- Users - Roundcube mailing lists

R: R: Re: System folder
by absolutely_free＠libero.it 01 Dec '14

01 Dec '14

Hi Alec, regarding #1490154, I see you spoke about "archive plugin". Anyway, I haven't such plugin. "Archive" is simple the name that I choose to this goal. >----Messaggio originale---- >Da: absolutely_free(a)libero.it >Data: 01/12/2014 11.21 >A: <users(a)lists.roundcube.net> >Ogg: [RCU] R: Re: System folder > >Hi Alec, >sorry for my delay. >Do you think can I upgrade to 1.1-beta? >When future release will be available, is it recommend upgrade from some- beta >to stable? > > > >>----Messaggio originale---- >>Da: alec(a)alec.pl >>Data: 15/11/2014 9.58 >>A: <users(a)lists.roundcube.net> >>Ogg: Re: [RCU] System folder >> >>On 11/14/2014 12:37 PM, absolutely_free(a)libero.it wrote: >>> I created a folder "Archive" and I would like to avoid accidental delete.. >>> I put this in config.inc.php: >>> >>> config.inc.php:$config['default_folders'] = array('INBOX', 'Drafts', >'Sent', 'Junk', 'Trash', 'Archive'); >> >>Looks like a bug in 1.0. Works for me in 1.1-beta. >> >>http://trac.roundcube.net/ticket/1490154 >> >>-- >>Aleksander 'A.L.E.C' Machniak >>LAN Management System Developer [http://lms.org.pl] >>Roundcube Webmail Developer [http://roundcube.net] >>--------------------------------------------------- >>PGP: 19359DC1 @@ GG: 2275252 @@ WWW: http://alec.pl >>_______________________________________________ >>Roundcube Users mailing list >>users(a)lists.roundcube.net >>http://lists.roundcube.net/mailman/listinfo/users >> > > >_______________________________________________ >Roundcube Users mailing list >users(a)lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users >

2 1

R: Re: System folder
by absolutely_free＠libero.it 01 Dec '14

01 Dec '14

Hi Alec, sorry for my delay. Do you think can I upgrade to 1.1-beta? When future release will be available, is it recommend upgrade from some-beta to stable? >----Messaggio originale---- >Da: alec(a)alec.pl >Data: 15/11/2014 9.58 >A: <users(a)lists.roundcube.net> >Ogg: Re: [RCU] System folder > >On 11/14/2014 12:37 PM, absolutely_free(a)libero.it wrote: >> I created a folder "Archive" and I would like to avoid accidental delete.. >> I put this in config.inc.php: >> >> config.inc.php:$config['default_folders'] = array('INBOX', 'Drafts', 'Sent', 'Junk', 'Trash', 'Archive'); > >Looks like a bug in 1.0. Works for me in 1.1-beta. > >http://trac.roundcube.net/ticket/1490154 > >-- >Aleksander 'A.L.E.C' Machniak >LAN Management System Developer [http://lms.org.pl] >Roundcube Webmail Developer [http://roundcube.net] >--------------------------------------------------- >PGP: 19359DC1 @@ GG: 2275252 @@ WWW: http://alec.pl >_______________________________________________ >Roundcube Users mailing list >users(a)lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users >

1 0

1.0.3 don't show messages in Spam folder (but there are)
by Alessio Cecchi 26 Nov '14

26 Nov '14

Hi, I'm running Roundcube 1.0.3 with dovecot as IMAP server. Some users when login into webmail don't see any messages in the Spam folder (but the messages are on the server and via "telnet" with "EXAMINE Spam" they are present). The only way to show these messages are to select show "Unread" and after show "All", so Roundcube show it. The problem seems to be that Roundcube does not controll at all the Spam folder, if I login via webmail and click on the Spam folder, after I login via telnet in IMAP and do "EXAMINE Spam" the messagges are mark as "Recent". After the telnet test also Roundcube can see the messages. How can fix?

2 1

If not listing only folders with new unread mail - how about . .
by Philip Rhoades 25 Nov '14

25 Nov '14

People, I have had a request for an enhancement on the books for a couple of years but it hasn't gotten anywhere (ie an option to display only folders that have unread mail in them [like ThunderBird] - I have hundreds of folders and subfolders and I am forever scrolling . .). So, how about this as an alternative that would suit my setup: When the Inbox has the focus, allow jumping down to the next folder with unread mail in it by using CTRL-DownArrow ? I guess, for consistency, CTRL-UpArrow should do the reverse. Is it worthwhile to add this to the enhancement request list? Thanks! Phil. -- Philip Rhoades GPO Box 3411 Sydney NSW 2001 Australia E-mail: phil(a)pricom.com.au

4 11

Default folder view
by Phyks 18 Nov '14

18 Nov '14

Hi, Is there a way to set the default view for folders (displayed columns + threaded or not threaded) on a per account basis ? I found a way to handle it globally, through the config, but nothing on a per account basis. Else, is it something that has already been discussed ? Thanks -- Phyks

1 0

Managesieve and special characters
by Phyks 18 Nov '14

18 Nov '14

Hi, I'm new to Roundcube and encountered some problems with the Managesieve plugin and Dovecot. I have some mailboxes with special characters (like "&" and "é") and the plugin escapes them, whereas Dovecot apparently does not need to escape them… So, I had to manually edit the Sieve rules, or Dovecot could not find the matching inbox. I'm not sure whether it's a bug or not, and who is the real responsible for this (Dovecot / PidgeonHole / Roundcube). Have you ever encountered something like this ? Thanks -- Phyks

2 2

1.0.3 the editor just gets worse
by Nick Edwards 18 Nov '14

18 Nov '14

So after update to 1.0.3, many users can no longer right click paste, some crud about browser not capable, funny how it worked earlier what the hell gives with roundcube lately? is there a drop in editor we can use that replaces the mess that exists? or do we move to horde?

2 1

settings missing after update from 1.0.2 to 1.0.3
by ml＠ruggedinbox.com 17 Nov '14

17 Nov '14

Hi all, sorry if this was already discussed before and if we missed something during the update, just wanted to notify that settings like 'username_domain', 'prefer_html', 'max_recipients', 'max_group_members' and 'useragent' were not kept during the update. Using the script ./bin/installto.sh <TARGET-FOLDER> Thank you, RuggedInbox team

1 0

System folder
by absolutely_free＠libero.it 15 Nov '14

15 Nov '14

Hi, how can I prevent users deleting system folder? I created a folder "Archive" and I would like to avoid accidental delete.. I put this in config.inc.php: config.inc.php:$config['default_folders'] = array('INBOX', 'Drafts', 'Sent', 'Junk', 'Trash', 'Archive'); Thank you

3 2

Auto subscribe IMAP folder
by absolutely_free＠libero.it 15 Nov '14

15 Nov '14

Hi, I created at file system level a custom folder "Archive" in every Maildir. Is there a way to let RC auto-suscribe those new folders? I put this in defaults.inc.php $config['default_folders'] = array('INBOX', 'Drafts', 'Sent', 'Junk', 'Trash', 'Archive'); $config['create_default_folders'] = true; But this works only for NEW users (never logged in) have Archive folder already subscribed. Thank you

2 1

Reply: Quoted message in new window; Signature at bottom but cursor at the top? - This used to work?
by Philip Rhoades 12 Nov '14

12 Nov '14

People, In a Reply to a message I always used to use: - A quoted message in a new window - With the signature at the bottom of the email but with the cursor positioned at the top of the email I do this because I nearly always do inline responses to the individual points. I'm sure this used to work but I can't see how to do it now - is it still possible? Thanks, Phil. -- Philip Rhoades GPO Box 3411 Sydney NSW 2001 Australia E-mail: phil(a)pricom.com.au

2 3

roundcube webmail forward to address
by Istvan Gabor 09 Nov '14

09 Nov '14

Dear list users: I have a question regarding roundcube webmail user interface. I would like to forward a message to someone in my contacts list. When I click the forward button the new message with a blank "to:" line appears. How can I insert in this field the recipient's address from my contacts? I couldn't find any button for that. I do not want to type the address. Thanks, Istvan

5 8

Roundcube message retrieval takes >12 seconds
by G H 05 Nov '14

05 Nov '14

I have an IMAP acount with about 1200 folders (nested in some fashion or another). And they are all subscribed as well. When a message is loaded (ie: double clicked) RoundCube is calling: LIST (SUBSCRIBED) "" "*" This results in dovecot/IMAP sending back the list and Apache going to 100% CPU usage during this time (dovecot is fine) -- it takes over 12s to view a single message. Why is RC making a LIST call when a message is fetched? Is there a way to disable this? Thanks, G H

2 1

Re: [RCU] Question about large emails account
by Thomas Bruederli 02 Nov '14

02 Nov '14

On Sun, Nov 2, 2014 at 1:25 PM, Jorge Bastos <mysql.jorge(a)decimal.pt> wrote: > Is there a way to change this option for all existing users, like some text > that I could change via SQL. Have a look at bin/moduserprefs.sh: $ bin/moduserprefs.sh --delete message_sort_col ~Thomas

1 0

Re: [RCU] Question about large emails account
by A.L.E.C 02 Nov '14

02 Nov '14

On 11/02/2014 01:03 PM, Jorge Bastos wrote: > For this matter, I disabled sorting setting: > > $config['message_sort_col'] = 'None'; Setting this in config does not force change in preferences of existing user. Go to messages list menu and change it there. -- Aleksander 'A.L.E.C' Machniak LAN Management System Developer [http://lms.org.pl] Roundcube Webmail Developer [http://roundcube.net] --------------------------------------------------- PGP: 19359DC1 @@ GG: 2275252 @@ WWW: http://alec.pl

2 2

Re: [RCU] Question about large emails account
by A.L.E.C 02 Nov '14

02 Nov '14

On 10/21/2014 05:04 PM, Jorge Bastos wrote: > I have several users that have 20, 30, or some 40GB of emails, and loading > of emails does not always work and fails, only after some tries. The question is how many messages per folder they have and why sorting takes so long (I assume it's SORT/THREAD issue). You can also disable sorting in Roundcube by setting message list sort column to "None". > Question is, should I activate cache to make this work? > > If yes, how much size cache will be on the webmail side, only for headers > right? Yes, messages metadata, but also small message bodies (according to messages_cache_threshold setting, which is 50kB by default). Also remember that Roundcube will not cache all messages in a folder but only these which were accessed/displayed on the list. -- Aleksander 'A.L.E.C' Machniak LAN Management System Developer [http://lms.org.pl] Roundcube Webmail Developer [http://roundcube.net] --------------------------------------------------- PGP: 19359DC1 @@ GG: 2275252 @@ WWW: http://alec.pl

2 2

PHP 5.6 - Roundcube 1.0.3 - Valid certificate
by admin 28 Oct '14

28 Oct '14

Hi gents, I've just upgraded my server to PHP 5.6 and ran straight into the invalid cert issue. It seems that by default, PHP will now check if the certificate is actually valid! That's quite a nice feature but a slight pain when you are mostly dealing with self-signed certificates. Now, I did go ahead and upgrade to an actual valid certificate! Unfortunately, it seems that when you are using : $config['default_host'] = 'ssl://localhost'; or $config['smtp_server'] = 'localhost'; The connection will fail because the hostname you provide isn't actually the one registered to the certificate? Now, I did have a workaround by replace 'localhost' by my external FQDN but that's very elegant or efficient. I'd rather see the connection stay internal if I can. This link <https://bbs.archlinux.org/viewtopic.php?id=187063> does seem to provide some solutions and I've tried using : $config['imap_conn_options'] = array( 'ssl' => array( 'verify_peer' => false, 'verfify_peer_name' => false, ), ); and $config['smtp_conn_options'] = array( 'ssl' => array( 'verify_peer' => false, 'verify_peer_name' => false, ), ); With no results so far. Is there something incredibly obvious that I'm missing? Here is the error log : IMAP Error: Login failed for x@x from x. Could not connect to ssl://localhost:993: Unknown reason in x/rcube_imap.php on line 184 (POST /?_task=login?_task=login&_action=login) I appreciate any help on the matter! Thank you

4 3

Threaded order.
by Ken D'Ambrosio 27 Oct '14

27 Oct '14

Hi, all. When I thread my e-mail, the first e-mail in the thread is the one that shows in my inbox. Is there a way to reverse that order, and make it that the most recent e-mail shows? I'd vastly prefer to know that John sent me a reply five minutes ago, than that Joe started the thread two weeks ago. Thanks! -Ken

2 1

Not all mails shown for selected folder
by Sven Hartge 27 Oct '14

27 Oct '14

Hi! I lately migrated my Squirremail to Roundcube 1.0.2 (with courier-imap 4.10.0 from Debian Wheezy as backend) and at first everything seemed fine. But now more and more users report they don't see all mails when they select a folder, which I am able to verify once I log in from my system with their user and a master-password. It for example only shows three unread mails while at the same time displaying something like "1 to 50 of 342 mails" in the list status. What I did so far: - switched from memcached to db for the index_cache - disabled the index_cache - disabled SORTing in the IMAP server I enabled the imap debug log in a test system which show the same problem. I can see roundcube fetches all messages, but displays only some of them. Sometimes I can get all messages to display after I wildly toggle the search filter from "All" to "Unread" or "Marked" or "with attachments" and back and forth and back again. So far I am quite desperate because there is a mob with pitchforks forming outside of my office. Has anybody seen that behavior? Any idea how to debug this any further? Grüße, Sven. -- Sigmentation fault. Core dumped.

3 9

Can someone explain this Sent thread sorting?
by Philip Rhoades 25 Oct '14

25 Oct '14

People, I attach a screen capture of my Sent box - why does the second item on the list, which is a separate reply to the thread above it, get sorted to position 2? By the date, and being a single mail, it should be much further down the screen . . Thanks, Phil. -- Philip Rhoades GPO Box 3411 Sydney NSW 2001 Australia E-mail: phil(a)pricom.com.au

2 2

Question about large emails account
by Jorge Bastos 21 Oct '14

21 Oct '14

Hi, I have several users that have 20, 30, or some 40GB of emails, and loading of emails does not always work and fails, only after some tries. Question is, should I activate cache to make this work? If yes, how much size cache will be on the webmail side, only for headers right? Thanks in advanced,

1 0

Different Skins for each user
by Vinicius Haas Masiero 21 Oct '14

21 Oct '14

Good Morning guys! i work in a internet provider and my idea is to use one different skin for each domain which i sign in my servers. for example: domain.com - skin1, domain1.com - skin2, etc there a existing plugin for this? sorry for my bad english. ATT *Vinicius Masiero* Técnico Sênior *Telefone:* 51 3553-2049

2 5

only inbox folder after courier migration
by Luciano Gabriel Andino 21 Oct '14

21 Oct '14

Hello, after script migration, the only folder appears in RCU menu is Inbox. The others still are in Maildir "Maildir/.myfolder" and contains its "dovecot-uidlist" and "dovecot-keywords" files. May I need to edit some file? -- Saludos!! Luciano Andino GNU/Linux user #185103 Santa Fe - Argentina -----------------------------------------------

1 0

Issue with login
by absolutely_free＠libero.it 16 Oct '14

16 Oct '14

Hi, I am using RC 1.0.3 on CentOS server, with Dovecot and MySQL backend. I noticed strange behavior with some users; they can't login because "Error invalid request. No data was saved" occours. No problem in logging through pop3 or imap. I had no problem with other users on the same server. How can I investigate this? Thank you

1 0

Help with encryption
by Felix Rubio Dalmau 15 Oct '14

15 Oct '14

Hi everybody. I have been diving for a while in roundcube mail archives, and I have seen many threads about supporting gpg, etc. To me, using mailvelop it is more than enough, but I do not have the required knowledge to modify roundcube to display the attachments "encrypted.asc" in the body of the message. Could somebody point me in the proper direction? Regards, Felix

1 0

Password change plugin not working
by Robert Moskowitz 15 Oct '14

15 Oct '14

The password change plugin is not working. I am using the same config file I used on my old test server where it worked. Does this plugin use php-mcrypt (which I do not have yet for armv7)? I am using in the config.inc.php: I am using md5crypt for my user passwords in the postfix database. $config['password_db_dsn'] = 'mysql://password@localhost/postfix'; $config['password_query'] = 'UPDATE mailbox SET password=%c WHERE username=%u limit 1;'; Which worked before. But in the main config.inc.php, I have:

4 5

Finding spammer reply-to addresses without logging in to every account
by Bob OHara 15 Oct '14

15 Oct '14

Hello We use Roundcube for our ISP's domain customer webmail. An account has been compromised and the spammers reply to addy put in. Any way to find which account contains this address in reply to without logging in to them all? Bob

2 1

login fails
by Robert Moskowitz 14 Oct '14

14 Oct '14

Even though the install test succeeds... From the roundcubeinstall webpage, I run the Test IMAP Config and I can log in. I try the same userid and password (full ID@doman as above), and it fails. maillog is unhelpful: Oct 14 08:34:24 z9m9z dovecot: auth: mysql: Connected to localhost (postfix) Oct 14 08:34:24 z9m9z dovecot: imap-login: Login: user=<rgm(a)htt-consult.com>, method=PLAIN, rip=208.83.67.180, lip=208.83.67.180, mpid=5626, secured Oct 14 08:34:24 z9m9z dovecot: imap(rgm(a)htt-consult.com): Disconnected: Logged out bytes=29/405 Oct 14 08:50:08 z9m9z dovecot: auth: mysql: Connected to localhost (postfix) Oct 14 08:50:08 z9m9z dovecot: imap-login: Login: user=<rgm(a)htt-consult.com>, method=PLAIN, rip=208.83.67.180, lip=208.83.67.180, mpid=5655, secured Oct 14 08:50:09 z9m9z dovecot: imap(rgm(a)htt-consult.com): Disconnected: Logged out bytes=12/342 1st is from install page and 2nd from webmail login page. And why method=PLAIN? (I think I asked this question over a year ago when I was last testing Roundcube...)

1 1

spell checker
by Robert Moskowitz 14 Oct '14

14 Oct '14

I am installing roundcubemail on a Redsleeve6 server from the tarball: roundcubemail-1.0.3.tar.gz As the RSEL repo does not provide a roundcubemail rpm (like Centos6 does). So I am going through the install (I now have all dependencies other than php-mcrypt) and see the following: // Set the spell checking engine. Possible values: // - 'googie' - the default // - 'pspell' - requires the PHP Pspell module and aspell installed // - 'enchant' - requires the PHP Enchant module // - 'atd' - install your own After the Deadline server or check with the people at http://www.afterthedeadline.com before using their API // Since Google shut down their public spell checking service, you need to // connect to a Nox Spell Server when using 'googie' here. Therefore specify the 'spellcheck_uri' $config['spellcheck_engine'] = 'googie'; And the install web page said that if you select google, then the mail is sent to google for spell checking? But here in the config file, it implies that 'service' is no longer available and there is a spellcheck_uri, but I don't see the syntax for that in the config file. So where can I get instructions for the spell checking? Or to just turn it off for now? pspell and enchant do not seem to be options.

2 2

Problems with mysql connection
by Vinicius Haas Masiero 14 Oct '14

14 Oct '14

Hi Guys! im newbie in roundcube business and i have got a problem with connection with mysql database. there is my configuration: config.inc.php // Database connection string (DSN) for read+write operations // Format (compatible with PEAR MDB2): db_provider://user:password@host/database // Currently supported db_providers: mysql, pgsql, sqlite, mssql or sqlsrv // For examples see http://pear.php.net/manual/en/package.database.mdb2.intro-d$ // NOTE: for SQLite use absolute path: 'sqlite:////full/path/to/sqlite.db?mode=$ $config['db_dsnw'] = 'mysql://roundcube:xxxxxxx@localhost/roundcube'; i already tested my database connection with a php script: <?php $banco = "roundcube"; $usuario = "roundcube"; $senha = "xxxxxxx"; $hostname = "localhost"; $conn = mysql_connect($hostname,$usuario,$senha); mysql_select_db($banco) or di$ if (!$conn) {echo "Não foi possível conectar ao banco MySQL. "; exit;} else {echo "Parabéns!! A conexão ao banco de dados ocorreu normalmente!. ";} mysql_close(); ?> this script worked and shows me the database connection is ok. the error message occurs when i access the address "http://192.168.56.101/roundcubemail/": DATABASE ERROR: CONNECTION FAILED! Unable to connect to the database! Please contact your server-administrator. In error logs this lines appeared: [14-Oct-2014 09:26:29 -0300]: DB Error: [1046] No database selected (SQL Query: SELECT vars, ip, changed, now() AS ts FROM session WHERE sess_id = '1v2pbh7mn0obojf8eu864mlgn1') in /usr/share/roundcubemail/program/lib/Roundcube/rcube_db.php on line 467 (GET /roundcubemail/) [14-Oct-2014 09:26:29 -0300]: DB Error: [1046] No database selected (GET /roundcubemail/) [14-Oct-2014 09:26:29 -0300]: DB Error: [1046] No database selected (SQL Query: SELECT * FROM identities WHERE del <> 1 AND user_id = NULL ORDER BY `standard` DESC, name ASC, identity_id ASC) in /usr/share/roundcubemail/program/lib/Roundcube/rcube_db.php on line 467 (GET /roundcubemail/) [14-Oct-2014 09:26:29 -0300]: DB Error: [1062] Duplicate entry '1v2pbh7mn0obojf8eu864mlgn1' for key 'PRIMARY' (SQL Query: INSERT INTO session (sess_id, vars, ip, created, changed) VALUES ('1v2pbh7mn0obojf8eu864mlgn1', 'dGVtcHxiOjE7bGFuZ3VhZ2V8czo1OiJlbl9VUyI7dGFza3xzOjU6ImxvZ2luIjs=', '192.168.56.1', now(), now())) in /usr/share/roundcubemail/program/lib/Roundcube/rcube_db.php on line 467 (GET /roundcubemail/) someone could help me? ATT -- *Vinicius Masiero* Técnico de Informática Sênior *Telefone:* 51 3553-2049

1 0

temp directory
by Robert Moskowitz 14 Oct '14

14 Oct '14

I am looking at my old test setup on Centos6, and the tempdir is set to: main.inc.php:$rcmail_config['temp_dir'] = '${_tmppath}'; I can't find where the variable tmppath is defined though at a guess it is some Centos apache or php default temp path? I see that the main.inc.php is gone and the format now is: config.inc.php:$config['temp_dir'] = '<your temp directory here>'; So I tried: config.inc.php:$config['temp_dir'] = '${_tmppath}'; And of course this did not work. I was not supprised. How might I figure out how tmppath is defined, or where is a better place for temp files than under /usr/share? Like /tmp/? thanks

3 2

Empty startup greeting (localhost:993) [WAS: debian jessie amd-64, roundcube 1.0.3, nginx, postfix, dovecot, mysql]
by shmick＠riseup.net 14 Oct '14

14 Oct '14

how is the following error alleviated ? IMAP Error in /roundcube/program/lib/Roundcube/rcube_imap.php (184): Login failed for user from 1.2.3.4. Empty startup greeting (localhost:993) thanks in advance for any solutions

2 3

Sorting identities
by Philip Rhoades 13 Oct '14

13 Oct '14

People, I have 24 identities now - is there some way I can sort them when in the selection / managing windows? Thanks, Phil. -- Philip Rhoades GPO Box 3411 Sydney NSW 2001 Australia E-mail: phil(a)pricom.com.au

1 0

Time for new HTML Editor
by Nick Edwards 11 Oct '14

11 Oct '14

Evening, This has been mentioned on the list before, but I think it's time to make a stand and call for a new more intelligent HTML editor for in time the next release. The constant stream of complaints for when replying and trying to quote inline is becoming most annoying for us and some others I've talked to on IRC, the inability to enter comments inline without converting to TEXT, or editing the HTML, without making it appear the original sender, said what you are saying, is a pure joke. Try telling the average 80yo person how to edit the HTML insert this that save, click blockquote blah blah blah then type in your reply, this might be fine for those who know how and want to waste the time doing so,and reply to one or two message, but thats half a minute per message off someones life that doesnt need to be, amongst the heated anger they have for it being this way. And for many reasons many users need HTML so can not convert to text in replies. We never had to do this in squirelmail, we dont have to do it in gmail, hotmail, yahoo, etc etc etc So I think its high time for a new editor, one that works! or do we need to go back to squirellmail? At ;least we could hit enter and it would break up the quote lines the way they should.

6 13

courier-imap to dovecot
by Luciano Gabriel Andino 11 Oct '14

11 Oct '14

hello, I am using RCU and courier-imap server with 30000 emails folders and not possible to use (more than a minute to see email list). Change server to dovecot will help in speed terms? Do I need to change something in user boxes? -- Saludos!! Luciano Andino GNU/Linux user #185103 Santa Fe - Argentina -----------------------------------------------

2 1

Our Wish List for Encryption Browser Extensions
by Thomas Bruederli 11 Oct '14

11 Oct '14

Dear Roundcube devs and list lurkers PGP encryption for Roundcube is a repeatedly popping up topic. Of course we're also very much interested in providing a solid solution for end-to-end encryption as a standard part of Roundcube. I therefore tried to summarize the current situation in our wiki [1] and compiled a few wishes to current and future encryption browser plugins - from a webmail programmer's point of view of course: http://roundcubeinbox.wordpress.com/2014/10/10/our-wish-list-for-encryption… I think the approach with a locally installed browser extension to do the encryption part is the most sustainable at the moment. While Mailvelope [2] already does a pretty good job, please also give your attention to pEp [3] which adds some more simplicity and automation on top of standard encryption methods like PGP and S/MIME. After a recent meeting with the pEp developers, I'm really looking forward to see this become available, eventually also as a browser extension. So please support their crowd-funding campaign [4] and help them to make encryption easy for everyone. Kind regards, Thomas [1] http://trac.roundcube.net/wiki/Dev_Encryption [2] https://www.mailvelope.com/ [3] http://pep-project.org/ [4] http://go.pep-project.org/

1 0

debian jessie amd-64, roundcube 1.0.3, nginx, postfix, dovecot, mysql
by shmick＠riseup.net 09 Oct '14

09 Oct '14

im having a lot of difficulty getting RC to work in debian jessie and since there isn't a package in the repos ive come here for some much needed help in summary, what is the correct procedure to get all above talking to each other ? are there any other dovecot/postfix packages that are pre requisites ? what needs to be added to: /etc/dovecot/dovecot-sql.conf.ext ? /etc/dovecot/conf.d/auth-sql.conf.ext ? /etc/dovecot/conf.d/10-auth.conf ? i have next to no experience with PHP but ive checked the options against /etc/php5/fpm/php.ini these are missing: - zend.ze1_compatibility_mode disabled - NA - suhosin.session.encrypt disabled - NA - magic_quotes_runtime disabled - NA - magic_quotes_sybase disabled - NA php has the required compiled in modules regarding nginx, ive not installed it from repos and it has many components disabled but it does support fast cgi, php-fpm, etc, and i can submit php web forms from the RC installer tests everything is ok except getting dovecot auth working after finishing the installer and going to login i can never complete login browser: "connection to storage server failed" mail.log dovecot: imap-login: Disconnected (no auth attempts in 0 secs): no errors logged for nginx or roundcube

4 12

R: [Roundcube] ACL plugin
by Gianluca Calloni 08 Oct '14

08 Oct '14

HI.. Nobody can help me?? Luca Da: users-bounces(a)lists.roundcube.net [mailto:users-bounces@lists.roundcube.net] Per conto di Gianluca Calloni Inviato: martedì 7 ottobre 2014 17:35 A: users(a)lists.roundcube.net Oggetto: [RCU] [Roundcube] ACL plugin Hi to all I'm trying to use roundcube. I would like to understand how the ACL plugin works cause i'm interested in sharing mailbox. We have dovecot + postfix Roundcube is installed and working fine. I add in /var/lib/roundcube/config/main.inc.php the following $rcmail_config['plugins'] = array('acl'); But in webmail i can not see the relative ACL areas where the user can set the share settings. Could someone help me?? Thank's in advance

1 0

Redsleeve install, some modules missing
by Robert Moskowitz 07 Oct '14

07 Oct '14

Redsleeve is the arm port of Centos 6. So I am installing from the tar from roundcube.net and the installer script reports that: Checking PHP extensions The following modules/extensions are /required/ to run Roundcube: DOM: NOT OK(Could be loaded. Please add in php.ini; See http://www.php.net/manual/en/book.dom.php) The next couple of extensions are /optional/ and recommended to get the best performance: FileInfo: OK Mcrypt: NOT AVAILABLE(See http://www.php.net/manual/en/book.mcrypt.php) Intl: NOT AVAILABLE(See http://www.php.net/manual/en/book.intl.php) I don't see in the manual what to add to php.ini. Please advise. I have tried to find mcrypt (yum install mcrypt libmcrypt), but these are not the mcrypt it seems to want. And I don't know were to find the intl.php. thank you

3 7

Re: [RCU] Redsleeve install, some modules missing
by Robert Moskowitz 07 Oct '14

07 Oct '14

On 10/07/2014 05:25 PM, Reindl Harald wrote: > > > Am 07.10.2014 um 23:10 schrieb Robert Moskowitz: >> On 10/07/2014 04:02 PM, Matthias Sitte wrote: >>> install the 'php-intl' and 'php-mcrypt' packages. should add ini files >>> to /etc/php5/mods-available automatically. extensions are loaded by >>> 'extension=<name>.so' statements [1]. >> >> Installed php-intl, but no php-mcrypt. >> >> Now have to add php-intl to php.ini > > > > Originally I did not even have DOM, and was told to install > > php-xml. Now I have to work out the php.ini for it > > you have to do *what*? > > look at /etc/php.d/ or "rpm -q --filesbypkg php-xml" > as for any other package - the php modules all ship > their INI stuff Oops. I THOUGHT I restarted httpd, but obviously I did not, as restart reloaded the .ini and now I only need mcrypt. > > man you still have to learn a lot after that many years > Yes. I do. And more that I forget; I would like to blame my dyselxia, but other factors are at work here. I have extensive notes, and I come back to them 6 months later and spend a lot of time puzzling them out. Actually they DO tend to work.

1 0

Re: [RCU] Redsleeve install, some modules missing
by Robert Moskowitz 07 Oct '14

07 Oct '14

On 10/07/2014 03:51 PM, Reindl Harald wrote: > > Am 07.10.2014 um 21:43 schrieb Robert Moskowitz: >> Redsleeve is the arm port of Centos 6. So I am installing from the tar >> from roundcube.net and the installer script reports that: >> >> Checking PHP extensions >> >> The following modules/extensions are /required/ to run Roundcube: >> >> DOM: NOT OK(Could be loaded. Please add in php.ini; See >> http://www.php.net/manual/en/book.dom.php) >> >> The next couple of extensions are /optional/ and recommended to get the >> best performance: FileInfo: OK >> >> Mcrypt: NOT AVAILABLE(See http://www.php.net/manual/en/book.mcrypt.php) >> Intl: NOT AVAILABLE(See http://www.php.net/manual/en/book.intl.php) >> >> I don't see in the manual what to add to php.ini. Please advise. >> >> I have tried to find mcrypt (yum install mcrypt libmcrypt), but these >> are not the mcrypt it seems to want. > > it needs php-extensions and not just system libraries > with some luck there is a EPEL repo for ARM > >> And I don't know were to find the intl.php > > as above > No package php-extensions available. Going to have to work with Gordon about all the things I am not finding in his repos.

1 0

Trying to download Roundcube
by Robert Moskowitz 07 Oct '14

07 Oct '14

Over a year ago I did a test Roundcube install on Centos6. I am now building a Redsleeve6 (Centos on ARM) server. Given that the Centos repo is backdated on Roundcube, and the arm repo does not even have it, I have to go to the source and work from there. So I go to: http://roundcube.net/download/ and click on download complete (using firefox on Fedora20). I get the waiting on server for a while, and then nothing. No download started. Nothing. What is up? Or can someone give me a wget line that I can run directly from the arm (Cubietruck) server to get it where I need it anyway? thanks

1 1

[Roundcube] ACL plugin
by Gianluca Calloni 07 Oct '14

07 Oct '14

Hi to all. I'm trying to use roundcube. I would like to understand how the ACL plugin works cause i'm interested in sharing mailbox. We have dovecot + postfix Roundcube is installed and working fine. I add in /var/lib/roundcube/config/main.inc.php the following $rcmail_config['plugins'] = array('acl'); But in webmail i can not see the relative ACL areas where the user can set the share settings. Could someone help me?? Thank's in advance

1 0

Roundcube sieverules plugin -- cannot connect to sieve server
by Sha Ner 07 Oct '14

07 Oct '14

Hello, I'm trying to setup the sieverules plugin for roundcube. When going to settings->filters I get an error 'Unable to connect to sieve server" My setup is virtual email using dovecot,postfix,mysql,postfixadmin/roundcube I've confirmed dovecot-managesieve is working: root@mail /var/log # netstat -anop |grep 4190 tcp 0 0 0.0.0.0:4190 0.0.0.0:* LISTEN 23613/dovecot off (0.00/0/0) root@mail /var/log # nc localhost 4190 "IMPLEMENTATION" "Dovecot Pigeonhole" "SIEVE" "fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave imapflags notify" "NOTIFY" "mailto" "SASL" "PLAIN LOGIN" "STARTTLS" "VERSION" "1.0" OK "Dovecot ready." Here are the relevant options for plugins/sieverules/config.inc.php: $config['sieverules_host'] = 'localhost'; $config['sieverules_port'] = 4190; $config['sieverules_auth_type'] = null; $config['sieverules_usetls'] = FALSE; In my apache2.log: [Tue Oct 07 11:12:43 2014] [error] [client xx.xx.xx.xx] $addr cannot be empty (): , referer: http://mail.example.org/webmail/?_task=mail [Tue Oct 07 11:12:43 2014] [error] [client xx.xx.xx.xx] Not currently connected (1): , referer: http://mail.example.org/webmail/?_task=mail Any help would be greatly appreciated.

1 0

Re: [RCU] debian jessie amd-64, roundcube 1.0.3, nginx, postfix, dovec ot, mysql
by paulgms＠juno.com 07 Oct '14

07 Oct '14

Ben,just curiousdo you have relatives from the St Louis Missouri area or the Detroit area? Paul Schmidt ____________________________________________________________ Odd Trick Fights Diabetes "Unique" Proven Method To Control Blood Sugar In 3 Weeks. Watch Video. http://thirdpartyoffers.juno.com/TGL3131/5433c728115a74728591cst03duc

1 0

new user accounts
by Sales 06 Oct '14

06 Oct '14

Dear Sir / Madam, we need to create a few more users as following: hannah(a)floridabluebay.gr sp(a)floridabluebay.gr julia(a)floridabluebay.gr How can we do this??? Vivienne Theodorakopoulou Florida Blue Bay Psathopyrgos, Patras, Achaia Peloponnese Tel: +30 2610 931279 / 931230 Fax: +30 2610 931977 http://www.floridabluebay.gr/en

3 2

error in userlogins
by absolutely_free＠libero.it 03 Oct '14

03 Oct '14

Hi, what is the difference between: [03-Oct-2014 09:22:00 +0200]: Failed login for XXXXXXXXXX(a)domain.net from xxx. xx.xx.xx in session 8sknv4fhhbd73aof6hhfosrrq0 (error: 1) and [03-Oct-2014 09:32:54 +0200]: Failed login for XXXXXXXXXX(a)domain.net from xxx. xxx.xx.xx in session nuc26cnhii53glp533k7f1t0q1 (error: 0) error 1 and error 0? Thank you

2 1

Update 1.0.3 released
by Thomas Bruederli 29 Sep '14

29 Sep '14

Dear Roundcube users We're proud to announce the next service release to the stable version 1.0 of Roundcube webmail. It contains some bug fixes and improvements we considered important for the long term support branch of Roundcube. See the full changelog here: http://trac.roundcube.net/wiki/Changelog It's considered stable and we recommend to update all productive installations of Roundcube with this version. Download it from http://roundcube.net/download. And remember: backup before updating! Kind regards, Thomas

1 0

Your session is invalid or expired. // Already checked timezone.
by Sebastian 29 Sep '14

29 Sep '14

Hello Mailinglist, I’m trying to get Roundcube 1.0.2 to run. I’m using nginx-1.6.1_1,2 with php55-5.5.16. I access Roundcube via SSL, using Chrome, (Mobile) Safari or Firefox. With all browsers I get the message “Your session is invalid or expired.” when trying to log in. Clearing the cache did not help. Curiously even with debugging, no errors are logged. Google seems useless in this case, the most common issue may be the timezone, which I checked. I’m stuck here and would appreciate any helpful input! Thank you, Sebastian

3 4

configuring roundcube for mark spam with rspamd
by Vinicius Haas Masiero 23 Sep '14

23 Sep '14

Good morning! i read some articles wich shows steps for a spam button configuration, working with Spamassassin software. exists a way to configure this button with rspamd software? sorry for my bad english. ATT *Vinicius Masiero* Técnico Sênior *Telefone:* 51 3553-2049

1 0

roundcube and php 5.4.33: fgets(): SSL read operation timed out
by Michael Grimm 22 Sep '14

22 Sep '14

Hi -- My setup: roundcube-1.0.2 + nginx-1.6.2 in a FreeBSD-10 jail. RC will connect to a recent dovecot server in another jail at the same host. Recently, after upgrading php from 5.4.32 to 5.4.33 roundcube will refuse to connect to dovecot: | roundcube: PHP Warning: fgets(): SSL read operation timed out in \ | /...path2rc.../roundcube/program/lib/Roundcube/rcube_imap_generic.php on line 200 Recompiling every port involved and restarting both involved jails hasn't been successful. Only, reverting back to php 5.4.32 made RC work again. Is anyone running into this as well? Any idea how to debug this? Thanks and regards, Michael

4 4

no messages listed in search result
by Stefan Dorn 19 Sep '14

19 Sep '14

hi, after upgrading vom rc 0.9.5 to 1.0.2 everything works fine for me but the search function does not. in some cases, the message list remains empty while the search result says "message 1 to 50 of 342". (see attachment) for example i want to search a sender by typing his "domain" or "domain.tld" of the email address, the message list is empty. when i search for "user(a)domain.tld", all search results are displayed in the message list. for other email addresses / domains / words ("gmail.com" for example), the search function works. same behaviour in both original themes. in rc 0.9.5 in all cases the same search works fine. i can't find any hint in the logfiles. any ideas? what kind of additional information do you need? regards stefan

1 0

Signature options
by peterferguson016＠gmail.com 18 Sep '14

18 Sep '14

I am new to roundcube and having trouble setting up my signature. Have used 5 other eimail prgrams and never encontered this before. I see in "settings" I can select preferencesm I selct tghe section "composing messages"M I see main options with boxes I can chech and pull down menus. Below thgat is signature options but only one pulldown "automatically add signature" ( I selected 'always'. I checked the box saying "when replying remove original signature from message". That's it. There is no place for me to input what I want my signature to say. Any help would be appreciated. Not sure if's a roundcube problem or ISP problem. Sent wirelessly from my BlackBerry device on the Bell network. Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell.

2 1

imap_highlight and raw_managesieve
by Francesco Perna 16 Sep '14

16 Sep '14

Hi everyone, we just released 2 plugins: - raw_managesieve (https://github.com/20tab/raw_managesieve) it is based on the official managesieve but allows directly writing sieve code - imap_highlight (https://github.com/20tab/imap_highlight) once enabled it automatically assign a color to the email if an imapflag is in the form #xxxxxx Hope they will be useful Regards -- Francesco Perna http://20tab.com

1 0

Can't figure out how to use new Plugins installer system?
by Ed W 10 Sep '14

10 Sep '14

Hi, I'm migrating from an older roundcube and wanted to try the new system to install plugins. Obviously too stupid to work it out though... So I: - create composer.json from the default compser.json-dist - download composer.phar to the root of the roundcube install - run: "php composer install" (seems to work as expected) - Now I try and add dovecot_impersonate as an extra plugin: # cat composer.json { "name": "roundcube/roundcubemail", "description": "The Roundcube Webmail suite", "license": "GPL-3.0+", "repositories": [ { "type": "composer", "url": "http://plugins.roundcube.net/" } ], "require": { "php": ">=5.3.0", "roundcube/plugin-installer": ">=0.1.3", "cor/dovecot_impersonate": ">=2.0.2" }, "minimum-stability": "dev" } - It pulls down a bunch of git repos, but leaves everything in ./vendor? There are no prompts to install anything? What to do now? # php composer.phar update -vvv Reading ./composer.json Loading config file ./composer.json Executing command (CWD): git describe --exact-match --tags Executing command (CWD): git branch --no-color --no-abbrev -v Executing command (CWD): hg branch Executing command (CWD): svn info --xml Loading composer repositories with package information Downloading http://plugins.roundcube.net/packages.json Writing /root/.composer/cache/repo/http---plugins.roundcube.net/packages.json into cache Downloading https://packagist.org/packages.json Writing /root/.composer/cache/repo/https---packagist.org/packages.json into cache Updating dependencies (including require-dev) Reading /root/.composer/cache/repo/https---packagist.org/p-provider-active.json from cache Reading /root/.composer/cache/repo/https---packagist.org/p-provider-archived.json from cache Reading /root/.composer/cache/repo/https---packagist.org/p-provider-latest.json from cache Reading /root/.composer/cache/repo/https---packagist.org/p-provider-stale.json from cache Reading /root/.composer/cache/repo/https---packagist.org/provider-roundcube$plugin-installer.json from cache Reading /root/.composer/cache/repo/https---packagist.org/provider-curl$curl.json from cache - Installing curl/curl (dev-master 82cac3f) Cloning 82cac3f504e2c6b31eb0f379dc2f80f6d0e80cbb Executing command (CWD): git clone --no-checkout 'git://github.com/php-mod/curl.git' '/var/www/webmail.mailasail.com/htdocs/vendor/curl/curl' && cd '/var/www/webmail.mailasail.com/htdocs/vendor/curl/curl' && git remote add composer 'git ://github.com/php-mod/curl.git' && git fetch composer Executing command (/var/www/webmail.mailasail.com/htdocs/vendor/curl/curl): git remote set-url --push origin 'git@github.com:php-mod/curl.git' Executing command (/var/www/webmail.mailasail.com/htdocs/vendor/curl/curl): git branch -r Executing command (/var/www/webmail.mailasail.com/htdocs/vendor/curl/curl): git checkout 'master' Executing command (/var/www/webmail.mailasail.com/htdocs/vendor/curl/curl): git reset --hard '82cac3f504e2c6b31eb0f379dc2f80f6d0e80cbb' REASON: cor/dovecot_impersonate dev-master requires curl/curl dev-master -> satisfiable by curl/curl[dev-master]. - Installing cor/dovecot_impersonate (dev-master f8b94a8) Cloning f8b94a814c5ebffa463f7bf34fe8fe31f2882646 Executing command (CWD): git clone --no-checkout 'git://github.com/corbosman/dovecot_impersonate.git' '/var/www/webmail.mailasail.com/htdocs/vendor/cor/dovecot_impersonate' && cd '/var/www/webmail.mailasail.com/htdocs/vendor/cor/dovecot _impersonate' && git remote add composer 'git://github.com/corbosman/dovecot_impersonate.git' && git fetch composer Executing command (/var/www/webmail.mailasail.com/htdocs/vendor/cor/dovecot_impersonate): git remote set-url --push origin 'git@github.com:corbosman/dovecot_impersonate.git' Executing command (/var/www/webmail.mailasail.com/htdocs/vendor/cor/dovecot_impersonate): git branch -r Executing command (/var/www/webmail.mailasail.com/htdocs/vendor/cor/dovecot_impersonate): git checkout 'master' Executing command (/var/www/webmail.mailasail.com/htdocs/vendor/cor/dovecot_impersonate): git reset --hard 'f8b94a814c5ebffa463f7bf34fe8fe31f2882646' REASON: Required by root: Install command rule (install cor/dovecot_impersonate dev-master|install cor/dovecot_impersonate 2.0.2) Executing command (/var/www/webmail.mailasail.com/htdocs/vendor/roundcube/plugin-installer): git log -n1 --pretty=%ct '0.1.5' Executing command (/var/www/webmail.mailasail.com/htdocs/vendor/curl/curl): git log -n1 --pretty=%ct '82cac3f504e2c6b31eb0f379dc2f80f6d0e80cbb' Executing command (/var/www/webmail.mailasail.com/htdocs/vendor/cor/dovecot_impersonate): git log -n1 --pretty=%ct 'f8b94a814c5ebffa463f7bf34fe8fe31f2882646' Reading ./composer.lock Writing lock file Generating autoload files

3 3

Resolved: Roundcube hangs on Sending/Saving
by Ed W 10 Sep '14

10 Sep '14

Hi, I recently ran into a problem which I'm documenting here in the hope it saves others some time (possibly also RC devs could be aware and consider logging a warning) The symptoms are that roundcube mostly works, but hangs with a Saving/Sending message at the bottom of the screen if you try and save/send. The browser is "frozen", in that you cannot click on other items on the page, and it's necessary to close the browser tab or do a full page reload to escape. The resolution was to remove security headers from my default nginx config: #add_header X-Frame-Options DENY; #add_header X-Content-Type-Options nosniff; I presume that the iframe option interferes with save/send process, hence why it breaks. I think it's not unreasonable, however, just documenting the problem here since it's a common option shown as a good default for a tightly secured webserver setup. Thanks to all developers for the excellent Roundcube product! Ed W

2 1

Roundcube loadbalancing
by bertrand.caplet＠chunkz.net 08 Sep '14

08 Sep '14

Hey, I'm trying to have roundcube loadbalancing in 2 servers : fle.chunkz.net and ams.chunkz.net I'm using memcache to loadbalance the php sessions. I tried session_storage = php or session_storage = memcache. But none is working... I watch the cache on both servers with phpMemcachedAdmin it seems alright. But whenever it changes server for the client it says "session invalid or expired" thank you in advance, Regards, B. Caplet

2 1

Adding a signature in Roundcube Webmail 0.9.5
by Exam Centre 05 Sep '14

05 Sep '14

Can anyone help please? I click on signature when I am composing a mail and cannot change it there. Thanks.

2 2

RC upgrade from 0.95 to 1.0.2
by S Loewenthal 05 Sep '14

05 Sep '14

Hi, I thought I should have another shot at upgrading from 0.95 to 1.0.2 ( some months ago I tried to 1.0.1 but rolled back because it failed) This time the runinstaller script gave me this error with a broken RC installation, so I have rolled back again. I'd be grateful if somebody could tell me what this error message meant: Running update script at target... NOTICE: Obsolete config options: (You still have some obsolete or inexistent properties set. This isn't a problem but should be noticed) - 'mime_magic' Do you want me to fix your local configuration? (y/N) y . backing up the current config file(s)... . writing /www/roundcube/config/config.inc.php... Done. Your configuration files are now up-to-date! WARNING: File type detection doesn't work properly! Please check the 'mime_magic' config option or the finfo functions of PHP and run this script again. Executing database schema update. ERROR: Error in DDL upgrade 2013061000: [1060] Duplicate column name 'expires'Updating database schema (2013061000)... [FAILED] All done. Lots of thanks, So -- wherever you go, there you are

1 0

Body of mails not displayed v1.0.2
by Philip Rhoades 30 Aug '14

30 Aug '14

People, I have two small mails from DLink - one of which contains base64 encoding but neither display the body of the mail in RCM but they both are readable with Mutt. I've looked at the headers etc and everything looks OK to me - is anyone motivated to look at them to work out what the problem is? Thanks, Phil. -- Philip Rhoades GPO Box 3411 Sydney NSW 2001 Australia E-mail: phil(a)pricom.com.au

2 3

When and How to cache?
by Sven Hartge 29 Aug '14

29 Aug '14

Hi! I am currently deploying Roundcube as the main webmailer for my university. So far my beta-tests with a select group of users have been very positive. But before I push Roundcube on all my users who use webmail I wondered about the caching feature. When do I use the index cache? And how do I cache? Inside my MySQL database or via a memcached instance? My webmail service does not run on the same server as the IMAP service but on a different VM and in a different network but RTT between both is below 2ms. The documentation mentions that caching may even reduce performance in some situations but does not specify which situations. So far I have not be able to experience any slowdowns or speedups while using the index cache so I don't know if I gain anything by using or not-using it. Can anyone share any experience with the cache feature to help me decide. Grüße, Sven. -- Sigmentation fault. Core dumped.

2 2

Remove responses of configurations
by T.I. Alfresa 28 Aug '14

28 Aug '14

Good day. Sorry for my English. I'm with Roundcube version 1.0.2. I would remove the "Response" item listing of the settings. Leaving only "Preferences", "Folders" and "Identities". Since alread, thank you.

1 0

Re: [RCU] ssl breaks roundcube ?
by ml＠ruggedinbox.com 23 Aug '14

23 Aug '14

Hi Reindl, >> in particular: >> "X-Frame-Options" => "DENY" > > why are you doing that on the webserver? Because that's the best practice! Have a look at this: https://cipherli.st On 2014-08-23 02:50, Reindl Harald wrote: > Am 23.08.2014 um 04:17 schrieb ml(a)ruggedinbox.com: >> Hi so after some testing, it looks like the lighttpd setting: >> >> setenv.add-response-header = ( >> "Strict-Transport-Security" => "max-age=63072000; >> includeSubDomains", >> "X-Frame-Options" => "DENY" >> ) >> >> in particular: >> "X-Frame-Options" => "DENY" > > why are you doing that on the webserver? > >> was causing the issue. >> >> There is some bug tracking about it and roundcube ( >> http://trac.roundcube.net/ticket/1487037 ) >> and it is also documented in the 'defaults.inc.php' file: >> >> // X-Frame-Options HTTP header value sent to prevent from >> Clickjacking. >> // Possible values: sameorigin|deny. Set to false in order to disable >> sending them >> $config['x_frame_options'] = 'sameorigin'; >> >> anyway, could you please suggest the best setting of both roundcube >> and lighttpd ? >> (should lighttpd be set to 'sameorigin' or should roundcube be set to >> 'deny' ?) > > just don't configure a webserver in a way it overrides applications > and if you do so at least only with "sameorigin"

1 0

ssl breaks roundcube ?
by ml＠ruggedinbox.com 23 Aug '14

23 Aug '14

Hi all! We recently improved our https configuration on lighttpd: https://www.ssllabs.com/ssltest/analyze.html?d=ruggedinbox.com but something seems to have broken roundcube .. can't properly attach files, can't send emails, sometimes can't logout. We are pointing the finger at ssl because when using roundcube as a Tor hidden service (thus bypassing ssl), everything works ok and smooth. Try yourself: username: demo password: demo11 under ssl: https://ruggedinbox.com/rc as a Tor hidden service: http://s4bysmmsnraf7eut.onion/rc What do you think ? Thanks for supporting! RuggedInbox team

1 1

Error on Moving/Copying messages from INBOX to nested folders within INBOX; works from INBOX to other Top_Level folders
by Admin DC 22 Aug '14

22 Aug '14

Hello, I first tried posting this with my gmail and didn't see it showing up on the archive. So I wanted to make sure this went through so I used a non-free email domain. If I created a duplicate thread I apologize. Now on to the issue at hand. We just oddly started experiencing this issue. We've spent quite a bit of time troubleshooting with logging increased on both our IMAP servers (Debian Wheezy 7.6 64bit with dovecot vers 2.1.7-7+deb7u1 ) I am absolutely able to reproduce this on numerous accts, even with logging up to 8 we do not see any "ERROR" or any reason why the copy and expunge would fail. Our production copy of webmail was older (0.9-rc), so I suspected possibly it was a bug or something wrong with that version, so we created a "ourwebmail-new.foo.com" domain and do an inplace upgrade on our database (to preserve our address book and other client info), with no issues on upgrade to v 1.0.2 Currently we have been diffing a successful copy/move and an unsuccessful copy/move and just cant figure out what's going on To sum up: INBOX to SOME_RANDOM_FOLDER has copy/move WORKING INBOX to SUB_FOLDER_OF_INBOX simply says "An Error Occurred: Could not move the message(s). Here's our adjustments on the config.inc.php for the new 1.0.2 version: # cat config.inc.php|egrep '^\$config' $config['db_dsnw'] = 'mysql://xxx:xxx@localhost/xxx'; $config['default_host'] = 'localhost'; $config['default_port'] = 1143; $config['smtp_server'] = 'smtp.xxx.com'; $config['support_url'] = 'http://www.xxx.com/xxx/'; $config['des_key'] = 'xxxxxxxxxxxxxxxx'; $config['product_name'] = 'webmail'; $config['plugins'] = array(); $config['language'] = 'en'; $config['spellcheck_engine'] = 'pspell'; $config['draft_autosave'] = 180; $config['enable_installer'] = false; $config['debug_level'] = 8; $config['log_driver'] = 'file'; $config['log_date_format'] = 'd-M-Y H:i:s O'; $config['syslog_id'] = 'roundcube'; $config['syslog_facility'] = LOG_USER; $config['per_user_logging'] = false; $config['smtp_log'] = true; $config['log_logins'] = false; $config['log_session'] = false; $config['sql_debug'] = false; $config['imap_debug'] = true; $config['imap_ns_personal'] = ''; Note: we tested with an imap email client (thunderbird) and could successfully copy/move within IMAP Please let me know if there's any other information I can share.

1 1

APC cause trouble with roundcube search
by Simon Vargas 22 Aug '14

22 Aug '14

Hello I have Roundcube 0.9.5 installed on Debian 7.6. Due to it was slow I read a tuning guide which recommended installing Alternative PHP Cache for apache. ii apache2 2.2.22-13+deb7u3 amd64 Apache HTTP Server metapackage rc php-apc 3.1.13-1 amd64 APC (Alternative PHP Cache) module for PHP 5 ii php5 5.4.4-14+deb7u12 all server-side, HTML-embedded scripting language (metapackage) I installed and enabled it with pretty much default config and I think it did improve on the performance of the server but users started experiencing problem with the search function of the mails. I'm not 100% sure it was caused by APC. Errors: - Roundcube search sometimes when find messages is not able to open them - Messages which were moved from the Inbox to other folders manually are not appear there - When opening a specific letter (result of a search) it loads in another one in its body After these errors I decided removing APC and manually deleting roundcube's index files. Did anybody experience similar errors?

1 0

Roundcube only attaches certain files
by Robert S 21 Aug '14

21 Aug '14

Hi. I seem to have found the problem (it was in error in /var/log/apache2/error_log - I was looking in /var/log/apache2/ssl_error_log) [Thu Aug 21 20:17:42 2014] [notice] Apache/2.2.27 (Unix) DAV/2 mod_ssl/2.2.27 OpenSSL/1.0.1i SVN/1.8.9 PHP/5.5.15-pl0-gentoo configured -- resuming normal operations *** Error in `/usr/sbin/apache2': free(): invalid pointer: 0x0000000001197788 *** ======= Backtrace: ========= /lib64/libc.so.6(+0x78ff3)[0x7f0552158ff3] /lib64/libc.so.6(+0x7ebb6)[0x7f055215ebb6] /lib64/libc.so.6(+0x7fd92)[0x7f055215fd92] /usr/lib64/libmagic.so.1(+0x53d3)[0x7f054b0c53d3] /usr/lib64/apache2/modules/libphp5.so(finfo_resource_destructor+0x15)[0x7f054a428db5] /usr/lib64/apache2/modules/libphp5.so(list_entry_destructor+0x4e)[0x7f054a6b308e] /usr/lib64/apache2/modules/libphp5.so(zend_hash_del_key_or_index+0x28d)[0x7f054a6b0e5d] /usr/lib64/apache2/modules/libphp5.so(_zend_list_delete+0x61)[0x7f054a6b31a1] /usr/lib64/apache2/modules/libphp5.so(zif_finfo_close+0x59)[0x7f054a428d69] I've filed a bug with Gentoo.

1 0

Roundcube only attaches certain files
by Robert S 21 Aug '14

21 Aug '14

Thank you. I've added the following line to attachments.inc, below your highlighted line: error_log( 'Error: '.$_FILES['_attachments']['error'][$i] ); My error log gives [Thu Aug 21 20:09:01 2014] [error] [client 192.168.0.10] Error: 0, referer: https://mydomain.com.au/mailnew/?_task=mail&_id=34525533553f5c3d98798e&_act… - ie. the error code is 0 whether a file is successfully attached or not. I assume therefore that this is an apache or a php problem. Are you able to give any pointers?

1 0

Roundcube only attaches certain files
by Robert S 18 Aug '14

18 Aug '14

This is a very odd problem. I am able to attach/upload certain files, but not others. I'm not 100% sure about the exact types, but Word documents and .PDF files seem to be OK and I've been unable to upload JPG and RTF files. When I try to upload a file in Firefox, the spinner beside the name of the file in the upload file list spins forever. When I try to upload a file in IE it gives up and gives a "file upload failed" message. Nothing appears in the logs. Could this be something to do with line length in files (eg. RTF), or perhaps binary vs text files??? Its nothing to do with the size of the files - the .RTF file is only 5kb and I can upload a 46KB Word .DOC file. Some info: roundcube 0.9.5 apache 2.2.27-r4 php 5.5.15 main.inc.php: $rcmail_config['debug_level'] = 8; php.ini (additions to default): display_errors = Off log_errors = On error_reporting = E_ALL allow_url_fopen=1 allow_url_include=1 upload_max_filesize = 20M post_max_size = 20M max_execution_time = 60

2 1

good now
by Mark Jones 16 Aug '14

16 Aug '14

i need my working box now

2 1

temp folder
by absolutely_free＠libero.it 16 Aug '14

16 Aug '14

Hi, I just discovered about 16GB of file ("rcmAttmnt....") on /tmp directory on my mailserver. Actually, on my config.inc.php I have: $config['temp_dir'] = 'temp/'; which is /var/www/webmail/temp in my case. On that folder, the oldest file is two days ago. On /tmp, instead, I have several file even from the last year! I think this difference is related to some upgrade that I did in the past (from 0.9.4 to 1.0.0). My question is: is it safe to delete all files in /tmp directory? Are attachment not stored in user mailboxes? Thank you

2 1

Email standards project
by madalin 15 Aug '14

15 Aug '14

Hello, I had a look http://www.email-standards.org/ and i sent myself an email to test it. Roundcube responded greatly, and the email actually DOES look like it's supposed to be. I think roundcube SHOULD be on that list with FULL SUPPORT added to it :) Maybe the coders could drop them an email or something ? -- Regards, madalin http://madalin.eu

4 5

gpg
by James Devine 12 Aug '14

12 Aug '14

I see there's some stuff out there to handle client side gpg keys, there a good way to do server side gpg signing?

2 2

R: Re: R: Re: Issue after upgrade
by absolutely_free＠libero.it 07 Aug '14

07 Aug '14

>----Messaggio originale---- >Da: thomas(a)roundcube.net >Data: 07/08/2014 8.54 >A: "absolutely_free(a)libero.it"<absolutely_free(a)libero.it>, "Roundcube Users mailing list"<users(a)lists.roundcube.net> >Ogg: Re: [RCU] R: Re: Issue after upgrade >> Hi Thomas, thank you very much for your reply. >> So, I added this line: >> >> $config['mime_types'] = '/etc/nginx/mime.types'; >> >> to my config.inc.php file. >> >> This is the file shipped with default nginxi's rpm, so I'll hope it's ok. > >Thanks for the info. Maybe we could add this path to the default >locations which are checked. Hi Thomas, I saw this message: WARNING: Mimetype to file extension mapping doesn't work properly! Please check the 'mime_types' config option and run this script again. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ After fixing "mime_types" I ran again installto.sh script but I got this error: # ./bin/installto.sh /var/www/horde/ ERROR: Installation at target location is up-to-date! Is it all ok?

1 0

R: Re: Issue after upgrade
by absolutely_free＠libero.it 07 Aug '14

07 Aug '14

>----Messaggio originale---- >Da: thomas(a)roundcube.net >Data: 05/08/2014 20.07 >A: "absolutely_free(a)libero.it"<absolutely_free(a)libero.it>, "Roundcube Users mailing list"<users(a)lists.roundcube.net> >Ogg: Re: [RCU] Issue after upgrade ... >This is a webserver issue where Roundcube is unable to find the >mime.types mapping file in one of the standard locations. Thus find or >download the file and add a $config['mime_types'] entry to >/var/www/webmail.domain.it/config/config.inc.php containing the >absolute path to the mime.types file. Hi Thomas, thank you very much for your reply. So, I added this line: $config['mime_types'] = '/etc/nginx/mime.types'; to my config.inc.php file. This is the file shipped with default nginxi's rpm, so I'll hope it's ok. The problem is: when I click on a PDF attachment, I don't see it in the "preview window". I see message "loading data" but it never completes. In your opinion is it a mime related issue? Regards

2 1

Issue after upgrade
by absolutely_free＠libero.it 05 Aug '14

05 Aug '14

Hi, I just upgraded from 1.0.1 to 1.0.2 I used ./bin/installto.sh script from shell. I got this warning: Running update script at target... NOTICE: Obsolete config options: (You still have some obsolete or inexistent properties set. This isn't a problem but should be noticed) - 'mime_magic' Do you want me to fix your local configuration? (y/N) y . backing up the current config file(s)... . writing /var/www/webmail.domain.it/config/config.inc.php... Done. Your configuration files are now up-to-date! WARNING: Mimetype to file extension mapping doesn't work properly! Please check the 'mime_types' config option and run this script again. Executing database schema update. This instance of Roundcube is up-to-date. Have fun! All done. How can I manage this? It's a config.php issue or web server issue? Thank you

2 1

Re: [RCU] Roundcube and Firefox 31
by Martin Wodrich 04 Aug '14

04 Aug '14

Am 04.08.2014 10:43, schrieb Reindl Harald: >> No Answer a week? > > maybe because nobody has that problem? Maybe. > maybe because the javascript console is *global* and after opened > shows any errors and warnings from any window, frame and iframe It show absolute nothing. -- Mit freundlichen Grüßen Martin Wodrich

1 0

Roundcube and Firefox 31
by Martin Wodrich 04 Aug '14

04 Aug '14

I can't write messages with both of our Roundcube Installation (1.0.2 and GIT-master) if I use Firefox 31 as my browser. In both of our installtions the attachment area overlaps the edit-area. -- Mit freundlichen Grüßen Martin Wodrich

2 3

quota and function.js
by Noel Butler 31 Jul '14

31 Jul '14

Hi, Anyone know of a config setting to alter quota limit_high / limit_mid values? I can change them for now in functions.js but hoping to avoid that for case of overwrites in updates. thanks

1 0

Update 1.0.2 released
by Thomas Bruederli 29 Jul '14

29 Jul '14

Dear Roundcube users We're proud to announce the second service release to update the stable version 1.0 of Roundcube webmail. It contains some bug fixes and improvements we considered important for the long term support branch of Roundcube. See the full changelog here: http://trac.roundcube.net/wiki/Changelog It's considered stable and we recommend to update all productive installations of Roundcube with this version. Download it from http://roundcube.net/download. Please do backup before updating! Kind regards, Thomas

4 6

trouble with main mail view on squeeze
by florian 28 Jul '14

28 Jul '14

Hi There! I have two roundcube 1.0.2 installations on seperate good old squeeze servers. I upgraded them occasionally. With one server I had little trouble updating to 1.0.1 cause I have a weired "mbstring.func_overload = 7" for a different web-app and bin/installto.sh complained about it. Anyhow the installation using 1.0.0 worked fine. After the release of roundcube 1.0.2 I found time to work out the mbstring thing and updated roundcube. Unfortunately the "mail-view" was broken afterwards: - at first the mailfolder list pops up for half a second and then disappears - the header bars are there and work fine - the window is very broad and mostly white with a grey roundcube logo in the middle - there are two sliders [grey doubble lines] (one in cernter left which can be moved left and right, one in the upper middle which is not realy "working" after moving it little up) - addressbook and settings work as expected I deleted the installation and installed from scratch, but without any progress :( I tested with four browsers on two systems: all the same one roundcube was working the other didn't. So I started to search for an error by comparing the two installations. I think didn't find any relevant difference in delivered html, php settings or third party software. Almost all the same. Any idea? css? javascript? How can I debug this? Thanks for your help

1 0

Display oddity with imported address book entries.
by Michael D. Sofka 25 Jul '14

25 Jul '14

We are preparing to move from our legacy webmail to RoundCube. Our servers are running 0.9.5, on Ubuntu 14.04. I have found an oddity when importing address book entries: Our old system can export contacts as Outlook 2000 CSV files. When the CSV is imported to "Personal Addresses" the entries show up, but only the Name is displayed. Clicking on "Edit Contact" shows blank entries. Personal Addresses added via the "Address Book" page display all fields correctly. Both kinds of address book entries---imported, and hand entered---are searched when composing messages, and both work, as in the email address is found, and used in the To:, CC:, etc. fields. Stranger still, when I export these entries the VCARD values are correct, and consistent with the VCARD entries for the hand-entered contacts. Finally, and strangest, when I delete the entries, and re-import them from the RoundCube VCARD file the originally imported contacts still do not display correctly, while the deleted, and imported hand-entered contacts do display correctly. I have tried this several times. I also can see no difference in the DB entries for the Contacts, no hidden characters, vertical tabs, nothing out of the ordinary, or different, in the two types of entries. Ideas? -- Michael D. Sofka sofkam(a)rpi.edu C&MT Sr. Systems Programmer, Email, TeX, Epistemology Rensselaer Polytechnic Institute, Troy, NY. http://www.rpi.edu/~sofkam/

2 2

Re: [RCU] users Digest, Vol 85, Issue 8
by Stuart Naylor 12 Jul '14

12 Jul '14

Apols ignore me as managed it in end. $rcmail_config['ldap_public'] = array( 'MyAdLdap' => array ( 'name' => 'Zentyal.lan Contacts', 'hosts' => array ( 0 => 'localhost', ), 'sizelimit' => 6000, 'port' => 3268, 'use_tls' => false, 'user_specific' => false, 'base_dn' => 'DC=office,DC=zentyal,DC=lan', 'bind_dn' => 'CN=Administrator,CN=Users,DC=office,DC=zentyal,DC=lan', 'bind_pass' => 'zent1', 'writable' => false, 'ldap_version' => 3, 'search_fields' => array ( 0 => 'mail', 1 => 'cn', ), 'name_field' => 'cn', 'email_field' => 'mail', 'surname_field' => 'sn', 'firstname_field' => 'givenName', 'sort' => 'sn', 'scope' => 'sub', 'filter' => '(&(mail=*)(|(&(objectClass=user)(!(objectClass=computer)))(objectClass=group)))', 'global_search' => true, 'fuzzy_search' => true ), ); If you want a base DN such as DC=office,DC=zentyal,DC=lan which might bring in OU's and Users the cope needs to be subtree but also only the global catalog works. So it was a combination of scope, base_dn and port and some dumb stuff by myself. Even though writable=false it is still possible to click + and get the form to add a contact. Stuart -----Original message----- > From:users-request@lists.roundcube.net <users-request(a)lists.roundcube.net> > Sent: Saturday 12th July 2014 11:00 > To: users(a)lists.roundcube.net > Subject: users Digest, Vol 85, Issue 8 > > Send users mailing list submissions to > users(a)lists.roundcube.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.roundcube.net/mailman/listinfo/users > or, via email, send a message with subject or body 'help' to > users-request(a)lists.roundcube.net > > You can reach the person managing the list at > users-owner(a)lists.roundcube.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of users digest..." > > > Today's Topics: > > 1. Samba4 AD LDAP Address Book (Stuart Naylor) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 12 Jul 2014 09:46:27 +0100 > From: Stuart Naylor <stuartiannaylor(a)thursbygarden.org> > To: users(a)lists.roundcube.net <users(a)lists.roundcube.net> > Subject: [RCU] Samba4 AD LDAP Address Book > Message-ID: > <zarafa.53c0f5e3.7b25.760fd1c64f52a46a(a)zent1.thursbygarden.lan> > Content-Type: text/plain; charset=utf-8 > > Hi been trying to configure a read only address book from my samba4 install > > I read the http://trac.roundcube.net/wiki/Howto_Config/Ldap > > So its local host or zent1.office.zentyal.lan as its just a vm > > the error log was telling me that there was no php-ldap so I enabled ldap php mod > > Then struggled as still nothing but no error. > > Anybody any tricks or tips for LDAP Address Book > > > > ------------------------------ > > _______________________________________________ > List info: http://lists.roundcube.net/users/ > > > End of users Digest, Vol 85, Issue 8 > ************************************ >

1 0

Samba4 AD LDAP Address Book
by Stuart Naylor 12 Jul '14

12 Jul '14

Hi been trying to configure a read only address book from my samba4 install I read the http://trac.roundcube.net/wiki/Howto_Config/Ldap So its local host or zent1.office.zentyal.lan as its just a vm the error log was telling me that there was no php-ldap so I enabled ldap php mod Then struggled as still nothing but no error. Anybody any tricks or tips for LDAP Address Book

1 0

R: Re: R: Re: Trouble in moving messages in folder
by absolutely_free＠libero.it 11 Jul '14

11 Jul '14

It was a problem with my custom skin. With default skin, moving messages works fine. Thankyou >----Messaggio originale---- >Da: mett(a)pmars.jp >Data: 08/07/2014 4.27 >A: <users(a)lists.roundcube.net> >Cc: "absolutely_free(a)libero.it"<absolutely_free(a)libero.it> >Ogg: Re: [RCU] R: Re: Trouble in moving messages in folder > >On Mon, 7 Jul 2014 14:15:52 +0200 (CEST) >"absolutely_free(a)libero.it" <absolutely_free(a)libero.it> wrote: > >> Hi Mett, >> >> which permission? I'm using "virtual" user (on mysql backend). >> On MTA side, all users folder have postfix:postfix permission. >> Thank you again >> >> >> >> >> ----Messaggio originale---- >> >> Da: mett(a)pmars.jp >> >> Data: 04/07/2014 17.46 >> >> A: "absolutely_free(a)libero.it"<absolutely_free(a)libero.it>, "Roundcube >> Users mailing list"<users(a)lists.roundcube.net> >> >> Ogg: Re: [RCU] Trouble in moving messages in folder >> >> >> >> might be permissions problems. >> >> like, you re running on the server as an allowed user and they are >> not(permission wise, not credential wise). >> >> hth >> >> > >Hi, > >1/You might try to access your roundcube server from the outside(I >mean not the server roundcube is running on and not your local network), >and see if you get the same problem than your users or not. >--> If not, then it is a problem particular to your user's set up and >not the server. > >2/You said you're using virtual user with mysql. So, it seems it is not >a roundcube issue but more an MTA/MDA one. > >A good tutorial can be found at the following link: >https://workaround.org/ispmail/squeeze/setting-up-dovecot > >hth > > >

1 0

Strange behavior while sending mails
by Felix Rubio Dalmau 11 Jul '14

11 Jul '14

Hi everybody, I have configured roundcube to access my mail server through the submission port. I have enabled also the smtp debugging and I get the proper log if I send a mail using roundcube. In the log, I get these last messages telling everything is ok: [10-Jul-2014 22:32:26 +0200]: <k2d6nftq> Recv: 250 2.0.0 Ok: queued as 3C1A7E02DB [10-Jul-2014 22:32:26 +0200]: <k2d6nftq> Send: QUIT [10-Jul-2014 22:32:26 +0200]: <k2d6nftq> Recv: 221 2.0.0 Bye However, in the web interface, since I press the button "send" that appears a toast message saying "Sending mail..." and never stops until it is replaced by another which reads "Timed out". So it is like there is some problem by properly processing the output from my smtp server in the roundcube side. Does anybody know how to solve this issue? Thank you very much in advance, Felix

2 1

R: Re: Trouble in moving messages in folder
by absolutely_free＠libero.it 08 Jul '14

08 Jul '14

Hi Mett, which permission? I'm using "virtual" user (on mysql backend). On MTA side, all users folder have postfix:postfix permission. Thank you again ----Messaggio originale---- Da: mett(a)pmars.jp Data: 04/07/2014 17.46 A: "absolutely_free(a)libero.it"<absolutely_free(a)libero.it>, "Roundcube Users mailing list"<users(a)lists.roundcube.net> Ogg: Re: [RCU] Trouble in moving messages in folder might be permissions problems. like, you re running on the server as an allowed user and they are not(permission wise, not credential wise). hth

2 1

Plugin - Viewer
by Marcus Malcom 07 Jul '14

07 Jul '14

Hi all, I'm writing a plugin that uses the message_part_get hook. The basics of what I'm doing is based on certain mimetypes, I want to have a special viewer for certain attachments. Based on the attachment, I write some info to the Roundcube temp directory. When I try to display that in a viewer tab via this method: if (!$args['download'] && $args['mimetype'] && empty($_GET['_load']) && in_array($args['mimetype'], $this->xdm_mimetypes)) { header('Location: ' . $this->abs_url($pathtomytemphtml)); $args['abort'] = true; } I'm getting Forbidden - You don't have permission to access /mail/temp/somedir/index.html on this server. Note: if I do this same thing and put the location to a dummy index.html that is under my plugin directory: .../plugins/myplugin/index.html Roundcube displays the content inlined. For privacy, I can't put the files in the "myplugin" directory. How can I get this inlined correctly using this method? Any help is appreciated. Thank you, -- Marcus Malcom Mirth Corporation Senior Software Engineer -- CONFIDENTIALITY NOTICE: The information contained in this electronic transmission may be confidential. If you are not an intended recipient, be aware that any disclosure, copying, distribution or use of the information contained in this transmission is prohibited and may be unlawful. If you have received this transmission in error, please notify us by email reply and then erase it from your computer system.

2 1

Trouble in moving messages in folder
by absolutely_free＠libero.it 04 Jul '14

04 Jul '14

Hi, some users complain about problems in moving messages in subfolders. They get "forbidden error", even with different browsers. Oddly, if I access with their credentials, I have no problem in moving message. How can I further investigate this? RC version is 1.0.1 Thank you

2 1

Re: [RCU] users Digest, Vol 85, Issue 1
by Ricardo Adolfo Sánchez Arboleda 01 Jul '14

01 Jul '14

These are the files defaults.inc.php / / IMAP [...] $ config ['default_host'] = 'example.com'; / / TCP port connections used for IMAP $ config ['default_port'] = 143; / / SMTP [...] $ config ['smtp_server'] =''; / / SMTP port (default is 25; $ config ['smtp_port'] = 25; config.inc.php / / IMAP $ config ['default_host'] =''; / / SMTP [...] $ config ['smtp_server'] =''; / / SMTP port (default is 25; $ config ['smtp_port'] = 25; Now where editing username: password. to enter roundcube. Thank you! *Saludes;* rasa. 2014-07-01 5:00 GMT-05:00 <users-request(a)lists.roundcube.net>: > Send users mailing list submissions to > users(a)lists.roundcube.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.roundcube.net/mailman/listinfo/users > or, via email, send a message with subject or body 'help' to > users-request(a)lists.roundcube.net > > You can reach the person managing the list at > users-owner(a)lists.roundcube.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of users digest..." > > > Today's Topics: > > 1. with my domain name (Ricardo Adolfo S?nchez Arboleda) > 2. Re: with my domain name (Mike Burger) > 3. Re: with my domain name (Arne Berglund) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 30 Jun 2014 13:41:55 -0500 > From: Ricardo Adolfo S?nchez Arboleda <rasa996412(a)gmail.com> > To: users(a)lists.roundcube.net > Subject: [RCU] with my domain name > Message-ID: > <CAE=ryQ_UTfhFh3B4rA8DWEyBZwPecvoKVaZCV1ToNxR9NZmcyA(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > List where and how to edit roundcubemail-1.0.1 to send and receive > with my domain name. > Example: examplo(a)example.com > IMAP: > SMTP: > I can only do this with gmail > Thank you! > > > *Saludes;* > > rasa. > > > ------------------------------ > > Message: 2 > Date: Mon, 30 Jun 2014 14:47:06 -0400 > From: Mike Burger <mburger(a)bubbanfriends.org> > To: Roundcube Users mailing list <users(a)lists.roundcube.net> > Subject: Re: [RCU] with my domain name > Message-ID: <399747001556a9f548af462c0736f23b(a)bubbanfriends.org> > Content-Type: text/plain; charset=UTF-8; format=flowed > > On 2014-06-30 2:41 pm, Ricardo Adolfo S?nchez Arboleda wrote: >> List where and how to edit roundcubemail-1.0.1 to send and receive >> with my domain name. >> Example: examplo(a)example.com >> IMAP: >> SMTP: >> I can only do this with gmail >> Thank you! > > <roundcube install dir>/config/defaults.inc.php > > $config['default_host']=example.com > -- > Mike Burger > http://www.bubbanfriends.org > > "It's always suicide-mission this, save-the-planet that. No one ever > just stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1 > > > > ------------------------------ > > Message: 3 > Date: Mon, 30 Jun 2014 11:53:18 -0700 > From: Arne Berglund <aberglund(a)lesd.k12.or.us> > To: Roundcube Users mailing list <users(a)lists.roundcube.net> > Subject: Re: [RCU] with my domain name > Message-ID: <14df4a59d42c5312e84213852db1ba6c(a)mail.lesd.k12.or.us> > Content-Type: text/plain; charset=UTF-8; format=flowed > > On 2014-06-30 11:47, Mike Burger wrote: >> On 2014-06-30 2:41 pm, Ricardo Adolfo S?nchez Arboleda wrote: >>> List where and how to edit roundcubemail-1.0.1 to send and receive >>> with my domain name. >>> Example: examplo(a)example.com >>> IMAP: >>> SMTP: >>> I can only do this with gmail >>> Thank you! >> >> <roundcube install dir>/config/defaults.inc.php >> >> $config['default_host']=example.com > > It is best to not edit the defaults file. Instead, copy the line that > you need a different value into the config/config.inc.php file and make > the change there. Leave defaults file unchanged. An entry that exists in > config.inc.php will override the default entry. > > In the end, the config.inc.php file should be fairly short, with only > the entries that are changed from default. Makes troubleshooting much > simpler. > > -- > Arne Berglund > System Administrator, Internet Services > Lane Education Service District > Eugene, OR > ____________ > > > > > ------------------------------ > > _______________________________________________ > List info: http://lists.roundcube.net/users/ > > > End of users Digest, Vol 85, Issue 1 > ************************************

1 0

with my domain name
by Ricardo Adolfo Sánchez Arboleda 01 Jul '14

01 Jul '14

List where and how to edit roundcubemail-1.0.1 to send and receive with my domain name. Example: examplo(a)example.com IMAP: SMTP: I can only do this with gmail Thank you! *Saludes;* rasa.

4 3

R: Re: Issue with PDF attachment
by absolutely_free＠libero.it 23 Jun '14

23 Jun '14

Hi, PDF size is 150 KB. The problem occours with Mozilla Firefox 30 and IE 11; with Google Chrome I have no issue. Thank you >----Messaggio originale---- >Da: roundcube-users(a)whyaskwhy.org >Data: 21/06/2014 19.40 >A: "Roundcube Users mailing list"<users(a)lists.roundcube.net> >Ogg: Re: [RCU] Issue with PDF attachment > >On 2014-06-16 11:10, absolutely_free(a)libero.it wrote: > >> We I click on PDF file, I see a new window with "Loading data..." >> message and PDF never appears. > >* How large is the PDF? >* Have you tried an alternate browser? >** For example Google Chrome and Mozilla Firefox both have built-in PDF >support, but Adobe Reader/Acrobat may be overriding that support. >* What about an alternate system? >** Such as a virtual machine > >I have Roundcube v1.0.1 and I was able to open a PDF file without >trouble, aside from the "Click to play" option for Google Chrome. >_______________________________________________ >Roundcube Users mailing list >users(a)lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users >

1 0

Issue with PDF attachment
by absolutely_free＠libero.it 21 Jun '14

21 Jun '14

Hi, I am using CentOS + nginx + php-fpm. I am not able to open PDF file through RC 1.0.1 We I click on PDF file, I see a new window with "Loading data..." message and PDF never appears. Can you help me with this problem? Thank you

3 2

Recipient selection with mouse currently not working in git-master
by Michael Heydekamp 16 Jun '14

16 Jun '14

Not sure if this is a temporary problem and if it would be "fixed" if I reboot the machine, but currently I have the following 100% replicable problem: Typing a part of the recipient's name/address in any address field, I'm seeing a number of possible selections. But I can't select any of them with the mouse. Oddly, I can mark parts of the offered selections with the mouse instead, see attached. Selecting a recipient with the keyboard does still work, but only if I didn't click on any of the offered selections before. If I did that, even the keyboard selection doesn't work anymore. Win7/64, FF 27.0.1, RC 1.1-git [GIT 20140605.2017]. Cheers, -- Michael Heydekamp Co-Admin freexp.de Düsseldorf/Germany

3 5

spell checker hangs
by Alexander Pyhalov 16 Jun '14

16 Jun '14

Hello. On our roundcube installation I see the following error. When I send message, roundcube hangs with status "Sending message" for several minutes. Then I receive "Request time out". However, the message is sent. It's related to spell checker. I see that after sending message our roundcube host opens connection to spell.roundcube.net (443 port) and they are talking for a second: 12:01:24.804884 IP webmail-test.58972 > plugins.roundcube.net.https: Flags [S], seq 3244734379, win 14600, options [mss 1460,sackOK,TS val 3808005355 ecr 0,nop,wscale 7], length 0 12:01:24.868230 IP plugins.roundcube.net.https > webmail-test.58972: Flags [S.], seq 3698264996, ack 3244734380, win 14480, options [mss 1460,sackOK,TS val 1331948192 ecr 3808005355,nop,wscale 6], length 0 12:01:24.868264 IP webmail-test.58972 > plugins.roundcube.net.https: Flags [.], ack 1, win 115, options [nop,nop,TS val 3808005418 ecr 1331948192], length 0 12:01:24.869062 IP webmail-test.58972 > plugins.roundcube.net.https: Flags [P.], seq 1:349, ack 1, win 115, options [nop,nop,TS val 3808005419 ecr 1331948192], length 348 12:01:24.932086 IP plugins.roundcube.net.https > webmail-test.58972: Flags [.], ack 349, win 243, options [nop,nop,TS val 1331948208 ecr 3808005419], length 0 12:01:24.935464 IP plugins.roundcube.net.https > webmail-test.58972: Flags [.], seq 1:1449, ack 349, win 243, options [nop,nop,TS val 1331948209 ecr 3808005419], length 1448 12:01:24.935492 IP webmail-test.58972 > plugins.roundcube.net.https: Flags [.], ack 1449, win 137, options [nop,nop,TS val 3808005485 ecr 1331948209], length 0 12:01:24.935464 IP plugins.roundcube.net.https > webmail-test.58972: Flags [.], seq 1449:2897, ack 349, win 243, options [nop,nop,TS val 1331948209 ecr 3808005419], length 1448 12:01:24.935508 IP webmail-test.58972 > plugins.roundcube.net.https: Flags [.], ack 2897, win 160, options [nop,nop,TS val 3808005485 ecr 1331948209], length 0 12:01:24.935473 IP plugins.roundcube.net.https > webmail-test.58972: Flags [.], ack 349, win 243, options [nop,nop,TS val 1331948209 ecr 3808005419], length 0 12:01:24.935478 IP plugins.roundcube.net.https > webmail-test.58972: Flags [P.], seq 2897:2975, ack 349, win 243, options [nop,nop,TS val 1331948209 ecr 3808005419], length 78 12:01:24.935519 IP webmail-test.58972 > plugins.roundcube.net.https: Flags [.], ack 2975, win 160, options [nop,nop,TS val 3808005485 ecr 1331948209], length 0 12:01:24.937478 IP webmail-test.58972 > plugins.roundcube.net.https: Flags [P.], seq 349:483, ack 2975, win 160, options [nop,nop,TS val 3808005487 ecr 1331948209], length 134 12:01:25.001537 IP plugins.roundcube.net.https > webmail-test.58972: Flags [P.], seq 2975:3225, ack 483, win 260, options [nop,nop,TS val 1331948226 ecr 3808005487], length 250 12:01:25.002056 IP webmail-test.58972 > plugins.roundcube.net.https: Flags [P.], seq 483:909, ack 3225, win 182, options [nop,nop,TS val 3808005552 ecr 1331948226], length 426 12:01:25.101188 IP plugins.roundcube.net.https > webmail-test.58972: Flags [.], ack 909, win 277, options [nop,nop,TS val 1331948251 ecr 3808005552], length 0 then connection hangs in ESTABLISHED state for several minutes. How can I debug the issue? I see this behavior on both production and test server. Production server was running Roundcube Webmail 1.0-rc for a year now. It seems that errors started to occur this Monday... -- Best regards, Alexander Pyhalov, system administrator of Computer Center of Southern Federal University

4 4

Roudcube instlling nginx+php-fpm
by Alexandr Khomenko 10 Jun '14

10 Jun '14

Hi, I'm having a tough time getting roundcube to work. Here's the software I'm using, and the versions: FreeBSD 9.2-RELEASE nginx/1.6.0 PHP 5.4.28 (php-fpm via fastcgi) (all my extensions are listed below) When I browse to /installer/, I get a blank page. Absolutely nothing in my nginx error log, php-fpm log, or php error log. I went through the roundcube requirements list: http://trac.roundcube.net/wiki/Howto_Requirements extension=bz2.so extension=gd.so extension=iconv.so extension=mysql.so extension=session.so extension=xml.so extension=dom.so extension=xmlreader.so extension=xmlwriter.so extension=zlib.so extension=mbstring.so extension=json.so extension=intl.so extension=zip.so extension=filter.so extension=pdo.so extension=pdo_mysql.so Any ideas? Thank you! Best regards, Alexandr Khomenko

2 2

Question about RC upgrade
by absolutely_free＠libero.it 08 Jun '14

08 Jun '14

Hi, I'm going to upgrade from RC 1.0.0 to RC 1.0.1 I will use the ./bin/installto.sh script I don't know if I need to use /bin/indexcontacts.sh script, too. I'm using MySQL backend. Thankyou

2 1

Change Roundcube configuration setting on a per-user basis
by UDE Security 06 Jun '14

06 Jun '14

Hello, I want to migrate our actual webmailer based on Squirrelmail to Roundcube version 0.9.5 (OS Red Hat Enterprise Linux Server release 6.5). Using Squirrelmail together with the VLogin-plugin I can connect a certain user using his account for login (and not an email address) to his defined mailbox which is hosted on a cyrus-imap-linux server or a MS exchange system. At the same time I can activate or switch off the availability of specific plugins (for example a sieve filter plugin). I've already installed a roundcube test system, everything works fine now. But I cannot manage that per-user customising with the roundcube vlogin plugin. Within the plugin package there is a file called "TODO" telling me that these features unfortunately aren't realized at the moment. My question to you: is there a way to implement this behaviour? Are there more possibilities if i upgrade to version 1.0.1? Thank you very much in advance.

1 0

messages list refreshing unexpectedly
by Dan Langille 06 Jun '14

06 Jun '14

I recently upgraded from Roundcube 0.9.x and I'm now using Roundcube 1.0.1 on FreeBSD with PHP 5.5 With the new release, I find that the messages list refreshes after replying or forwarding. This change loses the context you previously had. Any ideas as to why this happens? thanks -- Dan Langille - http://langille.org/

2 2

Order of folders cluttered
by Michael Heydekamp 04 Jun '14

04 Jun '14

I don't know how that happened, but all of a sudden the order my mail folders is totally f*cked up (e.g. the Trash folder being the very last of all folders rather than one of the special folders at the top of the folder list). Because of this incident I realized that I don't know if and how to change the order of folders at all (apart from manually fiddling around with settings in the database). Is there a way...? Cheers -- Michael Heydekamp Co-Admin freexp.de Düsseldorf/Germany

2 14

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users