- Users - Roundcube mailing lists

Need to open an "email" for refreshing list
by Mirko Galimberti 08 Jul '15

08 Jul '15

Hi All, I'm experiencing a issue with roundcube, when i receive an e-mail,roundcube show the "new message" notification but no new message shown in list. Same issue if I manually refresh e-mails or by pressing F5 on my browser for refreshing the webpage. To show the new message in the list I need to open an old e-mail and then when I go back to the list the new e-mail is shown. -- Distinti saluti Mirko Galimberti

1 0

(no subject)
by Kovács László 01 Jul '15

01 Jul '15

Hi, I'm Ben Kiss!I have already used RoundCube webmail system.My question is, how can I download my mails in one file, or one click.I have found one mode only, but it is bad for me, because it can't download all mails in one file or one click. It can download only one mail in one time. And I have lots of mail.Please help me! Bye!

3 5

connection error (failed to reach the server)
by Bob Miller 24 Jun '15

24 Jun '15

Hello, it was brought to my attention a few months ago that a mac user was seeing the following pop up dialogue box in roundcube with some frequency: connection error (failed to reach the server) At the time, I was chasing a problem with apache where hundreds of connections would open up within a matter of a minute or two, maxing out the allowed connections, and causing roundcube to be unavailable for about 1 minute a few times a day. Didnt' take me long to figure out the IP causing the apache problem was the same user reporting the error pop up. I never did figure out the root of the problem, but I suspected it had to do with the self-signed certs and the CA not being installed on the client's mac. A while later, another mac user started reporting the same error popping up, and I saw the same spike in http connections from this user's IP addresses. Investigated more, got the CA cert installed on this mac, didn't fix the problem, ended up again with no solution. Reloading apache always worked, but it was hard to be on hand whenever the connections spiked, so I wrote a little script that checks the number of connections and reloads apache when it gets over 400 connections. That solved the apache problem (bubblegum, I know), so I called it a mac anomaly put it on the back burner. the error popup didn't actually stop anything from working, just had to click it closed every few minutes, and my customers were amiable to doing just that. Over the last couple of months, I have learned/seen that the same popup happens on ipads and windows computers as well. I just worked on one windows computer where the popup happened in chrome/firefox/IE, with the CA installed so there is no certificate error. Conversely, I use roundcube every where I go on a wide variety of computers, and I do not see this error very often, if ever (can't remember seeing it while logged into my personal account right now). I definitely cannot reproduce it on my ubuntu machine in the office. Best as I can tell on google, the error indicates an http connection failure, but nothing actually fails to work. I can find nothing in the roundcube logs nor the apache logs, which I suppose is expected if the client is failing to connect to the server. The internet connections in my part of the world lack the speed the rest of the world sees; for example and average business/residential connection has a 512Kbps or 768Kbps upload speed, but surely just navigating in roundcube wouldn't flood that? The computer I was just working on is a few years old and a tad underpowered by modern standards, but for a minimal install of windows 7 it isn't sluggish, and cpu/RAM usage don't spike when roundcube is open. And the spike in http connections to the server did not happen, so I am not longer certain if that is related. Does anyone have a suggestion on how I might track the cause of this annoying popup? Or at least cause it to stop popping up all the time? -- Computerisms Bob Miller 867-334-7117 / 867-633-3760 http://computerisms.ca

1 0

Reply to own messages broken...?
by Michael Heydekamp 23 Jun '15

23 Jun '15

Hi, just did set up some mail accounts for a new user and did realize that replies to an own message are being sent to the own address of the original sender rather than to the address of the original recipient. This still works: ----------------- 1) > From: Michael Heydekamp <michael(a)mydomain.de> > Display name: Michael Heydekamp > Email: michael(a)mydomain.de This does not work: ------------------- 2) > From: Michael Heydekamp <michael(a)mydomain.de> > Display name: Michael Heydekamp xxxxxx - xxxxxxx xxx xxxxxxx > Email: michael(a)mydomain.de 3) > From: Michael Heydekamp xxxxxx - xxxxxxx xxx xxxxxxx <michael(a)mydomain.de> > Display name: Michael Heydekamp xxxxxx - xxxxxxx xxx xxxxxxx > Email: michael(a)mydomain.de 4) > From: =?UTF-8?Q?Michael_Heydekamp_xxxxxx_-_xxxxxxx_xxx_xxxxxxx?= > <michael(a)mydomain.de> > Display name: Michael Heydekamp > Email: michael(a)mydomain.de Where "Display name" and "Email" are the relevant entries under Settings/Identities, and "From:" is the From header of the message. According to Example 2) above, Roundcube seems to check for the display name as well...? IMO, it shouldn't do that and check for the address only. Example 3) is strange: Display names are identical, nonetheless the routine fails. Is the display name too long? Example 4): Not sure if folded headers are the problem here. Fix appreciated, as the user in question did already send a few messages to himself, relying on a working Reply-to-own-messages routine (and not realizing the wrong recipient address). Cheers, -- Michael Heydekamp Co-Admin freexp.de Düsseldorf/Germany

3 9

Roundcube Next is coming and we need your help!
by Thomas Bruederli 19 Jun '15

19 Jun '15

Dear subscribers What started with the hypothetical question, "how would we implement Roundcube if we could start over again?" [1], has now grown into a concrete plan how to create the responsive, fast and beautiful successor of Roundcube. It has become clear that the architectural changes necessary for this are way too big to be applied to the current Roundcube codebase without breaking the compatibility in a major way. That's why we're planning to define Roundcube One as feature complete and focus on a new core engine for the future Roundcube webmail application. In order to make than happen, we can reply on long time partners who supported Roundcube already in the past. Kolab Systems has offered to drive this project by contributing their well established software development capabilities and dedicate additional developer power to help us get the work done. In addition to that, the folks from Kolab Digital in London are going to share their expertise on the UX and design part of it. Two major goals are important to us: Besides improving the core technology and modernizing the UI, we also aim to move some of the groupware features we currently see in the Kolab suite into Roundcube itself and make them available for other backends. And we'll certainly provide a migration path to existing Roundcube installations. So to enable us to achieve these high stake goals together for Roundcube Next we proudly announce our crowdfunding campaign at Indiegogo. Go to https://roundcu.be/next and back us if you can or help us spread the word about it. Your websites, blogs and social media channels can help us reach more people. Or if you're working for, or are a customer of, an ISP who's already using Roundcube, please forward this campaign to your product manager. Let's challenge today's email and create the most awesome webmail application people deserve to communicate freely using systems and services they can trust. The next Roundcube will of course again be 100% open source and made available to everybody. This is your chance to contribute to the success of free software. Many thanks to all of our past, current and future supporters! Sincerely, The Roundcube Dev Team [1] https://roundcubeinbox.wordpress.com/2014/09/12/roundcube-next-if-we-would-…

2 1

Text signature vs. HTML signature
by Michael Heydekamp 18 Jun '15

18 Jun '15

Hi there, although I do really hate HTML messages (and their multipart/alternative incarnations, as they're most often misformatted), there's sometimes no way around it to use them. Especially if you're starting an own business and need to compose messages with HTML signatures, including a logo and this kind of stuff. So I expected Roundcube to be able to create a) a signature in plain text format for text messages, and b) an alternative signature in HTML format for HTML messages - for the same account, of course. Therefore, today I played the very first time with the toggle "HTML signature". But I really don't get what this option does (or should do). Let's say I have this plain text signature ("HTML signature" de-selected): -------------------------------- > -- > Michael Xxxxxxxxx > Tel.: +49-(0)211-xxxxxxx > Mobil: +49-(0)172-xxxxxxx > eMail: michael(a)xxxxxxxxx.de > WWW: http://www.xxxxxxxxx.de -------------------------------- If I now select the toggle "HTML signature" and de-select it again, the following plain text signature is being returned: ---------------------------------- > -- > Michael Xxxxxxxxx > Tel.: +49-(0)211-xxxxxxx > Mobil: +49-(0)172-xxxxxxx > eMail: michael(a)xxxxxxxxx.de > WWW: http://www.xxxxxxxxx.de [1] > > Links: > ------ > [1] http://www.xxxxxxxxx.de ---------------------------------- Not only that there is an IMO senseless additional link being created, also the blanks after "Tel." etc. are gone, so the contacts are not properly left-aligned anymore. If I do the same again, the following plain text signature is being returned: ------------------------------------------ > -- > Michael Xxxxxxxxx > Tel.: +49-(0)211-xxxxxxx > Mobil: +49-(0)172-xxxxxxx > eMail: michael(a)xxxxxxxxx.de > WWW: http://www.xxxxxxxxx.de [1] [1 [1]] > Links: > ------ > [1] http://www.xxxxxxxxx.de [1] > > Links: > ------ > [1] http://www.xxxxxxxxx.de ------------------------------------------ Even more senseless links! And so on... As I said, I don't get it. What's that for...? Can somebody explain? The creation of the body of HTML messages seems to even worse, but that's a different issue for a different thread then. Any help appreciated. Cheers, -- Michael Heydekamp Co-Admin freexp.de Düsseldorf/Germany

2 5

Issue with mime types
by absolutely_free＠libero.it 12 Jun '15

12 Jun '15

Hi, everytime I upgrade RC, I get this warning: WARNING: Mimetype to file extension mapping doesn't work properly! Please check the 'mime_types' config option and run this script again. My environment is: # lsb_release -a LSB Version: :base-4.0-amd64:base-4.0-noarch:core-4.0-amd64:core-4.0-noarch Distributor ID: CentOS Description: CentOS release 6.6 (Final) Release: 6.6 Codename: Final # php -v PHP 5.3.3 (cli) (built: Oct 30 2014 20:12:53) Copyright (c) 1997-2010 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies backend: MySQL web server: nginx nginx.conf: user nginx; worker_processes 2; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; <--------------- The file is present on filesystem. Thank you

1 0

Updates 1.1.2 and 1.0.6 released
by Thomas Bruederli 06 Jun '15

06 Jun '15

Dear Roundcube users We just published updates to both stable versions 1.0 and 1.1 after fixing many minor bugs and adding some security improvements to the 1.1 release branch. Version 1.0.6 comes with cherry-picked fixes from the more recent version to ensure proper long term support especially in regards of security and compatibility. The security-related fixes in particular are: - XSS vulnerability in _mbox argument - security improvement in contact photo handling - potential info disclosure from temp directory See the full changelog here: http://trac.roundcube.net/wiki/Changelog Both versions are considered stable and we recommend to update all productive installations of Roundcube with either of these versions. Download them from https://roundcube.net/download As usual, don't forget to backup your data before updating. And there's one more thing: Our crowdfunding campaign for Roundcube Next is still ongoing and has just been updated with more details of what we want to achieve. We'd much appreciate your support for this exciting new project. Please visit https://roundcu.be/next and spread the word about it.

1 0

Server Error: Unable to send command: A0009 UID EXPUNGE 18748
by Josep BSC 04 Jun '15

04 Jun '15

Hi all, I am posting here because when upgrading from RC 0.5.4 to RC 1.1.1 I am getting this error when I try to delete a message from Inbox folder, the rest works fine. Server Error: Unable to send command: A0009 UID EXPUNGE 18748 Even though the message is deleted from the mailbox, but it is quite annoying to have it there. It just weird that it happens only to the INBOX folder. With the previous version it worked fine, no error message was displayed. Dovecot : 1.2.3 Thanks a lot! -- Josep Manel Andrés (josep.andres(a)bsc.es) Operations - Barcelona Supercomputing Centre C/ Jordi Girona, 31 http://www.bsc.es 08034 Barcelona, Spain Tel: +34-93-405 42 14 e-mail: systems(a)bsc.es Fax: +34-93-413 77 21 ----------------------------------------------- WARNING / LEGAL TEXT: This message is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential, proprietary, or exempt from disclosure under applicable law. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, you are strictly prohibited from disclosing, distributing, copying, or in any way using this message. If you have received this communication in error, please notify the sender and destroy and delete any copies you may have received. http://www.bsc.es/disclaimer

2 3

Re: [RCU] Server Error: Unable to send command: A0009 UID EXPUNGE 18748
by Josep BSC 03 Jun '15

03 Jun '15

Hi Harald, I totally agree with you. But since this is only a barely used server and only accessible from within the company's facilities..... So, I assume that it is related with the Dovecot server, isn't it? Best regards. Josep On 03/06/15 14:53, Reindl Harald wrote: > > Am 03.06.2015 um 14:49 schrieb Josep BSC: >> Dovecot : 1.2.3 > > dovecot 1.x is EOL for years now > > what's the purpose of moving to the newest and greatest RC and don't > care about a likely insecure and buggy backend mailserver? > ----------------------------------------------- WARNING / LEGAL TEXT: This message is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential, proprietary, or exempt from disclosure under applicable law. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, you are strictly prohibited from disclosing, distributing, copying, or in any way using this message. If you have received this communication in error, please notify the sender and destroy and delete any copies you may have received. http://www.bsc.es/disclaimer

1 0

External AD/LDAP server address book
by Diogo Vieira 25 May '15

25 May '15

Hello, I'm trying to add an address book from an external LDAP server for one of our clients in our shared roundcube installation. From what I could tell roundcube supports this[0] but I would like to know if I can filter that address book only to appear to clients in a specific domain. Is this possible natively? In case it isn't, would it be necessary/possible to create a plugin for roundcube? [0]: at least it seems so as per the "Configuring Roundcube" section of http://trac.roundcube.net/wiki/Howto_Config/Ldap Thank you very much for your attention, -- Diogo Vieira <dfv(a)eurotux.com> Programador Eurotux Informática, S.A. | www.eurotux.com

1 0

Server Settings prefs
by list＠airstreamcomm.net 20 May '15

20 May '15

Running Roundcube 1.0.4 and we didn’t notice this for a very long time but the “Server Settings” preferences section is not visible on our install. We looked on line but could not find anything, is there some configuration option to expose this to users?

1 0

Re: [RCU] Search Via HTTP GET
by Andrew Davidson 12 May '15

12 May '15

On 2015-05-12 09:37, Reindl Harald wrote: > > read the wiki article > > CSRF is not about "verify authentication state", it is about a link > from the attacker leads in trigger a action in a web-application > *because you are authenticated* and hence there is a CRSF-token I wasn't sufficiently clear, I don't intend to scrape the data and embed it into another application. I plan to have the application redirect to RC itself, in the browser. The other application will never have access to the results of that page and it will not redirect back. Again, no different than you clicking on this link: http://www.amazon.com/s/?tag=duc0c-20&url=search-alias%3Daps&field-keywords… Your mail client will have no access to your Amazon account, but the search request will still be executed.

3 2

Re: [RCU] Search Via HTTP GET
by Andrew Davidson 12 May '15

12 May '15

On 2015-05-12 09:15, Reindl Harald wrote: > if that would work it would deserve a bugreport and a CVE because you > would bypass the > http://en.wikipedia.org/wiki/Cross-site_request_forgery protection I don't see why that would be the case. It's similar to entering https://www.google.com/?q=query+string into your browser's address bar. This wouldn't require any loss of security as RC can already verify authentication state before processing a request. For example, if you request this URL before logging in, you'll get a login page rather than the actual mailbox: https://roundcube/?_task=mail&_mbox=Archive is requested the same as if you were to request https://roundcube/?_task=mail&_mbox=Not%20Real It may not be possible with RC, but that's what I want to understand.

1 0

Search Via HTTP GET
by Andrew Davidson 12 May '15

12 May '15

I'm trying to develop an interface to roundcube and would like to pass it a search query for a specific folder. Does anyone know a proper way to do this over a HTTP GET request? I've tried these queries after viewing the headers during the AJAX search query (*string* is the URL encoded search query): https://roundcube/?_task=mail&_mbox=Archive&_action=search&_q=*string* https://roundcube/?_task=mail&_filter=ALL&_q=*string*&_mbox=Archive&_remote… Neither proved successful. Any throughts?

1 0

Signature positioning configuration
by Tristan Muzard 09 May '15

09 May '15

--- Original Language (French) --- Bonjour, Depuis hier les signatures ne se positionne plus à la suite en bas de message mais en lien avec la réponse, hors pour plein de raison nous somme nombreux à ne pas vouloir que les signatures soit en bas et les réponses au dessus des messages. Hors cette configuration n'est pas personnalisable. Je reste à votre dispo pour plus d'info. Cordialement. --- Auto-Translate : --- Hello, Since yesterday the signatures is positioned more as a result at the bottom of the message, but in connection with the answer, except for a lot of money because many of us do not want that signatures is down and the responses to the above messages. Excluding this configuration is not customizable. I remain at your avail for more info. Sincerely. -- Tristan

2 2

problem withSENDER and reply-to EMAILS.
by Rad Koi 07 May '15

07 May '15

Please, can anybody help me configure my email identity settings? My friend can receive emails to his webmail identy without filling in his REPLY-TO. For me I've tried asking him but he is selfish and would not like to tecah me. How do I receive messages to my webmail id if my SENDER EMAIL is added and no REPLY-TO?Thanks.

2 1

Join us at the Kolab Summit in The Hague
by Thomas Bruederli 01 May '15

01 May '15

Dear Roundcube users and affiliates The Roundcube development team gathers this weekend in The Hague at the first Kolab Summit. If you can make it there, we'd love to meet you in person and talk to you about the future of Roundcube. More information about the event and the location can be found here: https://conference.kolab.org Kind regards, Thomas

1 0

is it possible to disable use_secure_urls for some pages?
by martijn.list 30 Apr '15

30 Apr '15

Hi, Enabling use_secure_urls has some side effects which I'm looking at how to solve. For example, a user might have defined a bookmark to the RC login page (www.example.com/webmail/). This works find just as long as the user is not yet logged in. However if the user is already logged in and the user wants to check whether there is any new mail and therefore clicks the bookmark, an error page with "Access to this service was denied due to failing security checks!" is shown. The user should then click the "click here to try again" link which will redo the request but now with the correct token in the URL. Since the GET request is redone but now with the correct token added, to me it looks like checking the URL token for GET requests will not bring additional security because if the user clicks the "click here to try again" link, the request will be done anyway. Is it possible to disable the secure URL check for certain pages and/or requests? Perhaps with a plugin? or is it all or nothing? Kind regards, Martijn Brinkers

2 3

- Comparing roundcube vs OpenWebMail
by webmaster 29 Apr '15

29 Apr '15

I am examining the features and benefits of roundbox webmail. Since I have 7 years of mailboxes using OpenWebMail, another webmail, I have to take the decision if it is worth to migrate to roundcube now that I am contracting a different VPS with 1&1. First, if all my Sendmail mailserver OpenWebMail mailboxes contents Inbox, Sentmail, etc, can be read by roundcube or not. Second, compare the features of each one. OpenWebMail has tons of features, webdisk, multilanguage, customization, etc. and so does roundcube, so is there someone who knows OpenWebMail and can assist in comparing both? Much obliged !

2 1

Plugin markasfilter
by Renata Dias 27 Apr '15

27 Apr '15

Hello all, I recently installed the RoundCube and add the plugin "markasjunk", but, how we know, this just move the message to Spam/Junk folder. I know that exist "markasjunk2" that is possible configure SpamAssassin AutoLearn, but I can't reconfigure SpamAssassin righnow. I just need a plugin that create a new filter every time user click "mark as junk". Can anyone help me? Tks. -- Renata Dias

1 0

SourceForge RackHunter protection is still recommended ?
by webmaster 25 Apr '15

25 Apr '15

I wonder if http://rkhunter.sourceforge.net/ is still recommended to be installed as a security measure on servers. Since SourceForge is behind roundcube, I assumed this could be asked here. If not, kindly advise where to ask about rkhunter last version for Linux server. Thanks

2 1

Plugin Junk+Filter
by Renata Dias 23 Apr '15

23 Apr '15

Hello all, I recently installed the RoundCube and add the plugin "markasjunk", but, how we know, this just move the message to Spam/Junk folder. I know that exist "markasjunk2" that is possible configure SpamAssassin AutoLearn, but I can't reconfigure SpamAssassin righnow. I just need a plugin that create a new filter every time user click "mark as junk". Can anyone help me? Tks. -- Renata Dias

1 0

Plugin Spam/Junk + Filter
by Renata Dias 22 Apr '15

22 Apr '15

Hello all, I recently installed the RoundCube and add the plugin "markasjunk", but, how we know, this just move the message to Spam/Junk folder. I know that exist "markasjunk2" that is possible configure SpamAssassin AutoLearn, but I can't reconfigure SpamAssassin righnow. I just need a plugin that create a new filter every time user click "mark as junk". Can anyone help me? Tks. -- Renata Dias

1 0

[contacts]: LDAP contacts addition does not seems to handle variables
by Charlie Mordant 17 Apr '15

17 Apr '15

Hi Roundcube experts! We've got an ldap structure like this one {{{ dc=tld,dc=dn,ou=people,ou=company,uid=foo dc=tld,dc=dn,ou=people,ou=contacts,ou=foo,cn=foocontact1 dc=tld,dc=dn,ou=specialUser,cn=contactWriter }}} With the following roundcube configuration for contacts (company ldap is another one), we're using this configuration: {{{ $rcmail_config['ldap_public']['Personal'] = array( 'name' => 'Personal', 'hosts' => array('<% if @dirsrvprefix %><%= @dirsrvprefix %>.<% end %><%= @dn %>.<%= @tld %>'), 'port' => 389, 'use_tls' => false, 'ldap_version' => 3, // using LDAPv3 'network_timeout' => 10, // The timeout (in seconds) for connect + bind arrempts. This is only supported in PHP >= 5.3.0 with OpenLDAP 2.x 'user_specific' => false, // If true the base_dn, bind_dn and bind_pass default to the user's IMAP login. 'base_dn' => 'ou=%u,ou=contacts,ou=people,dc=<%= @dn %>,dc=<%= @tld %>',// 'bind_dn' => 'cn=<%= @contactSO %>,ou=Special users,dc=<%= @dn %>,dc=<%= @tld %>', 'bind_pass' => '<%= @contactSOPwd %>', 'search_base_dn' => 'ou=%u,ou=<%= @contactOu %>,ou=people,dc=<%= @dn %>,dc=<%= @tld %>', 'search_filter' => '(objectClass=inetOrgPerson)', (uid=%u))' 'search_bind_dn' => 'cn=<%= @contactSO %>,ou=Special users,dc=<%= @dn %>,dc=<%= @tld %>', 'search_bind_pw' => '<%= @contactSOPwd %>', 'hidden' => false, 'searchonly' => false, 'writable' => true, 'LDAP_Object_Classes' => array('top', 'person','organizationalPerson','inetOrgPerson'), 'LDAP_rdn' => 'cn', 'required_fields' => array('cn', 'sn', 'mail'), 'search_fields' => array('mail', 'sn', 'cn'), // fields to search in 'fieldmap' => array( 'name' => 'givenName', 'surname' => 'sn', 'firstname' => 'cn', 'email' => 'mail', ), ), 'sort' => 'cn', // The field to sort the listing by. 'scope' => 'sub', // search mode: sub|base|list 'filter' => '(objectClass=inetOrgPerson)', // used for basic listing (if not empty) and will be &'d with search queries. example: status=act 'fuzzy_search' => true, // server allows wildcard search 'vlv' => false, // Enable Virtual List View to more efficiently fetch paginated data (if server supports it) 'sizelimit' => '0', // Enables you to limit the count of entries fetched. Setting this to 0 means no limit. 'timelimit' => '0', // Sets the number of seconds how long is spend on the search. Setting this to 0 means no limit. 'referrals' => false, ); }}} With this configuration, we'll hope that creating a new 'foocontact1' via the GUI while logging with 'foo' would add it as dc=tld,dc=dn,ou=people,ou=contacts,ou=foo,cn=foocontact1, and that search for this user will only resolve entries that are located in dc=tld,dc=dn,ou=people,ou=contacts,ou=foo Unfortunately, using roundcube V 0.9.5-1.fc19 , entries are not created, and the log seems to show that {{{ %u }}} doesn't seem to be resolved while adding or searching: {{{ [12-Apr-2015 17:28:44 +0000]: S: OK [12-Apr-2015 17:28:44 +0000]: C: Bind [dn: cn=roundcubeContactsWriter,ou=Special Users,dc=osgiliath.is-a-chef,dc=net] [pass: MyUltraProtectedRouncubeLdapContactsPassword] [12-Apr-2015 17:28:44 +0000]: S: OK [12-Apr-2015 17:28:44 +0000]: C: Close [12-Apr-2015 17:28:51 +0000]: C: Connect [ contacts.osgiliath.is-a-chef.net:389] [Personal] [12-Apr-2015 17:28:51 +0000]: S: OK [12-Apr-2015 17:28:51 +0000]: C: Bind [dn: cn=roundcubeContactsWriter,ou=Special Users,dc=osgiliath.is-a-chef,dc=net] [pass: MyUltraProtectedRouncubeLdapContactsPassword] [12-Apr-2015 17:28:51 +0000]: S: OK [12-Apr-2015 17:28:51 +0000]: C: Search [(&(objectClass=inetOrgPerson)(|(mail=aa(a)aa.a)))][dn: ou=%u,ou=contacts,ou=people,dc=osgiliath.is-a-chef,dc=net] [12-Apr-2015 17:28:51 +0000]: S: No such object [12-Apr-2015 17:28:51 +0000]: C: Search [(&(objectClass=inetOrgPerson)(|(mail=aa(a)aa.a)))][dn: ou=%u,ou=contacts,ou=people,dc=osgiliath.is-a-chef,dc=net] [12-Apr-2015 17:28:51 +0000]: S: No such object [12-Apr-2015 17:28:51 +0000]: C: Add [dn: cn=aa,ou=%u,ou=contacts,ou=people,dc=osgiliath.is-a-chef,dc=net]: Array ( [givenname] => aa aa [sn] => aa [cn] => aa [mail] => aa(a)aa.a [objectClass] => Array ( [0] => top [1] => person [2] => organizationalPerson [3] => inetOrgPerson ) ) }}} Regards, -- Charlie Mordant Full OSGI/EE stack made with Karaf: https://github.com/OsgiliathEnterprise/net.osgiliath.parent

2 1

Multiserver Dropdown List didn't work (v 1.1.1)
by alexander.rehbein＠fmex.de 08 Apr '15

08 Apr '15

Hello, I've setup Roundcube 1.1.1 on an server with PHP 5.6. In my config file I defined an array with two server. But I didn't get a dropdown list on the login page. $config['default_host'] = array ( 'ssl://server1:993', 'tls://server2:143' ); Has anyone an idea what is wrong or did this function changed in Version 1.1? Greetings Alexander Rehbein

2 1

password plugin: bug in the vpopmaild driver
by Roberto Puzzanghera 31 Mar '15

31 Mar '15

Hello, in the password plugin of the latest roundcubemail-1.1.1 the change password connection is not working because of an error, causing a "$addr cannot be empty ()" error in my log. The file drivers/vpopmaild.php has to patched in this way - $result = $vpopmaild->connect($hostname, $port, null); + $result = $vpopmaild->connect($host, $port, null); at the beginning of the save() method. regards Roberto

1 0

Roundcube Special Folders in Dovecot
by Matthias Radmüller 24 Mar '15

24 Mar '15

Hello, I've configured XLIST and the Namespace in my Dovecot Server. In the Roundcube settings it is possible to define the Special Folder List. Is ist possible to configure Dovecot that the Special Folders set up with Roundcube are also marked when performing a IMAP List Request? Thanks

1 0

Update 1.1.1 released
by Thomas Bruederli 19 Mar '15

19 Mar '15

Dear Roundcube users We're proud to announce the first service release to the stable version 1.1 of Roundcube webmail. It contains some important bug fixes and improvements in error handling as well as a few new features and configuration options. See the full Changelog here: http://trac.roundcube.net/wiki/Changelog It's considered stable and we recommend to update all productive installations of Roundcube with this version. Download it from http://roundcube.net/download. And remember: backup before you update! Kind regards, Thomas

1 0

Connection to storage server failed
by Robert Moskowitz 18 Mar '15

18 Mar '15

My one active Roundcubemail user started getting this message recently and of course cannot access his mail. So I googled it and landed at: http://help.directadmin.com/item.php?id=473 I did the process of deleting his dovecot files. My directory layout is different, everything is under /home/vmail/doman/user/ Still cannot log in, and now no dovecot files (btw, I tested this with one of my accounts that uses Thunderbird for imap connections and new dovecot files were built). I read on down the suggestions, but am not finding anything. I can't really tell about the password problem, as I use mysql for the password. Any suggestions of how to fix this?

1 1

Problem running the calendar sql-command
by T. Ermlich 18 Mar '15

18 Mar '15

Hello, some days ago I did a cleam installation of Roundcube, as offered I downloaded version 1.1.0. Installation went well, Roundcube is working as intended. Yesterday I installed calendar-plugin, an run: mysql -u root -p roundcubemail < /var/lib/roundcube/plugins/calendar/drivers/database/SQL/mysql.initial.sql After typing the password I get: ERROR 1064 (42000) at line 26: You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near 'tinyint(1) NOT NULL DEFAULT '0', `created` datetime NOT NULL DEFAULT '1000-01-' at line 7 Is there a problem with the SQL-code, or is this a problem with MariaDB? Thaanks a lot! Cheers, Torsten

3 4

Can't install Kolab plugins
by russell＠zeropointnetworks.com 11 Mar '15

11 Mar '15

Hi I'm trying to install the Kolab calendar plugin using Composer, but getting the following error. I'm able to download other plugins (I've downloaded roundcube/carddav and johndoh/globaladdressbook). Is anyone able to help? I'm using Roundcube 1.0.5 from Bitnami. Loading composer repositories with package information Updating dependencies (including require-dev) - Installing kolab/libcalendaring (dev-master 55bbb2c) Cloning 55bbb2c063a57c130fd1d38ee47ef14c5b983f6a [RuntimeException] Failed to execute git clone --no-checkout 'git://gitorious.org/kolab-roundcube-plugins/libcalendaring.git' '/opt/roundcube-1.0.5-0/apps /roundcube/htdocs/plugins/libcalendaring' && cd '/opt/roundcube-1.0.5-0/apps/roundcube/htdocs/plugins/libcalendaring' && git remote add composer 'git://gitorious.org/kolab-roundcube-plugins/libcalendaring.git' && git fetch composer Cloning into '/opt/roundcube-1.0.5-0/apps/roundcube/htdocs/plugins/libcalendaring'... fatal: Could not read from remote repository. Please make sure you have the correct access rights and the repository exists. update [--prefer-source] [--prefer-dist] [--dry-run] [--dev] [--no-dev] [--lock] [--no-plugins] [--no-custom-installers] [--no-autoloader] [--no-scripts] [--no-progress] [--with-dependencies] [-v|vv|vvv|--verbose] [-o|--optimize-autoloader] [--ignore-platform-reqs] [--prefer-stable] [--prefer-lowest] [packages1] ... [packagesN] Kind regards Russell Hurren Managing Director Zero Point Networks PTY LTD

3 3

Embedding roundcube UI into AngularJS application
by Pavel Zubkou 09 Mar '15

09 Mar '15

Hello, I am about to integrate roundcube with existing CRM application we develop. Other than creating plugins for server side and client side, I plan to embed roundcube inline into existing application build on AngularJS. The plan is to embed roundcube UI into AngularJS app using an iframe element: 1) Configure roundcube to render only email related UI, without "chrome" elements, i.e. header and footer. 2) Apply our styling to all roundcube UI, using a plugin. 3) Implement plugins allowing to add UI elements and behaviour to roundcube UI for quick interaction with our CRM using postMessage API. The goal is to create smooth integration allowing users to work with email and CRM information at the same time. Could fellow users please help me understand the issues I am about to face or point me to relevant documentation or source code. Thanks for help! -- With best regards, Pavel Zubkou.

1 0

CARDDAV unknown SSL error
by Leonardo Arena 04 Mar '15

04 Mar '15

Hi list, I've recently upgraded to PHP 5.6 and this problem has shown up: roundcube: cdfopen: Could not open: 0 could not connect to the host " myhost.mydomain.me": stream_socket_client(): unable to connect to ssl:// 127.0.0.1:443 (Unknown error) I've loaded the CA file into "openssl.cafile" php.ini but no workey. Could anybody shed some light on the nature of the error, or at least how to get more debugging info in order to fix it? I'm using RC 1.0.4 Thanks! - leo

3 5

Error in DDL upgrade while upgrading from 0.9.5 to 1.0.5
by Roderick Johnstone 26 Feb '15

26 Feb '15

Hi On upgrading to roundcube 1.0.5 from 0.9.5 using installto.sh I got: Executing database schema update. PHP Warning: Directive 'magic_quotes_gpc' is deprecated in PHP 5.3 and greater in Unknown on line 0 Updating database schema (2013042700)... [OK] Updating database schema (2013052500)... [OK] Updating database schema (2013061000)... [FAILED] ERROR: Error in DDL upgrade 2013061000: [7] ERROR: relation "cache_index" does not existAll done. This is with a postgres database. How can I fix this please? Thanks Roderick Johnstone

2 3

Re: [RCU] Fileino, Mcrypt, Exif
by Dan Langille 23 Feb '15

23 Feb '15

> On Feb 22, 2015, at 3:10 PM, Reindl Harald <h.reindl(a)thelounge.net> wrote: > > > Am 22.02.2015 um 21:02 schrieb Dan Langille: >> The next couple of extensions are optional and recommended to get the best performance: >> >> FileInfo: NOT AVAILABLE(Could be loaded. Please add in php.ini; See http://www.php.net/manual/en/book.fileinfo.php) >> Libiconv: OK >> Multibyte: OK >> OpenSSL: OK >> Mcrypt: NOT AVAILABLE(Could be loaded. Please add in php.ini; See http://www.php.net/manual/en/book.mcrypt.php) >> Intl: OK >> Exif: NOT AVAILABLE(Could be loaded. Please add in php.ini; See http://www.php.net/manual/en/book.exif.php) >> ### >> >> The link provided for Fileinfo has "This extension has no configuration directives defined in php.ini." (when you dig into the links on the first page) >> >> I know I have these installed: >> >> php55-fileinfo-5.5.21 >> libmcrypt-2.5.8_2 >> php55-mcrypt-5.5.21_1 >> php55-exif-5.5.21 >> >> Could someone please indicate what php.ini entries are necessary to get those extensions to work? > > are the extension *enabled* and not only installed somewhere? > "php -m" is your friend i see them listed. What's up with that? # php -m [PHP Modules] bcmath Core ctype date dom ereg exif fileinfo filter gd hash iconv intl json libxml mbstring mcrypt mhash mysql mysqlnd openssl pcre PDO pdo_sqlite pgsql Phar posix pspell Reflection session SimpleXML SPL standard tokenizer xml xmlreader xmlwriter Zend OPcache zip [Zend Modules] Zend OPcache > extension = "fileinfo.so" > extension = "mcrypt.so" > extnesion = "exif.so" Adding those to php.ini doesn't help. FYI, FreeBSD 9.3 here. — Dan Langille http://langille.org/

3 9

Fileino, Mcrypt, Exif
by Dan Langille 23 Feb '15

23 Feb '15

The 'Roundcube Webmail Installer' says: ### The next couple of extensions are optional and recommended to get the best performance: FileInfo: NOT AVAILABLE(Could be loaded. Please add in php.ini; See http://www.php.net/manual/en/book.fileinfo.php) Libiconv: OK Multibyte: OK OpenSSL: OK Mcrypt: NOT AVAILABLE(Could be loaded. Please add in php.ini; See http://www.php.net/manual/en/book.mcrypt.php) Intl: OK Exif: NOT AVAILABLE(Could be loaded. Please add in php.ini; See http://www.php.net/manual/en/book.exif.php) ### The link provided for Fileinfo has "This extension has no configuration directives defined in php.ini." (when you dig into the links on the first page) I know I have these installed: php55-fileinfo-5.5.21 libmcrypt-2.5.8_2 php55-mcrypt-5.5.21_1 php55-exif-5.5.21 Could someone please indicate what php.ini entries are necessary to get those extensions to work? — Dan Langille http://langille.org/

1 0

R: Re: Auto subscribe IMAP folder
by absolutely_free＠libero.it 20 Feb '15

20 Feb '15

Sorry, I tried with: >$config['imap_force_lsub'] = true; >$config['imap_force_ns'] = true; but without success; is there a way to obtain automatic imap-folder subscription in RC (1.0.5)? My server mail is Dovecot (on cPanel server) Thank you >----Messaggio originale---- >Da: roundcube-users(a)whyaskwhy.org >Data: 15/11/2014 1.34 >A: <users(a)lists.roundcube.net> >Ogg: Re: [RCU] Auto subscribe IMAP folder > >On 11/7/2014 6:30 AM, absolutely_free(a)libero.it wrote: >> Hi, >> >> I created at file system level a custom folder "Archive" in every Maildir. > >What IMAP server software do you use? If you use Dovecot it can create those >custom folders for you. I think with 2.0.x it was through a separate plugin, >with 2.2.x it comes built-in. > >http://wiki2.dovecot.org/Plugins/Autocreate >http://wiki2.dovecot.org/MailboxSettings > >> Is there a way to let RC auto-suscribe those new folders? >> >> I put this in defaults.inc.php > > >It may have the same effect, but I think you're supposed to put your custom options > in config.inc.php. Of course I may have a different version than you. > >> >> $config['default_folders'] = array('INBOX', 'Drafts', 'Sent', 'Junk', >> 'Trash', 'Archive'); >> $config['create_default_folders'] = true; >> >> But this works only for NEW users (never logged in) have Archive folder >> already subscribed. > >I grepped through defaults.inc.php on my installation and found this: > > >// By default list of subscribed folders is determined using LIST-EXTENDED >// extension if available. Some servers (dovecot 1.x) returns wrong results >// for shared namespaces in this case. http://trac.roundcube. net/ticket/1486225 >// Enable this option to force LSUB command usage instead. >// Deprecated: Use imap_disabled_caps = array('LIST-EXTENDED') >$config['imap_force_lsub'] = false; > >// Some server configurations (e.g. Courier) doesn't list folders in all namespaces >// Enable this option to force listing of folders in all namespaces >$config['imap_force_ns'] = false; > > >Perhaps that last one would be of help? >_______________________________________________ >Roundcube Users mailing list >users(a)lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users >

1 0

Re: [RCU] Point of information
by Oliver Welter 20 Feb '15

20 Feb '15

Use Mail encryption, anything else is snakeoil as there are lots of possibilities for others to get into your mail. Oliver Von Samsung-Tablet gesendet -------- Ursprüngliche Nachricht -------- Von: jfmxl <jfmxl(a)SDF.ORG> Datum: 18.02.2015 02:40 (GMT+01:00) An: Roundcube Users mailing list <users(a)lists.roundcube.net> Betreff: Re: [RCU] Point of information I'll look into it. Although I have little to no money and no means of paying for anything other than by international money order if I went for this. I had a vps with ... what turned out to be viaverio, after several rounds of merger ... for twenty years. But I never trusted them ... once it occurred to me to consider whether I did or not. Then I could no longer afford them, or pay them in any case, anyway. Why should I trust FileMedia? If I could afford them. I'll try to look them up. What I have now is a shell account and limited webserver, and mail as described, from this outfit, for a one-time fee of one dollar. I bought a buck and mailed it to him/them. I asked lots of questions, like are you the NSA? Got zero answers. I have to assume it's an NSA honeypot. But so may FileMedia be. Well not a honeypot, but a 'cooperative' commercial provider as are Google and the rest. At least the NSA won't bother to sell me out to the TNCs ... the sell-out traffic is all in the other direction. Maybe there's a way to run mail over i2p myself. I had a mail account there ... still based on trust ... but one day they just just me down. No notice, no nothing. They're a pretty arbitrary bunch of geek gatekeepers. And there's still the connection to the 'real' darpanet to negotiate. Oh well, there is no such thing as privacy, certainly not security, any longer in this web worldwide. I might as well stick with what I have. With those bastards from the NSA looking over my shoulder. collecting everything I do on the web 'for future reference'. At least with the NSA I'm not commercially compromised. Not so with Google. On 2015-02-18 07:59, Noel Butler wrote: > Then get that unmanaged VPS, you will control it, although since it's > not located locally there still exists a small risk, I use FileMedia > for my personal offsite, reliable, and friendly service, you can then > pop3 from it, keeping bulk of your mail local, and since you'd only > need it for light storage, you could get away with the smallest plan, > you wont need bells and whistles. > > On 18/02/2015 10:17, jfmxl wrote: > >> Thanks for the advice. I tried to run my own mail server, tried >> dynamic dns, but my ISP won't allow it, apparently. Couldn't make a >> connection to an smtp port. > > _______________________________________________ > Roundcube Users mailing list > users(a)lists.roundcube.net > http://lists.roundcube.net/mailman/listinfo/users _______________________________________________ Roundcube Users mailing list users(a)lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users

3 5

Point of information
by jfmxl 18 Feb '15

18 Feb '15

Here's a question. I like the idea of pop mail. My mail program downloads my mail from my mail server and that's it. The mail is deleted from my mail server. With webmail, my mail server has all my mail forever, for easy reading at their leisure. Now I realize that there is no longer any trust in this world, that the NSA has long since destroyed all that, betrayed us all, and that the internet is actually no more than a spy platform now rather than the glorious enabler of freedom that we, I anyway, foolishly thought it was ... that darpa played us all for fools. Still ... What I do now is set my mail reading program to retrieve my mail from my mail provider, save what I want locally using my mail reading program, then use round cube to answer what I want to answer and move all the mail to the trash before exiting. I have to use round cube to answer my mail because my provider offers only imap and does not allow me to send imap mail except through its round cube. For all I know sdf.org is operated by th NSA. I asked, got no response. So how do I know my mail is really being deleted at my mail provider's server. Google never ever deletes mail. The only one who loses access to deleted google mail is the person to whom it is addressed. I assume the same is true of round cube mail? That my email provider retains copies of all my mail, and the only who loses access to it is myself when I delete it? I also realize that my provider could simply copy all my pop3 mail on receipt ... but at least that is a overt dirty filthy trick. It seems to be a 'feature' of webmail?

2 4

Turn off addressee autocomplete on a per-user basis
by Kevin Buckley 18 Feb '15

18 Feb '15

I've recently been exposed to a Roundcude installation that's being trialled. Because some of the other people who will be using it desire autocomplete capability, the installation has two lisst of Contact info enabled by default, a personall address book and another which is a local LDAP server. I can't seem to remove that LDAP addressbook entry from my list of Contacts, or at least toggle it on/off. I am actually wanting to turn off autocomplete altogether but removing the things that allow autocomplete to function seemed like a good place to start. I'd also like, when having typed the username of someone in the default domain into the To: list NOT to have Roundcube tell me that I need at least one recipient when I know I already have one. Any clues?

1 0

mailto: from firefox
by jfmxl 18 Feb '15

18 Feb '15

Hi, I'd like to be able to click on a mailto: link in firefox (iceweasel) and have it handled in another tabe by the round cube that handles my mail account. I didn't see a way to add another webmail client in firefox 31.4.0, so I typed about:config in the location box and searched for mailto:, and found the entries for yahoo and gmail. Since I have no gmail account I overwrote the name and uri there, specifying the uri I use for round cube on my account. But nothing happened. Yahoo and Gmail still show up under Edit | Preferences | Applications | mailto:, although about:config does show gmail gone and my mail provider's uri in its place. As well, Yahoo and Gmail had other stuff in the uri to reflect composition mode and the address to send to. How do I invoke round cube from firefox passing the to address and starting a compose session? Thanks.

3 7

Error upgrading to 1.1.0
by Luciano Mannucci 13 Feb '15

13 Feb '15

Launching ./bin/installto.sh $target I get: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php5/extensions/pdo_mysql.so' - /usr/lib64/php5/extensions/pdo_mysql.so: cannot open shared object file: No such file or directory in Unknown on line 0 PHP Fatal error: Cannot redeclare mb_strlen() (previously declared in /usr/src/local/www/roundcube/roundcubemail-1.1.0/program/lib/Roundcube/bootstrap.php:374) in /usr/src/local/www/roundcube/roundcubemail-1.1.0/vendor/patchwork/utf8/class/Patchwork/Utf8/Bootup/mbstring.php on line 32 php --version says: PHP 5.3.17 (cli) Copyright (c) 1997-2012 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2012 Zend Technologies What did I do wrong? Cheers, Luciano. -- /"\ /Via A. Salaino, 7 - 20144 Milano (Italy) \ / ASCII RIBBON CAMPAIGN / PHONE : +39 2 485781 FAX: +39 2 48578250 X AGAINST HTML MAIL / E-MAIL: posthamster(a)sublink.sublink.ORG / \ AND POSTINGS / WWW: http://www.lesassaie.IT/

12 18

Re: [RCU] users Digest, Vol 92, Issue 8
by mobin＠origamitechnologies.com 12 Feb '15

12 Feb '15

On 2015-02-11 09:22, users-request(a)lists.roundcube.net wrote: > Send users mailing list submissions to > users(a)lists.roundcube.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.roundcube.net/mailman/listinfo/users > or, via email, send a message with subject or body 'help' to > users-request(a)lists.roundcube.net > > You can reach the person managing the list at > users-owner(a)lists.roundcube.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of users digest..." > > > Today's Topics: > > 1. After upgrading to 1.1.0 - plugin legacy_browser (Ivan Juri?i?) > 2. Re: After upgrading to 1.1.0 - plugin legacy_browser (Egbert) > 3. Re: After upgrading to 1.1.0 - plugin legacy_browser > (Ivan Juri?i?) > 4. Re: After upgrading to 1.1.0 - plugin legacy_browser > (Noel Butler) > 5. Re: After upgrading to 1.1.0 - plugin legacy_browser (deoren) > 6. Re: After upgrading to 1.1.0 - plugin legacy_browser (barul) > 7. Errors after upgrading to 1.1.0 - Class "PEAR" not found and > Class "Mail_mime" not found (deoren) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 11 Feb 2015 12:38:33 +0100 > From: Ivan Juri?i? <ivan(a)jurisic.org> > To: Roundcube Users mailing list <users(a)lists.roundcube.net> > Subject: [RCU] After upgrading to 1.1.0 - plugin legacy_browser > Message-ID: <54DB3F39.4000203(a)jurisic.org> > Content-Type: text/plain; charset=UTF-8; format=flowed > > Hello to all, > > I upgrade roundcube 1.0.3 to 1.1.0 and lost support for old internet > browsers Internet explorer 8, but I find plugin "legacy_browser" with > support to Internet explorer 8. > > On first look all work perfect, except for users witch have in > Settings->Mailbox View->Show preview pane set off. > > Problem is when trying double click on message , message is not open. > On > Firefox all works ok. > > > Ivan > > > > ------------------------------ > > Message: 2 > Date: Wed, 11 Feb 2015 12:46:50 +0100 > From: Egbert <egbert(a)vandenbussche.nl> > To: users(a)lists.roundcube.net > Subject: Re: [RCU] After upgrading to 1.1.0 - plugin legacy_browser > Message-ID: <54DB412A.8080806(a)vandenbussche.nl> > Content-Type: text/plain; charset=UTF-8 > > Isn't it time to start using a supported browser? > > Just my 2 $c > Egbert Jan, NL > > Ivan Juri?i? schreef op 11-2-2015 om 12:38: >> Hello to all, >> >> I upgrade roundcube 1.0.3 to 1.1.0 and lost support for old internet >> browsers Internet explorer 8, but I find plugin "legacy_browser" with >> support to Internet explorer 8. >> >> On first look all work perfect, except for users witch have in >> Settings->Mailbox View->Show preview pane set off. >> >> Problem is when trying double click on message , message is not open. >> On Firefox all works ok. >> >> >> Ivan >> >> _______________________________________________ >> Roundcube Users mailing list >> users(a)lists.roundcube.net >> http://lists.roundcube.net/mailman/listinfo/users > > > > ------------------------------ > > Message: 3 > Date: Wed, 11 Feb 2015 13:37:10 +0100 > From: Ivan Juri?i? <ivan(a)jurisic.org> > To: users(a)lists.roundcube.net > Subject: Re: [RCU] After upgrading to 1.1.0 - plugin legacy_browser > Message-ID: <54DB4CF6.9050202(a)jurisic.org> > Content-Type: text/plain; charset="utf-8"; Format="flowed" > > Egbert, That not depend on me. > > Sure I will love to users have new version of IE. > > > On 02/11/2015 12:46 PM, Egbert wrote: >> Isn't it time to start using a supported browser? >> >> Just my 2 $c >> Egbert Jan, NL >> >> Ivan Juri?i? schreef op 11-2-2015 om 12:38: >>> Hello to all, >>> >>> I upgrade roundcube 1.0.3 to 1.1.0 and lost support for old internet >>> browsers Internet explorer 8, but I find plugin "legacy_browser" with >>> support to Internet explorer 8. >>> >>> On first look all work perfect, except for users witch have in >>> Settings->Mailbox View->Show preview pane set off. >>> >>> Problem is when trying double click on message , message is not open. >>> On Firefox all works ok. >>> >>> >>> Ivan >>> >>> _______________________________________________ >>> Roundcube Users mailing list >>> users(a)lists.roundcube.net >>> http://lists.roundcube.net/mailman/listinfo/users >> _______________________________________________ >> Roundcube Users mailing list >> users(a)lists.roundcube.net >> http://lists.roundcube.net/mailman/listinfo/users > > >

1 0

Errors after upgrading to 1.1.0 - Class "PEAR" not found and Class "Mail_mime" not found
by deoren 12 Feb '15

12 Feb '15

Hi, Thanks in advance for reading this. --- Prior to upgrading to 1.1.0 my Roundcube 1.0.5 installation (Ubuntu 12.04 LTS) worked just fine. When I went to run the bin/update.sh command like so: bin/update.sh --package roundcube --version=1.1 --dir=./SQL I received this error: PHP Fatal error: Class 'PEAR' not found in /var/www/roundcubemail/program/lib/Roundcube/bootstrap.php on line 100 I checked and found mention of php-pear in this official installation guide: http://trac.roundcube.net/wiki/Howto_Install I installed that package and was then able to successfully complete the db schema upgrade process. Later when I attempted to respond to an email the "Sending message..." note stayed on screen much longer than expected. I looked in the error logs and found this message: roundcube: PHP Fatal error: Class 'Mail_mime' not found in /var/www/roundcubemail/program/steps/mail/sendmail.inc on line 362 I looked through all three guides and did not find mention of "mime": * http://trac.roundcube.net/wiki/Howto_Install * http://trac.roundcube.net/wiki/Howto_Upgrade * http://trac.roundcube.net/wiki/Howto_Requirements nor did I find instructions telling me to use PEAR to install any modules. I did see mention of Composer, but the guides above made no reference to it that I could find. On the getcomposer.org site I looked at the "Using Composer" section: https://getcomposer.org/doc/00-intro.md#using-composer which suggested running: php composer.phar install but I did not find a composer.phar file. I did find a composer.json-dist file, but no references to composer.json or composer.json-ist in the documentation (aside from some rewrite rules blocking direct access). Are there missing steps in the directions?

2 1

smtp error
by mobin＠origamitechnologies.com 11 Feb '15

11 Feb '15

Dear Sir, We have installed roundcube mail client on our server and it was working fine earlier.Now we can't send mail to other mail servers like gmail,yahoo,etc... While sending mail other than our mail server we are getting error message SMTP Error (550): Failed to add recipient "arjunaju108(a)gmail.com" (Please turn on SMTP Authentication in your mail client, or login to the IMAP/POP3 server before sending your message. (email.origamitechnologies.com) [192.254.190.128]:41201 is not permitted to relay through this server without authentication.) How can we resolve this issue.Please help us to resolve this issue Mobin TM Origami Technologies

4 3

Roundcube Webmail 1.1.0 released
by Thomas Bruederli 10 Feb '15

10 Feb '15

Dear subscribers We’re proud to announce the arrival of the next major version 1.1.0 of Roundcube webmail which is now available for download. With this milestone we introduce new features since version 1.0 as well as some clean-up with the 3rd party libraries: - Allow searching across multiple folders - Improved support for screen readers and assistive technology using WCAG 2.0 andWAI ARIA standards - Update to TinyMCE 4.1 to support images in HTML signatures (copy & paste) - Added namespace filter and folder searching in folder manager - New config option to disable UI elements/actions - Stronger password encryption using OpenSSL - Support for the IMAP SPECIAL-USE extension - Support for Oracle as database backend - Manage 3rd party libs with Composer In addition to that, we added some new features to improve protection against possible but yet unknown CSRF attacks - thanks to the help of Kolab Systems who supplied the concept and development resources for this. Although the new security features are yet experimental and disabled by default, our wiki describes how to enable the Secure URLs [1] and give it a try. And of course, this new version also includes all patches for reported CSRF and XSS vulnerabilities previously released in the 1.0.x series. IMPORTANT: with the 1.1.x series, we drop support for PHP < 5.3.7 and Internet Explorer < 9. IE7/IE8 support can be restored by enabling the ‘legacy_browser’ plugin which is part of the default package. See the complete changelog at http://trac.roundcube.net/wiki/Changelog and download the new packages from http://roundcube.net/download. The download packages come in two flavors: "dependent", which requires the manual installation of 3rd party libs using Composer and "complete", with all the required libraries already packed into the vendor directory and ready to run. Best, Thomas [1] http://trac.roundcube.net/wiki/Howto_Config/Secure_URLs

1 0

DATABASE ERROR: CONNECTION FAILED
by ɹןʇnqן 08 Feb '15

08 Feb '15

After installing RC $CURRENT and going through the installation, I get DATABASE ERROR: CONNECTION FAILED on loading the main RC page. Installer steps: Check environmentCreate configTest config Checking PHP version Version: OK(PHP 5.4.17 detected) - - - > (this is odd. php 5.5 is installed) could there be a separate install of 5.4? $ more /usr/local/etc/php.conf PHP_VER=55 PHP_VERSION=5.5.21 PHP_SAPI=cli fpm PHP_EXT_INC=pcre spl - - - > continuing… Checking PHP extensions The following modules/extensions are required to run Roundcube: PCRE: OK DOM: OK Session: OK XML: OK JSON: OK PDO: OK The next couple of extensions are optional and recommended to get the best performance: FileInfo: NOT AVAILABLE(See http://www.php.net/manual/en/book.fileinfo.php) Libiconv: OK Multibyte: OK OpenSSL: OK Mcrypt: OK Intl: NOT AVAILABLE(See http://www.php.net/manual/en/book.intl.php) Exif: NOT AVAILABLE(See http://www.php.net/manual/en/book.exif.php) Checking available databases Check which of the supported extensions are installed. At least one of them is required. MySQL: NOT AVAILABLE(See http://www.php.net/manual/en/ref.pdo-mysql.php) PostgreSQL: NOT AVAILABLE(See http://www.php.net/manual/en/ref.pdo-pgsql.php) SQLite: OK SQLite (v2): NOT AVAILABLE(See http://www.php.net/manual/en/ref.pdo-sqlite.php) SQL Server (SQLSRV): NOT AVAILABLE(See http://www.php.net/manual/en/ref.pdo-sqlsrv.php) SQL Server (DBLIB): NOT AVAILABLE(See http://www.php.net/manual/en/ref.pdo-dblib.php) Check for required 3rd party libs This also checks if the include path is set correctly. PEAR: OK Net_SMTP: OK Net_IDNA2: OK Mail_mime: OK Checking php.ini/.htaccess settings The following settings are required to run Roundcube: file_uploads: OK session.auto_start: OK zend.ze1_compatibility_mode: OK mbstring.func_overload: OK magic_quotes_runtime: OK magic_quotes_sybase: OK The following settings are optional and recommended: allow_url_fopen: OK date.timezone: NOT OK(not set) register_globals: OK Check config file defaults.inc.php: OK config.inc.php: OK Check if directories are writable Roundcube may need to write/save files into these directories /usr/local/www/roundcube/temp/: OK Check DB config DSN (write): OK DB Schema: OK DB Write: OK DB Time: OK Test filetype detection Fileinfo/mime_content_type configuration: NOT OK Try setting the mime_magic config option to null. Mimetype to file extension mapping: OK

3 2

export contacts including groups
by Gustavo Sansone 05 Feb '15

05 Feb '15

hi, i'm trying to export all users address books for a mail server migration (roundcube 0.9.2 to zimbra). some of the users have around 100-500 contacts grouped into several groups. i was able to export and import all the contacts by exporting the 'contacts' table from mysql to a csv file, but then i don't have the groups info. any ideas about how can i migrate the groups info from the address book?

1 0

Managesieve question
by Jorge Bastos 03 Feb '15

03 Feb '15

Hi, I have a question for managesieve plugin, that is, how could I set a vacation reply, based an hour interval? It's possible to do this between date interval, but I have the need in hours also, to setup a reply in non-work hours. Is this possible?

2 2

R: Re: R: R: Re: Issue with RC 1.0.4
by absolutely_free＠libero.it 27 Jan '15

27 Jan '15

Hi Luciano, I'm using Apache: # httpd -V Server version: Apache/2.2.15 (Unix) Server built: Oct 16 2014 14:48:21 Server's Module Magic Number: 20051115:25 Server loaded: APR 1.3.9, APR-Util 1.3.9 Compiled using: APR 1.3.9, APR-Util 1.3.9 Architecture: 64-bit Server MPM: Prefork threaded: no forked: yes (variable process count) I have no error in /var/log/php-fpm/error.log This is my php-fpm pool config: [www] listen = 127.0.0.1:9000 listen.allowed_clients = 127.0.0.1 user = apache group = apache pm = dynamic pm.max_children = 300 pm.start_servers = 40 pm.min_spare_servers = 10 pm.max_spare_servers = 40 request_slowlog_timeout = 4 slowlog = /var/log/php-fpm/www-slow.log php_admin_value[error_log] = /var/log/php-fpm/www-error.log php_admin_flag[log_errors] = on php_value[session.save_handler] = files php_value[session.save_path] = /var/lib/php/session Thank you >----Messaggio originale---- >Da: luciano(a)vespaperitivo.it >Data: 21/01/2015 16.26 >A: <users(a)lists.roundcube.net> >Ogg: Re: [RCU] R: R: Re: Issue with RC 1.0.4 > > >On Wed, 21 Jan 2015 13:09:01 +0100 (CET) >"absolutely_free(a)libero.it" <absolutely_free(a)libero.it> wrote: > >> can anyone help me with this problem? >> I just completely reinstalled RC 1.0.4, I get no errors during installation. >> >> The error remains: >> >> [Wed Jan 21 12:54:03 2015] [error] [client ] FastCGI: server "/usr/lib/cgi- >> bin/php5-fcgi" stderr: PHP message: PHP Fatal error: require_once(): Failed >> opening required 'Roundcube/bootstrap.php' (include_path='/usr/lib/cgi- >> bin/program/lib:.:/usr/share/pear:/usr/share/php') in >> /home/domain/extracms/webmail/program/include/iniset.php on line 63 >It may be a fast-cgi problem. > >Under which http server does it run? >What does your /etc/php-fpm.conf say about it? > >Cheers, > >Luciano. >-- > /"\ /Via A. Salaino, 7 - 20144 Milano (Italy) > \ / ASCII RIBBON CAMPAIGN / PHONE : +39 2 485781 FAX: +39 2 48578250 > X AGAINST HTML MAIL / E-MAIL: posthamster(a)sublink.sublink.ORG > / \ AND POSTINGS / WWW: http://www.lesassaie.IT/ >_______________________________________________ >Roundcube Users mailing list >users(a)lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users >

1 0

Security update 1.0.5 released
by Thomas Bruederli 24 Jan '15

24 Jan '15

Dear Roundcube users We just released a security update to the stable version 1.0 of Roundcube webmail. Beside a recently reported Cross-Site-Scripting vulnerability, it also contains some bug fixes and improvements we found important for the long term support branch of Roundcube. The fixed XSS issue is documented here: http://trac.roundcube.net/ticket/1490227 See the full changelog here: http://trac.roundcube.net/wiki/Changelog It's considered stable and we recommend to update all productive installations of Roundcube with this version. Download it from http://roundcube.net/download. And like always: backup before updating! Kind regards, Thomas

1 0

Re: [RCU] R: R: Re: Issue with RC 1.0.4
by Luciano Mannucci 21 Jan '15

21 Jan '15

On Wed, 21 Jan 2015 13:09:01 +0100 (CET) "absolutely_free(a)libero.it" <absolutely_free(a)libero.it> wrote: > can anyone help me with this problem? > I just completely reinstalled RC 1.0.4, I get no errors during installation. > > The error remains: > > [Wed Jan 21 12:54:03 2015] [error] [client ] FastCGI: server "/usr/lib/cgi- > bin/php5-fcgi" stderr: PHP message: PHP Fatal error: require_once(): Failed > opening required 'Roundcube/bootstrap.php' (include_path='/usr/lib/cgi- > bin/program/lib:.:/usr/share/pear:/usr/share/php') in > /home/domain/extracms/webmail/program/include/iniset.php on line 63 It may be a fast-cgi problem. Under which http server does it run? What does your /etc/php-fpm.conf say about it? Cheers, Luciano. -- /"\ /Via A. Salaino, 7 - 20144 Milano (Italy) \ / ASCII RIBBON CAMPAIGN / PHONE : +39 2 485781 FAX: +39 2 48578250 X AGAINST HTML MAIL / E-MAIL: posthamster(a)sublink.sublink.ORG / \ AND POSTINGS / WWW: http://www.lesassaie.IT/

1 0

R: R: Re: Issue with RC 1.0.4
by absolutely_free＠libero.it 21 Jan '15

21 Jan '15

Hi, can anyone help me with this problem? I just completely reinstalled RC 1.0.4, I get no errors during installation. The error remains: [Wed Jan 21 12:54:03 2015] [error] [client ] FastCGI: server "/usr/lib/cgi- bin/php5-fcgi" stderr: PHP message: PHP Fatal error: require_once(): Failed opening required 'Roundcube/bootstrap.php' (include_path='/usr/lib/cgi- bin/program/lib:.:/usr/share/pear:/usr/share/php') in /home/domain/extracms/webmail/program/include/iniset.php on line 63 # find . -name "bootstrap.php" ./program/lib/Roundcube/bootstrap.php Thank you >----Messaggio originale---- >Da: absolutely_free(a)libero.it >Data: 25/12/2014 13.06 >A: "Roundcube Users mailing list"<users(a)lists.roundcube.net> >Ogg: [RCU] R: Re: Issue with RC 1.0.4 > >Hi Barul, >yes I have it > ># find . -name "bootstrap.php" >./program/lib/Roundcube/bootstrap.php > > > >>----Messaggio originale---- >>Da: barul(a)barul.info >>Data: 24/12/2014 15.57 >>A: <absolutely_free(a)libero.it>, "Roundcube Users mailing list"<users@lists. >roundcube.net> >>Ogg: Re: [RCU] Issue with RC 1.0.4 >> >>On 2014-12-24 09:53, absolutely_free(a)libero.it wrote: >>> Hi, >>> I just installed RC 1.0.4 on CentOS server. >>> PHP version is 5.3.3 (fastcgi). >>> >>> I completed installer successfully. >>> When I try to open http://domain..../webmail I get blank page. >>> >>> Access Log reports internal server error: >>> >>> "GET /extracms/webmail/ HTTP/1.1" 500 - >>> >>> >>> And this is error log: >>> >>> [Wed Dec 24 09:46:37 2014] [error] [client ] FastCGI: server >>> "/usr/lib/cgi-bin/php5-fcgi" stderr: PHP message: PHP Warning: >>> require_once(Roundcube/bootstrap.php): failed to open stream: No such >>> file or directory in >>> /home/domain.it/extracms/webmail/program/include/iniset.php on line 63 >>> [Wed Dec 24 09:46:37 2014] [error] [client ] FastCGI: server >>> "/usr/lib/cgi-bin/php5-fcgi" stderr: PHP message: PHP Fatal error: >>> require_once(): Failed opening required 'Roundcube/bootstrap.php' >>> (include_path='/usr/lib/cgi-bin/program/lib:.:/usr/share/pear: >/usr/share/php') >>> in /home/domain.it/extracms/webmail/program/include/iniset.php on line >>> 63 >>> >>> Can you help me? >>> Thank you very much! >>> >>> >>> _______________________________________________ >>> Roundcube Users mailing list >>> users(a)lists.roundcube.net >>> http://lists.roundcube.net/mailman/listinfo/users >>Hi, >> >>Seems to be saying that the bootstrap.php file is not found. >>Do you have it under program/lib/Roundcube/bootstrap.php ? >>-- >>barul >> > > >_______________________________________________ >Roundcube Users mailing list >users(a)lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users >

1 0

Roundcube login error
by sharmistha＠lpsc.gov.in 21 Jan '15

21 Jan '15

I had installed and configured RoundCube 1.0.4 as an internet User Interface. The problem that I am facing is that whenever I am using ipaddress of the server to login to roundcube there is no problem but whenever I am writing the domain name of my server in the address bar , every time the login page displays but on typing the username, password and submitting it displays the error " Your session is invalid or expired ".. I have raised tickets in Roundcube but could not get much help. Can someone help me on this issue? Thanks in advance. Sharmistha B

1 0

ldap address book
by Гаврилов Алексей 21 Jan '15

21 Jan '15

Hello. Updating first tried to 0.8.6 -> 0.9.5 (ubuntu repository) and 0.8.6 -> 1.0.4 manifests itself as a problem. When you create a new message. I'm trying to write the address of the ldap directory, but it is not substituted. Thus substituted addresses from your personal address book. I would like to build this functionality. Because it blocks the update. That I have set up wrong? My configuration file. ./config/config.inc.php <?php $config = array(); $dbuser='*'; $dbpass='*'; $dbname='*'; $dbserver='unix(/run/mysqld/mysqld.sock)'; $dbport=''; $dbtype='mysql'; $config['db_dsnw'] = "$dbtype://$dbuser:$dbpass@$dbserver$dbport/$dbname"; $config['default_host'] = 'ssl://localhost'; $config['default_port'] = 993; $config['smtp_server'] = 'ssl://localhost'; $config['smtp_port'] = 465; $config['smtp_user'] = '%u'; $config['smtp_pass'] = '%p'; // ---------------------------------- // LDAP // ---------------------------------- $config['ldap_cache'] = null; $config['ldap_cache_ttl'] = '10h'; $config['support_url'] = '*'; $config['des_key'] = '*'; $config['plugins'] = array( 'archive', 'zipdownload', 'managesieve', 'newmail_notifier', 'emoticons', 'thunderbird_labels', 'html5_notifier', 'contextmenu', 'keyboard_shortcuts', 'vcard_attachments', 'markasjunk', ); // skin name: folder from skins/ $config['skin'] = 'larry'; $config['session_lifetime'] = 1440; $config['enable_installer'] = false; // ---------------------------------- // USER INTERFACE // ---------------------------------- $config['archive_mbox'] = 'Archives'; $config['archive_type'] = 'month'; $config['default_folders'] = array('INBOX', 'Drafts', 'Sent', 'Junk', 'Trash','Archives'); // ---------------------------------- // ADDRESSBOOK SETTINGS // ---------------------------------- $config['ldap_public'] = array(); $regions = array( '74RU' => 'chelyabinsk', '161RU' => 'rostov', 'UFA1RU' => 'ufa', '29RU' => 'arkhangelsk', '59RU' => 'perm', '63RU' => 'samara', '72RU' => 'tumen', '76RU' => 'yaroslavl', '116RU' => 'kazan', 'V1RU' => 'volgograd', ); $config['autocomplete_addressbooks'] = array('sql'); foreach($regions as $k=>$v) { $config['ldap_public'][$k] = array( 'name' => $k, 'hosts' => array('*'), 'port' => 389, 'use_tls' => false, 'user_specific' => false, 'writable' => false, 'fieldmap' => array( // Roundcube => LDAP 'name' => 'displayName', 'department' => 'ou', 'jobtitle' => 'title', 'surname' => '', 'im:icq' => 'pager', 'firstname' => '', 'email' => 'mail', 'phone:home' => 'homePhone', 'phone:work' => 'telephoneNumber', 'phone:mobile' => 'mobile', 'street' => '', 'zipcode' => '', 'locality' => '', 'country' => '', 'organization' => 'o', ), 'base_dn' => 'ou=users,ou='.$v.',dc=*,dc=ru', 'required_fields' => array("cn", "sn", "mail"), 'LDAP_Object_Classes' => array("top", "inetOrgPerson"), 'LDAP_rdn' => 'mail', 'writable' => false, 'ldap_version' => 3, 'search_fields' => array('displayName', 'mail', 'cn'), 'sort' => 'displayName', 'scope' => 'sub', 'filter' => '(mail=*)', 'global_search' => true, 'fuzzy_search' => true, 'vlv' => false, 'groups' => array( 'base_dn' => 'ou=groups,ou=_global,dc=*,dc=ru', 'filter' => '(objectClass=groupOfUniqueNames)', 'object_classes' => array("groupOfUniqueNames"), 'member_attr' => 'uniqueMember', ), ); array_push($config['autocomplete_addressbooks'], $k); } $config['autocomplete_min_length'] = 1; // ---------------------------------- // LOGGING/DEBUGGING // ---------------------------------- $config['debug_level'] = 8; $config['log_driver'] = 'file'; $config['log_date_format'] = 'd-M-Y H:i:s O'; $config['syslog_id'] = 'roundcube'; $config['syslog_facility'] = LOG_USER; $config['per_user_logging'] = true; $config['smtp_log'] = true; $config['log_logins'] = true; $config['log_session'] = true; $config['sql_debug'] = true; $config['imap_debug'] = true; $config['ldap_debug'] = true; $config['smtp_debug'] = true; // ---------------------------------- // USER PREFERENCES // ---------------------------------- $config['preview_pane'] = true; $config['reply_mode'] = 1; $config['mdn_requests'] = 3; $config['draft_autosave'] = 30; $rcmail_config['include_host_config'] = array( 'mail.*' => '*.php', 'mail.roundcube.com' => 'com_config.inc.php' );

3 3

Re: [RCU] Unable to connect to server
by webmaster 20 Jan '15

20 Jan '15

Oh no. I couldn't believe it's so easy. Not it works as expected. Thanks a lot. John Am 19.01.2015 um 20:47 schrieb simon(a)wf-hosting.de: > Rename the configfile and remove the .dist extension. > > Regards, > Simon > > Am 19.01.2015 20:37 schrieb webmaster <webmaster(a)my-it-brain.de>: >> >> Hello users, >> >> I'm using the roundcube webmailer and I'm trying to enable the >> managesieve plugin. But I get the error message "Unable to connect to >> server" and have no idea what's wrong. >> >> Here are some information about my system environment: >> >> Distributor ID: Ubuntu >> Description: Ubuntu 14.04.1 LTS >> Release: 14.04 >> Codename: trusty >> :~$ sudo netstat -tulpen >> Active Internet connections (only servers) >> Proto Recv-Q Send-Q Local Address Foreign Address >> State User Inode PID/Program name >> tcp 0 0 0.0.0.0:25 0.0.0.0:* >> LISTEN 0 3102948964 1515/master >> tcp 0 0 0.0.0.0:443 0.0.0.0:* >> LISTEN 0 16378785 2059/nginx >> tcp 0 0 0.0.0.0:4190 0.0.0.0:* >> LISTEN 0 3097769441 544/dovecot >> tcp 0 0 0.0.0.0:993 0.0.0.0:* >> LISTEN 0 3097769517 544/dovecot >> tcp 0 0 127.0.0.1:3306 0.0.0.0:* >> LISTEN 115 3098328820 605/mysqld >> tcp 0 0 0.0.0.0:587 0.0.0.0:* >> LISTEN 0 3102949140 1515/master >> tcp 0 0 0.0.0.0:143 0.0.0.0:* >> LISTEN 0 3097769511 544/dovecot >> tcp 0 0 0.0.0.0:80 0.0.0.0:* >> LISTEN 0 16378780 2059/nginx >> tcp 0 0 0.0.0.0:22 0.0.0.0:* >> LISTEN 0 3097766721 547/sshd >> tcp6 0 0 :::25 :::* >> LISTEN 0 3102948969 1515/master >> tcp6 0 0 :::4190 :::* >> LISTEN 0 3097769446 544/dovecot >> tcp6 0 0 :::993 :::* >> LISTEN 0 3097769520 544/dovecot >> tcp6 0 0 :::587 :::* >> LISTEN 0 3102949154 1515/master >> tcp6 0 0 :::143 :::* >> LISTEN 0 3097769514 544/dovecot >> tcp6 0 0 :::22 :::* >> LISTEN 0 3097766741 547/sshd >> >> As you can see, sieve is listening on port 4190 on localhost. In my >> /usr/share/nginx/roundcube/plugins/managesieve/config.inc.php.dist the >> following connection parameters are configured: >> >> // managesieve server port. When empty the port will be determined >> automatically >> // using getservbyname() function, with 4190 as a fallback. >> $config['managesieve_port'] = 4190; >> >> // managesieve server address, default is localhost. >> // Replacement variables supported in host name: >> // %h - user's IMAP hostname >> // %n - http hostname ($_SERVER['SERVER_NAME']) >> // %d - domain (http hostname without the first part) >> // For example %n = mail.domain.tld, %d = domain.tld >> $config['managesieve_host'] = '127.0.0.1'; >> >> When I connect to the port 4190 I get the following connection: >> >> :~$ telnet 127.0.0.1 4190 >> Trying 127.0.0.1... >> Connected to 127.0.0.1. >> Escape character is '^]'. >> "IMPLEMENTATION" "Dovecot (Ubuntu) Pigeonhole" >> "SIEVE" "fileinto reject envelope encoded-character vacation subaddress >> comparator-i;ascii-numeric relational regex imap4flags copy include >> variables body enotify environment mailbox date ihave" >> "NOTIFY" "mailto" >> "SASL" "PLAIN LOGIN" >> "STARTTLS" >> "VERSION" "1.0" >> OK "Dovecot (Ubuntu) ready." >> >> I don't understand what's wrong here and appreciate your help. >> >> Thanks in advance. >> John >> _______________________________________________ >> Roundcube Users mailing list >> users(a)lists.roundcube.net >> http://lists.roundcube.net/mailman/listinfo/users

1 0

Unable to connect to server
by webmaster 20 Jan '15

20 Jan '15

Hello users, I'm using the roundcube webmailer and I'm trying to enable the managesieve plugin. But I get the error message "Unable to connect to server" and have no idea what's wrong. Here are some information about my system environment: Distributor ID: Ubuntu Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty :~$ sudo netstat -tulpen Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 0 3102948964 1515/master tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 0 16378785 2059/nginx tcp 0 0 0.0.0.0:4190 0.0.0.0:* LISTEN 0 3097769441 544/dovecot tcp 0 0 0.0.0.0:993 0.0.0.0:* LISTEN 0 3097769517 544/dovecot tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 115 3098328820 605/mysqld tcp 0 0 0.0.0.0:587 0.0.0.0:* LISTEN 0 3102949140 1515/master tcp 0 0 0.0.0.0:143 0.0.0.0:* LISTEN 0 3097769511 544/dovecot tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 0 16378780 2059/nginx tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 3097766721 547/sshd tcp6 0 0 :::25 :::* LISTEN 0 3102948969 1515/master tcp6 0 0 :::4190 :::* LISTEN 0 3097769446 544/dovecot tcp6 0 0 :::993 :::* LISTEN 0 3097769520 544/dovecot tcp6 0 0 :::587 :::* LISTEN 0 3102949154 1515/master tcp6 0 0 :::143 :::* LISTEN 0 3097769514 544/dovecot tcp6 0 0 :::22 :::* LISTEN 0 3097766741 547/sshd As you can see, sieve is listening on port 4190 on localhost. In my /usr/share/nginx/roundcube/plugins/managesieve/config.inc.php.dist the following connection parameters are configured: // managesieve server port. When empty the port will be determined automatically // using getservbyname() function, with 4190 as a fallback. $config['managesieve_port'] = 4190; // managesieve server address, default is localhost. // Replacement variables supported in host name: // %h - user's IMAP hostname // %n - http hostname ($_SERVER['SERVER_NAME']) // %d - domain (http hostname without the first part) // For example %n = mail.domain.tld, %d = domain.tld $config['managesieve_host'] = '127.0.0.1'; When I connect to the port 4190 I get the following connection: :~$ telnet 127.0.0.1 4190 Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. "IMPLEMENTATION" "Dovecot (Ubuntu) Pigeonhole" "SIEVE" "fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave" "NOTIFY" "mailto" "SASL" "PLAIN LOGIN" "STARTTLS" "VERSION" "1.0" OK "Dovecot (Ubuntu) ready." I don't understand what's wrong here and appreciate your help. Thanks in advance. John

1 0

roundcubemail incompatible with php-5.6 ?
by Thomas Spuhler 16 Jan '15

16 Jan '15

After upgrading php to version 5.6 with all related packages such as apache, I cannot log into my mail account anymore (I am running my own e-mail test server on a virtualbox) I think I am honing in on the problem: I upgraded everything from mageia4 to mageia5 but not: roundcubemail php apache and I do not have problem to login. After updating php (with all php related packages) and apache, I get the following error in journalctl httpd.service Jan 14 17:59:41 vbox.btspuhler.com suhosin[4907]: ALERT - ASCII-NUL chars not allowed within request variables - dropped variable '_url' (attacker '127.0.0.1', file '/usr/share/roundcubemail/index.php') Jan 14 17:59:41 vbox.btspuhler.com suhosin[4907]: ALERT - dropped 1 request variables - (0 in GET, 1 in POST, 0 in COOKIE) (attacker '127.0.0.1', file '/usr/share/roundcubemail/index.php') Has anybody else experienced this? -- Best regards Thomas Spuhler All of my e-mails have a valid digital signature ID 60114E63

3 4

Attachments "disappear" when sending email with RC 0.9.5
by Tobi 14 Jan '15

14 Jan '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello list we currently use RC 0.9.5 on a Debian-Wheezy with Apache/2.2.22 and PHP 5.4.34-0+deb7u1. We have the problem that from time to time attachments get lost when sending an email. Roundcube shows that all the attachments have been added to a mail, but when receiving the mail some attachments are missing. We checked the mails after they left RC and saw that RC submits these mails with missing attachments to the smtp server. The problem is that it is very hard to reproduce the problem as it does not occur with every mail containing multiple attachments. Out of 20 of our tests maybe one shows the problem. After some research I found the following bug report: http://trac.roundcube.net/ticket/1488422 For me it sounds like the problem we have but according to the information there it should be resolved in the version of RC we use. Is there anymore information I should provide? Is there maybe a "attachment" debugging mode in RC which could reveal the source of the problem? Thanks a lot for any help and idea Best regards tobi -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAEBAgAGBQJUq5thAAoJEDUc5iWoaKTkkVYQAIzM6O0EIxcCR1g3q5xjGA+K c0sW/0Svm1AWRGkY4y6Dr+aI7ti7ZbmtS3uyK7Hm9z1r0X2iK8zxu+bhwzhr4sSJ XeJak1gvHvUCVIG4l/cktRDQk7vTRFElD7c3KCgC6lYmaOOgGK9f5FDsYrR6u6Cx tA7OxEg5hdI4SeSfU8Trx0T4Ai9AAvmumlb/5FWeG4EarWHKSRFiIgk3y4yjE7XM lhoBCU1spnYR0EPkBJZJ22hMu+Jd93QJASFiDuIRgNWsqrOuj1ubZHlFTgPFjGaq saFfmT6BlmdhO4VhpXjb/wuYAC8zyPhxMakFQFk5TF4hvVm/DaEP67vjMd9gz3xk YG9cUFKX8g6oXpjHZwzcOFgyY12BT52y9V3M61IQNk7sG+CVCJkgTCZugBILMn8l jJiXlxRk2RzumhCWi1Y5kqTpF2MaD75Sgj+utEx5plDFkh8/c8s+ErIj6UG5OGqR q2hOXZEJCGj/njko2PKBZ49qqkFvgfsMal4DDLcrOfWuCuMsTJqYNTJjSLTm4iwK LsRSbx7U35y23VD6o0lFXWPbbC6y9k3BMrTs2/L9iCcjqICI/9KZieUAkXCL1d4s 4FjtLa3VbNAo5dZSOFZINEEEDSILFVKPP86QFMcFsrtZ2egw5quB92U1UWc8LMod 10vZCNRbgXzeY/A2BR+Z =cv5m -----END PGP SIGNATURE-----

1 2

Re: [RCU] Strip arbitrary characters from login
by Robert Blayzor 06 Jan '15

06 Jan '15

On Jan 6, 2015, at 11:38 AM, Reindl Harald <h.reindl(a)thelounge.net> wrote: > > this is nonsense for several reasons: > > * both of our email contain a dot in the local part > * in case of dictionary attacks you make them > easier with "result in the same user" > * any "arbitrary" char in the username makes a failed login more likely > * if you consider a attack to the dovecot backend you can be sure that > dovecot has less secure holes as your whole httpd/php/rc-stack Thanks for your opinion. Gmail does this very "nonsense"... -- Robert inoc.net!rblayzor http://inoc.net/

1 0

Strip arbitrary characters from login
by Robert Blayzor 06 Jan '15

06 Jan '15

Is there a way to strip arbitrary characters from a users login input. Ie: one may consider something like periods in the local_part to be arbitrary. So logging in a "user", "u.ser" or "u.s.e.r" all result in the same user. One way would be to run the input through a search/replace regex... is this possible in any way? -- Robert inoc.net!rblayzor http://inoc.net/

1 0

calendar & calendar_plus no caldav server can be set
by marco 06 Jan '15

06 Jan '15

Hello, I am missing the caldav server input settings field in the new plugin versions: calendar (27983) 19.0.32 (2015-01-05) 19.0.32 (2015-01-05) 98 <http://dev.myroundcube.com?_action=plugin.plugin_server_translate&_hl=de_DE…> % Problem <http://code.google.com/p/myroundcube/issues/entry?summary=[calendar]%20-%20….> calendar_plus (4408) 4.0.26 (2015-01-02) 4.0.26 (2015-01-02) 0 <http://dev.myroundcube.com?_action=plugin.plugin_server_translate&_hl=de_DE…> % Problem <http://code.google.com/p/myroundcube/issues/entry?summary=[calendar_plus]%2….> previously I could enter my baikal carddav server url but this field is not available since upgrading.

4 4

plugin_manager not visible
by forum.news＠gmx.de 05 Jan '15

05 Jan '15

Hi All, I just installed plugin_manager (downloaded and copied it into the plugins folder). I also added it in the main config: File "C:\inetpub\wwwroot\roundcubemail\config\config.inc.php" $config['plugins'] = array('plugin_manager'); After login in, a popup was shown that I need submit some SQL statements against the database which I did. Now plugin_manager is listed in the "about" section, but that is all. It is not visible in the Settings section and there was no popup providing the md5 hash key for the myrc file. It just does not show up... Did I miss something? btw: I'm running RC on Windows using IIS. Thanks Konrad

3 2

kolab/calendar
by fak3r 05 Jan '15

05 Jan '15

I'm running roundcube-1.1-beta, have installed a few plugins that are working fine, I installed kolab/calendar and kolab/libcalendaring plugins via the tar they provide on the kolab site: roundcubemail-plugins-kolab-3.2.1 I followed the README in the calendar plugin, configured and then initiated the database, but when I click the new calendar tab within the roundcube UI I get the error [29-Dec-2014 20:32:33 America/Chicago] PHP Fatal error: Call to undefined method rcube_user::list_emails() in /var/www/html/lowf.at/roundcube/plugins/calendar/calendar.php on line 1591 Is anyone running the kolab/calendar from that 3.2.1 bundle? I looked through the RC forum, wiki, but don't see anything related to this, let me know if there's a better place to ask this. As an aside, I'm running my own mailserver again, but used to and used RC maybe 3 years ago, and I'm really amazed at how the project has progressed, it's really slick. Thanks

3 3

Redirecting emails
by rochelle＠icandoitmontessori.co.uk 02 Jan '15

02 Jan '15

Hi, please can someone explain how I can redirect emails from my webmail.gridhost account to a gmail account? I need more folders than are available on here! Thanks very much, Rochelle

3 3

Roundcube admin account
by forum.news＠gmx.de 01 Jan '15

01 Jan '15

Hi, I just installed roundcube and also the plugin manager, but I cannot access the plugin manager UI as I do not know how to make my user an admin user. Is this a setting in the config file? Or where else do I specify which user is an admin user (with access to the plugin manager UI)? At the moment, I can login but I do only have access to my mailbox and to my personal mailbox settings, but not to any admin related settings. Thanks Konrad

1 0

Roundcube with SabreDav on Windows with IIS
by forum.news＠gmx.de 01 Jan '15

01 Jan '15

Hi, I'm trying to setup Roundcube with calendar (CalDav) support on Windows using IIS. I got Roundcube mail up and running but now I got stuck. I tried to follow this link: https://myroundcube.com/myroundcube-plugins/windows/installing-sabredav-on-… Anybody on this list who can help me with setting up SabreDav and the calendar plugin? Thanks Konrad

1 0

Installing for multiple domains
by Jon 1234 30 Dec '14

30 Dec '14

I have a directory structure like this: username/ username/domain1_com username/domain2_com And would like to use Roundcube separately at domain1.com/webmail and domain2.com/webmail I assume I install once in username/roundcube/ and use Alias /webmail /path/to/username/roundcube for each domain. Is there anything else I would need to do? Thanks in anticipation Jon

2 3

RC 1.0.4 issue
by Steve Fintel 25 Dec '14

25 Dec '14

I upgraded an RC 0.9 installation to RC 1.0.4. I have clients set to automatically mark messages as read after 5 seconds. When I view an unread message for more than 5 seconds, I get the following error message: Server Error: SELECT: Client tried to access nonexistent namespace. (Mailbox name should probably be prefixed with: INBOX.) I can manually set the message as read. Any suggestions on where I should look? --Steve Fintel

2 2

R: Re: Issue with RC 1.0.4
by absolutely_free＠libero.it 25 Dec '14

25 Dec '14

Hi Barul, yes I have it # find . -name "bootstrap.php" ./program/lib/Roundcube/bootstrap.php >----Messaggio originale---- >Da: barul(a)barul.info >Data: 24/12/2014 15.57 >A: <absolutely_free(a)libero.it>, "Roundcube Users mailing list"<users@lists. roundcube.net> >Ogg: Re: [RCU] Issue with RC 1.0.4 > >On 2014-12-24 09:53, absolutely_free(a)libero.it wrote: >> Hi, >> I just installed RC 1.0.4 on CentOS server. >> PHP version is 5.3.3 (fastcgi). >> >> I completed installer successfully. >> When I try to open http://domain..../webmail I get blank page. >> >> Access Log reports internal server error: >> >> "GET /extracms/webmail/ HTTP/1.1" 500 - >> >> >> And this is error log: >> >> [Wed Dec 24 09:46:37 2014] [error] [client ] FastCGI: server >> "/usr/lib/cgi-bin/php5-fcgi" stderr: PHP message: PHP Warning: >> require_once(Roundcube/bootstrap.php): failed to open stream: No such >> file or directory in >> /home/domain.it/extracms/webmail/program/include/iniset.php on line 63 >> [Wed Dec 24 09:46:37 2014] [error] [client ] FastCGI: server >> "/usr/lib/cgi-bin/php5-fcgi" stderr: PHP message: PHP Fatal error: >> require_once(): Failed opening required 'Roundcube/bootstrap.php' >> (include_path='/usr/lib/cgi-bin/program/lib:.:/usr/share/pear: /usr/share/php') >> in /home/domain.it/extracms/webmail/program/include/iniset.php on line >> 63 >> >> Can you help me? >> Thank you very much! >> >> >> _______________________________________________ >> Roundcube Users mailing list >> users(a)lists.roundcube.net >> http://lists.roundcube.net/mailman/listinfo/users >Hi, > >Seems to be saying that the bootstrap.php file is not found. >Do you have it under program/lib/Roundcube/bootstrap.php ? >-- >barul >

1 0

Issue with RC 1.0.4
by absolutely_free＠libero.it 24 Dec '14

24 Dec '14

Hi, I just installed RC 1.0.4 on CentOS server. PHP version is 5.3.3 (fastcgi). I completed installer successfully. When I try to open http://domain..../webmail I get blank page. Access Log reports internal server error: "GET /extracms/webmail/ HTTP/1.1" 500 - And this is error log: [Wed Dec 24 09:46:37 2014] [error] [client ] FastCGI: server "/usr/lib/cgi-bin/php5-fcgi" stderr: PHP message: PHP Warning: require_once(Roundcube/bootstrap.php): failed to open stream: No such file or directory in /home/domain.it/extracms/webmail/program/include/iniset.php on line 63 [Wed Dec 24 09:46:37 2014] [error] [client ] FastCGI: server "/usr/lib/cgi-bin/php5-fcgi" stderr: PHP message: PHP Fatal error: require_once(): Failed opening required 'Roundcube/bootstrap.php' (include_path='/usr/lib/cgi-bin/program/lib:.:/usr/share/pear:/usr/share/php') in /home/domain.it/extracms/webmail/program/include/iniset.php on line 63 Can you help me? Thank you very much!

2 1

Re: [RCU] Our Local Internet Service Provider WAS BANKRUPT !
by Thomas Bruederli 24 Dec '14

24 Dec '14

Hi We're sorry but you wrote to the wrong people. Roundcube is just a free software which your former hosting provider installed on their servers. There's nothing we can do for you in this case. Please stop spamming our mailing list with this request. Best regards, Thomas On Wed, Dec 24, 2014 at 11:24 AM, ümit özkefeli <uozkefeli(a)gmail.com> wrote: > > > > Dear Sir / Madam ; > > Our Local Service Provider WAS BANKRUPT ! > WE CAN NOT USE OUR EMAIL! > > > My company CNN ELEKTRONIK LTD. STI is TURKISH COMPANY in ANKARA / TURKEY and > has been used roundcube for a long time using CNN-TRADE.COM web page and > uozkefeli(a)cnn-trade.com email address. > > Our local service provider which is SAFIR.NET was BANKRUPT and so we CAN NOT > USE OUR EMAİL ADDRESS uozkefeli(a)cnn-trade.com since 18th Thursday 2014. > > As you can see the below info that was taken from your web infos ; we have > using cnn-trade.com DOMAIN NAME sine 2004. > > > We can not get any contact with our local service provider SAFIR.NET neither > from their personal phone nor their office phone numbers. > There was no answer for our emalls and we can not use their web page that is > SAFIRNET.NET > > > WOULD YOU PLEASE LET ME USE OUR EMAIL ADDRESS UOZKEFELI(a)CNN-TRADE.COM . > > If you send me our DOMAIN NAME AND HOSTING CODES we can transfer our web > page and email address to another service provider. > > First of all I need to use my email address uozkefeli(a)cnn-trade.com > urgently! > PLEASE SUPPORT US. > > > Best Regards. > > Umit OZKEFELI > General Manager > > > CNN ELEKTRONIK LTD. STI. > > Address: > Mahmut Yesari Sokak.No: 8-2 CANKAYA > ANKARA > TURKEY > > Phone : + 90 312 4397565 ( direct ) > Phone : + 90 312 4422011 > Fax : + 90 312 4386572 > > Cell : + 90 532 3138669 > > Email :uozkefeli@cnn-trade.com > > > > > · Whois Server Version 2.0 > > · > > · Domain names in the .com and .net domains can now be registered > > · with many different competing registrars. Go to > http://www.internic.net > > · for detailed information. > > · > > · Domain Name: CNN-TRADE.COM > > · Registrar: ONLINENIC, INC. > > · Whois Server: whois.onlinenic.com > > · Referral URL: http://www.OnlineNIC.com > > · Name Server: NS1.SAFIRNET.NET > > · Name Server: NS2.SAFIRNET.NET > > · Status: clientDeleteProhibited > > · Status: clientTransferProhibited > > · Updated Date: 16-sep-2014 > > · Creation Date: 07-sep-2004 > > · Expiration Date: 07-sep-2016 > > · > > · >>> Last update of whois database: Fri, 19 Dec 2014 07:37:24 GMT > <<< > > · > > · NOTICE: The expiration date displayed in this record is the date > the > > · registrar's sponsorship of the domain name registration in the > registry is > > · currently set to expire. This date does not necessarily reflect > the expiration > > · date of the domain name registrant's agreement with the sponsoring > > · registrar. Users may consult the sponsoring registrar's Whois > database to > > · view the registrar's reported date of expiration for this > registration. > > · > > · TERMS OF USE: You are not authorized to access or query our Whois > > · database through the use of electronic processes that are > high-volume and > > · automated except as reasonably necessary to register domain names > or > > · modify existing registrations; the Data in VeriSign Global > Registry > > · Services' ("VeriSign") Whois database is provided by VeriSign for > > · information purposes only, and to assist persons in obtaining > information > > · about or related to a domain name registration record. VeriSign > does not > > · guarantee its accuracy. By submitting a Whois query, you agree to > abide > > · by the following terms of use: You agree that you may use this > Data only > > · for lawful purposes and that under no circumstances will you use > this Data > > · to: (1) allow, enable, or otherwise support the transmission of > mass > > · unsolicited, commercial advertising or solicitations via e-mail, > telephone, > > · or facsimile; or (2) enable high volume, automated, electronic > processes > > · that apply to VeriSign (or its computer systems). The compilation, > > · repackaging, dissemination or other use of this Data is expressly > > · prohibited without the prior written consent of VeriSign. You > agree not to > > · use electronic processes that are automated and high-volume to > access or > > · query the Whois database except as reasonably necessary to > register > > · domain names or modify existing registrations. VeriSign reserves > the right > > · to restrict your access to the Whois database in its sole > discretion to ensure > > · operational stability. VeriSign may restrict or terminate your > access to the > > · Whois database for failure to abide by these terms of use. > VeriSign > > · reserves the right to modify these terms at any time. > > · > > · The Registry database contains ONLY .COM, .NET, .EDU domains and > > · Registrars. > >

1 0

Update 1.0.4 released
by Thomas Bruederli 18 Dec '14

18 Dec '14

Dear Roundcube users We're proud to announce the next service release to the stable version 1.0 of Roundcube webmail. It contains a security fix along with some bug fixes and improvements for the long term support branch of Roundcube. The most important ones are: * Security: Fix possible CSRF attacks to some address book operations as well as to the ACL and Managesieve plugins. * Fix attachments encoded in TNEF containers (from Outlook) * Fix compatibility with PHP 5.2 See the full changelog here: http://trac.roundcube.net/wiki/Changelog It's considered stable and we recommend to update all productive installations of Roundcube with this version. Download it from http://roundcube.net/download. And remember: backup before updating! Kind regards, Thomas

1 0

Re: [RCU] Installing for multiple domains
by Jon 1234 17 Dec '14

17 Dec '14

> Date: Wed, 17 Dec 2014 17:26:06 +0100 > From: h.reindl(a)thelounge.net > > > apache conf is not a roundcube question > > > > You are right. Neither is tar but the installation instructions include > > the exact command for that :-) > > and if you don't know tar or how to read it's manpage take a step back > and re-consider maintaining software running on a public software - > that's the only sane answer because administration of a server brings > great responsibility, not only for the own machine, also for 3rd parties > attacked by badly maintained and so owned servers I mentioned tar light-heartedly because it also "is not a roundcube question" (and is very basic) but details are still provided for those installing Roundcube. Jon

1 0

Re: [RCU] Installing for multiple domains
by Jon 1234 17 Dec '14

17 Dec '14

> Date: Wed, 17 Dec 2014 00:27:08 +0100 > From: h.reindl(a)thelounge.net >> Is the Alias I suggested correct? > > for what benefit? > >> Or do you mean I should install it once in (e.g.) username/domain1_com/roundcube and use www.domain1.com for the web interface, even for domain2.com email addresses? > > http://roundcube.yourcompany.tld/ > > ours is for 600 domains and a lot of users, hence you enter your > username and your password at the login and that's it > I think we are talking at cross-purposes here. You have a single URL for access to the Roundcube webmail client, and users' emails can relate to any number of domains. What I would like to achieve is two URLs for access to Roundcube (www.domain1.com/webmail and www.domain2.com/webmail) where the emails relate to domain1.com and domain2.com respectively. Is this possible?

4 6

Re: [RCU] Installing for multiple domains
by Jon 1234 17 Dec '14

17 Dec '14

> From: h.reindl(a)thelounge.net >> I think we are talking at cross-purposes here. You have a single URL for access to the Roundcube webmail client, and users' emails can relate to any number of domains. What I would like to achieve is two URLs for access to Roundcube (www.domain1.com/webmail and www.domain2.com/webmail) where the emails relate to domain1.com and domain2.com respectively. Is this possible? > > again: roundcube is a MUA like Outlook or Thunderbird > > if all that users are on the same MAILSERVER there is no point to have > multiple roundcube URLs but frankly you can setup as many aliases as you > want - *but* they all would access the same MAILSERVER and so any user > known on that mailserver is valid The point would be that each person responsible for each domain is able to view his emails at his domain (e.g. domain1.com/webmail to view joe(a)domain1.com, or domain2.com/webmail or view john(a)domain2.com) rather than having to go to differentdomain.com/webmail to view those emails. I understand that it would be the case that both Joe and John (in the example) could access their emails via either URL, and I'm happy with that. I just wanted help on (ideally, exactly) what alias I would have to use (in mydirectory/domain1_com and in mydirectory/domain2_com) so that a single Roundcube installation (in mydirectory) could be accessed via either www.domain1.com/webmail or www.domain2.com/webmail Thanks in advance, Jon

2 1

Re: [RCU] Installing for multiple domains
by Jon 1234 17 Dec '14

17 Dec '14

----------------------------------------<br>> Date: Wed, 17 Dec 2014 16:45:01 +0100<br>> From: h.reindl(a)thelounge.net<br><br>> > The point would be that each person responsible for each domain is able to view his emails at his domain (e.g. domain1.com/webmail to view joe(a)domain1.com, or domain2.com/webmail or view john(a)domain2.com) rather than having to go to differentdomain.com/webmail to view those emails.<br>> ><br>> > I understand that it would be the case that both Joe and John (in the example) could access their emails via either URL, and I'm happy with that.<br>> ><br>> > I just wanted help on (ideally, exactly) what alias I would have to use (in mydirectory/domain1_com and in mydirectory/domain2_com) so that a single Roundcube installation (in mydirectory) could be accessed via either www.domain1.com/webmail or www.domain2.com/webmail<br>><br>> http://httpd.apache.org/docs/2.2/mod/mod_alias.html<br><br>Yes, and here's the page relating to ServerAlias, which was mentioned in a previous email here: <a href="http://httpd.apache.org/docs/2.2/mod/core.html#serveralias" target="_blank">http://httpd.apache.org/docs/2.2/mod/core.html#serveralias</a><div><br></div><div>My problem is that I'm a relative novice and would need something as simple as the general Roundcube installation instructions, but just on this topic :-) </div>

1 0

Re: [RCU] Installing for multiple domains
by Jon 1234 17 Dec '14

17 Dec '14

> Date: Tue, 16 Dec 2014 21:09:59 +0100 > From: h.reindl(a)thelounge.net > To: users(a)lists.roundcube.net; jon.1234(a)hotmail.co.uk > Subject: Re: [RCU] Installing for multiple domains > > > Am 16.12.2014 um 21:07 schrieb Jon 1234: >> I have a directory structure like this: >> username/ >> username/domain1_com >> username/domain2_com >> >> And would like to use Roundcube separately at domain1.com/webmail and domain2.com/webmail >> >> I assume I install once in username/roundcube/ and use Alias /webmail /path/to/username/roundcube for each domain. >> >> Is there anything else I would need to do? >> >> Thanks in anticipation > > since roundcube is a MTA you need only *one* setup and it authenticates > against you mailserver - why not just setup > roundcube.domain.exmaple.net, configure it correctly and you are done? > Yes, thanks, I thought I would only need to install it once. Is the Alias I suggested correct? Or do you mean I should install it once in (e.g.) username/domain1_com/roundcube and use www.domain1.com for the web interface, even for domain2.com email addresses? Thanks again.

1 0

R: Re: Search in all folders?
by absolutely_free＠libero.it 16 Dec '14

16 Dec '14

Thank you very much! >----Messaggio originale---- >Da: thomas(a)roundcube.net >Data: 16/12/2014 16.07 >A: "absolutely_free(a)libero.it"<absolutely_free(a)libero.it>, "Roundcube Users mailing list"<users(a)lists.roundcube.net> >Ogg: Re: [RCU] Search in all folders? > >On Tue, Dec 16, 2014 at 3:20 PM, absolutely_free(a)libero.it ><absolutely_free(a)libero.it> wrote: >> Hi, >> is there a way to make a search in all webmail folders? >> >> I am using RC 1.0.3 and in dropdown list I can search on: > >Cross-folder search will be part of Roundcube 1.1. You can already get >a sneak preview from the beta release. > >~Thomas >

1 0

Search in all folders?
by absolutely_free＠libero.it 16 Dec '14

16 Dec '14

Hi, is there a way to make a search in all webmail folders? I am using RC 1.0.3 and in dropdown list I can search on: Subject Sender Recipient Cc Bcc Body Entire message Thank you

2 1

Message in login page
by absolutely_free＠libero.it 10 Dec '14

10 Dec '14

Hi, is there a way to show a message in the login page? I need to inform several users about some change on our system. I am using RC 1.0.3 Thank you

2 1

Using Roundcube for a remote account?
by Lewis Butler 09 Dec '14

09 Dec '14

I have Roundcube installed on my web server to access the accounts on my mail server. I have a friend who has his mail and website hosted at a third party, but they only offer squirreltail (with no plugins) or Horde (which will not display his HTML email because that is a global setting) or standard IMAP via a client0side MUA. I do not want to host his site or email, but I am willing to setup Roundcube for him, if I can. What I would need to be able to do is have him load up a roundcube instance on my machine and then… login with his account info for the third party host? I mean, it seems as this would work if Roundcube is essentially acting as an MUA, but is it? I am assuming this would have to be an entirely different Roundcube install just for him. I know it would be easier to just use a regular MUA, but he’s old and set in his way and his idea of the Internet is Launching Internet Explorer. Having another application just for email would be difficult for him, and would then be difficult for me. He’s used to webmail though, and that’s what he’s used for years, so RC seems like an idea. Oh, and if possible I’d like to setup this instance of Roundcube so that only his account is allowed to try to login to the third party provider. I don’t want to become an alternate webmail for everyone else. So, is this possible? Am I just asking for trouble? -- History had wanted surgery. Sometimes Dr Chopper is the only surgeon to hand. There's something final about an axe.

3 2

mysql duplicate entry error
by absolutely_free＠libero.it 09 Dec '14

09 Dec '14

Hi,I noticed several errors like this: [08-Dec-2014 20:09:54 +0100]: DB Error: [1062] Duplicate entry 'dtsebj8imqd818vqm79anpo7k0' for key 'PRIMARY' (SQL Query: INSERT INTO session (sess_id, vars, ip, created, changed) VALUES ('dtsebj8imqd818vqm79anpo7k0', 'bGFuZ3VhZ2V8czo1OiJpdF9JVCI7dGVtcHxiOjE7c2tpbnxzOjU6Im1pY3NvIjs=', '97.223.185.141', now(), now())) in /var/www/webmail/program/lib/Roundcube/rcube_db.php on line 467 (POST /v2/?_task=mail&_action=refresh?_task=&_action=) How can I investigate this? MySQL is running on a different machine on the same LAN segment. Several users are complaining about issues in moving message to a different folder, delete message, and so on.Do you think that this problem can be related to mysql issue? Thankyou

1 0

Contact email addresses
by Webmaster 08 Dec '14

08 Dec '14

When I started using roundcube I imported my email contacts from a csv file. When I go to edit a contact the box for the email address is blank regardless of whether I choose home, work or other. Can anyone tell me why or how to get it to appear in the box Webmaster

3 5

Message threads like RE: RE: etc.
by barul 08 Dec '14

08 Dec '14

Hello, I don't know if it's offtopic or not, but I'm having an issue, which I know is not roundcube related. When I answer to an email using my smartphone, it automatically adds "RE:" at the beggining of the subject, so I often end up with threads with very very long subject. My question is: is it possible to make roundcube understand that they should be in the same thread? Thanks in advance, -- barul

1 0

how stable is the dev version
by Noel Butler 07 Dec '14

07 Dec '14

Like others have said the current editor is a shambles, my level of complaints has not reached a point I try the dev branch, or move to probably horde, so is anyone using the dev branch in production? (something I never do, but in rare cases, like this mess, it is a possible reality). Or is the next stable release not too far off, I need to resolve this before Christmas.

3 5

Automatic trash delete
by absolutely_free＠libero.it 05 Dec '14

05 Dec '14

Hi, in order to save disk space, I would like to active automatic trash purge. If I set this on global "config.inc.php": // Clear Trash on logout $config['logout_purge'] = true; it will be valid for every user? Or just the new ones? Thank you

4 7

Contacts
by Webmaster 03 Dec '14

03 Dec '14

When I started using roundcube I imported my email contacts from a csv file. When I go to edit a contact the box for the email address is blank regardless of whether I choose home, work or other. Can anyone tell me why, or how to get it to appear in the box. Thanks, Jeff

1 0

Open PDF for viewing instead of Save option
by Philip Rhoades 03 Dec '14

03 Dec '14

People, I can't remember if this option used to be available but for some time I haven't been able to view PDF attachments in another tab - now I only get the option to Save the PDF to disk. I have tried both Chrome and FireFox with no difference and there are no errors in the Apache logs - what I am missing? Thanks, Phil. -- Philip Rhoades GPO Box 3411 Sydney NSW 2001 Australia E-mail: phil(a)pricom.com.au

2 2

R: R: Re: System folder
by absolutely_free＠libero.it 01 Dec '14

01 Dec '14

Hi Alec, regarding #1490154, I see you spoke about "archive plugin". Anyway, I haven't such plugin. "Archive" is simple the name that I choose to this goal. >----Messaggio originale---- >Da: absolutely_free(a)libero.it >Data: 01/12/2014 11.21 >A: <users(a)lists.roundcube.net> >Ogg: [RCU] R: Re: System folder > >Hi Alec, >sorry for my delay. >Do you think can I upgrade to 1.1-beta? >When future release will be available, is it recommend upgrade from some- beta >to stable? > > > >>----Messaggio originale---- >>Da: alec(a)alec.pl >>Data: 15/11/2014 9.58 >>A: <users(a)lists.roundcube.net> >>Ogg: Re: [RCU] System folder >> >>On 11/14/2014 12:37 PM, absolutely_free(a)libero.it wrote: >>> I created a folder "Archive" and I would like to avoid accidental delete.. >>> I put this in config.inc.php: >>> >>> config.inc.php:$config['default_folders'] = array('INBOX', 'Drafts', >'Sent', 'Junk', 'Trash', 'Archive'); >> >>Looks like a bug in 1.0. Works for me in 1.1-beta. >> >>http://trac.roundcube.net/ticket/1490154 >> >>-- >>Aleksander 'A.L.E.C' Machniak >>LAN Management System Developer [http://lms.org.pl] >>Roundcube Webmail Developer [http://roundcube.net] >>--------------------------------------------------- >>PGP: 19359DC1 @@ GG: 2275252 @@ WWW: http://alec.pl >>_______________________________________________ >>Roundcube Users mailing list >>users(a)lists.roundcube.net >>http://lists.roundcube.net/mailman/listinfo/users >> > > >_______________________________________________ >Roundcube Users mailing list >users(a)lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users >

2 1

R: Re: System folder
by absolutely_free＠libero.it 01 Dec '14

01 Dec '14

Hi Alec, sorry for my delay. Do you think can I upgrade to 1.1-beta? When future release will be available, is it recommend upgrade from some-beta to stable? >----Messaggio originale---- >Da: alec(a)alec.pl >Data: 15/11/2014 9.58 >A: <users(a)lists.roundcube.net> >Ogg: Re: [RCU] System folder > >On 11/14/2014 12:37 PM, absolutely_free(a)libero.it wrote: >> I created a folder "Archive" and I would like to avoid accidental delete.. >> I put this in config.inc.php: >> >> config.inc.php:$config['default_folders'] = array('INBOX', 'Drafts', 'Sent', 'Junk', 'Trash', 'Archive'); > >Looks like a bug in 1.0. Works for me in 1.1-beta. > >http://trac.roundcube.net/ticket/1490154 > >-- >Aleksander 'A.L.E.C' Machniak >LAN Management System Developer [http://lms.org.pl] >Roundcube Webmail Developer [http://roundcube.net] >--------------------------------------------------- >PGP: 19359DC1 @@ GG: 2275252 @@ WWW: http://alec.pl >_______________________________________________ >Roundcube Users mailing list >users(a)lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users >

1 0

1.0.3 don't show messages in Spam folder (but there are)
by Alessio Cecchi 26 Nov '14

26 Nov '14

Hi, I'm running Roundcube 1.0.3 with dovecot as IMAP server. Some users when login into webmail don't see any messages in the Spam folder (but the messages are on the server and via "telnet" with "EXAMINE Spam" they are present). The only way to show these messages are to select show "Unread" and after show "All", so Roundcube show it. The problem seems to be that Roundcube does not controll at all the Spam folder, if I login via webmail and click on the Spam folder, after I login via telnet in IMAP and do "EXAMINE Spam" the messagges are mark as "Recent". After the telnet test also Roundcube can see the messages. How can fix?

2 1

If not listing only folders with new unread mail - how about . .
by Philip Rhoades 26 Nov '14

26 Nov '14

People, I have had a request for an enhancement on the books for a couple of years but it hasn't gotten anywhere (ie an option to display only folders that have unread mail in them [like ThunderBird] - I have hundreds of folders and subfolders and I am forever scrolling . .). So, how about this as an alternative that would suit my setup: When the Inbox has the focus, allow jumping down to the next folder with unread mail in it by using CTRL-DownArrow ? I guess, for consistency, CTRL-UpArrow should do the reverse. Is it worthwhile to add this to the enhancement request list? Thanks! Phil. -- Philip Rhoades GPO Box 3411 Sydney NSW 2001 Australia E-mail: phil(a)pricom.com.au

4 11

Default folder view
by Phyks 19 Nov '14

19 Nov '14

Hi, Is there a way to set the default view for folders (displayed columns + threaded or not threaded) on a per account basis ? I found a way to handle it globally, through the config, but nothing on a per account basis. Else, is it something that has already been discussed ? Thanks -- Phyks

1 0

Managesieve and special characters
by Phyks 19 Nov '14

19 Nov '14

Hi, I'm new to Roundcube and encountered some problems with the Managesieve plugin and Dovecot. I have some mailboxes with special characters (like "&" and "é") and the plugin escapes them, whereas Dovecot apparently does not need to escape them… So, I had to manually edit the Sieve rules, or Dovecot could not find the matching inbox. I'm not sure whether it's a bug or not, and who is the real responsible for this (Dovecot / PidgeonHole / Roundcube). Have you ever encountered something like this ? Thanks -- Phyks

2 2

1.0.3 the editor just gets worse
by Nick Edwards 18 Nov '14

18 Nov '14

So after update to 1.0.3, many users can no longer right click paste, some crud about browser not capable, funny how it worked earlier what the hell gives with roundcube lately? is there a drop in editor we can use that replaces the mess that exists? or do we move to horde?

2 1

settings missing after update from 1.0.2 to 1.0.3
by ml＠ruggedinbox.com 18 Nov '14

18 Nov '14

Hi all, sorry if this was already discussed before and if we missed something during the update, just wanted to notify that settings like 'username_domain', 'prefer_html', 'max_recipients', 'max_group_members' and 'useragent' were not kept during the update. Using the script ./bin/installto.sh <TARGET-FOLDER> Thank you, RuggedInbox team

1 0

System folder
by absolutely_free＠libero.it 15 Nov '14

15 Nov '14

Hi, how can I prevent users deleting system folder? I created a folder "Archive" and I would like to avoid accidental delete.. I put this in config.inc.php: config.inc.php:$config['default_folders'] = array('INBOX', 'Drafts', 'Sent', 'Junk', 'Trash', 'Archive'); Thank you

3 2

Auto subscribe IMAP folder
by absolutely_free＠libero.it 15 Nov '14

15 Nov '14

Hi, I created at file system level a custom folder "Archive" in every Maildir. Is there a way to let RC auto-suscribe those new folders? I put this in defaults.inc.php $config['default_folders'] = array('INBOX', 'Drafts', 'Sent', 'Junk', 'Trash', 'Archive'); $config['create_default_folders'] = true; But this works only for NEW users (never logged in) have Archive folder already subscribed. Thank you

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users