- Users - Roundcube mailing lists

problem with installation
by Markus Mobius 27 Sep '06

27 Sep '06

Hi, I followed all the instructions and was able to install Roundcube just fine. However, it does not let me login. I changed the config settings as follows: // the mail host chosen to perform the log-in // leave blank to show a textbox at login, give a list of hosts // to display a pulldown menu or set one host as string. // To use SSL connection, enter ssl://hostname:993 $rcmail_config['default_host'] = 'ssl://mail.fas.harvard.edu:993'; // TCP port used for IMAP connections $rcmail_config['default_port'] = 993; The error log shows the following problem: [26-Sep-2006 14:24:22 -0400] IMAP Error: Could not connect to ssl://mail.fas.harvard.edu at port 993: The operation completed successfully. in on line 0 I don't understand what this error message means. The database settings seem to all work. I tried logging in as username/password and also as username(a)fas.harvard.edu and password. I also tried another (secure) mail server and had the same problem. I suspect that it has something to do with the communication between Roundcube and the IMAP server - but the error message above was too cryptic for me to investigate any further. Any suggestions would be much appreciated. Best, Markus Mobius

2 1

Mail
by Leggatts Financial Services 25 Sep '06

25 Sep '06

Hi We have recently started using roundcube for our business email, through the cpanel used to set up our website. However, when we log in to check our emails, there is often a nimber in the panel on the left next to the inbox, indicating that we have new mail, but the only way to get the new mail into the inbox to read it is by clicking on refresh or inbox or cjeck mail a few times beofre it is there to be read. There is also often a long delay in messages actually coming into inbox, i.e. we had a couple sent on friday, but we only received them in our inbox this afternoon? DO you have any ideas why this may be? Thanks Cara -- Leggatts Financial Services Limited Kempfield Court Dingwall Ross-shire IV15 9RT Tel 01349 863356 Fax 01349 866977 Website - www.leggattsfs.co.uk Email - info(a)leggattsfs.co.uk "An appointed representative of The Whitechurch Network Limited which is authorised and regulated by the Financial Services Authority" -- Leggatts Financial Services Limited Kempfield Court Dingwall Ross-shire IV15 9RT Tel 01349 863356 Fax 01349 866977 Website - www.leggattsfs.co.uk Email - info(a)leggattsfs.co.uk "An appointed representative of The Whitechurch Network Limited which is authorised and regulated by the Financial Services Authority"

2 1

Rich Text Editor
by Nipun Jain 24 Sep '06

24 Sep '06

I would like to suggest that some other rich text editor be used in roundcune other than tinymce. Tinymce takes too much time to load and somehow doesnt go with the roundcune interface. Today I was browsing the osx86 forums (http://forum.insanelymac.com) and thought that the rich text editor used by them would go perfectly with roundcube. Any comments?

1 0

replacing the logo?
by Kenn Murrah 24 Sep '06

24 Sep '06

Pardon the elementary question, but is it permissible to replace the RoundCube logo with a company logo? I'm not sure how the license views this, and I don't want to do inadvertently violate the license. thanks.

2 1

BiG BuG !!!
by yepla 24 Sep '06

24 Sep '06

hello, sorry for my english but ... there are a big error when i send a mail from webmaster(a)alloocash.com to webmaster(a)alloocash.com the mail go in yepla(a)alloocash.com and when i send a mail from yepla(a)alloocash.com to webmaster(a)alloocash.com the mail go to yepla(a)alloocash.com ! :( i don't understand i have 2 home different yepla : /home/mail/yepla/ with Maildir webmaster : /home/mail/webmaster with Maildir i use postfix and courier-imap-ssl i have 4 users which use roundcubewebmail and the bug is only on this 2 adress plz help thx Yepla

2 1

How to allow users to change thier password
by abhishek 24 Sep '06

24 Sep '06

Hi All I am using roundcubemail as webmail and its working fine, but i want to allow users to change thier password, i am using linux machine and authentication method is /etc/shadow file , so plz help me how i can allow users to change thier password via roundcubemail. thanks regrads Abhishek -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 2

debian/postfix/courier issues?
by Kenn Murrah 23 Sep '06

23 Sep '06

just discovered this extraordinary looking application ! i currently have a debian server running postfix and courier-imap and using mysql as user database ... are there any issues i'll encounter with this installation? anything special i need to know before attempting the installation? do i need to uninstall sqwebmail first? Any help would be greatly appreciated -- i'm foolish enough to attempt this install on a production server and can't afford to mess up anything :-) thanks in advance for the help. kenn

2 1

GPG/PGP
by --[UxBoD]-- 23 Sep '06

23 Sep '06

Would it be possible to be able to add a individuals key, and then encode the message when the Send button is pressed ? TIA --[ UxBoD ]-- // PGP Key: "curl -s http://www.splatnix.net/uxbod.asc | gpg --import" // Fingerprint: 543A E778 7F2D 98F1 3E50 9C1F F190 93E0 E8E8 0CF8 // Keyserver: www.keyserver.net Key-ID: 0xE8E80CF8 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

1 0

Multiple Domains
by Jim Douglas 23 Sep '06

23 Sep '06

I am evaluating RoundCube and SquirrelMail I would like some feedback on both before installing... RoundCube supports multiple domains... Is it possible to set a parameter so a user can have their domain filled in when navigating to the login screen from their domain? Are there any bugs that may be showstoppers. Someone mention a major issuse with IMAP sort. Thanks, Jim

2 1

Subscribing to shared IMAP folders
by James Galvin 21 Sep '06

21 Sep '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I have just switched to Round Cube from IlohaMail, but I cannot see how to subscribe to shared IMAP mailboxes. I searched the documentation and forums, etc., but could only find one similar post in the archives (http://lists.roundcube.net/mail-archive/roundcube.users/2006/04/22/) to which there was no reply. The only folders that I can subscribe to are those which belong to my own user account, even though Cyrus IMAP has given me permissions to access other mailboxes. In IlohaMail, these shared mailboxes appeared under a +user tab, and I can also subscribe to them in Thunderbird and Outlook. Please let me know if I am missing something obvious, or if this is not supported by Round Cube, since this is a requirement on our network. Thanks, James -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFErmLG2ru+aWjSgcRAoSWAJ4jpwA7ad6TVrBD2UEm6nuQtXwiXgCeIYZW G98V1s3cV9Z9hxFlEcZ3hVM= =V/AE -----END PGP SIGNATURE-----

1 0

Can't delete messages
by Albert Czarnecki 21 Sep '06

21 Sep '06

Hi I have RC from SVN (version 348) and I can't delete message with attachment which have 9,5MB In php.ini memory_limit is a 32MB size Anyone have same problem? Albert

1 0

Re: login aliases
by Thomas Bruederli 20 Sep '06

20 Sep '06

The users table in the RoundCube database has a separate col for login aliases. Unfortunately there's not UI to fill it in, you have to set it manually using your favorite database admin tool. In case you have specified a virtuser file in your config ($rcmail_config['virtuser_file']) the e-mail address will be looked up on the first login (with your cryptic user name) and will then be added automatically to the alias col. Virtuser files are text files that have an email -> username pair on each line. Regards, Thomas P.S. This is more a question to the users mailing list rather than the developers list. jan t. sott wrote: > some webhosters use logins different than the email addresses. therefor > it would be useful to specify login aliases, as email addresses are > easier to remember than randomly generated accounts ids. could this be > added to the user settings? i want to login with email(a)myhost.com > instead of 3463246 >

1 0

Revision 346
by Nipun Jain 16 Sep '06

16 Sep '06

I am currently testing revision 346 and found these bugs: 1. Spell check doesn't work with html messages. It is greyed out (disabled) when in main.inc.php, the value is set to true for enable spellcheck. 2. If enable spell check is set to false, the spell check icon, though faded out still appears on the compose screen, whereas setting enable spellcheck as false should completely remove this icon. 3. On the save identity page, if HTML signature is clicked, the Rich Text Area that opens up is hardly visible, its background and border being the same color as the rest of the page. One has to assume that this area is meant to write your signature and once you write in it, only then a scroll bar appears which makes it somewhat separate from the rest of the form. 4. In Internet Explorer 6, when a HTML message is composed, the signatures are not inserted into the message automatically. There is no such problem is Firefox 1.5 5. In Firefox 1.5, clicking on some of the TinyMCE icons such as smilies opens up a pop up window, which cannot be re sized and whose content don't fit into the screen that has opened. There is no way to scroll and hence the content is cut. In case of smilies, I can only see one column of smilies. There is no such problem in Internet Explorer 6. These are the bugs which I found out in my initial testing of revision 346 of the RoundCube SVN. I will post more if I find any. The developers are requested to see if they can reproduce these errors and if they can, try to fix them in future revisions. Regards, Nipun Jain.

1 0

cPanle Quota Problem
by Nipun Jain 15 Sep '06

15 Sep '06

I am unable to get quotas to work with cPanel. The Disk Usage always says unknown or unlimited but is not able to tell the exact usage out of the given space alloted. Is there any way I can fix it? I think there are a lot of us using cPanel and we all would like quota's to work. Regards, Nipun Jain.

1 0

Sending mail problem
by Przemyslaw Gawronski 13 Sep '06

13 Sep '06

Hi, I've setup roundcube beta2 on serwer (fedora core 4) with: - postfix - cyrus-imapd - mysql I can send with no problem from thunderbird, but from roundcube I can only login and view mail on the server, but can't send any :-( My output from smtp server: ---- Sep 11 08:44:36 papa postfix/smtpd[2130]: connect from papa[127.0.0.1] Sep 11 08:44:36 papa postfix/smtpd[2130]: warning: SASL authentication failure: no secret in database Sep 11 08:44:36 papa postfix/smtpd[2130]: warning: papa[127.0.0.1]: SASL DIGEST-MD5 authentication failed Sep 11 08:44:36 papa postfix/smtpd[2130]: disconnect from papa[127.0.0.1] ---- My roundcube main.inc.php: ---- // use this host for sending mails. // to use SSL connection, set ssl://smtp.host.com // if left blank, the PHP mail() function is used $rcmail_config['smtp_server'] = 'localhost'; // SMTP port (default is 25; 465 for SSL) $rcmail_config['smtp_port'] = 25; // SMTP username (if required) if you use %u as the username RoundCube // will use the current username for login $rcmail_config['smtp_user'] = '%u'; // SMTP password (if required) if you use %p as the password RoundCube // will use the current user's password for login $rcmail_config['smtp_pass'] = '%p'; // SMTP AUTH type (DIGEST-MD5, CRAM-MD5, LOGIN, PLAIN or empty to use // best server supported one) $rcmail_config['smtp_auth_type'] = ''; // Log sent messages $rcmail_config['smtp_log'] = TRUE; Thanks for suggestions. Przemek -- AIKIDO TANREN DOJO - Poland - Warsaw - Mokotow - Ursynow - Natolin info: http://www.tanren.pl/ phone: +48501516666 email: dojo(a)tanren.pl

2 1

roundcube beta2 and attachment problem
by Albert Czarnecki 13 Sep '06

13 Sep '06

Hi I use RC beta2 and I have problem with attachment , when friend send me e-mail which have 9MB size attachment I can't delete them, if I try delete them RC logout me Regards, Albert

2 1

Login from a Seperate Page
by Mike Laiosa 12 Sep '06

12 Sep '06

For a variety of reasons, I'd like to create my own login page. I have found experimentally that it is insufficient to just duplicate the Form tag from the Round Cube login page on my own page as shown below. It seems to be realted to cookies, as it takes me back to the Round Cube login page and flashes an error saying my browser doesn't accept cookies. Does anybody know if what I want to do possible? <form action="http://host/roundcubemail/" method="port"> <input type="text" name="_user"> <input type="password" name="_pass"> <input type="hidden" name="_action" value="login"> </form>

2 1

Remove Junk folder
by Rene van den Berg 11 Sep '06

11 Sep '06

Hi all, Installed RC last week and it looks very promissing :-) Currently I'm ussing a heavely modified Squirrelmail setup but would like to easely upgrade and not have to add all the plugins all the time. There is a junkmail folder automaticly created when logging on, I don't use this folder as all 'Junk' messages are placed in the Spam folder. From the folders menu I can't unsubscribe this Junk folder. Second issue I have with this is that in some translations the Junk folder is renamed in Spam which is confusing as I then have two folders with the same name. Keep up the good work !!

2 2

S/MIME and email client certificates
by Rene van den Berg 09 Sep '06

09 Sep '06

Are there any plans to support S/MIME and email client certificates?

1 0

Identities Tab
by Armindo Silva 31 Aug '06

31 Aug '06

Hi! Is there a simple way to disable identities tab? I don´t want all my users to be able to send mails from any account.. Cumps Armindo Silva -- -- "The only way of discovering the limits of the possible is to venture a little way past them into the impossible." Sir Arthur C. Clarke

1 0

forward as attach, auto show new folders and more
by Daniel Mota Leite 31 Aug '06

31 Aug '06

Hi all i install roundcube to work as a quarantine interface for our global virus and spam folders, but i have some specific problems about this: - i need to forward the emails as attach for the bayes filter, forward inline doesnt work as its needed... Is there way to change the forward behavior (one option, patch, other solution) or does require a big rewrite? note that i dont need to write anything to the forward message, other than the TO:, so a hack like "echo | mutt -a $email_file $to" could be enough... -i archive the last day quarantine to a folder date, but roundcube requires me to every day add that new folder, is any option to tell roundcube to auto select all available folders everytime? -i also need to "release" some spam from that quarantine, so i would need to forward the email with the "email from" to the "email to"... the sendmail command would be something like this: sendmail -f $from $to < $email_file probably with the forward as attach, this could probably be hacked easily i would do that, but i have limited php knowledge and dont know where to change all this... at least i was able to put the search box searching for TO, CC, Subject, From, but that was too easy 8) finally, i'm having problems using imaps, using plain imap all works fine, but with imaps i always get wrong authentication (the imap server is working fine, i can connect with a email client with via plain imap and via ssl) thanks in advance for any help higuita -- Naturally the common people don't want war... but after all it is the leaders of a country who determine the policy, and it is always a simple matter to drag the people along, whether it is a democracy, or a fascist dictatorship, or a parliament, or a communist dictatorship. Voice or no voice, the people can always be brought to the bidding of the leaders. That is easy. All you have to do is tell them they are being attacked, and denounce the pacifists for lack of patriotism and exposing the country to danger. It works the same in every country. -- Hermann Goering, Nazi and war criminal, 1883-1946

1 0

Issues with Spellchecker
by dominic.ryan＠it-hq.org 17 Aug '06

17 Aug '06

Hi All, Using beta2 and am having an issue with the spellcheck feature. I have enabled both the OpenSSL and Sockets extensions in IIS 6, and have verified with phpinfo(); that they are loaded. However I still seem to be getting these PHP Warning messages which according to the RoundCube FAQ would indicate that I don't have these extensions enabled; PHP Warning: fsockopen(): no SSL support in this build in X:\roundcubemail\program\steps\mail\spell.inc on line 34 PHP Warning: fsockopen(): unable to connect to www.google.com:443 in X:\roundcubemail\program\steps\mail\spell.inc on line 34 Are there any other PHP settings that could be preventing the RoundCube spellchecker from working?

1 0

beta2 unusable for me
by Moritz 17 Aug '06

17 Aug '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi list, I totally love roundcube and was amazed how stable and usable it already was in such an early development state. Beta1 was the first version I installed. Today I wanted to upgrade to beta2 but went back to beta1 because of this: When I login I see the mail in my Inbox, but when I click on another folder I don't see any mail and even when I go to the Inbox again I don't see my mail anymore. I have to click on the "mail" symbol to see my mail again. Another issue I experienced was that the search box was somewhat behind the roundcube logo what rendered it more or less unusable, but that wouldn't have prevented me from using beta2. I upgraded my installation in two ways: 1) following the instructions from the UPGRADING and 2) replacing the whole roundcube folder with beta2 and editing the config files again. The issues occurred either way. The only thing I didn't touch was the database, but the database structure didn't change from beta1 to beta2, did it? I just wanted to let you know about this. If you need more information for fixing this or whatever, please let me know. So far I will stick to beta1 and hope that the next release will be less buggy. Regards, - -- Moritz mo(a)agrav.org | mo.agrav.org | luna.agrav.org/~mo Get my GPG key fingerprint here: https://luna.agrav.org/~mo/gpg/ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFE5EAowR2rA+A/LU4RAnJ0AKCDpJU0QZXBxceHvNLVuba7O1isagCfcXN7 mnO0ho/9Acho+fWIZ1bpye4= =/RHJ -----END PGP SIGNATURE-----

3 3

Can't select several contacts
by Alexis Domjan 14 Aug '06

14 Aug '06

Hello, Since I updated roundcube to the latest version through svn, one of our user reported that now we can't select several contacts from the Address Book and then click on "Send message to". However this was possible in a previous version, and, indeed, I confirm that this was possible before. The new version where the several contact choice doens't work is: $Id: index.php 297 2006-08-06 15:55:11Z thomasb $ The older version where it works is (from CVS snapshot) $Id: index.php,v 1.36 2006/03/23 22:32:30 roundcube Exp $ Additionaly, our users also asked if it would be possible to add recipients directly from the mail writting part, for example by clicking on the "To:". Thanks in advance for your help. -- Horus Networks Sàrl http://www.horus.ch Responsable technique Alexis Domjan <adomjan(a)horus.ch>

1 0

0.1-beta2 patch for cPanel installations
by Thomas Bruederli 14 Aug '06

14 Aug '06

There's a new patch available to install RoundCube 0.1-beta2 on a cPanel host. The installation guide can be found at hostgeekz.com: http://www.hostgeekz.com/guides/cPanel/64/Install_RoundCube_on_cPanel.htm Have fun!

1 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users