- Users - Roundcube mailing lists

trouble with main mail view on squeeze
by florian 28 Jul '14

28 Jul '14

Hi There! I have two roundcube 1.0.2 installations on seperate good old squeeze servers. I upgraded them occasionally. With one server I had little trouble updating to 1.0.1 cause I have a weired "mbstring.func_overload = 7" for a different web-app and bin/installto.sh complained about it. Anyhow the installation using 1.0.0 worked fine. After the release of roundcube 1.0.2 I found time to work out the mbstring thing and updated roundcube. Unfortunately the "mail-view" was broken afterwards: - at first the mailfolder list pops up for half a second and then disappears - the header bars are there and work fine - the window is very broad and mostly white with a grey roundcube logo in the middle - there are two sliders [grey doubble lines] (one in cernter left which can be moved left and right, one in the upper middle which is not realy "working" after moving it little up) - addressbook and settings work as expected I deleted the installation and installed from scratch, but without any progress :( I tested with four browsers on two systems: all the same one roundcube was working the other didn't. So I started to search for an error by comparing the two installations. I think didn't find any relevant difference in delivered html, php settings or third party software. Almost all the same. Any idea? css? javascript? How can I debug this? Thanks for your help

1 0

Display oddity with imported address book entries.
by Michael D. Sofka 25 Jul '14

25 Jul '14

We are preparing to move from our legacy webmail to RoundCube. Our servers are running 0.9.5, on Ubuntu 14.04. I have found an oddity when importing address book entries: Our old system can export contacts as Outlook 2000 CSV files. When the CSV is imported to "Personal Addresses" the entries show up, but only the Name is displayed. Clicking on "Edit Contact" shows blank entries. Personal Addresses added via the "Address Book" page display all fields correctly. Both kinds of address book entries---imported, and hand entered---are searched when composing messages, and both work, as in the email address is found, and used in the To:, CC:, etc. fields. Stranger still, when I export these entries the VCARD values are correct, and consistent with the VCARD entries for the hand-entered contacts. Finally, and strangest, when I delete the entries, and re-import them from the RoundCube VCARD file the originally imported contacts still do not display correctly, while the deleted, and imported hand-entered contacts do display correctly. I have tried this several times. I also can see no difference in the DB entries for the Contacts, no hidden characters, vertical tabs, nothing out of the ordinary, or different, in the two types of entries. Ideas? -- Michael D. Sofka sofkam(a)rpi.edu C&MT Sr. Systems Programmer, Email, TeX, Epistemology Rensselaer Polytechnic Institute, Troy, NY. http://www.rpi.edu/~sofkam/

2 2

Re: [RCU] users Digest, Vol 85, Issue 8
by Stuart Naylor 12 Jul '14

12 Jul '14

Apols ignore me as managed it in end. $rcmail_config['ldap_public'] = array( 'MyAdLdap' => array ( 'name' => 'Zentyal.lan Contacts', 'hosts' => array ( 0 => 'localhost', ), 'sizelimit' => 6000, 'port' => 3268, 'use_tls' => false, 'user_specific' => false, 'base_dn' => 'DC=office,DC=zentyal,DC=lan', 'bind_dn' => 'CN=Administrator,CN=Users,DC=office,DC=zentyal,DC=lan', 'bind_pass' => 'zent1', 'writable' => false, 'ldap_version' => 3, 'search_fields' => array ( 0 => 'mail', 1 => 'cn', ), 'name_field' => 'cn', 'email_field' => 'mail', 'surname_field' => 'sn', 'firstname_field' => 'givenName', 'sort' => 'sn', 'scope' => 'sub', 'filter' => '(&(mail=*)(|(&(objectClass=user)(!(objectClass=computer)))(objectClass=group)))', 'global_search' => true, 'fuzzy_search' => true ), ); If you want a base DN such as DC=office,DC=zentyal,DC=lan which might bring in OU's and Users the cope needs to be subtree but also only the global catalog works. So it was a combination of scope, base_dn and port and some dumb stuff by myself. Even though writable=false it is still possible to click + and get the form to add a contact. Stuart -----Original message----- > From:users-request@lists.roundcube.net <users-request(a)lists.roundcube.net> > Sent: Saturday 12th July 2014 11:00 > To: users(a)lists.roundcube.net > Subject: users Digest, Vol 85, Issue 8 > > Send users mailing list submissions to > users(a)lists.roundcube.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.roundcube.net/mailman/listinfo/users > or, via email, send a message with subject or body 'help' to > users-request(a)lists.roundcube.net > > You can reach the person managing the list at > users-owner(a)lists.roundcube.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of users digest..." > > > Today's Topics: > > 1. Samba4 AD LDAP Address Book (Stuart Naylor) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 12 Jul 2014 09:46:27 +0100 > From: Stuart Naylor <stuartiannaylor(a)thursbygarden.org> > To: users(a)lists.roundcube.net <users(a)lists.roundcube.net> > Subject: [RCU] Samba4 AD LDAP Address Book > Message-ID: > <zarafa.53c0f5e3.7b25.760fd1c64f52a46a(a)zent1.thursbygarden.lan> > Content-Type: text/plain; charset=utf-8 > > Hi been trying to configure a read only address book from my samba4 install > > I read the http://trac.roundcube.net/wiki/Howto_Config/Ldap > > So its local host or zent1.office.zentyal.lan as its just a vm > > the error log was telling me that there was no php-ldap so I enabled ldap php mod > > Then struggled as still nothing but no error. > > Anybody any tricks or tips for LDAP Address Book > > > > ------------------------------ > > _______________________________________________ > List info: http://lists.roundcube.net/users/ > > > End of users Digest, Vol 85, Issue 8 > ************************************ >

1 0

Samba4 AD LDAP Address Book
by Stuart Naylor 12 Jul '14

12 Jul '14

Hi been trying to configure a read only address book from my samba4 install I read the http://trac.roundcube.net/wiki/Howto_Config/Ldap So its local host or zent1.office.zentyal.lan as its just a vm the error log was telling me that there was no php-ldap so I enabled ldap php mod Then struggled as still nothing but no error. Anybody any tricks or tips for LDAP Address Book

1 0

R: Re: R: Re: Trouble in moving messages in folder
by absolutely_free＠libero.it 11 Jul '14

11 Jul '14

It was a problem with my custom skin. With default skin, moving messages works fine. Thankyou >----Messaggio originale---- >Da: mett(a)pmars.jp >Data: 08/07/2014 4.27 >A: <users(a)lists.roundcube.net> >Cc: "absolutely_free(a)libero.it"<absolutely_free(a)libero.it> >Ogg: Re: [RCU] R: Re: Trouble in moving messages in folder > >On Mon, 7 Jul 2014 14:15:52 +0200 (CEST) >"absolutely_free(a)libero.it" <absolutely_free(a)libero.it> wrote: > >> Hi Mett, >> >> which permission? I'm using "virtual" user (on mysql backend). >> On MTA side, all users folder have postfix:postfix permission. >> Thank you again >> >> >> >> >> ----Messaggio originale---- >> >> Da: mett(a)pmars.jp >> >> Data: 04/07/2014 17.46 >> >> A: "absolutely_free(a)libero.it"<absolutely_free(a)libero.it>, "Roundcube >> Users mailing list"<users(a)lists.roundcube.net> >> >> Ogg: Re: [RCU] Trouble in moving messages in folder >> >> >> >> might be permissions problems. >> >> like, you re running on the server as an allowed user and they are >> not(permission wise, not credential wise). >> >> hth >> >> > >Hi, > >1/You might try to access your roundcube server from the outside(I >mean not the server roundcube is running on and not your local network), >and see if you get the same problem than your users or not. >--> If not, then it is a problem particular to your user's set up and >not the server. > >2/You said you're using virtual user with mysql. So, it seems it is not >a roundcube issue but more an MTA/MDA one. > >A good tutorial can be found at the following link: >https://workaround.org/ispmail/squeeze/setting-up-dovecot > >hth > > >

1 0

Strange behavior while sending mails
by Felix Rubio Dalmau 11 Jul '14

11 Jul '14

Hi everybody, I have configured roundcube to access my mail server through the submission port. I have enabled also the smtp debugging and I get the proper log if I send a mail using roundcube. In the log, I get these last messages telling everything is ok: [10-Jul-2014 22:32:26 +0200]: <k2d6nftq> Recv: 250 2.0.0 Ok: queued as 3C1A7E02DB [10-Jul-2014 22:32:26 +0200]: <k2d6nftq> Send: QUIT [10-Jul-2014 22:32:26 +0200]: <k2d6nftq> Recv: 221 2.0.0 Bye However, in the web interface, since I press the button "send" that appears a toast message saying "Sending mail..." and never stops until it is replaced by another which reads "Timed out". So it is like there is some problem by properly processing the output from my smtp server in the roundcube side. Does anybody know how to solve this issue? Thank you very much in advance, Felix

2 1

R: Re: Trouble in moving messages in folder
by absolutely_free＠libero.it 08 Jul '14

08 Jul '14

Hi Mett, which permission? I'm using "virtual" user (on mysql backend). On MTA side, all users folder have postfix:postfix permission. Thank you again ----Messaggio originale---- Da: mett(a)pmars.jp Data: 04/07/2014 17.46 A: "absolutely_free(a)libero.it"<absolutely_free(a)libero.it>, "Roundcube Users mailing list"<users(a)lists.roundcube.net> Ogg: Re: [RCU] Trouble in moving messages in folder might be permissions problems. like, you re running on the server as an allowed user and they are not(permission wise, not credential wise). hth

2 1

Plugin - Viewer
by Marcus Malcom 07 Jul '14

07 Jul '14

Hi all, I'm writing a plugin that uses the message_part_get hook. The basics of what I'm doing is based on certain mimetypes, I want to have a special viewer for certain attachments. Based on the attachment, I write some info to the Roundcube temp directory. When I try to display that in a viewer tab via this method: if (!$args['download'] && $args['mimetype'] && empty($_GET['_load']) && in_array($args['mimetype'], $this->xdm_mimetypes)) { header('Location: ' . $this->abs_url($pathtomytemphtml)); $args['abort'] = true; } I'm getting Forbidden - You don't have permission to access /mail/temp/somedir/index.html on this server. Note: if I do this same thing and put the location to a dummy index.html that is under my plugin directory: .../plugins/myplugin/index.html Roundcube displays the content inlined. For privacy, I can't put the files in the "myplugin" directory. How can I get this inlined correctly using this method? Any help is appreciated. Thank you, -- Marcus Malcom Mirth Corporation Senior Software Engineer -- CONFIDENTIALITY NOTICE: The information contained in this electronic transmission may be confidential. If you are not an intended recipient, be aware that any disclosure, copying, distribution or use of the information contained in this transmission is prohibited and may be unlawful. If you have received this transmission in error, please notify us by email reply and then erase it from your computer system.

2 1

Trouble in moving messages in folder
by absolutely_free＠libero.it 04 Jul '14

04 Jul '14

Hi, some users complain about problems in moving messages in subfolders. They get "forbidden error", even with different browsers. Oddly, if I access with their credentials, I have no problem in moving message. How can I further investigate this? RC version is 1.0.1 Thank you

2 1

Re: [RCU] users Digest, Vol 85, Issue 1
by Ricardo Adolfo Sánchez Arboleda 02 Jul '14

02 Jul '14

These are the files defaults.inc.php / / IMAP [...] $ config ['default_host'] = 'example.com'; / / TCP port connections used for IMAP $ config ['default_port'] = 143; / / SMTP [...] $ config ['smtp_server'] =''; / / SMTP port (default is 25; $ config ['smtp_port'] = 25; config.inc.php / / IMAP $ config ['default_host'] =''; / / SMTP [...] $ config ['smtp_server'] =''; / / SMTP port (default is 25; $ config ['smtp_port'] = 25; Now where editing username: password. to enter roundcube. Thank you! *Saludes;* rasa. 2014-07-01 5:00 GMT-05:00 <users-request(a)lists.roundcube.net>: > Send users mailing list submissions to > users(a)lists.roundcube.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.roundcube.net/mailman/listinfo/users > or, via email, send a message with subject or body 'help' to > users-request(a)lists.roundcube.net > > You can reach the person managing the list at > users-owner(a)lists.roundcube.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of users digest..." > > > Today's Topics: > > 1. with my domain name (Ricardo Adolfo S?nchez Arboleda) > 2. Re: with my domain name (Mike Burger) > 3. Re: with my domain name (Arne Berglund) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 30 Jun 2014 13:41:55 -0500 > From: Ricardo Adolfo S?nchez Arboleda <rasa996412(a)gmail.com> > To: users(a)lists.roundcube.net > Subject: [RCU] with my domain name > Message-ID: > <CAE=ryQ_UTfhFh3B4rA8DWEyBZwPecvoKVaZCV1ToNxR9NZmcyA(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > List where and how to edit roundcubemail-1.0.1 to send and receive > with my domain name. > Example: examplo(a)example.com > IMAP: > SMTP: > I can only do this with gmail > Thank you! > > > *Saludes;* > > rasa. > > > ------------------------------ > > Message: 2 > Date: Mon, 30 Jun 2014 14:47:06 -0400 > From: Mike Burger <mburger(a)bubbanfriends.org> > To: Roundcube Users mailing list <users(a)lists.roundcube.net> > Subject: Re: [RCU] with my domain name > Message-ID: <399747001556a9f548af462c0736f23b(a)bubbanfriends.org> > Content-Type: text/plain; charset=UTF-8; format=flowed > > On 2014-06-30 2:41 pm, Ricardo Adolfo S?nchez Arboleda wrote: >> List where and how to edit roundcubemail-1.0.1 to send and receive >> with my domain name. >> Example: examplo(a)example.com >> IMAP: >> SMTP: >> I can only do this with gmail >> Thank you! > > <roundcube install dir>/config/defaults.inc.php > > $config['default_host']=example.com > -- > Mike Burger > http://www.bubbanfriends.org > > "It's always suicide-mission this, save-the-planet that. No one ever > just stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1 > > > > ------------------------------ > > Message: 3 > Date: Mon, 30 Jun 2014 11:53:18 -0700 > From: Arne Berglund <aberglund(a)lesd.k12.or.us> > To: Roundcube Users mailing list <users(a)lists.roundcube.net> > Subject: Re: [RCU] with my domain name > Message-ID: <14df4a59d42c5312e84213852db1ba6c(a)mail.lesd.k12.or.us> > Content-Type: text/plain; charset=UTF-8; format=flowed > > On 2014-06-30 11:47, Mike Burger wrote: >> On 2014-06-30 2:41 pm, Ricardo Adolfo S?nchez Arboleda wrote: >>> List where and how to edit roundcubemail-1.0.1 to send and receive >>> with my domain name. >>> Example: examplo(a)example.com >>> IMAP: >>> SMTP: >>> I can only do this with gmail >>> Thank you! >> >> <roundcube install dir>/config/defaults.inc.php >> >> $config['default_host']=example.com > > It is best to not edit the defaults file. Instead, copy the line that > you need a different value into the config/config.inc.php file and make > the change there. Leave defaults file unchanged. An entry that exists in > config.inc.php will override the default entry. > > In the end, the config.inc.php file should be fairly short, with only > the entries that are changed from default. Makes troubleshooting much > simpler. > > -- > Arne Berglund > System Administrator, Internet Services > Lane Education Service District > Eugene, OR > ____________ > > > > > ------------------------------ > > _______________________________________________ > List info: http://lists.roundcube.net/users/ > > > End of users Digest, Vol 85, Issue 1 > ************************************

1 0

with my domain name
by Ricardo Adolfo Sánchez Arboleda 01 Jul '14

01 Jul '14

List where and how to edit roundcubemail-1.0.1 to send and receive with my domain name. Example: examplo(a)example.com IMAP: SMTP: I can only do this with gmail Thank you! *Saludes;* rasa.

4 3

R: Re: Issue with PDF attachment
by absolutely_free＠libero.it 23 Jun '14

23 Jun '14

Hi, PDF size is 150 KB. The problem occours with Mozilla Firefox 30 and IE 11; with Google Chrome I have no issue. Thank you >----Messaggio originale---- >Da: roundcube-users(a)whyaskwhy.org >Data: 21/06/2014 19.40 >A: "Roundcube Users mailing list"<users(a)lists.roundcube.net> >Ogg: Re: [RCU] Issue with PDF attachment > >On 2014-06-16 11:10, absolutely_free(a)libero.it wrote: > >> We I click on PDF file, I see a new window with "Loading data..." >> message and PDF never appears. > >* How large is the PDF? >* Have you tried an alternate browser? >** For example Google Chrome and Mozilla Firefox both have built-in PDF >support, but Adobe Reader/Acrobat may be overriding that support. >* What about an alternate system? >** Such as a virtual machine > >I have Roundcube v1.0.1 and I was able to open a PDF file without >trouble, aside from the "Click to play" option for Google Chrome. >_______________________________________________ >Roundcube Users mailing list >users(a)lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users >

1 0

Issue with PDF attachment
by absolutely_free＠libero.it 21 Jun '14

21 Jun '14

Hi, I am using CentOS + nginx + php-fpm. I am not able to open PDF file through RC 1.0.1 We I click on PDF file, I see a new window with "Loading data..." message and PDF never appears. Can you help me with this problem? Thank you

3 2

Recipient selection with mouse currently not working in git-master
by Michael Heydekamp 16 Jun '14

16 Jun '14

Not sure if this is a temporary problem and if it would be "fixed" if I reboot the machine, but currently I have the following 100% replicable problem: Typing a part of the recipient's name/address in any address field, I'm seeing a number of possible selections. But I can't select any of them with the mouse. Oddly, I can mark parts of the offered selections with the mouse instead, see attached. Selecting a recipient with the keyboard does still work, but only if I didn't click on any of the offered selections before. If I did that, even the keyboard selection doesn't work anymore. Win7/64, FF 27.0.1, RC 1.1-git [GIT 20140605.2017]. Cheers, -- Michael Heydekamp Co-Admin freexp.de Düsseldorf/Germany

3 5

spell checker hangs
by Alexander Pyhalov 16 Jun '14

16 Jun '14

Hello. On our roundcube installation I see the following error. When I send message, roundcube hangs with status "Sending message" for several minutes. Then I receive "Request time out". However, the message is sent. It's related to spell checker. I see that after sending message our roundcube host opens connection to spell.roundcube.net (443 port) and they are talking for a second: 12:01:24.804884 IP webmail-test.58972 > plugins.roundcube.net.https: Flags [S], seq 3244734379, win 14600, options [mss 1460,sackOK,TS val 3808005355 ecr 0,nop,wscale 7], length 0 12:01:24.868230 IP plugins.roundcube.net.https > webmail-test.58972: Flags [S.], seq 3698264996, ack 3244734380, win 14480, options [mss 1460,sackOK,TS val 1331948192 ecr 3808005355,nop,wscale 6], length 0 12:01:24.868264 IP webmail-test.58972 > plugins.roundcube.net.https: Flags [.], ack 1, win 115, options [nop,nop,TS val 3808005418 ecr 1331948192], length 0 12:01:24.869062 IP webmail-test.58972 > plugins.roundcube.net.https: Flags [P.], seq 1:349, ack 1, win 115, options [nop,nop,TS val 3808005419 ecr 1331948192], length 348 12:01:24.932086 IP plugins.roundcube.net.https > webmail-test.58972: Flags [.], ack 349, win 243, options [nop,nop,TS val 1331948208 ecr 3808005419], length 0 12:01:24.935464 IP plugins.roundcube.net.https > webmail-test.58972: Flags [.], seq 1:1449, ack 349, win 243, options [nop,nop,TS val 1331948209 ecr 3808005419], length 1448 12:01:24.935492 IP webmail-test.58972 > plugins.roundcube.net.https: Flags [.], ack 1449, win 137, options [nop,nop,TS val 3808005485 ecr 1331948209], length 0 12:01:24.935464 IP plugins.roundcube.net.https > webmail-test.58972: Flags [.], seq 1449:2897, ack 349, win 243, options [nop,nop,TS val 1331948209 ecr 3808005419], length 1448 12:01:24.935508 IP webmail-test.58972 > plugins.roundcube.net.https: Flags [.], ack 2897, win 160, options [nop,nop,TS val 3808005485 ecr 1331948209], length 0 12:01:24.935473 IP plugins.roundcube.net.https > webmail-test.58972: Flags [.], ack 349, win 243, options [nop,nop,TS val 1331948209 ecr 3808005419], length 0 12:01:24.935478 IP plugins.roundcube.net.https > webmail-test.58972: Flags [P.], seq 2897:2975, ack 349, win 243, options [nop,nop,TS val 1331948209 ecr 3808005419], length 78 12:01:24.935519 IP webmail-test.58972 > plugins.roundcube.net.https: Flags [.], ack 2975, win 160, options [nop,nop,TS val 3808005485 ecr 1331948209], length 0 12:01:24.937478 IP webmail-test.58972 > plugins.roundcube.net.https: Flags [P.], seq 349:483, ack 2975, win 160, options [nop,nop,TS val 3808005487 ecr 1331948209], length 134 12:01:25.001537 IP plugins.roundcube.net.https > webmail-test.58972: Flags [P.], seq 2975:3225, ack 483, win 260, options [nop,nop,TS val 1331948226 ecr 3808005487], length 250 12:01:25.002056 IP webmail-test.58972 > plugins.roundcube.net.https: Flags [P.], seq 483:909, ack 3225, win 182, options [nop,nop,TS val 3808005552 ecr 1331948226], length 426 12:01:25.101188 IP plugins.roundcube.net.https > webmail-test.58972: Flags [.], ack 909, win 277, options [nop,nop,TS val 1331948251 ecr 3808005552], length 0 then connection hangs in ESTABLISHED state for several minutes. How can I debug the issue? I see this behavior on both production and test server. Production server was running Roundcube Webmail 1.0-rc for a year now. It seems that errors started to occur this Monday... -- Best regards, Alexander Pyhalov, system administrator of Computer Center of Southern Federal University

4 4

Roudcube instlling nginx+php-fpm
by Alexandr Khomenko 10 Jun '14

10 Jun '14

Hi, I'm having a tough time getting roundcube to work. Here's the software I'm using, and the versions: FreeBSD 9.2-RELEASE nginx/1.6.0 PHP 5.4.28 (php-fpm via fastcgi) (all my extensions are listed below) When I browse to /installer/, I get a blank page. Absolutely nothing in my nginx error log, php-fpm log, or php error log. I went through the roundcube requirements list: http://trac.roundcube.net/wiki/Howto_Requirements extension=bz2.so extension=gd.so extension=iconv.so extension=mysql.so extension=session.so extension=xml.so extension=dom.so extension=xmlreader.so extension=xmlwriter.so extension=zlib.so extension=mbstring.so extension=json.so extension=intl.so extension=zip.so extension=filter.so extension=pdo.so extension=pdo_mysql.so Any ideas? Thank you! Best regards, Alexandr Khomenko

2 2

Question about RC upgrade
by absolutely_free＠libero.it 08 Jun '14

08 Jun '14

Hi, I'm going to upgrade from RC 1.0.0 to RC 1.0.1 I will use the ./bin/installto.sh script I don't know if I need to use /bin/indexcontacts.sh script, too. I'm using MySQL backend. Thankyou

2 1

Change Roundcube configuration setting on a per-user basis
by UDE Security 06 Jun '14

06 Jun '14

Hello, I want to migrate our actual webmailer based on Squirrelmail to Roundcube version 0.9.5 (OS Red Hat Enterprise Linux Server release 6.5). Using Squirrelmail together with the VLogin-plugin I can connect a certain user using his account for login (and not an email address) to his defined mailbox which is hosted on a cyrus-imap-linux server or a MS exchange system. At the same time I can activate or switch off the availability of specific plugins (for example a sieve filter plugin). I've already installed a roundcube test system, everything works fine now. But I cannot manage that per-user customising with the roundcube vlogin plugin. Within the plugin package there is a file called "TODO" telling me that these features unfortunately aren't realized at the moment. My question to you: is there a way to implement this behaviour? Are there more possibilities if i upgrade to version 1.0.1? Thank you very much in advance.

1 0

messages list refreshing unexpectedly
by Dan Langille 06 Jun '14

06 Jun '14

I recently upgraded from Roundcube 0.9.x and I'm now using Roundcube 1.0.1 on FreeBSD with PHP 5.5 With the new release, I find that the messages list refreshes after replying or forwarding. This change loses the context you previously had. Any ideas as to why this happens? thanks -- Dan Langille - http://langille.org/

2 2

Order of folders cluttered
by Michael Heydekamp 04 Jun '14

04 Jun '14

I don't know how that happened, but all of a sudden the order my mail folders is totally f*cked up (e.g. the Trash folder being the very last of all folders rather than one of the special folders at the top of the folder list). Because of this incident I realized that I don't know if and how to change the order of folders at all (apart from manually fiddling around with settings in the database). Is there a way...? Cheers -- Michael Heydekamp Co-Admin freexp.de Düsseldorf/Germany

2 14

(issue?) Mailbox refresh
by barul 31 May '14

31 May '14

Hello, I've been using RC for quite some time now, and I'm having an issue; I think it's more a plugin issue, so I ask here just to be sure. I'm using the 'rcubefilters' plugin (http://sourceforge.net/projects/rcubefilters/), and it works great. Tge e-mails filtered are moved into the folders I want them to, but Roundcube doesn't refresh the UI correctly I think; i.e. when I receive a message I see '(1)' near the Inbox, when I click on it, it goes away but I don't see it on another folder. I have to disconnect and reconnect myself into Rouncdube to see all the boxes correctly. It there a settings I can change to make it works correctly, or do I need to use a different type of filters? Thanks in advance, -- barul

2 2

Re: [RCU] (issue?) Mailbox refresh
by Steve Perkins 31 May '14

31 May '14

Yes. A quick refresh always works for me too. Sent from MyPhone Kaz Kylheku <kaz(a)kylheku.com> wrote: >Youmean,theUIdoesn'tbecomeconsistentifyousimplyrefreshthewindowwithyourbrowser'srefreshcommand?Youabsolutelymustlogoutandlogbackin?EveryversionofRCUIhaveeverusedsince0.3somethinghasoccasionallyhadtheUIbecomeiinconsistent,likesometimesshowing(1)wheneverythingisalreadyread.But,cometothinkofit,I'veneverusedaJava-scriptedwebappanywherethatdoesn'thaveglitchesofthissortfromtimetotime,benefitingfromarefreshofthebrowserwindow.On27.05.201411:27,barulwrote:Hello,I'vebeenusingRCforquitesometimenow,andI'mhavinganissue;Ithinkit'smoreapluginissue,soIaskherejusttobesure.I'musingthe'rcubefilters'plugin(http://sourceforge.net/projects/rcubefilters/),anditworksgreat.Tgee-…'trefreshtheUIcorrectlyIthink;i.e.whenIreceiveamessageIsee'(1)'neartheInbox,whenIclickonit,itgoesawaybutIdon'tseeitonanotherfolder.IhavetodisconnectandreconnectmyselfintoRouncdubetoseealltheboxescorrectly.ItthereasettingsIcanchangetomakeitworkscorrectly,ordoIneedtouseadifferenttypeoffilters?Thanksinadvance,--MemorizeJapaneseCharacterswithTankan.

1 0

IMAP support for sort criteria
by Henrik Maaß 29 May '14

29 May '14

Dear all, I want to sort my mails by size, in the old roundcube version it worked without problems, now it seems, that the IMAP server doesn't support the new command. I only use Roundcube online, usually I work with thunderbird and its still working there. I do not know what IMAP server software is used for my system and I do not know how to get to know about it. Who could tell me, what to do now? Thank you, Henrik Am 27.05.2014 17:48, schrieb Thomas Bruederli: > Hello Henrik > > Thanks for your feedback! Sorting by size generally works but it > requires support from the IMAP server. Roundcube sends the IMAP > command "UID SORT (SIZE) US-ASCII ALL" to fetch the messages headers > for listing. Do you know what IMAP server software is used for your > system? It's possible that it one doesn't support this sort criteria > and falls back to arrival date. > > For further questions, please subscribe and post to our users mailing > list: http://lists.roundcube.net > > Kind regards, > Thomas > > > > On Tue, May 27, 2014 at 4:12 PM, Henrik Maaß <maass(a)abl-ev.de> wrote: >> Dear all, >> >> thank you for your work of creating a new version of Roundcube. I already >> have expirienced some helpfull features already. >> >> Maybe you know already, that sorting by size doesn't work yet in this new >> version I use through https://webmail.webspaceconfig.de/ >> >> If I try to sort it by size, the mails are still sorted by date anyhow. >> I hope, this was useful for you. >> >> Ciao, Henrik >> >> -- >> Henrik Maaß >> Weinbergstr. 6 >> 37217 Witzenhausen >> 05542 500267 >> 0160 8217015 >> >> www.abl-ev.de/junge-abl (Junge Arbeitsgemeinschaft bäuerliche >> Landwirtschaft) >> >> www.goodfoodgoodfarming.eu (Kampagne für eine ökologisch-soziale >> Agrarpolitik) >> >> www.nyelenieurope.net (Bewegung für Ernährungssouveränität) >> -- Henrik Maaß Weinbergstr. 6 37217 Witzenhausen 05542 500267 0160 8217015 www.abl-ev.de/junge-abl (Junge Arbeitsgemeinschaft bäuerliche Landwirtschaft) www.goodfoodgoodfarming.eu (Kampagne für eine ökologisch-soziale Agrarpolitik) www.nyelenieurope.net (Bewegung für Ernährungssouveränität)

3 3

idle_timeout plugin
by Valentina Dondi 28 May '14

28 May '14

Hi, I have installed roundcube 1.0 on ubuntu server 12.04 and then I've added plugin manager and idle timeout plugin. I have configured the idle timeout plugin following the guide but it doesn't work; is that a known issue? And how can I solve this problem? Thanks Valentina valentina dondi | system administrator vdondi(a)enter.it | +39 02 25514 | | fax +39 02 25514 303 [cid:753d36d1ac564a40a5204314116d6705] enter | internet service provider via stefanardo da vimercate 28 | 20128 Milano tel +39 02 25514 300 [Cloudup]<http://www.openstackday.it/>

1 0

Re: [RCU] Attaching files is not working for me, what am I missing?
by Ralph Seichter 27 May '14

27 May '14

On 27.05.14 20:15, Reindl Harald wrote: > your *webserver* is unstable and *crashs* Yes, I can see that a process terminates unexpectedly. I am trying to figure out why that is. > that is *not* a roundcube problem as you can see Errors like the one I reported only occur in combination with Roundcube so far, so I asked how to better debug this. I am not trying to pass blame. I'd be happy if it was just me having messed up some settings or suchlike. That would make things much easier. > suhosin.session.encrypt: OK > don't do that! I did not. Gentoo masks dev-php/suhosin for all PHP versions > 5.3, and Suhosin is not installed here. That I verified, and I do not know why Roundcube reports otherwise. Incidentally, the Roundcube installer lists suhosin.session.encrypt in a section "The following settings are required to run Roundcube". > what PHP version? > what distribution? As stated in my original mail, PHP 5.5.12 on Gentoo Linux (with a Kernel 3.14.3 to be precise, I can list specific library versions on request). > what extensions are loaded? > bytecode-cacxhe? which? with what configuration? The only active extension seems to be Zend OPcache v7.0.4-dev, at least from what I can see. > GET RID OF SUHOSIN ON RECENT PHP You have been keeping up that friendly tone of yours for years now, and still you have not had an infarction? You're a lucky guy. ;-) -R

1 0

Attaching files is not working for me, what am I missing?
by Ralph Seichter 27 May '14

27 May '14

Hello list, I can't seem to get attaching files to work (Roundcube 1.0.1, Gentoo Linux, Apache 2.4.9, PHP 5.5.12). Whenever I click "attach a file", select a file and then click "upload", Apache logs messages like these: [core:notice] [pid 9155:tid 140489408571264] AH00052: child pid 9482 exit signal Aborted (6) [core:notice] [pid 9155:tid 140489408571264] AH00052: child pid 9493 exit signal Aborted (6) *** Error in `/usr/sbin/apache2': free(): invalid pointer: 0x00007fc60035f9a8 *** I made sure that $config['temp_dir'] points to a directory writeable by the Apache user. PHP settings ensure that file uploads are allowed. Roundcube reports file_uploads: OK session.auto_start: OK zend.ze1_compatibility_mode: OK mbstring.func_overload: OK suhosin.session.encrypt: OK magic_quotes_runtime: OK magic_quotes_sybase: OK I wonder how to better debug this problem to figure out what I am doing wrong here. Can you guys help me with this? -R

1 0

Re: [RCU] users Digest, Vol 83, Issue 11
by Ricardo Adolfo Sánchez Arboleda 27 May '14

27 May '14

Thanks for answering Timo [...] Ip.xxx.xxx.xxx / webmail / installer / index.php? _Step = 3 SMTP Sender: rasa996412(a)gmail.com IMAP Server: gmail.com Port: 143 I can only send mail to my gmail account and what I need is to receive and / or send to my domain name; well: ricardoasa(a)ingenierasa.org ::: Kev change this IMAP :::::: $ Rcmail_config ['default_host'] = 'ssl :/ / imap.gmail.com: 993'; / / TCP port connections used for IMAP $ Rcmail_config ['default_port'] = 143; by $ rcmail_config ['default_host'] = 'ssl :/ / imap.gmail.com'; / / TCP port connections used for IMAP $ rcmail_config ['default_port'] = 993; Unchanged, send email. But if I send mail to this account ricardoasa(a)ingenierasa.org having my domain name. Not receive ..? Note: what I want is that my server allows WebmailRoundcube receive mail with this account ricardoasa(a)ingenierasa.org *Saludes;* rasa. 2014-05-26 5:00 GMT-05:00 <users-request(a)lists.roundcube.net>: > Send users mailing list submissions to > users(a)lists.roundcube.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.roundcube.net/mailman/listinfo/users > or, via email, send a message with subject or body 'help' to > users-request(a)lists.roundcube.net > > You can reach the person managing the list at > users-owner(a)lists.roundcube.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of users digest..." > > > Today's Topics: > > 1. Re: Order of folders cluttered (A.L.E.C) > 2. I do not receive mail (Ricardo Adolfo S?nchez Arboleda) > 3. Re: I do not receive mail (Timo Brandt) > 4. Re: I do not receive mail (kev(a)xithing.com) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 25 May 2014 12:07:26 +0200 > From: "A.L.E.C" <alec(a)alec.pl> > To: users(a)lists.roundcube.net > Subject: Re: [RCU] Order of folders cluttered > Message-ID: <5381C0DE.6090706(a)alec.pl> > Content-Type: text/plain; charset=UTF-8 > > On 05/23/2014 10:33 PM, Michael Heydekamp wrote: >> I don't know how that happened, but all of a sudden the order my mail >> folders is totally f*cked up (e.g. the Trash folder being the very last of >> all folders rather than one of the special folders at the top of the folder >> list). >> >> Because of this incident I realized that I don't know if and how to change >> the order of folders at all (apart from manually fiddling around with >> settings in the database). > > Git-master? That might be related to > https://github.com/roundcube/roundcubemail/commit/693612d396ede5c7ed8dc36e7… > but it works for me. What operating system? What PHP version? What UI > language (locale)? > > -- > Aleksander 'A.L.E.C' Machniak > LAN Management System Developer [http://lms.org.pl] > Roundcube Webmail Developer [http://roundcube.net] > --------------------------------------------------- > PGP: 19359DC1 @@ GG: 2275252 @@ WWW: http://alec.pl > > > ------------------------------ > > Message: 2 > Date: Sun, 25 May 2014 16:11:44 -0500 > From: Ricardo Adolfo S?nchez Arboleda <rasa996412(a)gmail.com> > To: users(a)lists.roundcube.net > Subject: [RCU] I do not receive mail > Message-ID: > <CAE=ryQ_=CkNmQkkA_A2OxmKct+mOiaG92odPk6unaGdUegFDqg(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > In Debian Wheezy more Roundcube Webmail 0.9.5 installed I ; these identities : > This ricardoasa(a)ingenierasa.org account that has my domain name I can > send email, but not receive . > get error : > Subject Delivery Status Notification ( Failure) > SubsystemAdd contact sender Mail Delivery > Recipient rasa996412(a)gmail.comAdd contact > Date Today 15:12 > > Delivery to the following recipient failed permanently : > > ricardoasa(a)ingenierasa.org > > Technical details of permanent failure: > Google tried to deliver your message , but it was rejected by the > server for the recipient domain ingenierasa.org by ingenierasa.org . [ > 190,146,204,168 ] . > > The Error That the other server returned was: > <ricardoasa(a)ingenierasa.org> 554 5.7.1 : Relay access denied > > ----- Original message ----- > > DKIM -Signature : v = 1; a = rsa- sha256 ; c = relaxed / relaxed ; > d = gmail.com ; s = 20120113 ; > h = mime -version : date : message -id : subject: from: to: > content -type ; > bh = oC/TZVePwdcItXZup20dZLw4pOkA6HJIdqgNqLFqh6w = ; > b = 098peNl8crbovGenvQtRD0gvdxVFPnjShnnDeXHELDecTsP8GcwRIx1WkpJ7WxjnbM > lFGSoLtDbPbSpmStHTZBBwThk12jN7q4Oy +2 ba4N0Q6THEbbQdk4d0pXF3f6lBCjwHKf > nTsAk1Xs7xL +8 + n + xikECQSpTSMla56 > FYgX1pnIVfXiKOj7D5Flee95H8noFyfuyq7ca > 5p8g5/afC0dXbVYcAEnIFSwEyiZs8xVSsgu1rbOslIiZY8e5s + XHBXHelyANKKbR3K5v > pF1Gp1XYn3NINkxJqG1Mag7uRsvrNlWLX2JkLWI0 + ZrYtdFcii83gZVf2u48FM35EHzs > vRwA == > MIME -Version: 1.0 > X - Received : by 10.182.158.73 with SMTP id ws9mr15830603obb.14.1401048753762 ; > Sun , 25 May 2014 13:12:33 -0700 (PDT ) > Received : by 10.182.199.97 with HTTP; Sun , 25 May 2014 13:12:33 -0700 (PDT ) > Date: Sun , 25 May 2014 15:12:33 -0500 > Message- ID : <CAE=ryQ8F0gOvvVgAWsLs=GJSBN_q8tNFXJ0OLFHAE+3jdURSJw(a)mail.gmail.com> > Subject : test2 > >From : ? = ISO- 8859-1 Q = Ricardo_Adolfo_S E1nchez_Arboleda = > <rasa996412(a)gmail.com> ? > To : ? = ISO- 8859-1 Q = ricardo_adolfo_s E1nchez_arboleda = > <ricardoasa(a)ingenierasa.org> ? > Content- Type : text / plain ; charset = ISO- 8859-1 > IMAP ::: ::: > $ rcmail_config [' default_host '] = ' ssl :/ / imap.gmail.com : 993 '; > / / TCP port connections used for IMAP > $ rcmail_config [' default_port '] = 143; > SMTP ::: ::: > $ rcmail_config [' smtp_server '] =''; > / / SMTP port (default is 25 , use 587 or 465 for STARTTLS for the > / / Deprecated SMTP over SSL (aka SMTPS ) ) > $ rcmail_config [' smtp_port '] = 25 ; > > [ ... ] Edit where to send and receive mail with my domain name and > avoid this error. > > Thank you, > > > *Saludes;* > > rasa. > > > ------------------------------ > > Message: 3 > Date: Sun, 25 May 2014 23:21:27 +0200 > From: Timo Brandt <mail(a)timo-brandt.de> > To: Roundcube Users mailing list <users(a)lists.roundcube.net> > Subject: Re: [RCU] I do not receive mail > Message-ID: > <ae50b1a7-7c97-4c32-be5b-d35f0dea8411(a)katmail.1gravity.com> > Content-Type: text/plain; charset="utf-8" > > Its a configuration problem with your Mailserver. It tells you, that this email was rejected because you using a mail relay. > > Which mailserver did you use? > > Timo > > > > ---------------------- > Timo Brandt > Postfach 1115 > 37615 Bodenwerder > > Hausanschrift: > Timo Brandt > Unter der Alpke 2 > 37619 Bodenwerder > > Tel.: 05533/938103 (18-22 Uhr) > Fax.:05533/9381039 > Mobil: 0162/2475066 (05-22 Uhr) > eMail: mail(a)timo-brandt.de > > Skype: timo.brandt > ICQ: 307603660 > > > -------- Original-Nachricht -------- > Von: "Ricardo Adolfo S?nchez Arboleda" <rasa996412(a)gmail.com> > Gesendet: Sun May 25 23:11:44 MESZ 2014 > An: users(a)lists.roundcube.net > Betreff: [RCU] I do not receive mail > > In Debian Wheezy more Roundcube Webmail 0.9.5 installed I ; these identities : > This ricardoasa(a)ingenierasa.org account that has my domain name I can > send email, but not receive . > get error : > Subject Delivery Status Notification ( Failure) > SubsystemAdd contact sender Mail Delivery > Recipient rasa996412(a)gmail.comAdd contact > Date Today 15:12 > > Delivery to the following recipient failed permanently : > > ricardoasa(a)ingenierasa.org > > Technical details of permanent failure: > Google tried to deliver your message , but it was rejected by the > server for the recipient domain ingenierasa.org by ingenierasa.org . [ > 190,146,204,168 ] . > > The Error That the other server returned was: > <ricardoasa(a)ingenierasa.org> 554 5.7.1 : Relay access denied > > ----- Original message ----- > > DKIM -Signature : v = 1; a = rsa- sha256 ; c = relaxed / relaxed ; > d = gmail.com ; s = 20120113 ; > h = mime -version : date : message -id : subject: from: to: > content -type ; > bh = oC/TZVePwdcItXZup20dZLw4pOkA6HJIdqgNqLFqh6w = ; > b = 098peNl8crbovGenvQtRD0gvdxVFPnjShnnDeXHELDecTsP8GcwRIx1WkpJ7WxjnbM > lFGSoLtDbPbSpmStHTZBBwThk12jN7q4Oy +2 ba4N0Q6THEbbQdk4d0pXF3f6lBCjwHKf > nTsAk1Xs7xL +8 + n + xikECQSpTSMla56 > FYgX1pnIVfXiKOj7D5Flee95H8noFyfuyq7ca > 5p8g5/afC0dXbVYcAEnIFSwEyiZs8xVSsgu1rbOslIiZY8e5s + XHBXHelyANKKbR3K5v > pF1Gp1XYn3NINkxJqG1Mag7uRsvrNlWLX2JkLWI0 + ZrYtdFcii83gZVf2u48FM35EHzs > vRwA == > MIME -Version: 1.0 > X - Received : by 10.182.158.73 with SMTP id ws9mr15830603obb.14.1401048753762 ; > Sun , 25 May 2014 13:12:33 -0700 (PDT ) > Received : by 10.182.199.97 with HTTP; Sun , 25 May 2014 13:12:33 -0700 (PDT ) > Date: Sun , 25 May 2014 15:12:33 -0500 > Message- ID : <CAE=ryQ8F0gOvvVgAWsLs=GJSBN_q8tNFXJ0OLFHAE+3jdURSJw(a)mail.gmail.com> > Subject : test2 > >From : ? = ISO- 8859-1 Q = Ricardo_Adolfo_S E1nchez_Arboleda = > <rasa996412(a)gmail.com> ? > To : ? = ISO- 8859-1 Q = ricardo_adolfo_s E1nchez_arboleda = > <ricardoasa(a)ingenierasa.org> ? > Content- Type : text / plain ; charset = ISO- 8859-1 > IMAP ::: ::: > $ rcmail_config [' default_host '] = ' ssl :/ / imap.gmail.com : 993 '; > / / TCP port connections used for IMAP > $ rcmail_config [' default_port '] = 143; > SMTP ::: ::: > $ rcmail_config [' smtp_server '] =''; > / / SMTP port (default is 25 , use 587 or 465 for STARTTLS for the > / / Deprecated SMTP over SSL (aka SMTPS ) ) > $ rcmail_config [' smtp_port '] = 25 ; > > [ ... ] Edit where to send and receive mail with my domain name and > avoid this error. > > Thank you, > > > *Saludes;* > > rasa. > _______________________________________________ > Roundcube Users mailing list > users(a)lists.roundcube.net > http://lists.roundcube.net/mailman/listinfo/users >

1 0

I do not receive mail
by Ricardo Adolfo Sánchez Arboleda 26 May '14

26 May '14

In Debian Wheezy more Roundcube Webmail 0.9.5 installed I ; these identities : This ricardoasa(a)ingenierasa.org account that has my domain name I can send email, but not receive . get error : Subject Delivery Status Notification ( Failure) SubsystemAdd contact sender Mail Delivery Recipient rasa996412(a)gmail.comAdd contact Date Today 15:12 Delivery to the following recipient failed permanently : ricardoasa(a)ingenierasa.org Technical details of permanent failure: Google tried to deliver your message , but it was rejected by the server for the recipient domain ingenierasa.org by ingenierasa.org . [ 190,146,204,168 ] . The Error That the other server returned was: <ricardoasa(a)ingenierasa.org> 554 5.7.1 : Relay access denied ----- Original message ----- DKIM -Signature : v = 1; a = rsa- sha256 ; c = relaxed / relaxed ; d = gmail.com ; s = 20120113 ; h = mime -version : date : message -id : subject: from: to: content -type ; bh = oC/TZVePwdcItXZup20dZLw4pOkA6HJIdqgNqLFqh6w = ; b = 098peNl8crbovGenvQtRD0gvdxVFPnjShnnDeXHELDecTsP8GcwRIx1WkpJ7WxjnbM lFGSoLtDbPbSpmStHTZBBwThk12jN7q4Oy +2 ba4N0Q6THEbbQdk4d0pXF3f6lBCjwHKf nTsAk1Xs7xL +8 + n + xikECQSpTSMla56 FYgX1pnIVfXiKOj7D5Flee95H8noFyfuyq7ca 5p8g5/afC0dXbVYcAEnIFSwEyiZs8xVSsgu1rbOslIiZY8e5s + XHBXHelyANKKbR3K5v pF1Gp1XYn3NINkxJqG1Mag7uRsvrNlWLX2JkLWI0 + ZrYtdFcii83gZVf2u48FM35EHzs vRwA == MIME -Version: 1.0 X - Received : by 10.182.158.73 with SMTP id ws9mr15830603obb.14.1401048753762 ; Sun , 25 May 2014 13:12:33 -0700 (PDT ) Received : by 10.182.199.97 with HTTP; Sun , 25 May 2014 13:12:33 -0700 (PDT ) Date: Sun , 25 May 2014 15:12:33 -0500 Message- ID : <CAE=ryQ8F0gOvvVgAWsLs=GJSBN_q8tNFXJ0OLFHAE+3jdURSJw(a)mail.gmail.com> Subject : test2 >From : ? = ISO- 8859-1 Q = Ricardo_Adolfo_S E1nchez_Arboleda = <rasa996412(a)gmail.com> ? To : ? = ISO- 8859-1 Q = ricardo_adolfo_s E1nchez_arboleda = <ricardoasa(a)ingenierasa.org> ? Content- Type : text / plain ; charset = ISO- 8859-1 IMAP ::: ::: $ rcmail_config [' default_host '] = ' ssl :/ / imap.gmail.com : 993 '; / / TCP port connections used for IMAP $ rcmail_config [' default_port '] = 143; SMTP ::: ::: $ rcmail_config [' smtp_server '] =''; / / SMTP port (default is 25 , use 587 or 465 for STARTTLS for the / / Deprecated SMTP over SSL (aka SMTPS ) ) $ rcmail_config [' smtp_port '] = 25 ; [ ... ] Edit where to send and receive mail with my domain name and avoid this error. Thank you, *Saludes;* rasa.

3 2

Update 1.0.1 out now
by Thomas Bruederli 23 May '14

23 May '14

Dear Roundcube users We can proudly announce the first service release to update the stable version 1.0 of Roundcube webmail. It contains some important bug fixes and improvements, primarily a fix for the unintentional redirect from the compose page in Google Chrome which likely started to appear after a recent Chrome update. It's considered stable and we recommend to update all productive installations of Roundcube with this version. Download it from http://roundcube.net/download, see the full changelog here: http://trac.roundcube.net/wiki/Changelog Please note that the update includes a small MySQL database schema change, thus make sure you run the update script. Kind regards, Thomas

5 6

Plugin password error - driver chpasswd
by Daniel Lopez 23 May '14

23 May '14

Hello, I Install roundcubemail using EPEL repository: # wget http://dl.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm # rpm -ivh epel-release-6-8.noarch.rpm # yum install roundcubemail I have the following settings: CentOS 6.4 Apache 2.2.15 PHP 5.3.3 MySQL 5.1.69 Roundcube Webmail 0.9.5 Plugin password 3.2 Users are not saved in the database, are stored in the operating system: /etc/passwd /etc/shadow cat /etc/roundcubemail/main.inc.php $rcmail_config['default_host'] = 'domain.com'; $rcmail_config['plugins'] = array(password); cat /usr/share/roundcubemail/plugins/password/config.inc.php $rcmail_config['password_driver'] = 'chpasswd'; cat /etc/sudoers apache ALL=NOPASSWD: /usr/sbin/chpasswd When I try to save the password change displays the message: an error has occurred, it can not save the new password cat /var/log/roundcubemail/errors PHP Error: Password plugin: Unable to execute sudo /usr/sbin/chpasswd 2> /dev/null in /usr/share/roundcubemail/plugins/password/drivers/chpasswd.php on line 32 (POST /mail/?_task=settings&_action=plugin.password-save?_task=&_action=) please help to find the error Daniel Lopez

1 0

Re: [RCU] Testing Roundcube 1.0.x
by Steve Perkins 22 May '14

22 May '14

Surely the whole point about a test/staging system is any glitches won't impact on the production system. Mixing them the way you suggest would mean any problems with the test system would also impact the live one. Would this not be self defeating ? Sent from MyPhone David Carter <dpc22(a)cam.ac.uk> wrote: >We expect to upgrade from Roundcube 0.9.5 to 1.0.x over the summer >vacation (my management chain and I prefer not to make substantial >changes during the academic year). > >Something that I would like to do if possible is have a period of >parallel running so that people can kick the tires and make sure that >our small collection of local plugins and our local skin are working >correctly for a few days or weeks before we commit to running the new >version. > >I can of course dump and restore the existing Roundcube database to >build a completely independent Roundcube 1.0.1 test system off to one >side, away from the production servers. > >However if I look at the handful of database upgrade steps from 0.9.5 to >1.0.1, the only significant change would appear to be the attached >renaming of sequences (we aren't using any of the cache tables). > > .../SQL/postgres/2013042700.sql : > > ALTER SEQUENCE user_ids RENAME TO users_seq; > ALTER TABLE users ALTER COLUMN user_id SET DEFAULT >nextval('users_seq'::text); > > ALTER SEQUENCE identity_ids RENAME TO identities_seq; > ALTER TABLE identities ALTER COLUMN identity_id SET DEFAULT >nextval('identities_seq'::text); > > ALTER SEQUENCE contact_ids RENAME TO contacts_seq; > ALTER TABLE contacts ALTER COLUMN contact_id SET DEFAULT >nextval('contacts_seq'::text); > > ALTER SEQUENCE contactgroups_ids RENAME TO contactgroups_seq; > ALTER TABLE contactgroups ALTER COLUMN contactgroup_id SET DEFAULT >nextval('contactgroups_seq'::text); > > ALTER SEQUENCE search_ids RENAME TO searches_seq; > ALTER TABLE searches ALTER COLUMN search_id SET DEFAULT >nextval('searches_seq'::text); > >These sequence names appear to be hard-wired in 1.0.1. > >However Roundcube 0.9.5 can be reconfigured to use any names, including >the names used by 1.0.1: > > // you can define specific sequence names used in PostgreSQL > $rcmail_config['db_sequence_users'] = 'users_seq'; > $rcmail_config['db_sequence_identities'] = 'identities_seq'; > $rcmail_config['db_sequence_contacts'] = 'contacts_seq'; > $rcmail_config['db_sequence_contactgroups'] = 'contactgroups_seq'; > $rcmail_config['db_sequence_searches'] = 'searches_seq'; > >A brief experiment on a test system suggests that I can safely switch >back and forth between Roundcube 0.9.5 and 1.0.1 with this single >configuration change at the 0.9.5 end. > >My question is whether this is a sensible thing to try and do. Are there >incompatible changes in the various preferences databases which aren't >reflected in the database schema? That would require an independent test >system. > >Thanks, > >-- >David Carter Email: >David.Carter(a)uis.cam.ac.uk >University of Cambridge, Phone: (01223) 334502 >Information Services, Fax: (01223) 334679 >7 J J Thomson Avenue, >Cambridge UK. CB3 0RB > >_______________________________________________ >Roundcube Users mailing list >users(a)lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users

2 1

Testing Roundcube 1.0.x
by David Carter 22 May '14

22 May '14

We expect to upgrade from Roundcube 0.9.5 to 1.0.x over the summer vacation (my management chain and I prefer not to make substantial changes during the academic year). Something that I would like to do if possible is have a period of parallel running so that people can kick the tires and make sure that our small collection of local plugins and our local skin are working correctly for a few days or weeks before we commit to running the new version. I can of course dump and restore the existing Roundcube database to build a completely independent Roundcube 1.0.1 test system off to one side, away from the production servers. However if I look at the handful of database upgrade steps from 0.9.5 to 1.0.1, the only significant change would appear to be the attached renaming of sequences (we aren't using any of the cache tables). .../SQL/postgres/2013042700.sql : ALTER SEQUENCE user_ids RENAME TO users_seq; ALTER TABLE users ALTER COLUMN user_id SET DEFAULT nextval('users_seq'::text); ALTER SEQUENCE identity_ids RENAME TO identities_seq; ALTER TABLE identities ALTER COLUMN identity_id SET DEFAULT nextval('identities_seq'::text); ALTER SEQUENCE contact_ids RENAME TO contacts_seq; ALTER TABLE contacts ALTER COLUMN contact_id SET DEFAULT nextval('contacts_seq'::text); ALTER SEQUENCE contactgroups_ids RENAME TO contactgroups_seq; ALTER TABLE contactgroups ALTER COLUMN contactgroup_id SET DEFAULT nextval('contactgroups_seq'::text); ALTER SEQUENCE search_ids RENAME TO searches_seq; ALTER TABLE searches ALTER COLUMN search_id SET DEFAULT nextval('searches_seq'::text); These sequence names appear to be hard-wired in 1.0.1. However Roundcube 0.9.5 can be reconfigured to use any names, including the names used by 1.0.1: // you can define specific sequence names used in PostgreSQL $rcmail_config['db_sequence_users'] = 'users_seq'; $rcmail_config['db_sequence_identities'] = 'identities_seq'; $rcmail_config['db_sequence_contacts'] = 'contacts_seq'; $rcmail_config['db_sequence_contactgroups'] = 'contactgroups_seq'; $rcmail_config['db_sequence_searches'] = 'searches_seq'; A brief experiment on a test system suggests that I can safely switch back and forth between Roundcube 0.9.5 and 1.0.1 with this single configuration change at the 0.9.5 end. My question is whether this is a sensible thing to try and do. Are there incompatible changes in the various preferences databases which aren't reflected in the database schema? That would require an independent test system. Thanks, -- David Carter Email: David.Carter(a)uis.cam.ac.uk University of Cambridge, Phone: (01223) 334502 Information Services, Fax: (01223) 334679 7 J J Thomson Avenue, Cambridge UK. CB3 0RB

1 0

Upgrade from 0.95 to 1.0.1 : only first three emails displayed
by S Loewenthal 21 May '14

21 May '14

Hi, I was wondering if somebody had seen this issue when after initial upgrade from 0.9.5 to 1.0.1 the RC displays only the first three emails. I used ./bin/install.sh <target_dir> for my update. I rolled back to 0.9.5 by removing the newly installed directory and rolling back my previous copy and all emails were displayed again. Below I've copied how my upgrade unfolded, because it had some errors but I don't see how they should have caused the 3 email only issue. Running update script at target... NOTICE: Obsolete config options: (You still have some obsolete or inexistent properties set. This isn't a problem but should be noticed) - 'mime_magic' Do you want me to fix your local configuration? (y/N) y . backing up the current config file(s)... . writing /www/roundcube/config/config.inc.php... Done. Your configuration files are now up-to-date! WARNING: File type detection doesn't work properly! Please check the 'mime_magic' config option or the finfo functions of PHP and run this script again. Executing database schema update. Updating database schema (2013042700)... [OK] Updating database schema (2013052500)... [OK] ERROR: Error in DDL upgrade 2013061000: [1146] Table 'roundcubemail.cache_index' doesn't existUpdating database schema (2013061000)... [FAILED] All done. Lots of thanks if anybody could give me some help. Si. -- "I decided that I was a lemon for a couple of weeks. I kept myself amused all that time jumping in and out of a gin and tonic." pgp 4BA78604

3 2

Increase attachment file size in php.ini
by barul 03 May '14

03 May '14

Hello, I'd like to be able to send attachment bigger than default 2M size limit. In my php.ini's (I have 2 files, one in /etc/php/cgi, the other in /etc/php/cli), I've changed upload_max_filesize to 10M, but I still cannot send big attachments. Do I need to restart something to make the changes effective? Thanks, -- barul

3 3

Roundcube 1.0.0 exits "compose" after a time
by Zach La Celle 02 May '14

02 May '14

On Roundcube 1.0.0, if the user starts composing an email then leaves it for a few (5?) minutes, the software saves the composition to draft then exits back to the inbox. This did not used to happen on 7.1.0. Is there any way to prevent autosave of draft from kicking the user out of Compose?

3 6

Cannot resize pages on smartphone on RC upgrade (7.1.0 -> 1.0.0)
by Zach La Celle 01 May '14

01 May '14

Hello, After upgrading Roundcube from 7.1.0 (the repo version for Ubuntu 12.0.4) to 1.0.0 (downloaded from the website), users are reporting that they can no longer resize the page in their smartphone browser. I've confirmed this with Chrome on a Galaxy S3. Two finger dragging no longer works, and thus the software is much more difficult to use on the mobile device. Is there any reason that this functionality was broken from 7.1.0 to 1.0.0? Thank you.

1 0

Attachments Issue
by IngVittorio 29 Apr '14

29 Apr '14

Hello, I have an issue with roundcube webmail, I'm currently using v 0.9.0. Whenever I send attachments in bulk with a new mail, let's say I add 6 files and then 4 more files, I frequently notice that i'm losing attachments. After I send the email I can see that 2-3 attachments are missing. By giving a look at the code I saw that in this portion of the code inside sendmail.inc : /// sort attachments to make sure the order is the same as in the UI (#1488423) if ($files = rcube_utils::get_input_value('_attachments', rcube_utils::INPUT_POST)) { $files = explode(',', $files); $files = array_flip($files); foreach ($files as $idx => $val) { $files[$idx] = $COMPOSE['attachments'][$idx]; unset($COMPOSE['attachments'][$idx]); } $COMPOSE['attachments'] = array_merge(array_filter($files), $COMPOSE['attachments']); }/ The amount of entries inside $files is greater than the ones in $COMPOSE['attachments'] resulting in a leak in the attachments added to the email. I tried to figure out how to fix this issue but I'm still kinda lost. Could you please help me? Thank in advance, Vittorio -- View this message in context: http://roundcube-webmail.10982.n7.nabble.com/Attachments-Issue-tp12199.html Sent from the Users mailing list archive at Nabble.com.

2 1

Multi message import from zip file?
by Martin Egge 29 Apr '14

29 Apr '14

Hi, I've exported some messages within a zip file via zipdownload. Is there a way (or a plugin) to import the zip file instead of importing all messages seperately? Regards, Martin

2 1

Support IMAP MOVE extension [RFC 6851]
by Martin Egge 28 Apr '14

28 Apr '14

Hi, the CHANGELOG for Roundcube Webmail says there is support for IMAP MOVE extension [RFC 6851] since 1.0.0-beta. So how do I setup Roundcube in order to move some messages from one account to another? Regards, Martin

2 1

Upgrading via Git
by deoren 16 Apr '14

16 Apr '14

Hi, I found the official upgrade directions here: http://trac.roundcube.net/wiki/Howto_Upgrade http://trac.roundcube.net/browser/github/UPGRADING which goes mentions using the installto.sh script to handle upgrades. However I installed from Git and so far haven't had problems. To upgrade to v1.0 I ran: cd /path/to/my/roundcube/install/dir git fetch git checkout 1.0.0 From what I can tell I'm done, but I wanted to check and see if there is a post-upgrade step I'm missing. Looking over the upgrade guide I don't see mention of any database upgrade steps like MediaWiki or WordPress uses. Am I missing anything? For reference this is what I see in the "About" (upper left-hand corner): Roundcube Webmail 1.0.0 [GIT 20140405.0225] Thanks! P.S. Sending this from a Roundcube Webmail 1.0.0 installation. Thanks to the devs for all of their hard work!

2 2

RoundCube 1.0..0 request timeout
by Denny Jones 15 Apr '14

15 Apr '14

Hello, I have a user trying to forward an email with 5 large attachments from within RoundCube 1.0.0. The process ends with a request timeout. Is this a php timeout or a RoundCube timeout? How do I fix this? Denny

1 0

issue with CardDav
by Andreas Meyer 15 Apr '14

15 Apr '14

Hello! I am using Roundcube 0.9.4. When I delete a contact in CardDav I get the following error in the log: v0.5.1 | carddav_server_id: 6 | CardDAV-Server XML-Response is malformed. Synchronization aborted! I tried to solve this like said in https://github.com/graviox/Roundcube-CardDAV/issues/28 and https://github.com/graviox/Roundcube-CardDAV/issues/29 but that does not fix the problem. Is there a working solution know to this? Greetings Andreas

1 0

the password plugin
by Andreas Meyer 11 Apr '14

11 Apr '14

Hello! I got the password plugin working. The problem I have is that the SASL-users are also located in a MySQL-table named sasl. Now when a user changes her password I want to change also the password in the SASL-table. I tried with two password_queries $rcmail_config['password_query'] = 'UPDATE mailbox SET password=%p WHERE username=%u AND password=%o LIMIT 1'; $rcmail_config['password_query'] = 'UPDATE sasl SET password=%p WHERE username=%u AND password=%o LIMIT 1'; but that does not work. Then I tried the following but that also did not work. $rcmail_config['password_query'] = 'UPDATE mailbox, sasl SET password=%p WHERE username=%u AND password=%o LIMIT 1'; I don't know how to join or concatenate this two queris to one. Can somebody help? Greetings Andreas

3 6

apache access log entries
by Joerg Rohrer 11 Apr '14

11 Apr '14

Hi Since i updated to RC 1.0 i see incredible long log entries during Autorefresh. Basically i don't care, but webalizer always tells me that the log-line are to long together with an error. Below just a snip from one line: /rc/?_task=mail&_mbox=INBOX.Lists.Roundcube&_folderlist=1&_quota=1&_list=1&_uids=1465%2C1466%2C1467%2C1461%2C1464%2C1462%2C1463%2C1458%2C1460%2C1421%2C1422%2C1424%2C1459%2C1457%2C1453%2C1454%2C1455%2C1456%2C1450%2C1452%2C1451%2C1446%2C1447%2C1448%2C1449%2C1445%2C1435%2 The full entry is much more longer (approx 2700 chars). If needed i can post. I wonder if its "working as designed" or not. And if its somehow possible to change it. Thanks Jörg

2 2

Roundcube Webmail 1.0.0 released
by Thomas Bruederli 10 Apr '14

10 Apr '14

Dear Roundcube users We’re very proud to announce the stable version 1.0 of Roundcube Webmail. After more than 8 years since the project was initially published, we now feel confident enough to name it one-dot-oh. From the last stable version we added to following new features: * Cleaned up the configuration into a single file * Importing email messages and contact group assignments * Advanced LDAP address book functionality * A toggle to switch between HTML and plaintext view * Save drafts in local storage for recovery * Canned responses to save and recall boilerplate texts * Improved keyboard navigation in messages list * Optimized UI to work on tablet devices * Attachment reminder plugin Furthermore we were busy cleaning up the codebase, fixing a lot of bugs, making it more stable and writing more documentation. With this release, we’d also like to introduce the Roundcube plugins repository at http://plugins.roundcube.net. This central platform should help you find the right plugins for your Roundcube installation and it makes it simple to keep them up-to-date. The installation and update mechanism is based on Composer [1] and Packagist [2]. We’d also like to encourage plugin developers to publish their plugins on this platform. Please read the instructions [3] how to prepare your plugin for publishing. After lots of testing and collecting your feedback, this version is considered stable and we recommend to update all productive installations of Roundcube. Download the fresh webmail and framework packages from http://roundcube.net/download Read the full list of changes here: http://trac.roundcube.net/wiki/Changelog Now after the big release is finally out, it's about time to open a beer :-) Cheers! Thomas [1] https://getcomposer.org [2] https://packagist.org [3] http://plugins.roundcube.net/about

2 1

Mail() Verses SMTP Server Settings
by Denny Jones 08 Apr '14

08 Apr '14

Regarding: $config['smtp_server'] = ''; The default.inc.php config file notes that: // SMTP server host (for sending mails). // To use SSL/TLS connection, enter hostname with prefix ssl:// or tls:// // If left blank, the PHP mail() function is used Sending messages are slow on my installation when sent via RoundCube (both RoundCube and QMail are on the same server). I'm wondering if supplying actual SMTP server information will have any impact on this. Has anyone had experience in this area? Thanks, Denny

2 1

Dragging and dropping emails fails after so many moves
by deoren 26 Mar '14

26 Mar '14

Hi all, I'm posting here to see if others have the same issue before I submit a new bug report for this issue. I have Roundcube 1.0 RC installed with the following plug-ins activated: $config['plugins'] = array( 'managesieve', 'markasjunk', 'identity_select', 'show_additional_headers', 'userinfo', 'password', 'dkimstatus', 'keyboard_shortcuts', 'html5_notifier', 'contextmenu', 'message_highlight', ); After the Inbox fills with a variety of emails I'll manually sort some of them by selecting them (Ctrl + mouse click) and then dragging/dropping into the appropriate folders. This works well the first few times I do it, but at some point I'm no longer able to move them via drag/drop. I've been able to reproduce this in recent versions of Mozilla Firefox and Google Chrome. Has anyone else had this problem and if so, what was the fix? Thank you for your time.

3 3

Opsætning til Window live mail.
by Randi Frisdahl 25 Mar '14

25 Mar '14

Ønsker at få overført mailes til Windows live mail, men bliver blokeret hele tiden hvor den spørger om brugernavn og adgangskode til serveren. Det tyder på at jeg mangler en tilladelse fra Roundcube til at hente mailen ned på Windows live mail. -- Med venlig hilsen Randi Frisdahl Dahls Metalopkøb ApS Kontor/bogholderi Tlf.nr. +45 58 14 53 40 E-mail adr.:randi@dahls-metal.dk

2 1

Threaded messages & Jira ticket tracking.
by Ken D'Ambrosio 24 Mar '14

24 Mar '14

Hi. First, I have my inbox messages threaded. Next, my company uses Jira (https://www.atlassian.com/software/jira) as our ticket tracking software. Whenever a ticket is updated, a corresponding e-mail is sent out to everyone involved on the ticket. What puzzles me is that when I receive one of these e-mails, all the previous corresponding e-mails show up underneath it -- not the way that threaded messages do, where you need to click the drop-down, just below it. This means that e-mails that are days or even months old show up on top of ones I might have received five minutes ago. Here's an example: http://milliways.jots.org/~ken/nothread.png So -- where would I go about fixing the criteria for threading? Roundcube is clearly recognizing these messages as related, but isn't treating them as a proper thread. I either want it to ignore the older ones, or thread them, but not this weird in-between thing. Thanks, -Ken P.S. My Roundcube is 0.95, and works flawlessly otherwise.

1 0

customize roundcube webmail
by Paolo De Michele 20 Mar '14

20 Mar '14

Hi everybody, I integrated roundcube into ISPConfig and actually it works now, when I go to the webmail I have: www.domain.ext/webmail I would like to have webmail.domain.ext (I have apache2) How can I fix it? Let me know, thanks in advance Regards

3 3

Attachments whose names has accented characters issue
by Jorge 17 Mar '14

17 Mar '14

Hi, I have problem when I want to see emails that have attachments whose names has accented characters (á, é, ñ, etc.) When I receive an email with attachment whose name has accented characters, the attachment is ignored. Can anyone help me, and suggest some way to solve this situation. Thanks in advance. Jorge Colaccini

1 0

' in body of Emails
by Denny Jones 17 Mar '14

17 Mar '14

Hello, I have a server running QmailToaster and Roundcube Webmail .0.9.5 I have one user who gets her apostrophies replace with ' No other users complain of this. I can't reproduce the issue. The only way she knows it's happened is when the user replies back to her. I think it's happening on the other end but before I start directing the blame else where I want to know if anyone else has seen this issue. Thoughts? Denny

3 4

Password-Plugin / DSN-Issues
by Sydney Meyer 13 Mar '14

13 Mar '14

Nevermind. Well, what can i say.. Faulty Privileges on the DB, due to my tiny brain. I am sorry for the fuzz. Going to get some sleep then. Cheers, S.

1 0

Password-Plugin / DSN-Issues
by Sydney Meyer 12 Mar '14

12 Mar '14

Hello Everybody, i'm having a hard time getting RC to work with the "password"-Plugin. Even though the DSN is set to @10.0.1.51 (MySQL with the Users/PW) RC tries to connect to the DB @10.0.1.52, it's own IP-Address (RC with local MySQL), where it obviously fails with the error message stated below, when trying to change the password. In ~/plugins/password/config.inc.php i have defined: $rcmail_config['password_db_dsn'] = 'mysql://mailuser:passwd@10.0.1.51/mailserver'; $rcmail_config['password_query'] = 'UPDATE mailserver.virtual_users SET password=ENCRYPT(%p,concat(_utf8\'$6$\',right(sha(rand()),8),_utf8\'$\')) WHERE email=%u LIMIT 1'; $rcmail_config['password_crypt_hash'] = 'sha512'; DB Error: [1142] UPDATE command denied to user 'mailuser'@'10.0.1.52' for table 'virtual_users' (SQL Query: UPDATE mailserver.virtual_users SET password=ENCRYPT('passwd',concat(_utf8'$6$',right(sha(rand()),8),_utf8'$')) WHEREemail='mail(a)example.com' LIMIT 1) in /var/www/program/lib/Roundcube/rcube_db.php on line 416 (POST /?_task=settings&_action=plugin.password-save?_task=&_action=) I am running RC 0.9.5 on Debian Wheezy (7.0) Machines with PHP 5.4, MySQL 5.5 and Apache 2.2. Cheers, S.

1 0

Picture Signature
by Saskia 08 Mar '14

08 Mar '14

Hi there, Im sure im not the only one but really...ive searched online for the last hour to understand how to add a picture to my signature and till cant find the answer anywhere. I've tried to link to a page i host which only contains the picture using the following code: <a href="http://www.project-33.com.au/logo.html">www.project-33.com.au</a> And i also tried: <img src="http://www.project-33.com.au/logo.html"> In both cases i first selected the html box and then pasted the code. All i see after i save this information and open a new email, is the exact text without formatting. I would really appreciate it if someone could help me out, i would love to have a more professional signature then just plain text. Thanks in advance! Saskia PS: I am using my personal email (saskiapoppema(a)gmail.com) because my hosting company needed to re-direct stuff (or something) and i cant receive emails for 48 hours on my business account.

2 2

please wait 12 seconds before sending this email
by Jim Pazarena 07 Mar '14

07 Mar '14

I am curious what settings would have generated this message when I was attempting to send an email?

2 1

Ticket #1488878: Per-folder settings for sort column/order and list columns
by Sandor Takacs 06 Mar '14

06 Mar '14

Hi all! I just made a plugin to do the per-folder sort function. The plugin works fine with the current git master and I think with the 1.0RC too. You can download it from github: https://github.com/Takika/rc_foldersort -- Takika

1 0

Re: [RCU] Release candidate for version 1.0
by Jim Pazarena 04 Mar '14

04 Mar '14

On 2014-01-31 06:08, Thomas Bruederli wrote: > Dear all, > > We just published the feature-complete release candidate for the > upcoming version 1.0. After adding some new features in 1.0-beta we > further cleaned up the code, fixed some more bugs and prepared > everything for the long awaited major release. Any idea when this RC may turn into a full release?

1 0

Persistent Login Plugin: Can't logout
by Florian Lindner 03 Mar '14

03 Mar '14

Hello, I'm using the persistent-login plugin: http://www.insanefactory.com/roundcube-persistent-login-plugin/ When I activate the remember feature at the login page I can't logout anymore. Pressing Log Out brings me back to the login form, but simply doing a reload or visiting roundcube at a later time automatically logs me in again. Is this bug known? Any workaround? Is AuthToken working better? I use the UserData cookie method, browser is Chromium on Linux. Thanks, Florian

3 2

(no subject)
by wale yale 27 Feb '14

27 Feb '14

user name info password

1 0

Change 'mail_domain' for some user profiles
by Igor Zinovik 27 Feb '14

27 Feb '14

Hello. Some of my mail users use 'mail.mydom.org' instead of 'mydom.org' for their domain part of email address, this happend due to incorrect value in 'mail_domain' variable. Is it possible some how to change value manually to 'mydom.org', e.g. with SQL statement?

1 0

MYSQL_ATTR_FOUND_ROWS
by ɹןʇnqן 24 Feb '14

24 Feb '14

# portmaster -l | egrep "(pdo|mysql|roundc)" ===>>> mysql51-client-5.1.73_1 ===>>> php55-mysql-5.5.9 ===>>> php55-pdo-5.5.9 ===>>> php55-pdo_mysql-5.5.9 ===>>> mysql51-server-5.1.73_1 ===>>> php55-mysqli-5.5.9 ===>>> php55-pdo_sqlite-5.5.9 ===>>> roundcube-0.9.5,1 When I try to load the roundcube page, I get these in the log. roundcube: PHP Fatal error: Undefined class constant 'MYSQL_ATTR_FOUND_ROWS' in /usr/local/www/roundcube/program/lib/Roundcube/rcube_db_mysql.php on line 134 Everything I can find on this error says to install pdo_mysql but I already have it installed, and mysql51 is greater than the required 4.0.8. Soooo.... (I had a similar problem in July with a different error, but that was solved with a strange session.auto_start in roundcube/.htaccess) I can access the mysql database with the round cube user (this was an existing working install, but the server has gone through a series of software updates. I suspect it was the installation of php55 that broke roundcube). -- ɹןʇnqן <mailto:lbutler@covisp.net> 303.219.0564

1 2

text edit options- diff. versions of RCube
by mhr＠wavepress.net 24 Feb '14

24 Feb '14

This is a text edit options Q: I use the CPanel version of RC, and have no experience with the DT client. I've been to the RC site and looked at the screen shots of various interface examples. With my host's CPanel version, if I'm in "compose" mode I have a button (small triangle) just to the left of the word "From", avail. to drop-down a really limited range of options, beginning with "Editor Type". But one of the s-shot examples on the RC site, where the user is in "compose", it shows a whole lot of other things available from the same spot, the same area-- all the things I want: changing the font, the font size, color of font, highlighting ability, etc., etc. Don't want to sound blasphemous, but I'd be happy with about 50% of the options you get in Gmail. In Settings there's an option to default to a specific font, but that's it. Thanks, Mark Rucker

2 1

Edit Headers
by Philip Rhoades 24 Feb '14

24 Feb '14

People, Is there a convenient way to edit headers (like in Thunderbird)? I need to put activity dates at the front of the Subjects so I can sort Meetup mails properly - I have written a little Ruby script to do this but it would be much nicer to be able to do it from within RCM and not have to manually delete dovecot files etc. I tried putting: edit_headers.php into the drivers dir but it appears that that is for spam management (?) and I couldn't see any changed I/F to access it. Is there any way to do what I want at the moment? (I am on v0.9.2 at the moment). Thanks, Phil. -- Philip Rhoades GPO Box 3411 Sydney NSW 2001 Australia E-mail: phil(a)pricom.com.au

1 0

RoundCube Not Loading
by Danny Roberts 24 Feb '14

24 Feb '14

I've installed Roundcube (v0.9.5-1) on CentOS 6.5. This was working fine until we made some extensive changes to our apache config. Now we have a situation where when I got to www.site.co.uk/webmail I simply get a directory listing of what is in /usr/share/roundcubemail instead of the login page I used to get. The new Apache config doesn't seem to have any obvious issues with it, everything else loads fine, there are no errors logged at all. Danny

2 1

Re: [RCU] RoundCube Not Loading
by Danny Roberts 23 Feb '14

23 Feb '14

On Monday 24 Feb 2014 00:47:16 Reindl Harald wrote: > Am 24.02.2014 00:40, schrieb Danny Roberts: > > I've installed Roundcube (v0.9.5-1) on CentOS 6.5. > > > > This was working fine until we made some extensive changes to our apache > > config. > > > > Now we have a situation where when I got to www.site.co.uk/webmail I > > simply > > get a directory listing of what is in /usr/share/roundcubemail instead of > > the login page I used to get. > > > > The new Apache config doesn't seem to have any obvious issues with it, > > everything else loads fine, there are no errors logged at all > > so you fucked up the Apache config > I did not, and nor do I think has the person that made the changes. As I said everything looks perfectly acceptable. > * DirectoryIndex directive > * php configuraton at all > PHP config has not been touched. DirectoryIndex was the first thing I checked and this appears to be fine. > > why do you make "extensive changes" without verify step by step > that the basic operations are working? Put a hold on the attitude, its is neither wanted nor in any way helpful. Unless you intend to help by giving some advice without being aggressive and insulting I suggest you stop replying to this thread.

1 0

AUTHENTICATE CRAM-MD5: A0001 NO login rejected
by Mr.Pine 23 Feb '14

23 Feb '14

Hi, I'm useing dbmail+postfix+roundcube and want to login via roundcube but got this error: ############### IMAP Error: Login failed foruser2(a)mymail.com from x.x.x.x. AUTHENTICATE CRAM-MD5: A0001 NO login rejected in /var/www/webmail/program/lib/Roundcube/rcube_imap.php on line 184 (POST /webmail/?_task=login&_action=login) ############## when I try to login via telnet I have no problem! ################### telnet mail.mymail.com imap Trying x.x.x.x... Connected to mail.mymail.com. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 AUTH=LOGIN AUTH=CRAM-MD5 STARTTLS ID] dbmail 3.0.2 ready. a1 LOGIN user2(a)mymail.com mypass a1 OK [CAPABILITY IMAP4rev1 ACL RIGHTS=texk NAMESPACE CHILDREN SORT QUOTA THREAD=ORDEREDSUBJECT UNSELECT IDLE ID] User user2(a)mymail.com authenticated ######### I set $rcmail_config['imap_auth_type'] = null; any help will be appreciated MrPine

1 0

Re: [RCU] fastcgi_cache & Roundcube
by Grant 22 Feb '14

22 Feb '14

>> Does nginx's fastcgi_cache work well with Roundcube? > > what has this to do with roundcube? fastcgi_cache has to be configured for each webapp. > how do you define "work well" Functionally. - Grant

1 0

fastcgi_cache & Roundcube
by Grant 21 Feb '14

21 Feb '14

Does nginx's fastcgi_cache work well with Roundcube? - Grant

1 0

Secure certain directories?
by Grant 21 Feb '14

21 Feb '14

Should I disallow access to certain roundcube directories in nginx? I'm especially concerned about arbitrary PHP execution in the user upload directory. - Grant

2 3

Xampp, hMailServer and Roundcube
by Cory Waltzer 21 Feb '14

21 Feb '14

Hello, I am a noob as far as webservers go and have been attempting to redirect webmail clients through Roundcube to https rather than http. Does anyone have any advice on how to accomplish this using XAMPP on hMailServer with Roundcube on a Windows machine? Thank you in advance! Cory Waltzer | Network Administrator | Hal Leonard | 507-474-9917 | <mailto:cwaltzer.halleonard@outlook.com> cwaltzer(a)halleonard.us

2 1

last login plugin
by Nick Edwards 21 Feb '14

21 Feb '14

does one exist? looking to show users where their last login came from, maybe even last failed login came from too I was doing this on squirrelmail five years ago, just decided to enable it here, but don't seem to be able to find one, surely I'm just having a blonde moment?

1 1

How to configure Password plugin with Roundcube and mail server on different systems?
by Paul Menzel 20 Feb '14

20 Feb '14

Dear Roundcube folks, having a system with a Postfix and Dovecot (using vmm [1]), a second system with Roundcube accessing that system and a third one with a PostgreSQL installation, I wonder how I need to configure the Password plugin [2]. I found a blog entry in German instructing how to do that [3], but it does not work for me as I configured Dovecot to use password type SSHA512. Setting `password_crypt_hash` to `sha512` I get an error, when actually trying to replace the old with the new password. PASSWORD_CRYPT_ERROR I also do not understand, why there are `password_dovecotpw` configurations options. Do I need to install these on the Web server running Roundcube? Thanks, Paul [1] http://vmm.localdomain.org/ [2] http://trac.roundcube.net/browser/github/plugins/password [3] http://www.finnchristiansen.de/2014/01/07/passwort-aendern-mit-roundcube-un…

2 1

Unable to log into Mailman member options with HTTPS
by Paul Menzel 20 Feb '14

20 Feb '14

Dear Roundcube folks, just a note, that I am unable to log into my member options in Mailman when I use HTTPS instead auf HTTP. After adding an exception for the certificate and entering the correct password I am getting an authentication failure. Thanks, Paul [1] https://lists.roundcube.net/mailman/options/users/

1 0

Attachments limit
by Jorge 19 Feb '14

19 Feb '14

Hi, Are there some limit in the number of attached files in one email that Roundcube can process without problem? I am experience some problem to view (preliminar view and open in a new window) emails that have more than 30 files attached. When I try to view, for example in preliminar view, appears the loading message and RC do not show the email and the loading message with loading animated image do not dissapear never. May be a problem with the quantity of attachments or another cause. TIA. Jorge Colaccni

1 0

upgrade guidelines
by Javier Colter 18 Feb '14

18 Feb '14

Hi guys, Please, don't kill me, I know. I need to upgrade a very old installation (0.4!) and wanted to know if you have any documentation that would help me as a guideline. Thanks!

2 4

upload size limit
by Grant 15 Feb '14

15 Feb '14

I've set main.cf in postfix, php.ini, and nginx.conf to an 8M file upload limit but Roundcube still states a 2M limit. Is there somewhere else I need to specify this? - Grant

3 6

Re: [RCU] upload size limit
by Grant 15 Feb '14

15 Feb '14

>> I've set main.cf in postfix, php.ini, and nginx.conf to an 8M file >> upload limit but Roundcube still states a 2M limit. Is there >> somewhere else I need to specify this? > > let me guess: you have raised "upload_max_filesize" but don't care > about "post_max_size" which is still 2M and since file uploads are > POST data that counts -> RTFM :-) I had changed that but something righted itself because Roundcube is reporting 8MB now. - Grant

1 0

Managesieve plugin not working with dovecot 1.2 anymore?
by Claudio Kuenzler 15 Feb '14

15 Feb '14

Hi Alec, I am testing 1.0-rc with, now, an hour old version from git. My goal is to upgrade an existing RC version, currently running 0.8.6 to 1.0 when 1.0 is officially released. The server is running Debian Squeeze (oldstable). It seems that the managesieve plugin doesn't work anymore with an older Dovecot version (1.2). Even when I set "managesieve_port" to "2200", the plugin doesn't load. The following errors are shown in error log: 14-Feb-2014 17:29:58 Europe/Zurich] Failed to read from socket (): 14-Feb-2014 17:29:58 +0100]: PHP Error: Unable to connect to managesieve on localhost:2200 in /var/www/roundcube-trunk-20140214/plugins/managesieve/lib/Roundcube/rcube_sieve ngine.php on line 188 (GET /?_task=settings&_action=plugin.managesieve) 14-Feb-2014 17:29:58 Europe/Zurich] Not currently in AUTHORISATION state (1): 14-Feb-2014 17:29:58 Europe/Zurich] Failed to read from socket (): 14-Feb-2014 17:30:46 Europe/Zurich] Failed to read from socket (): On the same server, the parallel installed version of 0.8.6 works fine. Any ideas? Did I misconfigure something, although there's not that much to configure in plugins/managesieve/config.inc.php? thanks, Claudio

2 2

Ticket #1487677 : Per folder option to check for new messages
by Sandor Takacs 14 Feb '14

14 Feb '14

Hi all! I just made a plugin to do the per-folder option to check for new messages. You can find here: https://github.com/Takika/rc_check_recent I think the plugin is compatible with 1.0-rc and current git too. -- Takika

2 1

RC 1.0-rc: Where's the "Move to...." select box
by Claudio Kuenzler 14 Feb '14

14 Feb '14

Hello all, Somebody knows where the "Select" drop-down menu went? You know, when a message was opened to read, the option "Move to..." to directly move the mail into a folder: <div class="toolbarselect"> <select name="mailboxlist" onchange="rcmail.command('moveto', this.options[this.selectedIndex].value)" class="mailboxlist decorated"><option value="">Move to...</option> I see that in 1.0-rc this option is now under "More" -> "Move to...", but the select menu is much smaller now. I searched through some of the recent mails in the mailing list for such a change but couldn't find anything (except "Re: [RCD] [Svn] [roundcube/roundcubemail] 9a0153: Implemented menu actions to copy/move messages, added folder-selector widget (#1484086)" maybe). It's clearly a convenience question, I know. If it's necessary to manually enable it somewhere, please let me know. thx

3 4

How to add a new font family in html signature
by Swagata Das 14 Feb '14

14 Feb '14

Hello all! I was wondering how do I add a new font family in html signature section? I am using 0.9.5 version. Actually I want to use my personal font for signature. Any idea how to do that?

2 1

Re: [RCU] Secure certain directories?
by Grant 13 Feb '14

13 Feb '14

>>>> Should I disallow access to certain roundcube directories in nginx? >>>> I'm especially concerned about arbitrary PHP execution in the user >>>> upload directory >>> >>> any directory containing user uploads has execution >>> disabled by definition >>> >>> Apache: >>> <IfModule mod_php5.c> >>> php_flag engine off >>> </IfModule> >>> >>> any directory only containing libraries and no directly >>> accessed files has access denied by definition >>> >>> that is completly independent of roundcube or whatever webserver >>> that are best practices in any case and not a question >>> >>> Apache: >>> <IfModule !mod_version.c> >>> Order deny,allow >>> Deny from all >>> </IfModule> >>> <IfModule mod_version.c> >>> <IfVersion < 2.4> >>> Order deny,allow >>> Deny from all >>> </IfVersion> >>> <IfVersion >= 2.4> >>> Require all denied >>> </IfVersion> >>> </IfModule> >> >> Are the default permissions you reference set via .htaccess files? > > it does not matter if you put them in .htaccess or <Directory>-directives > the final goal is the same and depends on your environment > > hence in my own applications they are deployed as part of packages > in .htaccess while with LocationMatch / Location for folders > like "upload" or "tmp" they are in global policies Ah, I misread that the first time around. It sounds like I need to be sure I disallow access and execution in certain directories. Which directories are those for roundcube? - Grant

2 1

Re: [RCU] Secure certain directories?
by Grant 13 Feb '14

13 Feb '14

>> Should I disallow access to certain roundcube directories in nginx? >> I'm especially concerned about arbitrary PHP execution in the user >> upload directory > > any directory containing user uploads has execution > disabled by definition > > Apache: > <IfModule mod_php5.c> > php_flag engine off > </IfModule> > > any directory only containing libraries and no directly > accessed files has access denied by definition > > that is completly independent of roundcube or whatever webserver > that are best practices in any case and not a question > > Apache: > <IfModule !mod_version.c> > Order deny,allow > Deny from all > </IfModule> > <IfModule mod_version.c> > <IfVersion < 2.4> > Order deny,allow > Deny from all > </IfVersion> > <IfVersion >= 2.4> > Require all denied > </IfVersion> > </IfModule> Are the default permissions you reference set via .htaccess files? - Grant

1 0

Forward Headers: In-Reply-To & References Headers
by Marcus Malcom 11 Feb '14

11 Feb '14

Hi all, RoundCube version: 0.9.1 I have a use case where I need to have the In-Reply-To & References header included for forwards. This is working just fine for replies, but not forwards. From my testing GMail does include these. Before I go creating a plugin, I wanted to see if this has been done before or if there is any support for it currently? Thank you, Marcus -- Marcus Malcom Mirth Corporation Senior Software Engineermarcusm(a)mirth.com 714-389-1319 -- CONFIDENTIALITY NOTICE: The information contained in this electronic transmission may be confidential. If you are not an intended recipient, be aware that any disclosure, copying, distribution or use of the information contained in this transmission is prohibited and may be unlawful. If you have received this transmission in error, please notify us by email reply and then erase it from your computer system.

2 3

Large inbox slow
by List 07 Feb '14

07 Feb '14

We are hosting a webmail service using roundcube 0.8.1 and a number of our users with inboxes in excess of 8000-10000 messages are experiencing extremely slow response times (We also downloaded a recent copy and it's just as slow). We are using Dovecot 2.1 as the IMAP server and have not had any issues with clients like outlook or Thunderbird, but as far as we understand it those clients keep a local copy of the messages for quick retrieval while Roundcube is doing everything over IMAP. Is there any thing we can do or should look at to improve the response times for loading an inbox with many thousands of messages?

5 6

Manage Sieve intercept facebook mail
by Davide Perini 03 Feb '14

03 Feb '14

Hi, is there a way to intercept the mail that sends facebook groups? I would like to move the mail sent from facebook groups to another folder, I would like to do it for certain mail address only. Facebook groups sends mail in a strange format and I cannot intercept the recipient email address using the manage sieve plugin. I cannot filter for "TO" because the TO is something like: To: "name of the facebook groups." <isOfTheGroups(a)groups.facebook.com> In the mail header I see that the mail of the recipient is specified in the*FOR* attribute: Received: from mx-out.facebook.com (outmail009.ash2.facebook.com [66.220.155.143]) by mail.mydomain.org (Postfix) with ESMTPS id C151B2C209 *for *<*myemail(a)mydomain.or*g>; Sun, 2 Feb 2014 21:04:00 +0100 (CET) Should I use that for the filter? If yes, how can I do it? Thanks.

1 0

List selection does not easily work
by Henning 01 Feb '14

01 Feb '14

Hi, in my new version of roundcubemail it is not easy to select list items. By single clicking list items, e.g. in folder managment, they do not get selected. You have do some little drag & dropping until it works. This is very annoying... Any clue on this? I'm running ubuntu with kolab-packages roundcubemail 1:1.0~dev20131031-1~kolab1.2 roundcubemail-plugins-kolab 1:3.1.7-0~kolab1 Henning

1 0

Integrating Roundcube login into WordPress page
by ɹןʇnqן 31 Jan '14

31 Jan '14

I have a text widget in WordPress that logs into squirrel mail and redirects the user to their inbox. I’ve been looking for a way to do with is RoundCube, but haven’t found anything so far. Wordpress and round cube are installed in separate folders, of course, but are currently on the same server. However, a solution that is not dependent on localhost would be best, of course. Has anyone done this? I don’t want to duplicate effort. And I don’t want this to be tied to Wordpress, really. I just want a widget to appear in the column with a login and password field someone can fill in, hit “login” and be taken to Roundcube. -- ɹןʇnqן

1 0

Release candidate for version 1.0
by Thomas Bruederli 31 Jan '14

31 Jan '14

Dear all, We just published the feature-complete release candidate for the upcoming version 1.0. After adding some new features in 1.0-beta we further cleaned up the code, fixed some more bugs and prepared everything for the long awaited major release. So we invite all early adopters to test this release candidate and report remaining bugs to our bug tracker. See the complete Changelog at http://trac.roundcube.net/wiki/Changelog and download the new packages from http://roundcube.net/download. Kind regards, Thomas P.S. Meet us in Brussels at FOSDEM this weekend. We have a stand in the K building.

1 0

filter features
by Hazel 27 Jan '14

27 Jan '14

Hello, all, I'm having some trouble using the filter settings. Firstly, I have a number of filter categories that nest inside one another (e.g. different destinations for subject contains "AB*" vs. subject contains "ABC*"), so the order of my filters is critical. Unfortunately, I can't find any way of editing/changing the order of my filters except by editing the sieve file, which I am enjoined not to do (I think it just breaks the GUI), or deleting and re-adding in the desired order. Does anyone know a better way? Secondly, is there any way to run a specific custom filter (or group of filters) on request rather than running it on receipt? Examples: "Right, I've read all the important bits from that mailing list, clear the lot out of my inbox and into its own folder", or just "I'm done with my inbox contents, now file it all". I used to use this facility a lot in KMail, and I found it really helped keep my inbox clear, and saved a surprising amount of time compared to manually filing each e-mail. I'm currently running searches and dragging the results. Sorry if this is a feature request, please feel free to tell me, constructively, where to put it. Regards,

3 2

Bugheader plugin
by Sandor Takacs 22 Jan '14

22 Jan '14

Hello! I just forked the original bugheader plugin (https://bitbucket.org/gerundt/roundcube-bugheader) to GitHub and I added GitHub Issues and Pulls to the displayed special headers. You can find the modified plugin at https://github.com/Takika/rc_bugheader . -- Takika

1 0

Re: [RCU] RC not replying properly to mailing list post.
by Ben Schmidt 21 Jan '14

21 Jan '14

On 16/01/14 7:59 AM, Reindl Harald wrote: > Am 15.01.2014 21:43, schrieb Ben Schmidt: >> Another is that sometimes people have direct copies delivered to >> their inbox, but copies via the list filtered into a folder. Such >> users want both copies. > > the opposite is true such users *do not* want both copies I am such a user, and I want both. It is true, though, that some users do not want both. Such users, though, set up their filters differently--any mail *including* the list address, not just delivered via the list, will go into the list's folder for those users. > the reason someone has sieve filters for lists is that he want > filter out list-traffic and not mix it with business email > which has a completly different priority in read Except if a list reply is directly relevant to him, in which case he hopes, or even asks, the list to explicitly CC him on any replies so they come to his inbox as higher priority mail. Actually, the user who wants these duplicate copies can make it work that way even if the MLM filters the mail, too, by copying any list mail explicitly addressed to them into their inbox. But either way, it relies on list users using Reply All so that he gets both the list copy and the direct copy. This requires the mail client to offer that feature, and it also requires the list users to have the culture of doing this, or responding to the user's request to do it. >> In Thunderbird, the "Reply All" button turns into a "Reply List" >> button when a mailing list is detected > > no, i have three buttons > > * reply > * reply-all > * reply-list > > guess why - because it are 3 different actions and reasons Screen shot attached for your examination. I don't know why it is different; maybe because my screen is smaller than yours, or because the platform is different. Ben.

4 10

RC vs reply-to
by Benny Pedersen 20 Jan '14

20 Jan '14

i will just start a new thread now and ask if there is a problem with roundcube not working with maillists like this one ? please dont reply if you dont use roundcube, if this would be a very long thread maybe we can get it fixed ?

6 10

How to debug the password plugin (sql/doveadm)?
by da-roundecubelist-19＠abelonline.de 18 Jan '14

18 Jan '14

I can't get the password plugin to work. When I enter the new password I only get the message "Could not save new password." I am using the sql driver with a postgresql db and the doveadm tool. The problem is that I can't find any explanation anywhere. I checked all logs in /var/log/roundcube/. I tried debug_level 1, 2, 4 and 8 and also password_log in the password plugin configuration. I also tried the SQL UPDATE manually and it works. Here are the relevant lines of /etc/roundcube/plugins/password/config.inc.php: $rcmail_config['password_driver'] = 'sql'; $rcmail_config['password_confirm_current'] = false; $rcmail_config['password_minimum_length'] = 4; $rcmail_config['password_require_nonalpha'] = false; $rcmail_config['password_log'] = true; $rcmail_config['password_db_dsn'] = 'pgsql://mailpasswordchanger:thepassword@localhost/mailserver'; $rcmail_config['password_query'] = 'UPDATE virtual_users SET password=\'%D\' WHERE local=\'%l\' AND domain=\'%d\';';; $rcmail_config['password_idn_ascii'] = false; $rcmail_config['password_dovecotpw'] = '/usr/local/sbin/dovecotpw'; $rcmail_config['password_dovecotpw_method'] = 'SHA512-CRYPT'; $rcmail_config['password_dovecotpw_with_method'] = true; It's a debian server with roundcube-0.7.2-9+deb7u1 and dovecot-2.1.7-7 Any idea where I could find some hints?

3 3

RC not replying properly to mailing list post.
by Kaz Kylheku 18 Jan '14

18 Jan '14

Hi All, Anyone had the following problem? When replying to a new mailing list posting with "reply all", the reply goes only To: the mailing list. Expected behavior: To: the person, Cc: to the mailing list. The message in question has no Reply-To: header or anything of the sort. The relevant headers are just: From: user(a)gmail.com To: mailinglist(a)example.com I'm a subscriber of the mailing list. I hit Reply All, and I get only one address: "mailinglist(a)example.com". Unless there is a Reply-To: header, the From: address must be one of the To: recipients!

6 15

Re: [RCU] RC not replying properly to mailing list post.
by Charles Marcus 18 Jan '14

18 Jan '14

On 2014-01-17 1:04 PM, Reindl Harald <h.reindl(a)thelounge.net> wrote: > Am 17.01.2014 18:58, schrieb Benny Pedersen: >> and RCU maillist now makes it impossible to reply private :( > really? look i did teh impossible! Really? You call replying to the OP, the list AND a 3rd party (me) 'private'?

3 5

Re: [RCU] RC not replying properly to mailing list post.
by Kaz Kylheku 17 Jan '14

17 Jan '14

On 17.01.2014 11:15, Reindl Harald wrote: > Am 17.01.2014 20:12, schrieb Kaz Kylheku: >> On 17.01.2014 10:10, Charles Marcus wrote: >>> On 2014-01-17 1:04 PM, Reindl Harald <h.reindl(a)thelounge.net> wrote: >>>> Am 17.01.2014 18:58, schrieb Benny Pedersen: >>>>> and RCU maillist now makes it impossible to reply private :( >>> >>>> really? look i did teh impossible! >>> >>> Really? You call replying to the OP, the list AND a 3rd party (me) >>> 'private'? >> >> Indeed, Reindl did not reply to the list, as claimed; or at least so >> I'm led to suspect, based on not having >> received the post you're replying to, keeping in mind that absence of >> evidence doesn't proves absence. (Perhaps >> there is a list posting, hitherto delayed as far as delivery to me.) >> >> Going with this hypothesis that there is no list posting, I'm guessing >> that Benny was on the To: and you were >> Cc:-d. Check the headers. >> >> However he did it, it was not done by using a simple Reply function, >> but by manual editing of the To: and Cc: > > correct - and that is far away from "impossible" > > there is no need to reply-all with a single click > there is no need to care about non-subscribers > there is no need to not reply only to the list and where you need it > you can do it manually > > period! There is no need for mail user agents; you can just telnet to port 25 of your upstream SMTP server, authenticate yourself (use a calculator if necessary for any challenge-response stuff). Then do your "mail to: ...", "rcpt from: ...", "data ..." and so on. Type the arbitrary headers you want and body, and off you go. Yes, a strict interpretation of a claim that something is "impossible" is obviously false.

1 0

need help configuring server to use managesieve plugin
by Steve Lindemann 17 Jan '14

17 Jan '14

when we click on "Filters" under "Settings" we get the message: "Unable to connect to server" (which makes perfect sense since it isn't listening (yet)). From what I've been able to find on configuring pigeonhole (sieve/managesieve) for dovecot I need to use either LDA or LMTP as the delivery agent. We use procmail as the mail delivery agent. Which brings me to my questions: Does anyone know a way to configure dovecot and roundcubemail to work with procmail and still be able to use the managesieve plugin for message filtering? If so, how? Or is there another option to do message filtering in roundcubemail that doesn't rely on installing pigeonhole for dovecot? What would that be? Or do I have to bite the bullet and stop using procmail? system summary: installed roundcubemail v0.9.5 using yum under centos 6.5 installed managesieve v6.2 from a tar ball using postfix for smtp using dovecot (w/pigeonhole) for pop/imap Thanks! -- Steve Lindemann, MSIS __ Network Administrator //\\ ASCII Ribbon Campaign Marmot Library Network \\// against HTML/RTF email, +1.970.242.3331 x116 //\\ vCards & M$ attachments http://www.marmot.org

2 1

RC does reply properly to mailing list post!
by Hartmut Steffin 17 Jan '14

17 Jan '14

I do not really understand what you discuss about, and this in such an emotional manner. It started about "Reply to Mailing list", but now you even fight about the "Reply" and "Reply all" buttons. This is ridiculous, as it is well defined and leaves NO ROOM for interpretation. http://tools.ietf.org/html/rfc5322#section-3.6.2 I repeat this in a short sentence each: Reply: You answer to "From" XOR "Reply-to", with Reply-to taking precedence. Reply all: Like reply, plus a copy to all (known) recipients of the original: To:, CC: (obviously not BCC:) So the creator of this thread got it wrong. NO BUTTON replies to the To: field, if it is overridden by the Reply-to: This is the sole purpose of the Reply-to field. If you answer to _this_ message, no matter how, I will receive my copy through the list, AND IN NO CASE directly! To do this, you had to add me to To: or CC: manually. This behaviour is WANTED by design of the RFC. ONLY IF I had put more addresses into the To or CC fields, you could make a difference with Reply or Reply all. Again this is WANTED by the RFC. To vary from this, would mean you create a mail client that violates RFC and works differently from ANY OTHER common sense program. It also is common practice for mail list programs, to put their address into the "Reply-to" field. Since decades I used literally hundreds of mailing-lists, and they actually all work the same. So again, this is not in your hands, thus not worth to fight about. Now let's have look at Reply-List. Because a "Reply to list" is NOT defined in a RFC, this is entirely up to the developers. They SHOULD just EXPLAIN what they really mean by it, so everybody KNOWS what happens beforehand. Everyone may make suggestions, this is an open world, though. And the developers will try to honour what they find feasible. My 2 cents In all programs I know of - that even have this button, a modern fashion - the Reply-List button honours the Reply-To field. Simple as that. I do not see a difference to Reply, and I cannot even imagine what else it should do, so I would agree to those who say this button is simply dispensable... But again, this may be my ignorance. It is entirely up to the developers to define AND DOCUMENT its behaviour. DOCUMENT your (mis-)feature properly, and everything is well. Close your ears to screaming and flaming. BUT AGAIN: DO NOT FIGHT OVER REPLY AND REPLY TO ALL. It is well defined and done correctly by RC! Cheers Hardy

3 4

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users