_level'] = 0; //Robert -- Robert Söderlund

2 2

auto folder activation
by joao＠7lan.net 21 Apr '16

21 Apr '16

I've found some information about this but only with known folders. I would like to know how to automatically activate dinamically created folders in my roundcube. I have some sieve rules that dinamically creates folders based in discussion lists, dates and etc... how to make roundcube show them automatically when new folder are created? Thanks!

1 0

Published Updates 1.1.5 and 1.0.9
by Thomas Bruederli 20 Apr '16

20 Apr '16

Dear subscribers We just published updates to both stable versions 1.0 and 1.1 delivering important bug fixes and helps protecting Roundcube against more XSS and CSRF attacks. Version 1.1.5 also has two new plugin hooks integrated and version 1.0.9 comes with cherry-picked fixes from the more recent version to ensure proper long term support. See the full changelog in the wiki [1] and the selection for 1.0.9 on the release page [2]. Both versions are considered stable and we recommend to update all productive installations of Roundcube with either one of these versions. Download them from GitHub via https://roundcube.net/download. As usual, don’t forget to backup your data before updating! Best, Thomas [1] https://github.com/roundcube/roundcubemail/wiki/Changelog#release-115 [2] https://github.com/roundcube/roundcubemail/releases/tag/1.0.9

2 1

Release candidate for 1.2 out now
by Thomas Bruederli 13 Apr '16

13 Apr '16

Hello folks Roundcube 1.2 is pretty much complete and after adding some last-minute improvements we just published a release candidate to give it another round of testing before we slap the 'stable' tag on it. We hereby invite you all to test the release candidate and report remaining bugs to our issue tracker. The most important features we added in 1.2 are: * PHP7 compatibility * PGP encryption in two flavours * Improved security measures to protect from brute-force and CSRF attacks See the full Changelog in our wiki: https://github.com/roundcube/roundcubemail/wiki/Changelog Download the packages or the signed source directly from Github: https://github.com/roundcube/roundcubemail/releases/tag/1.2-rc Please note that we recommend to test it on a separate environment. And don't forget to backup your data before installing it. Another note: with the upcoming stable release of 1.2.0 the old 1.0.x and the 1.1.x series will only receive important security fixes. Updates to these two branches are to be released soon. So stay tuned! Best, Thomas

1 0

problem subject
by Svilen Arsov 13 Apr '16

13 Apr '16

Hi, sory for my mistake in first letter. (roundcube 2.1 beta) ... I have another problem with roundcube 1.2 beta When I send e-mails from roundcube to rouncube there is "no subject". This problem doesn't exist when sending e-mails to other mails, e.g gmail and etc. Can you help me with this? P.S. I have already upgraded roundcube to 1.2 beta version, installed lot of plug-ins and don't want to get back to the stable version 1.4.4 due to this bug. Below you can find a screen shot with the installed plug-ins, marked in red. http://pcexpert.bg/screenshot.rar [1] Kind Regards eng. Svilen Arsov Links: ------ [1] http://pcexpert.bg/screenshot.rar

2 4

problem subject
by Svilen Arsov 13 Apr '16

13 Apr '16

Hi, I have another problem with roundcube 2.1 beta When I send e-mails from roundcube to rouncube there is no subject. This problem doesn't exist when sending e-mails to other mails, e.g gmail and etc. Can you help me with this? P.S. I have already upgraded roundcube to 2.1 beta version, installed lot of plug-ins and don't want to get back to the stable version 1.4 due to this bug. Below you can find a screen shot with the installed plug-ins, marked in red. http://pcexpert.bg/screenshot.rar [1] Kind Regards eng. Svilen Arsov Links: ------ [1] http://pcexpert.bg/screenshot.rar

1 0

Problem roundcube virtual network eth0:0
by Svilen Arsov 11 Apr '16

11 Apr '16

Hello, I have a problem with round cube and my network. I have 3 ips and the OS is Linux Debian: - eth0 - 46.55.253.244 - Ethernet - eth0:0 - 46.55.253.245- Ethernet (Virtual) - eth0:1 - 46.55.253.246- Ethernet (Virtual) When adding the virtual networks round cube is connecting and sending e-mails from x.x.x.245. Pls see the following log: Apr 10 11:12:05 ns1 dovecot: imap-login: Login: user=<office(a)pcexpert.bg>, method=PLAIN, rip=46.55.253.245, lip=46.55.253.244, mpid=11257, session=<9wjJ+xww5gAuN/31> When the virtual networks are down, then roundcube works fine: Apr 10 11:32:05 ns1 dovecot: imap-login: Login: user=<office(a)pcexpert.bg>, method=PLAIN, rip=46.55.253.244, lip=46.55.253.244, mpid=11257, session=<9wjJ+xww5gAuN/31> In config.ins.php the code is: $config['default_host'] = 'pcexpert.bg'; When the code changes to $config['default_host'] = 'localhost' , roundcube is connecting 127.0.0.1, but sending e-mails from 46.55.253.245 Log: Apr 10 11:32:05 ns1 dovecot: imap-login: Login: user=<office(a)pcexpert.bg>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=11257, session=<9wjJ+xww5gAuN/31> Pls advise, how can roundcube connect and send e-mails to the real ip 46.55.253.244, when having vitual networks. Best Regards, Svilen

3 4

default config
by Benny Pedersen 31 Mar '16

31 Mar '16

found that spell check is default enabled to another host outside of localhost, it should imho not be default enabled but keeped as a example to setup spell check with all that problems i have with rc 1.1 i consider drop roundcube :/ -- Benny Pedersen

1 0

roundcube next
by Bob Miller 28 Mar '16

28 Mar '16

Hello, I was recently telling a client of mine that I would be updating roundcube in the not-too-long-term future with roundcube next, which prompted me to remember that I haven't heard any activity from that corner of the world recently. So I went to check the portal, but I get a 503 error. Did I miss some something somewhere and things moved without me? Maybe I am finally so much the nerd that the cool kids all went somewhere else without telling me :D -- Bob Miller Computerisms 867-334-7117 / 867-633-3760 http://www.computerisms.ca

3 4

convert rcu mysql config to sqlite3
by Benny Pedersen 27 Mar '16

27 Mar '16

but how to make this simply ? googled a bit of that and found https://gist.github.com/esperlu/943776 is it safe to use it with roundcube ?

1 0

Problem adding a plugin
by GDR! 23 Mar '16

23 Mar '16

Hi, I've tried to add a plugin to https://plugins.roundcube.net/packages/submit but without much luck: when I paste the repo: https://github.com/gjedeer/roundcube-postfix-virtual-user-mapping.git I'm getting: No valid/supported repository was found at the given URL The error makes it sound like it's a problem with the submission process that you guys need to fix. Or, if it's a problem with my repo, maybe you have some suggestions what's wrong. By the way, I tried to register on a forum to get support for this, but: The user gdr with Email [....] (IP [......].21) is a Spam, please contact forum administrator. Catch 22, because forum admin's email is not published...

1 0

Trac platform migrated to Github
by Thomas Bruederli 20 Mar '16

20 Mar '16

Dear subscribers After many ups and downs with our Trac platform which hosted our wiki and the ticket system for years now, we finally migrated the data over to Github where we already host the git repositories. Therefore, on March 25th 2016 the trac.roundcube.net site will be shut down Starting today, the site is in read-only mode meaning that user logins and ticket reporting have been disabled already. This means that submitting new tickets now goes through Github and so does the roadmap planning and overview. The entry point for that is our Github project page at https://github.com/roundcube/roundcubemail Today we just migrated 4.8K tickets from the Trac database to Github issues [1], leaving the invalid and duplicate ones behind. Unfortunately the ticket numbers could not be kept and have all been re-assigned. The original trac ticket numbers are mentioned in the migrated issue body and can be used for searching. We'll also install a redirect service which will translate old Trac urls to the corresponding issue pages. The wiki will also be translated into Github markdown pages. There's some manual reviewing involved in order to update or remove outdated information during this process. Please give us some more days to complete that task. Thank you for your understanding and see you on Github Best, Thomas [1] https://github.com/roundcube/roundcubemail/issues

1 0

How disable version displaying in Roundcube (1.1.4)?
by sws001 14 Mar '16

14 Mar '16

Hello. I use the 1.1.4 Roundcube version. On the front page there is the "About program" button. I don't want to publish this information for all. How can I disable this options? Regards Slawomir Mrok

2 1

Error "Invalid request! No data was saved."
by Niklaas Baudet von Gersdorff 08 Mar '16

08 Mar '16

Hi, I've been struggling with the following error for quite some time: > Invalid request! No data was saved. I get this error message every time I try to log into a account. I already tried deleting the browser cache and the sessions stored in the database but no success. This is the system roundcube is running on: > $ uname -a > FreeBSD webmail.<server> 10.1-RELEASE-p19 FreeBSD 10.1-RELEASE-p19 #0: Sat Aug 22 03:55:09 UTC 2015 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 > $ pkg info roundcube > roundcube-1.1.0,1 > Name : roundcube > Version : 1.1.0,1 > Installed on : Mon Sep 14 10:01:13 CEST 2015 > Origin : mail/roundcube > Architecture : freebsd:10:x86:64 > $ pkg info | grep "^php" > php56-5.6.6 PHP Scripting Language > php56-dom-5.6.6 The dom shared extension for php > php56-filter-5.6.6 The filter shared extension for php > php56-iconv-5.6.6 The iconv shared extension for php > php56-json-5.6.6 The json shared extension for php > php56-mbstring-5.6.6 The mbstring shared extension for php > php56-mysql-5.6.6 The mysql shared extension for php > php56-pdo-5.6.6 The pdo shared extension for php > php56-pdo_mysql-5.6.6 The pdo_mysql shared extension for php > php56-session-5.6.6 The session shared extension for php > php56-xml-5.6.6 The xml shared extension for php > php56-zip-5.6.6 The zip shared extension for php > $ grep "14/Sep" /var/log/httpd-access.log > 127.0.2.2 - - [14/Sep/2015:10:11:35 +0200] "GET / HTTP/1.1" 200 5800 > 127.0.2.2 - - [14/Sep/2015:10:11:35 +0200] "GET /skins/larry/styles.min.css?s=1423403009 HTTP/1.1" 200 52972 > 127.0.2.2 - - [14/Sep/2015:10:11:35 +0200] "GET /program/js/jstz.min.js?s=1423403008 HTTP/1.1" 200 6927 > 127.0.2.2 - - [14/Sep/2015:10:11:35 +0200] "GET /program/js/common.min.js?s=1423403008 HTTP/1.1" 200 13884 > 127.0.2.2 - - [14/Sep/2015:10:11:35 +0200] "GET /program/js/jquery.min.js?s=1423403008 HTTP/1.1" 200 85683 > 127.0.2.2 - - [14/Sep/2015:10:11:35 +0200] "GET /skins/larry/ui.min.js?s=1423403009 HTTP/1.1" 200 25603 > 127.0.2.2 - - [14/Sep/2015:10:11:35 +0200] "GET /program/js/app.min.js?s=1423403008 HTTP/1.1" 200 141002 > 127.0.2.2 - - [14/Sep/2015:10:11:35 +0200] "GET /plugins/jqueryui/themes/larry/jquery-ui-1.10.4.custom.css?s=1423403008 HTTP/1.1" 200 43661 > 127.0.2.2 - - [14/Sep/2015:10:11:36 +0200] "GET /skins/larry/images/selector.png HTTP/1.1" 200 181 > 127.0.2.2 - - [14/Sep/2015:10:11:36 +0200] "GET /skins/larry/images/splitter.png HTTP/1.1" 200 136 > 127.0.2.2 - - [14/Sep/2015:10:11:36 +0200] "GET /skins/larry/images/watermark.jpg HTTP/1.1" 200 5000 > 127.0.2.2 - - [14/Sep/2015:10:11:42 +0200] "GET /skins/larry/images/ajaxloader.gif?v=c252.1434 HTTP/1.1" 200 1434 > 127.0.2.2 - - [14/Sep/2015:10:11:42 +0200] "POST /?_task=login HTTP/1.1" 200 5923 > 127.0.2.2 - - [14/Sep/2015:10:11:42 +0200] "GET /skins/larry/styles.min.css?s=1423403009 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:11:42 +0200] "GET /plugins/jqueryui/themes/larry/jquery-ui-1.10.4.custom.css?s=1423403008 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:11:42 +0200] "GET /program/js/jquery.min.js?s=1423403008 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:11:42 +0200] "GET /program/js/app.min.js?s=1423403008 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:11:42 +0200] "GET /skins/larry/ui.min.js?s=1423403009 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:11:42 +0200] "GET /program/js/jstz.min.js?s=1423403008 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:11:42 +0200] "GET /plugins/jqueryui/js/jquery-ui-1.10.4.custom.min.js?s=1423403008 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:11:42 +0200] "GET /program/js/common.min.js?s=1423403008 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:11:42 +0200] "GET /skins/larry/images/messages.png?v=3a4f.1461 HTTP/1.1" 200 1461 > 127.0.2.4 - - [14/Sep/2015:10:11:49 +0200] "OPTIONS * HTTP/1.0" 200 - > 127.0.2.4 - - [14/Sep/2015:10:11:50 +0200] "OPTIONS * HTTP/1.0" 200 - > 127.0.2.4 - - [14/Sep/2015:10:11:51 +0200] "OPTIONS * HTTP/1.0" 200 - > 127.0.2.4 - - [14/Sep/2015:10:11:52 +0200] "OPTIONS * HTTP/1.0" 200 - > 127.0.2.4 - - [14/Sep/2015:10:11:53 +0200] "OPTIONS * HTTP/1.0" 200 - > 127.0.2.2 - - [14/Sep/2015:10:13:01 +0200] "GET /skins/larry/images/ajaxloader.gif?v=c252.1434 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:13:01 +0200] "POST /?_task=login HTTP/1.1" 200 5923 > 127.0.2.2 - - [14/Sep/2015:10:13:01 +0200] "GET /skins/larry/styles.min.css?s=1423403009 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:13:01 +0200] "GET /plugins/jqueryui/themes/larry/jquery-ui-1.10.4.custom.css?s=1423403008 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:13:01 +0200] "GET /skins/larry/ui.min.js?s=1423403009 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:13:01 +0200] "GET /program/js/jquery.min.js?s=1423403008 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:13:01 +0200] "GET /program/js/common.min.js?s=1423403008 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:13:01 +0200] "GET /program/js/app.min.js?s=1423403008 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:13:01 +0200] "GET /program/js/jstz.min.js?s=1423403008 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:13:01 +0200] "GET /plugins/jqueryui/js/jquery-ui-1.10.4.custom.min.js?s=1423403008 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:14:05 +0200] "GET /skins/larry/images/ajaxloader.gif?v=c252.1434 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:14:05 +0200] "POST /?_task=login HTTP/1.1" 200 5923 > 127.0.2.2 - - [14/Sep/2015:10:14:05 +0200] "GET /skins/larry/styles.min.css?s=1423403009 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:14:05 +0200] "GET /plugins/jqueryui/themes/larry/jquery-ui-1.10.4.custom.css?s=1423403008 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:14:05 +0200] "GET /skins/larry/ui.min.js?s=1423403009 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:14:05 +0200] "GET /program/js/jquery.min.js?s=1423403008 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:14:05 +0200] "GET /program/js/common.min.js?s=1423403008 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:14:05 +0200] "GET /program/js/app.min.js?s=1423403008 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:14:05 +0200] "GET /program/js/jstz.min.js?s=1423403008 HTTP/1.1" 304 - > 127.0.2.2 - - [14/Sep/2015:10:14:05 +0200] "GET /plugins/jqueryui/js/jquery-ui-1.10.4.custom.min.js?s=1423403008 HTTP/1.1" 304 - Not httpd errors. An internet search query didn't resolve any suggestions where to go to further debug the problem. What can cause such an error? Any help is very much appreciated. Best, -- Niklaas

4 8

Enigma Plugin: FILE NOT FOUND
by Marcus Schopen 08 Mar '16

08 Mar '16

Hi, using rouncube 1.1.4 on Ubuntu 14.04 LTS and tried to enable enigma plugin, which come with the "Complete" download from roundcube.net, but get these errors on "Settings/Preferences/S/MIME Certificates or PGP Keys": FILE NOT FOUND The requested resource was not found! Please contact your server-administrator. Failed request: //www.domain.com/roundcube/?_task=settings&_action=edit-prefs&_section=enigmakeys&_framed=1 Failed request: //www.domain.com/roundcube/?_task=settings&_action=edit-prefs&_section=enigmacerts&_framed=1 logs/errors: ---------- [08-Mar-2016 10:50:57 +0100]: <127n6t1l> PHP Error: Error loading template for enigma.keys in /var/www/html/roundcube/program/include/rcmail_output_html.php on line 600 (GET /roundcube/?_task=settings&_action=edit-prefs&_section=enigmakeys&_framed=1) [08-Mar-2016 10:50:58 +0100]: <127n6t1l> PHP Error: Error loading template for enigma.certs in /var/www/html/roundcube/program/include/rcmail_output_html.php on line 600 (GET /roundcube/?_task=settings&_action=edit-prefs&_section=enigmacerts&_framed=1) ---------- For testing I've downloaded the newest Zip from github and replaced plugins/enigma but then I get this error: ---------- [07-Mar-2016 16:52:39 Europe/Berlin] PHP Warning: require_once(Crypt/GPG.php): failed to open stream: No such file or directory in /var/www/html/roundcube/plugins/enigma/lib/enigma_driver_gnupg.php on line 18 [07-Mar-2016 16:52:39 Europe/Berlin] PHP Fatal error: require_once(): Failed opening required 'Crypt/GPG.php' (include_path='/var/www/html/roundcube/plugins/enigma/lib:/var/www/html/roundcube/vendor/pear-pear.php.net/Auth_SASL:/var/www/html/roundcube/vendor/pear-pear.php.net/Net_IDNA2:/var/www/html/roundcube/vendor/pear-pear.php.net/Console_Getopt:/var/www/html/roundcube/vendor/pear-pear.php.net/Archive_Tar:/var/www/html/roundcube/vendor/pear-pear.php.net/Structures_Graph:/var/www/html/roundcube/vendor/pear-pear.php.net/XML_Util:/var/www/html/roundcube/vendor/pear-pear.php.net/PEAR:/var/www/html/roundcube/vendor/pear-pear.php.net/Net_Socket:/var/www/html/roundcube/vendor/pear-pear.php.net/Net_Sieve:/var/www/html/roundcube/vendor/pear-pear.php.net/Net_SMTP:/var/www/html/roundcube/vendor/pear-pear.php.net/Net_LDAP2:/var/www/html/roundcube/vendor/pear-pear.php.net/Mail_Mime:/var/www/html/roundcube/program/lib:.:/usr/share/php:/usr/share/pear') in /var/www/html/roundcube/plugins/enigma/lib/enigma_driver_gnupg.php on line 18 ----------- Is "Crypt/GPG.php" a missing php debian package I forgot to install or where does "Crypt/GPG.php" come from? dpkg -l | grep gnupg ii gnupg 1.4.16-1ubuntu2.3 Ciao Marcus

2 3

How to report bug if trac is closed?
by Stanislav Humplík - Analogic s.r.o. 29 Feb '16

29 Feb '16

Hello, I've found bug which prevents using passwords longer than 27 characters (other imap clients works ok). I want send bug report somewhere but trac says "Notice: Account registration is currently disabled. Please read our news for further updates." What to do now? Thanks, SH

2 1

default filter in msg list
by Benny Pedersen 27 Jan '16

27 Jan '16

is not persistense after upgrade from 1.0.x to 1.1.x, so it now shows list of readed mails and unreaded, in 1.0.x it was only unreaded using chrome v47

2 1

default plugins
by Benny Pedersen 27 Jan '16

27 Jan '16

archive 2.3 GPLv3+ filesystem_attachments 1.0 GPLv3+ jqueryui 1.10.4 GPLv3+ managesieve 8.3 GPLv3+ markasjunk 1.2 GPLv3+ password 3.5 GPLv3+ show_additional_headers 2.0 GPLv3+ after upgrade from 1.0.x to 1.1.x i see filesystem_attachments is default loaded, even in my config.inc.php is not defined as wanted to be loaded, is plugins now not optional ?

2 1

Filters plugin
by absolutely_free＠libero.it 26 Jan '16

26 Jan '16

Hi,I am using RC 1.1.4I have a strange problem with one of my users.Every mail from specific domain goes to Junk folder.This user has no filter at all in his configuration.I verified that no other devices are accessing this account (smartphone, workstation) (I was wondering about some client level rules)How can I troubleshooting this?

1 0

Issues trying to use http://lists.roundcube.net/mailman/options/users
by Kaz Kylheku 21 Jan '16

21 Jan '16

Hi, I'm trying to change my subscription options. I can log in. However, if I try to change anything or unsubscribe, I get a "403 Forbidden" error page which says "You don't have permission to access /mailman/options/users/kaz(a)kylheku.com on this server." To get out of this state, I have to manually remove the lists.roundcube.net session cookie. Also, I noticed something else: if I switch to HTTPS, I get some outdated redirect. That is to say: https://lists.roundcube.net/mailman/options/users redirects to https://issues.kolab.org/mailman/options/users which doesn't exist.

1 0

use_https issue
by Brendan Kearney 18 Jan '16

18 Jan '16

i have 2 apache instances behind HAProxy, where HAProxy is running the HTTPS and load balancing to RCM in the clear. i have set the 'use_https' option to true, and it works in most cases. i have found an exception and i wanted to see if this has been fixed in more recent versions. if i browse to https://host.domain.tld/roundcubemail (note https, with no trailing slash), i am redirected to http://host.domain.tld/roundcubemail/ (note not https, with trailing slash). if i correct the http:// to https:// everything works and all pages are secured. it seems that only the redirect to the URI with the trailing slash is where this comes up. i am running RCM 1.1.1-2 on fedora20. i will be upgrading in the near future, but wanted to see if this was already fixed. thank you, brendan

7 6

Adding a side-panel to the login screen
by L Butler 16 Jan '16

16 Jan '16

I’d like to add a side panel to the login screen to put short notes and links to support documents, but I am not sure how to do it without messing up the login page. Can I make changes to skins/larry/templates/login.html without breaking things? Will the changes get overwritten when updates are applied? Well, I *did* make changes to the login.html page, but I am pretty sure they are going to be overwritten Basically I added a float: right div with some individual divs inside to hold each item I wanted to add, but I am reasonably sure that if I update Roundcude, that file is going to be overwritten if there are any changes to it (and maybe even if there aren’t), so is there an approved method? -- ɹןʇnqן 303.219.0564

2 1

REQUEST CHECK FAILED on logout
by Gene 13 Jan '16

13 Jan '16

Hi - I'm using Roundcube 1.1.4 with php 5.6. Everthing works just fine until I go to logout. Then I get: REQUEST CHECK FAILED From the error log: [13-Jan-2016 13:19:52 -0600]: <2418512a> PHP Error: Request security check failed (GET /directory/?_task=logout&_token=VheqxvML-YE%+YZ1zUfjI&*w7BCy0A$D) [Directory name changed] Googling and list searches shows this error showing up under unrelated circumstances... nothing related to 'Logout'. Any idea what's going on? Thanks for any help, Gene

3 3

LOGIN failed
by Nulik Nol 11 Jan '16

11 Jan '16

Hi, I just installed roundcube, but I cant log in, says 'Login failed", but that is not true. I checked the session with tcpdump and I get past the authentication: root@dev1 ~]# tcpdump -n -ienp5s2 -x -w - port 556|strings tcpdump: listening on enp5s2, link-type EN10MB (Ethernet), capture size 262144 bytes XPla 2Pla XPla * OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION STARTTLS] Courier-IMAP ready. Copyright 1998-2008 Double Precision, Inc. See COPYING for distribution information. 2Plb 2Plb A0001 LOGIN XXXX YYYYYYYY XPlb XPlb _"A0001 OK LOGIN Ok. OPlb `A0002 NAMESPACE XPlb * NAMESPACE (("INBOX." ".")) NIL (("#shared." ".")("shared." ".")) A0002 OK NAMESPACE completed. `Plbz `Plbz A0003 LOGOUT XPlbz ` * BYE Courier-IMAP server shutting down A0003 OK LOGOUT completed nPlb nPlb (my real user/password data was changed, and my imap sits on 556 port to hide it from scanning) What could be the problem here? Which line of source code does this decision to logout? (so I can debug) I can perfectly read email with Evolution or SquirrelMail on this IMAP server. TIA Nulik

3 3

1.2 beta not decrypting emails
by Krystian 11 Jan '16

11 Jan '16

*Hi, I set up 1.2I got server side optionI can send crypted message to gmail and chrome plugin decrypts its fine.But when send from chrome to server it gets code and theres no option to decrypt**1* *I got it on auto decrypt but still no go* *Server side decrypt not working?it should decrypt automaticaly?I just get coded message have to use Mailvelope to decrypt itwhats I am missing ?* <?php > > // Enigma Plugin options > // -------------------- > > // A driver to use for PGP. Default: "gnupg". > $config['enigma_pgp_driver'] = 'gnupg'; > > // A driver to use for S/MIME. Default: "phpssl". > $config['enigma_smime_driver'] = 'phpssl'; > > // Keys directory for all users. Default 'enigma/home'. > // Must be writeable by PHP process > $config['enigma_pgp_homedir'] = null; > > // Enables signatures verification feature. > $config['enigma_signatures'] = true; > > // Enables messages decryption feature. > $config['enigma_decryption'] = true; > > // Enables messages encryption and signing feature. > $config['enigma_encryption'] = true; > > // Enable signing all messages by default > $config['enigma_sign_all'] = true; > > // Enable encrypting all messages by default > $config['enigma_encrypt_all'] = true; > > // Default for how long to store private key passwords (in minutes). > // When set to 0 passwords will be stored for the whole session. > $config['enigma_password_time'] = 0; > > // Enables server-side keys generation which would be used > // if user browser does not support web-crypto features. > // > // WARNING: Key generation requires true random numbers, and as such can be > // slow. If the operating system runs out of entropy, key generation will > // block until more entropy is available. > // > // To solve that a hardware entropy generator or > // an entropy gathering daemon may be installed (e.g. randomsound). > >

3 3

1.2 beta not decrypting emails
by Krystian 11 Jan '16

11 Jan '16

Is it decrypts for you ? I got server side option I can send crypted message to gmail and chrome plugin decrypts its fine. But when send from chrome to server it gets code and theres no option to decrypt 1I got it on auto decrypt but still no go Server side decrypt not working? it should decrypt automaticaly? I just get coded message have to use Mailvelope to decrypt it whats I am missing ?

1 0

Font Query
by Emma Mulkearns 11 Jan '16

11 Jan '16

Hi, I use round cube for business emails and need to change the default font as everything sent comes up like this attachment which isn't the same image as my brand needs. Am I able to permanent change the font to Arial? Emma w: www.gmssilver.com | i: @gmssilver | f: facebook.com/gmssilver

1 0

replication problems with database_attachments plugin
by Micah Anderson 05 Jan '16

05 Jan '16

Hi, I've got the database_attachments plugin enabled because I have multiple machines with a memcached session store. It seems to work fairly well... except that I am replicating the database to a read-only slave for redundancy (and read-balancing) and the replication keeps breaking. The slave will get this error: Could not execute Delete_rows event on table roundcube.cache; Can't find record in 'cache', Error_code: 1032; handler error HA_ERR_KEY_NOT_FOUND; the event's master log mysql-bin.000151, end_log_pos 182376 I've got a db_dnsw and db_dnsr configured in my roundcube config, could it be that roundcube is also writing to the db_dnsr causing entries to be removed on the slave, and then when the replication happens it fails because it has been removed on the slave already? I tried to look at mysql-bin.000151 for the 182376 event, but couldn't find it. Ideally, I wouldn't even replicate the roundcube.cache table, because its a *lot* of data, but if I dont replicate it, I suspect the db_dnsr would fail to find the records? thanks for any suggestions for things to check, micah

3 5

S/MIME done!
by Владимир Горпенко 02 Jan '16

02 Jan '16

Hi I know about development list. I have subscribed to this list a few weeks ago. It looks completely dead. When I needed information about developing, I tried to ask a question on that list. There was no answer. I have written here for information only, as I hope, that this information may be interesting. Regarding the creation of a separate branch of RC, that's impossible. I have a lot of work, and I can not carry the whole project. I was engaged in this task for two or three months only because it was necessary for my work. I think there are three more options. 1. Simple and realistic. Developers RC found my fix unacceptable. RC will be developed according to their plans, my problem is solved. All the rest are waiting for Enigma or other plugin. 2. Practical, but ugly. Developers agree with my patch, I bring plugins to the minimum complete form and put them in any repo. 3. Fantastic. Somebody takes the trouble to explain me how to do everything without my corrections. Perhaps we find a better way to solve the problem. I rework my plugins, and put them in a repo. Maybe someone who is engaged in the solution of this problem, wants to take advantage of my results. I am ready to help. Maybe someone needed S/MIME encryption so that he wants to use my design in the form in which it exist. I am ready to help. Best regards, Vladimir Gorpenko

2 1

S/MIME done!
by Владимир Горпенко 02 Jan '16

02 Jan '16

Hi! So, I did it! Before the end of the year, as promised. S/MIME encryption, decryption, signing and signature verification works. Of course, this is not the final version. )) 3 modules of RC were changed. I had to add some new hooks and use one deprecated hook. I made a separate plugin to work with certificates and keys. Now I have a very simple plugin that uses files to store keys and certificates. I hope that the developers of the RC show interest in my work. I am also ready to transfer texts and discuss the work done. If this work is interesting only for me, this letter - the last one I'm posting here. Sorry to trouble you, Vladimir Gorpenko

4 4

Re: [RCU] S/MIME done!
by Владимир Горпенко 30 Dec '15

30 Dec '15

Hi Alberto! I will clarify my answer, sent to you by email. My solution is not embeded into the text of RC. It consists of two plugins: one for message processing and another for certificates management. However, I've added 3 new hooks, fixed one obvious mistake in the RC text and made one patch that requires discussion. Without the participation of the team RC, these changes will not be made to the RC. Therefore, at this stage is useless to publish my plugins. They simply can not be used. Best regards, Vladimir Gorpenko

1 0

Fwd: [dev] Do we really want PHP 7 in Mageia 6?
by Thomas Spuhler 30 Dec '15

30 Dec '15

---------- Forwarded Message ---------- Subject: [dev] Do we really want PHP 7 in Mageia 6? Date: Monday, December 28, 2015, 05:32:19 PM From: Pascal Terjan <pterjan(a)gmail.com> To: dev(a)ml.mageia.org <dev(a)ml.mageia.org> SWIG does not support PHP7 and will probably not anytime soon as the API has changed a lot [1] and the main person working on PHP support in SWIG does not have time for it [2]. So we probably have 3 solutions: - Go back to php5 - Disable php support in most packages - Support 2 versions [1] https://wiki.php.net/phpng-upgrading [2] https://github.com/swig/swig/issues/571 ----------------------------------------- Timotheus: See the e-mail above. The discussion is right now going into the direction of going back to PHP-5.6 for our next release. This would enable libkolab and libkolabxml to build again. -- Best Regards Thomas Spuhler

1 0

PHP requirements
by Maurice de Laat 27 Dec '15

27 Dec '15

Hi, Can someone explain me what the PHP requirements are for roundcube. On the hompage it says "PHP Version 5.3.7 or greater", but on the wiki it says "PHP version 5.2.1 or greater"? I have roundcube 1.0.2 running on php 5.3.3, and would like to know if I can install updates or not. Thank you! Maurice

2 2

Security Updates 1.1.4 and 1.0.8 released
by Thomas Bruederli 26 Dec '15

26 Dec '15

Dear Roundcube users We just published updates to both stable versions 1.0 and 1.1 delivering important bug fixes one of which seals a potential path traversal vulnerability [1] recently reported by High-Tech Bridge Security Research Lab. Although the vulnerability is not fully disclosed yet, the attack scenario requires an active Roundcube account as well as write privileges on the same host Roundcube is served from (without open_basedir protection). A second security improvement adds some measures against brute-force attacks. See the full changelog here: http://trac.roundcube.net/wiki/Changelog#RELEASE1.1.4 Both versions are considered stable and we recommend to update all productive installations of Roundcube with either of these versions. Download them from https://roundcube.net/download If you prefer to patch your installation for the path traversal vulnerability only, we also published patches on our download mirrors for versions 1.0 [2] and 1.1 [3]. As usual, don't forget to backup your data before updating! Thanks for all your support and happy new year! Thomas [1] https://www.htbridge.com/advisory/HTB23283 [2] https://sourceforge.net/projects/roundcubemail/files/roundcubemail/1.0.8/ [3] https://sourceforge.net/projects/roundcubemail/files/roundcubemail/1.1.4/

1 0

Changing columns and order in $config['list_cols'] doesn't work
by Philip Rhoades 23 Dec '15

23 Dec '15

People, I have logged out of RCM, changed the defaults.inc.php file on the server, restarted the dovecot service and logged back into RCM (all a couple of times now) but the displayed columns and order do not change . . am I missing something? - I want the little '+' thread icon as the first column again . . Thanks, Phil. -- Philip Rhoades PO Box 896 Cowra NSW 2794 Australia E-mail: phil(a)pricom.com.au

2 2

Re: [RCU] Config: ssl:// vs tls://
by Zhang Huangbin 18 Dec '15

18 Dec '15

> (2) Would/can you ever use tls:// with IMAP? In which cases? > (3) Why would SMTP fail with ssl://? Do your SMTP and IMAP servers support them? ‎ ---- Zhang Huangbin, founder of iRedMail project: http://www.iredmail.org/ Time zone: GMT+8 (China/Beijing).

3 2

Config: ssl:// vs tls://
by Paul Schreiber 16 Dec '15

16 Dec '15

For my configuration to work, I have to use ssl:// for IMAP and tls:// for SMTP: $config['default_host'] = 'ssl://shrub.ca'; $config['default_port'] = 993; $config['smtp_server'] = 'tls://shrub.ca'; $config['smtp_port'] = 587; (1) Why is that? (2) Would/can you ever use tls:// with IMAP? In which cases? (3) Why would SMTP fail with ssl://? ERROR: fsockopen(): unable to connect to ssl://localhost:587 (Unknown error) (0) ERROR: Failed to connect socket: fsockopen(): unable to connect to ssl://localhost:587 (Unknown error) () <5kagdbq1> SMTP Error: Connection failed: Failed to connect socket: fsockopen(): unable to connect to ssl://localhost:587 (Unknown error) in /usr/local/roundcube/program/lib/Roundcube/rcube.php on line 1587 (POST /?_task=mail&_unlock=loading1450230927143&_lang=en_US&_framed=1?_task=mail&_action=send) ERROR: fsockopen(): unable to connect to ssl://shrub.ca:587 (Unknown error) (0) ERROR: Failed to connect socket: fsockopen(): unable to connect to ssl:// shrub.ca:587 (Unknown error) () <5kagdbq1> SMTP Error: Connection failed: Failed to connect socket: fsockopen(): unable to connect to ssl://shrub.ca:587 (Unknown error) in /usr/local/roundcube/program/lib/Roundcube/rcube.php on line 1587 (POST /?_task=mail&_unlock=loading1450230965840&_lang=en_US&_framed=1?_task=mail&_action=send) Paul

1 0

S/MIME
by Владимир Горпенко 15 Dec '15

15 Dec '15

Hello! My smime_crypto plugin is a server-side project. Storing certificates and keys - a very specific task. So I use separate plugin to manage certificates and keys. Currently it is implemented as a temporary and simplest variant - files. In future it will be a very specific solution, only suitable for my situation. I use php openssl. I had to add 2 new hooks into rcube_imap class because the existing hooks are not sufficient for this task. As a variant I am considering the usage of openssl utilits, but not now. I am ready to give the results of my work to anyone who is interested and to help. But I will not be able to research the structure of Enigma and to build into it my modules. With best regards, Vladimir Gorpenko

1 0

S/MIME
by Владимир Горпенко 14 Dec '15

14 Dec '15

Sorry. In a previous letter mistake. It should read: I inform you that today I started testing of the S/MIME decryption and signature verification plugin for Roundcube. Encryption and signing, as I hope, will be implemented before the end of the year. Vladimir Gorpenko

1 0

S/MIME
by Владимир Горпенко 14 Dec '15

14 Dec '15

Hello! I inform you that today I started testing of the S/MIME encryption and signature verification plugin for Roundcube. Encryption and signing, as I hope, will be implemented before the end of the year. I need a wide variety of sample letters for testing. So I'll be very grateful if someone sends me a letter. My certificate for encryption is given below. The signed letter should contain the sender's certificate is attached. If you are interested in my work, I'll be happy to answer questions. Vladimir Gorpenko, Moscow -----BEGIN CERTIFICATE----- MIIFJzCCAw+gAwIBAgIBBTANBgkqhkiG9w0BAQsFADBTMQswCQYDVQQGEwJSVTEP MA0GA1UEBwwGTW9zY293MRIwEAYDVQQKDAlPT08gU3RlbHMxCzAJBgNVBAsMAkNB MRIwEAYDVQQDDAlPT08gU3RlbHMwHhcNMTUxMTEzMTU0MTE4WhcNMjUxMTEwMTU0 MTE4WjBaMQswCQYDVQQGEwJSVTESMBAGA1UECgwJT09PIFN0ZWxzMRowGAYDVQQD DBFWbGFkaW1pciBHb3JwZW5rbzEbMBkGCSqGSIb3DQEJARYMdmdvQHN0ZWxzLnJ1 MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAuwEx70UNttNcSYpmGKXR fJ72w91Lj2NQ5CEnSMgxpYKeOWx3W+hL3A2jpnhwEWOTcGdIKJjAYtYyHJDdD6m3 rJA1TszVUiTuhcVddoNWkuKPeTc7OGz7HrmFW2CyMLa9M+bmDuozpx58XhXYVQv2 DL/B2FOEEsZ6EjSY5z2V1VHORfNkOr40V0kaM7BB+oaMOTavcs86sHhxdoQ9jTt3 R9lYM++umsxeD/QIGz4ExdJushfD2sXq8xWovP6c9K6YspmKtEEhP4ddIV/I8qsh HtdIvU+OBsy50t5cIsDUXN4VqL5S5dz1uHwKjfbYW+YO0CgEGLFJXkFroS3vgKPu iwIDAQABo4H+MIH7MAkGA1UdEwQCMAAwEQYJYIZIAYb4QgEBBAQDAgWgMCwGCWCG SAGG+EIBDQQfFh1PcGVuU1NMIEdlbmVyYXRlZCBDZXJ0aWZpY2F0ZTAdBgNVHQ4E FgQUiGj2YPuGdm7proGUOAHfLaqWioMwHwYDVR0jBBgwFoAUACY3vH8D4BoCz5F9 auKSW6OtdH0wOwYIKwYBBQUHAQEELzAtMCsGCCsGAQUFBzAChh9odHRwOi8vd3d3 LnN0ZWxzLmxvYy9yb290Q0EuY3J0MDAGA1UdHwQpMCcwJaAjoCGGH2h0dHA6Ly93 d3cuc3RlbHMubG9jL3Jvb3RDQS5jcmwwDQYJKoZIhvcNAQELBQADggIBAG4IVpND KpHGRu2OKI1RkhTOD8SehUqBFAmovaUpto/erX+2sfEjmQAGIeA83FHJS7lh1y6z dr0aLo29esTSiWAb+uxry7cQYI/hhvrClOd/ajO8SNiYt51tPZLWiYFN0aYE03jb XbG5Rf/HT16cNKZEDYlPXg7GcaicNBh4GNj0pTGVGhxHtzqaeVGAl4MHAejx1VSY BYDXWt586kDYVWSjn1dMvGlbVeLNk/kJkaE74AHL9/HLEM9xluz85HWKUdvCe7u0 tVPIiMl2J45FcarzOe87yyw+HTSF9cI5zEsgKv3we0kXg64gYzwlaudfQmZI3Mgi kwT51BOA/VANIS1gBX3sqSzXkDQWC8GFyydIMk3K4s2d8AEDK2zV73eNSH62E0oH 3iCvAFh5W+xnO6N/uWVdWgV8ZDg2YTqkYjZN1GISxPvLgGnsuUtiR/PbeWlDmT38 b9bxBabWd3sNJgqkJ5LtQ0DF1rKoiH90zVh/lO9U11Lru/vQq1y+wEajS2iE3rh2 v/S0mjNbTT7icEU22FyGjMRB6iCbq/X7OuL/K4IsauN+8xYdUJ2jyiPuzNUb/5sF SGphx4fbpMjSu8u/ylPN5E4JrvxR1/tnzEQskIPCCergzSIUQFWPLtXAg6ZhQczz TeJEcyZO4h54S/AMHrRO+H8LgUL4b2SeQx9d -----END CERTIFICATE-----

2 1

(no subject)
by Krystian 13 Dec '15

13 Dec '15

Hi, I set up 1.2 I got server side option I can send crypted message to gmail and chrome plugin decrypts its fine. But when send from chrome to server it gets code and theres no option to decrypt I got it on auto decrypt but still no go Server side decrypt not working? it should decrypt automaticaly? I just get coded message have to use Mailvelope to decrypt it whats I am missing ? <?php > > // Enigma Plugin options > // -------------------- > > // A driver to use for PGP. Default: "gnupg". > $config['enigma_pgp_driver'] = 'gnupg'; > > // A driver to use for S/MIME. Default: "phpssl". > $config['enigma_smime_driver'] = 'phpssl'; > > // Keys directory for all users. Default 'enigma/home'. > // Must be writeable by PHP process > $config['enigma_pgp_homedir'] = null; > > // Enables signatures verification feature. > $config['enigma_signatures'] = true; > > // Enables messages decryption feature. > $config['enigma_decryption'] = true; > > // Enables messages encryption and signing feature. > $config['enigma_encryption'] = true; > > // Enable signing all messages by default > $config['enigma_sign_all'] = true; > > // Enable encrypting all messages by default > $config['enigma_encrypt_all'] = true; > > // Default for how long to store private key passwords (in minutes). > // When set to 0 passwords will be stored for the whole session. > $config['enigma_password_time'] = 0; > > // Enables server-side keys generation which would be used > // if user browser does not support web-crypto features. > // > // WARNING: Key generation requires true random numbers, and as such can be > // slow. If the operating system runs out of entropy, key generation will > // block until more entropy is available. > // > // To solve that a hardware entropy generator or > // an entropy gathering daemon may be installed (e.g. randomsound). > > > $config['enigma_keygen_server'] = true; > >

1 0

Duplicate messages
by office＠mudix.com.au 08 Dec '15

08 Dec '15

HI, Hoping for some advice on how to delete duplicate email messages on my server- I have recently imported a .pst file into my outlook but have crated triplicate emails in the process. Thanks

3 2

Migrate to Roundcube from OWMail
by webmaster 07 Dec '15

07 Dec '15

I am examining the features and benefits of roundbox webmail. Since I have 7 years of mailboxes using OpenWebMail, another webmail, I have to take the decision if it is worth to migrate to roundcube now that I am contracting a different VPS with 1&1. Two questions: First, if my Sendmail mailserver OpenWebMail mailboxes contents Inbox, Sentmail, etc, can be read by roundcube or not. Second, compare the features of each one. OpenWebMail has tons of features, webdisk, multilanguage, customization, etc. and so it seems roundcube, Bottom line is there someone who knows OpenWebMail and can assist in comparing both or how to migrate from OWMail towards Roundcube ? I would appreciate any helping advice on this, please. Pete

1 0

R: Re: R: Issue with search in RC 1.1.3
by absolutely_free＠libero.it 06 Dec '15

06 Dec '15

Hi, thank you very much!boris it is not working on my system (maybe for some compatibility issue); anyway the problem was definitely in that mysql column.I simply deleted content in "preferences" and now it is working fine.Thank you again. ----Messaggio originale---- Da: javierdemiguel-ext(a)us.es Data: 27/11/2015 11.19 A: "absolutely_free(a)libero.it"<absolutely_free(a)libero.it>, "Roundcube Users mailing list"<users(a)lists.roundcube.net> Ogg: Re: [RCU] R: Issue with search in RC 1.1.3 I also had this problem. Check the user preferences in mysql (or your DB of choice) mysql> use roundcubemail; mysql> select preferences from users where username = 'USER@domain'\G *************************** 1. row *************************** preferences: a:19:{s........} Unserialize the data (I use boris https://github.com/borisrepl/boris): [1] boris> $opciones = unserialize('string') Then, look the search_mods for that user, the problem is just there. [2] boris> unset($opciones['search_mods']); Regards Javier El 27/11/15 a las 10:09, absolutely_free(a)libero.it escribió: Hi, I noticed that I have no problem with search through command line (telnet to 143). So I think dovecot is OK. It seems that this issue is only through webmail. Any idea? Thank you very much ----Messaggio originale---- Da: absolutely_free(a)libero.it Data: 11/11/2015 17.33 A: <users(a)lists.roundcube.net> Ogg: [RCU] Issue with search in RC 1.1.3 Hi, I am using RC 1.1.3 on CentOS server. My mail server is Dovecot. One of my customer is complainig about an issue during searches through webmail interface. The error he get is: [11-Nov-2015 16:35:41 +0100]: <nn2tv074> [DB20] S: A0005 BAD Error in IMAP command UID SEARCH: Unknown argument INBOX He has no problem in folders other than INBOX (I mean: sent, trash, and so on). How can I solve this? Thank you very much _______________________________________________ Roundcube Users mailing list users(a)lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users -- Apoyo a la Docencia e Investigación Servicio de Informática y Comunicaciones Gestión de Incidencias: https://sicremedy.us.es/arsys

1 0

Unrelated messages threaded together. Bug?
by Kaz Kylheku 04 Dec '15

04 Dec '15

Hi All, First off, I'm running a somewhat older version of RC, 0.9.x. Sorry! Anyway, I have just witnessed an interesting behavior. I submitted a bug against the GNU program "idutils" on Savannah, and received the bug creation e-mail. This e-mail appeared as a thread item underneath a completely unrelated e-mail I received last week: a newsletter from a local Japanese temple. The newsletter appears as the top item in the thread, and the newly received bug e-mail as its (only) child. Staring at the two sets of headers, I cannot see anything that accidentally links them together ... ... except for one detail! The bug e-mail has a References: header which is empty. And the newsletter has no Message-ID: header. If the empty References header is interpreted as referencing an empty-string Message-ID, and if the missing message-ID is interpreted as an empty string Message-ID, then ... you catch my drift! The second e-mail looks like it is referencing the first as its parent. The two sets of headers follow. First the newsletter's headers received last week (exhibit "A"), and then the bug e-mail (exhibit "B"). Exhibit "A": Return-path: <tozenji(a)telus.net> Envelope-to: kaz(a)kylheku.com Delivery-date: Fri, 27 Nov 2015 14:04:15 -0800 Received: from cmta7.telus.net ([209.171.16.80]) by kylheku.com with esmtp (Exim 4.72) (envelope-from <tozenji(a)telus.net>) id 1a2R7m-0007D3-I0 for kaz(a)kylheku.com; Fri, 27 Nov 2015 14:04:15 -0800 Received: from localhost ([64.180.39.205]) by cmta7.telus.net with TELUS id mm3U1r0064Ras2801m47pD; Fri, 27 Nov 2015 15:04:08 -0700 X-Authority-Analysis: v=2.1 cv=A+uRRPiG c=1 sm=2 tr=0 a=Oc6Q1KTYVYikFeLFcDQJHA==:117 a=Oc6Q1KTYVYikFeLFcDQJHA==:17 a=aatUQebYAAAA:8 a=r77TgQKjGQsHNAKrUKIA:9 a=CUJVIynGHR4dnTi5KVoA:9 a=UAVRJdkkkM0A:10 a=mepeOn7sdJp2bPwcTCwA:9 a=fMZ_E1CIlfQA:10 X-Telus-Outbound-IP: 64.180.39.205 From: =?ISO-2022-JP?B?VG96ZW5qaQ==?= <tozenji(a)telus.net> To: =?ISO-2022-JP?B?S2F6IEtZTEhFS1UgKGthekBreWxoZWt1LmNvbSk=?=<kaz(a)kylheku.com> Reply-To: <tozenji(a)telus.net> Date: Fri, 27 Nov 2015 14:04:09 -0800 Subject: =?ISO-2022-JP?B?VG96ZW5qaSBOZXdzbGV0dGVyIC0gSm9kby1lIGFuZCBLYWl6YW5raSAtIERlYyA2IA==?= MIME-Version: 1.0 Content-Type: multipart/mixed; boundary=__MIME_BOUNDARY_WSMAIL__ DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=telus.net; s=neo; t=1448661848; bh=NJopTGH1QQJkFm4xJNzsktOd/U0X4FM62+5RSk9UsWA=; h=From:To:Reply-To:Date:Subject:MIME-Version:Content-Type; b=FJUX7v/r6GasosFqOv+cCDTweNIiucl79mbDBjo02jNFPAOuQ3MDuzch582cAuKko I2fl5GbmB3FKSLctnPSp8uBXyyhpSeEJdWXvfBxCk3Do5q1HfutIxxeOe3jcBO6+gy aKFyx+uDQBqyJGPVgq/9v+DCZSBR1GoHv+MRwPjjJ605u6fEaMuZaTDwdheI9Tks7q +cZ7qlLEbRNtQj0Sz6o/3M904lwoBFtUKbIdZzn7015Qs8afv573YxkG9i5XI6LaTM TmpTIZOAvuWF77nk2rZYq+qejEuO7ZwhsKffsfZ2cR+ttz7/3zs+SftpE6rtxuv2Q1 hQq5lpX6YYvEA== Exhibit "B": Return-path: <www-data(a)savannah.gnu.org> Envelope-to: kaz(a)kylheku.com Delivery-date: Thu, 03 Dec 2015 16:57:12 -0800 Received: from savannah.gnu.org ([208.118.235.70] helo=frontend.savannah.gnu.org) by kylheku.com with esmtps (TLS1.0:RSA_AES_256_CBC_SHA1:32) (Exim 4.72) (envelope-from <www-data(a)savannah.gnu.org>) id 1a4egS-0008Nl-6p for kaz(a)kylheku.com; Thu, 03 Dec 2015 16:57:12 -0800 Received: from www-data by frontend.savannah.gnu.org with local (Exim 4.72) (envelope-from <www-data(a)savannah.gnu.org>) id 1a4egJ-0000v5-M0 for kaz(a)kylheku.com; Fri, 04 Dec 2015 00:57:03 +0000 Date: Fri, 04 Dec 2015 00:57:03 +0000 To: Kaz Kylheku <kaz(a)kylheku.com> Subject: [bug #46602] mkid --prune=X complains about nonexistence of X X-PHP-Originating-Script: 0:sendmail.php From: Kaz Kylheku <INVALID.NOREPLY(a)gnu.org> X-Savane-Server: savannah.gnu.org:443 [208.118.235.70] MIME-Version: 1.0 Content-Type: text/plain;charset=UTF-8 X-Savane-Project: idutils X-Savane-Tracker: bugs X-Savane-Item-ID: 46602 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:42.0) Gecko/20100101 Firefox/42.0 X-Apparently-From: 216.31.219.19 (Savane authenticated user kkylheku) Message-Id: <20151203-165702.sv71961.44257(a)savannah.gnu.org> References: In-Reply-To: Received-SPF: none X-SPF-Guess: pass

2 1

R: Issue with search in RC 1.1.3
by absolutely_free＠libero.it 27 Nov '15

27 Nov '15

Hi,I noticed that I have no problem with search through command line (telnet to 143).So I think dovecot is OK.It seems that this issue is only through webmail.Any idea?Thank you very much ----Messaggio originale---- Da: absolutely_free(a)libero.it Data: 11/11/2015 17.33 A: <users(a)lists.roundcube.net> Ogg: [RCU] Issue with search in RC 1.1.3 Hi,I am using RC 1.1.3 on CentOS server.My mail server is Dovecot.One of my customer is complainig about an issue during searches through webmail interface. The error he get is: [11-Nov-2015 16:35:41 +0100]: <nn2tv074> [DB20] S: A0005 BAD Error in IMAP command UID SEARCH: Unknown argument INBOX He has no problem in folders other than INBOX (I mean: sent, trash, and so on). How can I solve this?Thank you very much

1 0

running composer for plugins
by Fabian Santiago 26 Nov '15

26 Nov '15

Hello all, I installed the RC v1.2 beta and updated my composer and ran it. It completed successfully but presented me with this text at the end: Skipped installation of bin phpunit for package phpunit/phpunit: name conflicts with an existing file patchwork/utf8 suggests installing ext-wfio (Use WFIO for UTF-8 filesystem access on Windows) phpdocumentor/reflection-docblock suggests installing dflydev/markdown (~1.0) phpdocumentor/reflection-docblock suggests installing erusev/parsedown (~1.0) sebastian/global-state suggests installing ext-uopz (*) phpunit/phpunit-mock-objects suggests installing ext-soap (*) phpunit/php-code-coverage suggests installing ext-xdebug (>=2.2.1) phpunit/phpunit suggests installing phpunit/php-invoker (~1.1) Questions are: 1.> Do I have to or should I follow this guidance? 2.> would doing so require me to add any addt'l repos to the composer.json file? 2a.) such as https://packagist.org. or is this repo automatically assumed to be enabled by default? I only ask because it is not explicitly listed. Thank you. My php version is 5.4.45. -- Fabian S.

2 1

Roundcube Webmail 1.2-beta out now
by Thomas Bruederli 24 Nov '15

24 Nov '15

We're proud to announce that the beta release of the next major version 1.2 of Roundcube webmail is out now for download and testing. With this milestone we introduce new features primarily focusing on security and PGP encryption: * PHP7 compatibility * PGP encryption * Drag-n-drop attachments from mail preview to compose window * Mail messages searching with predefined date interval * Improved security measures to protect from brute-force attacks And of course plenty of small improvements and bug fixes. The PGP encryption support in Roundcube comes with two options: Mailvelope -------------- The integration of this browser plugin [1] for Firefox and Chrome comes out of the box in Roundcube 1.2 and is enabled if the Mailvelope API is detected in a user's browser. See the Mailvelope documentation [2] how to enable it for your site. Read more about the Mailvelope integration and how this looks like in Alec's blog [3]. Enigma plugin ------------------- This Roundcube plugin adds server-side PGP encryption features to Roundcube. Enabling this means that users need to fully trust the webmail server as encryption is done on the server GnuPG and private keys are also stored there. In order to activate server-side PGP encryption for all your users, the 'enigma' plugin, which is shipped with this package, has to be enabled in the Roundcube config. See the plugin's README for details. Also read Alec's blogpost about the Enigma plugin and how it works [4]. Both encryption features are pretty new and not yet perfectly documented. We'd much appreciate your feedback and your contribution to the end-user documentation [5] or our wiki page [6]. IMPORTANT: with this version, we finally deprecate some old Roundcube library functions [7]. Plugin developers, please test your plugins thoroughly and look for deprecation warnings in the logs. These function will be removed in the final 1.2.0 release and can therefore render plugins dysfunctional. See the full changelog on trac.roundcube.net [8] and download the new packages from https://roundcube.net/download Please note that this is a beta release and we recommend to test it on a separate environment. And don't forget to backup your data before installing it! Enjoy and please share your experience either through our mailing lists or as comments in the blog posts mentioned above. Kind regards, Thomas [1] https://www.mailvelope.com [2] https://www.mailvelope.com/en/help#watchlist [3] https://kolabian.wordpress.com/2015/10/10/mailvelope-integration-pgp-encryp… [4] https://kolabian.wordpress.com/2015/10/13/enigma-plugin-pgp-encryption/ [5] http://trac.roundcube.net/wiki/Online_Help [6] http://trac.roundcube.net/wiki/Dev_Encryption [7] https://github.com/roundcube/roundcubemail/blob/master/program/include/bc.p… [8] http://trac.roundcube.net/wiki/Changelog

3 5

Message Copy to Folder button?
by Jari Fredriksson 23 Nov '15

23 Nov '15

Hello. I remember seeing this kind of a button in some version of Roundcube, it was under Centos 7. Now I'm using the version shipped in Debian Wheezy (Raspbian), and it seems not to have it. Is that a feature of some addon, theme package or something? How could I enable it in this? Thanks. -- jarif.bit

1 0

How to use squirrelmail_usercopy?
by Vinicius Masiero 12 Nov '15

12 Nov '15

Hello guys, i have a basic question. I have a squirrelmail and i want migrate it to Roundcube. In my researches i found the plugin squirrelmail_usercopy to migrate the database from squirrel to Roundcube. But i dont know how to use it. Somebody can help me? Thanks!

1 0

Issue with search in RC 1.1.3
by absolutely_free＠libero.it 11 Nov '15

11 Nov '15

Hi,I am using RC 1.1.3 on CentOS server.My mail server is Dovecot.One of my customer is complainig about an issue during searches through webmail interface. The error he get is: [11-Nov-2015 16:35:41 +0100]: <nn2tv074> [DB20] S: A0005 BAD Error in IMAP command UID SEARCH: Unknown argument INBOX He has no problem in folders other than INBOX (I mean: sent, trash, and so on). How can I solve this?Thank you very much

1 0

Roundcube inserting blank space at the start of email
by Steve Perkins 29 Oct '15

29 Oct '15

Hi All I have a curious problem (probably shown on this email) where Roundcube (I assume) is inserting blank space at the top of emails. It happens on new mail, replies and forwards but it doesn't insert the space until after I hit send. It's also not consistent - happens sometimes not others even exactly replicating the process. If I look at the source, the text version has a couple bonus linefeeds, and the html version has : <p> </p> <div> </div> I'm not inserting any blanks, and it happens even if I create an email and type just one word, no space key, no enter key. Does seem to only be html compose so maybe TinyMCE issue ? Its not exactly the end of the world, but it is a little annoying. I'm on the latest version: 1.1.3 Anyway, any ideas would be appreciated. Thanks Steve

4 5

BugTracker
by Jorge Bastos 22 Oct '15

22 Oct '15

Hi, I need to fill a bug in the trac system, but when I press "create" it doesn't create and takes forever. Is it possible to review the system? Jorge,

1 0

install errors while running "new" install script.
by Thing 19 Oct '15

19 Oct '15

- Though note I am on raspberian not Debian (not sure if that matters). - - debian_install_mysql_1.1.2.sh <http://trac.roundcube.net/attachment/wiki/Howto_Install/debian_install_mysq…> <http://trac.roundcube.net/raw-attachment/wiki/Howto_Install/debian_install_…> (10.0 KB) - added by *karchnu* 3 months ago <http://trac.roundcube.net/timeline?from=2015-08-02T18%3A08%3A19-04%3A00&pre…>. new debian mysql installation script ==== root@warlocke:/etc/apache2/conf.d# sh debian-install.sh debian-install.sh: 32: read: Illegal option -s mysqlroundcubepassword [9pqTdDYSV5KHtGQvgMnw]:xxxxxx httproot [/var/www]: roundcubesitename [roundcube]: roundcubeproductname [Roundcube Webmail]: roundcubelanguage [en_US]: user [root]: domain [yourdomain.tld]: graywitch.co.nz roundcube downloading in /tmp/roundcubemail-1.1.2.tar.gz untar /tmp/roundcubemail-1.1.2.tar.gz remove the tarfile mv /var/www/roundcubemail-* /var/www/roundcube get PHP composer #!/usr/bin/env php All settings correct for using Composer Downloading... Composer successfully installed to: /var/www/roundcube/composer.phar Use it: php composer.phar Loading composer repositories with package information Initializing PEAR repository http://pear.php.net [RuntimeException] Failed to execute git clone --mirror ' https://git.kolab.org/diffusion/PNL/php-net_ldap.git' '/root/.composer/cache/vcs/https---git.kolab.org-diffusion-PNL-php-net-l dap.git/' error: server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none while accessing https://git.kolab.org/diffusion/PNL/php-net_ ldap.git/info/refs fatal: HTTP request failed install [--prefer-source] [--prefer-dist] [--dry-run] [--dev] [--no-dev] [--no-plugins] [--no-custom-installers] [--no-autoloader] [--no-scripts] [--no-progress] [-v|vv|vvv|--verbose] [-o|--optimize-autoloader] [-a|--classmap-authoritative] [--ignore-platform-reqs] [packages1] ... [packagesN] change the rights in the /var/www/roundcube directory database setup Enter password: ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO) ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO) ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO) Enter password: no crontab for root Module deflate already enabled Enabling module expires. To activate the new configuration, you need to run: service apache2 restart Enabling module headers. To activate the new configuration, you need to run: service apache2 restart ERROR: Site roundcube does not exist! apache2: Syntax error on line 265 of /etc/apache2/apache2.conf: Syntax error on line 271 of /etc/apache2/conf.d/debian-install.sh: /etc/apache2/conf.d/debian-install.sh:271: <?php> was not closed. Action 'configtest' failed. The Apache error log may have more information. failed! check install-roundcube.log for errors root@warlocke:/etc/apache2/conf.d# debian-install.sh -su: debian-install.sh: command not found root@warlocke:/etc/apache2/conf.d# vi debian-install.sh root@warlocke:/etc/apache2/conf.d# ====== Should this work on raspberian?

1 0

Mails not displayed in 1.1.3?
by Markus Wernig 18 Oct '15

18 Oct '15

Hi all I must be missing something basic ... On two installations of 1.1.3 (one a fresh install, the other an upgrade from 0.7.2) I get the same symptom: User logs in successfully, IMAP folders are displayed in the left navigation bar, together with the correct count of unread messages, but the folder contents are not shown. I.e. no mails can be read. Whenever a user clicks on a folder, the "Loading..." animated bar appears and stays there forever (some minutes) before disappearing. Nothing is displayed on most folders. Strangely, for _some_ folders, some messages ARE displayed, and if that happens, it's always the latest messages that were added in that folder. Any hint for a lost soul? thx /markus

1 0

calendar plugin errors
by Nick Edwards 18 Oct '15

18 Oct '15

Using the calendar and libcalendaring plugins from kolab git with current stable RC 1.1.3 doesnt work, save error, yes, i did run the mysql init, errors report: no e.* are created by the database setup scripts? DB Error: [1054] Unknown column 'e.calendar_id' in 'where clause' (SQL Query: SELECT e.*, (SELECT COUNT(attachment_id) FROM attachments WHERE event_id = e.event_id OR event_id = e.recurrence_id) AS _attachments FROM events e WHERE e.calendar_id IN ('1') AND e.start <= '2015-12-07 00:00:00' AND e.end >= '2015-10-26 00:00:00') in /web/webmail/program/lib/Roundcube/rcube_db.php on line 543 (GET /?_task=calendar&source=1&_action=load_events&start=1445781600&end=1449410400&_=1445063150065)

3 4

LDAP configuration issue
by Ervin Hegedüs 13 Oct '15

13 Oct '15

Hi there, I would like to make an LDAP addressbook. I've found this documentation: http://trac.roundcube.net/wiki/Howto_Config/Ldap http://trac.roundcube.net/wiki/Howto_Config_LDAP Looks like this is an old version (the newer version of LDAP doesn't use slapd.conf. There is a script, which creates RoundCube LDAP user, and subtree for addressbook. (http://trac.roundcube.net/attachment/wiki/Howto_Config/Ldap/rcabook-setup.sh) I've installed an OpenLDAP server, which has a "new-style" configuration. When I execute that script, I got an error: RoundCube user could't make the private and public subtree's. My first question is, why? I didn't fond the solution. Okay, I've made it as (LDAP) admin (the subtrees). Then the RoundCube LDAP user could't write those subtree's. The error message is: ldap_add: Insufficient access (50) additional info: no write access to parent Could anybody helps? Thanks, a. -- I � UTF-8

1 0

Forgot_password RC
by Felipe Felipe 11 Oct '15

11 Oct '15

Hi to all. I would like to know if someone have installed the plugin forgot_password of RC. ? i have install but don't works I have installed the plugin password and work fine but plugin forgot_password don't work. Someone has installed and working ? Thank's in advance

3 4

calendar plugin bug
by Mesut GULNAZ 10 Oct '15

10 Oct '15

when an invitation accepted by another user, ( and also an attachment is attached) the attached files are getting ONE MORE increased. same as the copy of the original file. what is the problem any one know any thing? -- İyi çalışmalar... Mesut GÜLNAZ

1 0

Just one user can't send email via Roundcube.
by Dave Overton 10 Oct '15

10 Oct '15

I have been looking at this all morning, and its driving me nuts. Perhaps you all can see something I am missing. roundcube 1.1.3 (same with 1.1.2) One user I am aware of, of some 700 registered, has this issue. I hope someone has some suggestions. He can't send mail. At all. I enabled all the logs, userlogins shows him connecting, imap shows him fetching mail, session shows his session, sql shows the address book lookups, errors shows nothing, and when I hit send, there is no data being put in smtp or sendmail. The "sending mail" spins until it times out at 90 seconds, then the message just sits there. None of the logs reflect anything, php error log doesn't add a line at all. Apache error log shows this: [Fri Oct 09 11:00:29 2015] [warn] [client xxx.xxx.xxx.xxx] mod_fcgid: read data timeout in 91 seconds, referer: http://www.syix.info/roundcube/?_task=mail&_action=compose&_id=1339993062561 800597488d [Fri Oct 09 11:00:29 2015] [error] [client xxx.xxx.xxx.xxx] Premature end of script headers: index.php, referer: http://www.syix.info/roundcube/?_task=mail&_action=compose&_id=1339993062561 800597488d Last couple of lines in access.log xxx.xxx.xxx.xxx - - [09/Oct/2015:10:58:58 -0700] "POST /roundcube/?_task=mail&_unlock=loading1444413531122&_lang=en_US&_framed=1 HTTP/1.1" 500 536 "http://www.syix.info/roundcube/?_task=mail&_action=compose&_id=133999306256 1800597488d" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:41.0) Gecko/20100101 Firefox/41.0" xxx.xxx.xxx.xxx - - [09/Oct/2015:11:03:40 -0700] "POST /roundcube/?_task=mail&_unlock=loading1444413813616&_lang=en_US&_framed=1 HTTP/1.1" 500 536 "http://www.syix.info/roundcube/?_task=mail&_action=compose&_id=133999306256 1800597488d" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:41.0) Gecko/20100101 Firefox/41.0" Tested his account with another imap client, it works normally. I can't see anything strange in his settings, and its only roundcube that seems to have this issue. Changed his password with no effect. Any thoughts? Dave Overton, Owner SYIX.COM dave(a)syix.com 530-755-1751 FAX 530-751-8871

1 1

roundcube on iphone: huge font
by Mrten 05 Oct '15

05 Oct '15

Hello folks, My RC 1.1.3 show 'zoomed' mails for me on the (latest?) iPhone, in mail-view, default larry-skin. I tested iphone (9.0.0) and ipad (9.0.0), and on the -pad everything is OK, but on the -phone, when you double-tap an email in the overview just after logging in, everything is zoomed out and unusable (see attachment, all you see is the logo). Can't seem to un-zoom. Everything is there when you scroll, it's just unreadable. Has anyone seen this as well? (Can't check trac, seems down) Maarten.

4 4

trac.roundcube.net ist nicht erreichbar
by Tronde 05 Oct '15

05 Oct '15

Hallo, ich kann http://trac.roundcube.net und Unterseiten nicht mehr erreichen. Sind von diesem Problem noch weitere Benutzer betroffen? NSLOOKUP löst auf folgende IP-Adresse auf: Non-authoritative answer: Name: trac.roundcube.net Address: 198.245.62.72 Der Zugriffsversuch schlägt von verschiedenen Geräten aus fehl. Mfg Tronde

3 2

Plugin zipdownload
by ratatouille 30 Sep '15

30 Sep '15

Hello! I remember there was a possibility to download zipped folders. I activated the zipdownload plugin but I don't see a possibility to download complete folders. On left in the folderlist down the screen I see an option to pack the active folder. What does this function do? I click on it and on the right a little window pops up saying (in german) the folder was succesfully packed. What does that mean? And why can't I download a zipped folder? Regards Andreas

2 1

Recommended CalDAV/Calendering for RC
by Robert Schüttler 28 Sep '15

28 Sep '15

Hello everyone, are there any of you that run a CalDAV/Calendar server that's somehow integrated in Roundcube? If so: - Which one did you pick and why? - How is it working out? - Does sync with other clients (iOS/Android/Thunderbird) work? - Which plugin(s) are required? - Are there a lot of support requests? I would be happy to get a bit of feedback to get a feel for the current state of things. Cheers, Robert

6 9

logging in from different domains
by ratatouille＠nimmini.de 27 Sep '15

27 Sep '15

Hello! I have asked a similar question in the past but got no satisfying answer. With roundcube I connect to dovecot on port 143. The thing is I can connect to the IMAP-server with user(a)aaa.de to user(a)bbb.de. Both domains exist on the IMAP-server. Even if I specify $config['default_host'] = 'tls://mail.bbb.de'; I can connect with user(a)aaa.de and get into the mailbox of user(a)aaa.de I find this somewhat crazy and annoying. I was hoping that when I configure auth_realms = aaa.de bbb.de in docecots config, the differences would be honoured but it isn't like this. What steps need to be taken that such a cracy behaviour does not happen? Or is it just not possible to distiguish between different domains? Regards Andreas

1 0

update to 1.1.3
by Lorenzo Petracchi 21 Sep '15

21 Sep '15

Is it possible to upgrade from 1.1.1 dependent to 1.1.3 complete?

1 0

Updates 1.1.3 and 1.0.6 released
by Thomas Bruederli 21 Sep '15

21 Sep '15

Dear Roundcube users We recently published updates to both stable versions 1.0 and 1.1 after fixing many minor bugs and ensuring compatibility with upstream versions of 3rd party libraries used in Roundcube. Version 1.0.7 comes with cherry-picked fixes from the more recent version to ensure proper long term support. See the full changelog here: http://trac.roundcube.net/wiki/Changelog Both versions are considered stable and we recommend to update all productive installations of Roundcube with either of these versions. Download them from https://roundcube.net/download As usual, don't forget to backup your data before updating! Best, Thomas P.S. Stay tuned for the 1.2 beta release coming up soon with two options for PGP encryption.

4 4

autocreate account
by ratatouille 14 Sep '15

14 Sep '15

Hello! If I put my users in a MySQL-database, is there a plugin available to autocreate an account then? Or is there a way to achieve an autocreate account with Roundcube? Regards Andreas

2 2

php-pear-Net-LDAP3 Requirements for roundcube-plugin-kolab
by Thomas Spuhler 13 Sep '15

13 Sep '15

What is the plan for php-pear-Net-LDAP3. Is this going to become a real pear package? I just packaged it for Mageia Cauldron -- Best regards Thomas Spuhler All of my e-mails have a valid digital signature ID 60114E63

1 0

Changing user passwords
by Walt Kelley 10 Sep '15

10 Sep '15

Is there a simple way to have a user change their password or does it have to be done from the administrator? -- Best regards, Walter Financial Administrator walt(a)casegoodsrefinishing.com

2 1

Additional Identity in Roundcube
by Tronde 04 Sep '15

04 Sep '15

Hello Roundcube-Users, As a new subscriber to this list, I hope you could help me with my first question. In Roundcube I could add an additional Identity under settings -> identity. Why couldn't I change the e-mail address for the knew identity? For example: My login is foo(a)example.org and I like to add an identity with the e-mail address bar(a)example.org. But I couldn't change the e-mail address in the identity dialog. On some of my desktops I use Thunderbird and the same mailbox. Here it is possible to add an identity with an alternative e-mail address. Why isn't this possible in the Roundcube interface as well? Thank you in advance for your answers. Best regards, Tronde

2 3

roundcube ldaps addressbook
by Sunny 04 Sep '15

04 Sep '15

Hi, I want configure LDAP address book lookup, I have added the relevant info in main.inc.php using ldaps port 636 but I get the following error Sep 3 11:29:49 slapd[24950]: conn=22120 fd=19 closed (TLS negotiation failure) i.e. I need to put my LDAP certs somewhere on the web server and let roundcube know where these are - any ideas on where to configure this? Regards

5 5

I: Re: Dashes all of a sudden prepended to HTML signature
by mr cb 01 Sep '15

01 Sep '15

Inviato da Samsung Mobile -------- Messaggio originale -------- Da: Michael Heydekamp Data:31/08/2015 22:10 (GMT+01:00) A: Roundcube Users mailing list Oggetto: Re: [RCU] Dashes all of a sudden prepended to HTML signature Am 30.08.2015 21:06, schrieb Michael Heydekamp: > Am 30.08.2015 18:42, schrieb A.L.E.C: >> On 08/30/2015 05:09 PM, Michael Heydekamp wrote: >>> See subject. All of a sudden (= since today) dashes are prepended to a HTML >>> signature...?! Two when composing a new message, three upon replying. >>> >>> My signatures do contain dashes already, so I'd prefer if they wouldn't be >>> touched in any way (as before). >> >> Should be fixed now. > > Can't confirm yet, as I have to wait for our next git-pull cron job. But > thanks a lot anyway. :) This I can confirm now, thanks again. As to this issue: > On another issue (but most likely related): I activated the new (and very > useful!) option "always, except when replying to plain text" as to when HTML > messages should be composed, but: When replying to a plain text message, no > sig at all is injected into the message - at least not, when it's declared > as a HTML sig. > > Shouldn't we need two sigs (text and HTML) then...? Now a (converted from HTML to text) sig is injected, but it's not usable: ------------------------------- > -- > MICHAEL HEYDEKAMP > > T > +49 211 xxxxxxx > > F > +49 211 xxxxxxx > > M > +49 172 xxxxxxx > > xxxxxxx(a)xxxxxx.de > http://www.xxxxxx.de ------------------------------- Please see attached how the original HTML sig does look like (edited, of course). It's a table, as I want to have a correct left-alignment of the numbers. I really think that two sigs (HTML and text) would be the best and only way to REALLY solve this (also because that I could replace the logo with a company name in plain text). For now, I have reverted my setting to "always" (HTML). Which I don't like too much, but it's still the least worse solution currently. Anyway, thanks for working on this issue at all. Cheers, -- Michael Heydekamp Co-Admin freexp.de Düsseldorf/Germany _______________________________________________ Roundcube Users mailing list users(a)lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users

2 1

Dashes all of a sudden prepended to HTML signature
by Michael Heydekamp 01 Sep '15

01 Sep '15

See subject. All of a sudden (= since today) dashes are prepended to a HTML signature...?! Two when composing a new message, three upon replying. My signatures do contain dashes already, so I'd prefer if they wouldn't be touched in any way (as before). Or is there a sound reason for that? And if so, why does it apply to HTML sigs only then? Cheers, -- Michael Heydekamp Co-Admin freexp.de Düsseldorf/Germany

3 6

I: Re: Dashes all of a sudden prepended to HTML signature
by mr cb 31 Aug '15

31 Aug '15

Inviato da Samsung Mobile <div>-------- Messaggio originale --------</div><div>Da: Michael Heydekamp <listuser(a)freexp.de> </div><div>Data:31/08/2015 22:10 (GMT+01:00) </div><div>A: Roundcube Users mailing list <users(a)lists.roundcube.net> </div><div>Oggetto: Re: [RCU] Dashes all of a sudden prepended to HTML signature </div><div> </div>Am 30.08.2015 21:06, schrieb Michael Heydekamp: > Am 30.08.2015 18:42, schrieb A.L.E.C: >> On 08/30/2015 05:09 PM, Michael Heydekamp wrote: >>> See subject. All of a sudden (= since today) dashes are prepended to a HTML >>> signature...?! Two when composing a new message, three upon replying. >>> >>> My signatures do contain dashes already, so I'd prefer if they wouldn't be >>> touched in any way (as before). >> >> Should be fixed now. > > Can't confirm yet, as I have to wait for our next git-pull cron job. But > thanks a lot anyway. :) This I can confirm now, thanks again. As to this issue: > On another issue (but most likely related): I activated the new (and very > useful!) option "always, except when replying to plain text" as to when HTML > messages should be composed, but: When replying to a plain text message, no > sig at all is injected into the message - at least not, when it's declared > as a HTML sig. > > Shouldn't we need two sigs (text and HTML) then...? Now a (converted from HTML to text) sig is injected, but it's not usable: ------------------------------- > -- > MICHAEL HEYDEKAMP > > T > +49 211 xxxxxxx > > F > +49 211 xxxxxxx > > M > +49 172 xxxxxxx > > xxxxxxx(a)xxxxxx.de > http://www.xxxxxx.de ------------------------------- Please see attached how the original HTML sig does look like (edited, of course). It's a table, as I want to have a correct left-alignment of the numbers. I really think that two sigs (HTML and text) would be the best and only way to REALLY solve this (also because that I could replace the logo with a company name in plain text). For now, I have reverted my setting to "always" (HTML). Which I don't like too much, but it's still the least worse solution currently. Anyway, thanks for working on this issue at all. Cheers, -- Michael Heydekamp Co-Admin freexp.de Düsseldorf/Germany _______________________________________________ Roundcube Users mailing list users(a)lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users

1 0

Login from only a specific domain
by ratatouille 31 Aug '15

31 Aug '15

Hello! Is this a german speaking list? I have two domains running on a virtual server with one IP-address. How can I prevent users from logging in with an Email-address of either one of the two domains? Greetings Andreas

2 4

database maintenance
by Luciano Gabriel Andino 30 Aug '15

30 Aug '15

Hi ! just finishing roudcube db backup via mysqldump, noticed that session table has 105K rows, cache_messeges table about 162K rows. Does rcu database needs some kind of maintenance? I am using rcu about 5 years ago with 30 email acounts. thanks in advance, -- Saludos!! Luciano Andino GNU/Linux user #185103 Santa Fe - Argentina -----------------------------------------------

5 6

does Version 1.0.6 really require php-pear-Console_CommandLine
by Thomas Spuhler 29 Aug '15

29 Aug '15

Version 1.0.6 requires php-pear-Console_CommandLine which we don't package. The INSTALL file in the tarball says * PEAR packages distributed with Roundcube or external: - Mail_Mime 1.8.1 or newer - Mail_mimeDecode 1.5.5 or newer - Net_SMTP (latest from https://github.com/pear/Net_SMTP/) - Net_IDNA2 0.1.1 or newer - Auth_SASL 1.0.6 or newer - Net_Sieve 1.3.2 or newer (for managesieve plugin) - Crypt_GPG 1.2.0 or newer (for enigma plugin) but when building it, our build system says Requires: pear(Console/CommandLine.php) pear(Net/LDAP2.php) pear(Net/Socket.php) pear(PEAR.php) pear(PEAR/Exception.php) this means pear(Console/CommandLine.php) is mentioned somewhere in a file of the package, even if it wouldn't be needed. So the question is, do we really need it or can I add an exception in the RPM? -- Best regards Thomas Spuhler All of my e-mails have a valid digital signature ID 60114E63

5 7

Setting Attachment size limit with NGINX
by Fabian Santiago 28 Aug '15

28 Aug '15

I've set up Rc running on nginx but cannot figure out how to increase my attachment size limit. It's perpetually stuck at 5mb. My php backend is php-fpm. I've played with my php.ini values for upload and memory limits and I've also adjusted / set the post size limit in my nginx config but nothing doing. What am I missing? Thanks everyone. -- Fabe

3 3

Rondcube Down State
by Chris 26 Aug '15

26 Aug '15

Is there a way to take down roundcube and notify the state to end users? I'd like to have a 'service down' page during backups for the early birds when they come in.

5 11

Quota!!!
by Informático Leandro 25 Aug '15

25 Aug '15

hola listeros les agradesco si alguien me pudiera dar una ayuda con el tema de las quotas gracias de antemano

3 2

Roundcube grouping messages together in threads against my will
by Colin at TheBlast.FM 25 Aug '15

25 Aug '15

A couple weeks ago, Roundcube started grouping messages and replies to said messages in a thread, so that I have to dig through a thread to find new messages...as opposed to the way it used to work, which was to put new messages on the top of the stack of my inbox. I don't think I accidentally caused this to happen in the settings. How can I make Roundcube work the way it used to?

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users