- Users - Roundcube mailing lists

[RoundCube Users] Patches for 0.1-beta
by Thomas Bruederli 22 Feb '06

22 Feb '06

The recently published beta release came up with two ugly bugs. One prevented from saving the language selection in the user preferences and the other completely omitted mail headers when having no smtp server configured. User Preference Language defaults to English: http://sourceforge.net/tracker/index.php?func=detail&aid=1435989&group_id=1… Sending mails as Nobody/Attachments are not sent: http://sourceforge.net/tracker/index.php?func=detail&aid=1434778&group_id=1… Sorry for that! Thomas

1 0

[RoundCube Users] email attachement
by Alexandre Chapellon 22 Feb '06

22 Feb '06

Hello all of you. I have notice something weared I would like to share with you. I have installed a postfix server doing antispam and antivirus content filter (using spamassassin & content_filter and clamav&clamsmtpd) Everything is ok except when I'm writing an email from roundcube webmail I tested writing an email attaching the eicar virus test file and when I send it the email scanner says there is no virus in the message! I did the same test with 2 others webmail and the virus has been discovred by clamd! Do you have any clues?

2 1

[RoundCube Users] getting around escaped " and '
by Brady J. Frey 22 Feb '06

22 Feb '06

Typically a PHP thing, I didn't expect it in roundcube (though, yes, it's php) -- how to I make it so my users email inbound and outbound don't escape out the quotes? For example, users who type in "Chicken's the best" send and receive \"Chicken\'s the best\" How do I make it so it does not do that? I haven't updated to beta yet, I was waiting for the issues to smooth over until I ran that route, but I'm on the most recent cvs before then. -- *Brady J. Frey* creative director // *dotfive* 1960 California St., Suite #23 San Francisco, CA 94109 *ph:* 415.354.1076 www.dotfive.com <http://www.dotfive.com>

4 4

[RoundCube Users] headers
by Greg Hetrick 22 Feb '06

22 Feb '06

I have an install of the beta up and running, I have dug through the archive and found posts that suggested corrections to a problem with headers not being hidden. I have tried doing a str_replace in the sendmail.inc file for the headers. Also have set it up to run off a postfix/SMTP install. The problem now is that the message comes through as user "Apache" which is the default user that runs the web service. The eariler post suggests that if I just have it running through a postfix install it should correct both problems, any thoughts? $header_str = str_replace("\r",'',$MAIL_MIME->txtHeaders($send_headers)); was able to clear the below headers. -------------------------------------------------------------------------------------------------------------------------- Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit Message-Id: <20060220083809.CA30762AE7(a)test.testing.org<20060220083809.CA30762AE7(a)kahlua.minderaser.org> > Date: Mon, 20 Feb 2006 02:38:09 -0600 (CST) From: ghetrick(a)testing.org <ghetrick(a)minderaser.org> (Apache) ---------------------------------------------------------------------------------------------------------------------------

5 12

Re: [RoundCube Users] IMAP SSL Using wrong port?
by Brett Patterson 22 Feb '06

22 Feb '06

Well, not sure what got it working, but I've been playing with it for a while, and it seems to be working now. I think it was me not having the SSL extension loaded in php (woops, missed during install). So all is well now. Thanks for the offer though. And yes, the server is on a separate host. But it works, so this can be "resolved". ~Brett Geoffrey McCaleb wrote: > Thats odd, I'm using port 993 on my local server with no problem, however I'm not using SSL. Is the mail server on a seperate host? > > Geoffrey > > On Wed, 22 Feb 2006 08:44:32 -0500, Brett Patterson <b.a.patterson(a)gmail.com> wrote: > >> Hi all. I'm trying to test-out roundcube on my local server. I've set >> everything up and got it running splendidly. I'm just having a problem >> with it. >> >> 1.) It doesn't use my port that I specified during connections. In the >> config file I've got: >> $rcmail_config['default_port'] = 993; >> That says to me that the default port to talk to the client on would be >> 993 (SSL). I've also specified my server to be >> "ssl://imap.server.com:993" and yet it won't connect. Keeps giving me >> this exact error: >> *IMAP Error:* Could not connect to Imap Server at port 143: >> >> I'd also like to suggest adding a line in the INSTALL file that tells >> new users to rename main.inc.php.dist and db.inc.php.dist to just >> *.inc.php. I didn't get that, took me a bit to figure it out... >> >> Love the program, hope to see more in the future. Any help would be >> greatly appreciated!! >> >> ~Brett >> > > >

1 0

[RoundCube Users] Flush the cache?
by Julian Field 22 Feb '06

22 Feb '06

-----BEGIN PGP SIGNED MESSAGE----- What is the best way of flushing the cache when using MySQL? I have a problem with messages not appearing in the inbox contents list. If I switch off "enable_caching" then everything works perfectly. So I am guessing it is the cache. I am running the latest beta release of Roundcube on RHEL4, talking to a Cyrus imap server. Thanks folks! - -- Julian Field jkf(a)ecs.soton.ac.uk Teaching Systems Manager Electronics & Computer Science University of Southampton SO17 1BJ, UK -----BEGIN PGP SIGNATURE----- Version: PGP Desktop 9.0.5 (Build 5050) iQEVAwUBQ/x99fw32o+k+q+hAQGJoAf/ddnb5QHhLSpw6XaKYdyMb+/gUGbkygua EggqU0CCin+gbfDo8CWROTVwv8tO+BCu4nG4OpsE8wqBFU3kLpLXDm6LVGRJgfCv sKpkUsYgayZRODv5TbUOORsoGKjY0BVL1tu4GUUSVeNoz5ymfmTUsPKGh2pbXIP/ lIwucIb4uZpwZYIrQlwJ6ZGILc+qYi9VpCs6kWC3pb4na0Uz5GsLPoYGQXLh5zXl RIaYcnDrGUy3j7vbG5WcqWtGNtSB0Gk5JXST5hVwmb+x0kjPYHT8a2t7jl2ytw4C AhWhrdury602NSPrM+8FZcgOQ6ltDD5fAVrmWH2stCjz+t/5XZwtbg== =GZHP -----END PGP SIGNATURE----- -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

1 0

Default mail server address.
by Lic. Martin Marques 22 Feb '06

22 Feb '06

In my RC server I happen to see that if the user hasn't set up his identities, when composing he gets a user(a)local.network where local.network is our local (private network) SMTP server. I'm sure yet if it's trying to get the value from the 'smtp_server' field or the 'default_host' (this is the imap configuration host). Is there a way to configure this apropriatly? -- 21:50:04 up 2 days, 9:07, 0 users, load average: 0.92, 0.37, 0.18 --------------------------------------------------------- Lic. Martín Marqués | SELECT 'mmarques' || Centro de Telemática | '@' || 'unl.edu.ar'; Universidad Nacional | DBA, Programador, del Litoral | Administrador ---------------------------------------------------------

1 0

[RoundCube Users] actions for multiple messages?
by Roman v. Gemmeren 22 Feb '06

22 Feb '06

hi all, i just gave roundcube another shot on my old P3-450 server and am amazed.;) Last time i checked it wouldn't show any other folders than Inbox (running cyrus with unixhierachy). But now that works like a charm. And it performs very well on that poor loaded machine, might be even better than ilohamail. Thx for that. After some testing i got a few suggestions: 1.I think it would be quite comfortable to have the "new message"-button also present when actually viewing a message. Or even better, having an completely editable menu-bar? 2.Actions for multiple messages (like moving 10 message to a different folder, marking them read/imporant...) 3.The abillity to sort the folders as i like (e.g. the important ones at the top..) 4.reading a signature from a file on the server (i have mine in ~/fortunesig) Thats all i could think of now, great work so far! Greetings, Roman v. Gemmeren -- This could be a fortune-sig read from file ;)

2 1

Editable Message-Menu?
by strowi 22 Feb '06

22 Feb '06

hi all, i just gave roundcube another shot on my old P3-450 server and am amazed.;) Last time i checked it wouldn't show any other folders than Inbox (running cyrus with unixhierachy). But now that works like a charm. And it performs very well on that poor loaded machine, might be even better than ilohamail. Thx for that. After some testing, i would find it quite comfortable to have the "new message"-button also present when actually viewing a message. Or even better, having an completely editable menu-bar?

1 0

[RoundCube Users] from address display problem
by cynic＠elitistbastard.com 22 Feb '06

22 Feb '06

I have a from address configured in personal preferences. However, what shows up in sent mail as the user name is the info from the passwd file for the user that apache is running as. Thus, the address is correct, but the name is wrong. Any ideas on what could be causing this? I won\'t have time to dig into the code til saturday afternoon.

3 2

Re: [RoundCube Users] New items not appearing after login
by Mark Pallo 21 Feb '06

21 Feb '06

As a wild guess I changed the value below from TRUE to FALSE in main.inc.php as a test. Now my inbox updates immediately and new items now appear after login so the issues seems fixed. I guess my IMAP server does run on the same machine. // enable caching of messages and mailbox data in the local database. // this is recommended if the IMAP server does not run on the same machine $rcmail_config['enable_caching'] = TRUE; Mark Pallo wrote: > I am having an issue I did not notice last night. Today at work when > I logged in my existing items are in my inbox, however I have no new > messages displayed. When I login I briefly see the number of > messages next to "Inbox" on the left (18) flash and then it will > disappear. I have to click on Email in the upper right toolbar > and/or click on Inbox again for them to appear. > > Any ideas? > >

1 0

[RoundCube Users] Quota problem
by Mykeul 21 Feb '06

21 Feb '06

Hi there, I use CVS Roundcube, and I try to get the quota working. I check in the source code, and saw that the "disk usage" in rc is calculated from the imap command QUOT1 GETQUOTA ROOT "INBOX" (I know QUOT1 is only the way to recognize response). The problem is that when I ask this to my courier-imap server, it does NOT reply something RC expects. I know it is not a rc problem, but I ask on a courier-imap newsgroup and nobody awnsers. Could you help me please ? I'm sure it is a simple problem for someone who knows well imap. The message I posted on the NG, with technical info is juste below. Thanks a lot, Mykeul I set up a courier-imap server with a mysql authentication. Everything > works well, but the quotas are not. > > Here's my authmysqlrc : > > MYSQL_SERVER localhost > MYSQL_USERNAME mail > MYSQL_PASSWORD password > MYSQL_PORT 3306 > MYSQL_OPT 0 > MYSQL_DATABASE mail > MYSQL_USER_TABLE users > MYSQL_CLEAR_PWFIELD clear > MYSQL_UID_FIELD uid > MYSQL_GID_FIELD gid > MYSQL_LOGIN_FIELD id > MYSQL_HOME_FIELD home > MYSQL_NAME_FIELD name > MYSQL_MAILDIR_FIELD maildir > MYSQL_QUOTA_FIELD quota > > and here is my mysql db : > > CREATE TABLE `users` ( > `id` char(128) NOT NULL default '', > `crypt` char(128) NOT NULL default '', > `clear` char(128) NOT NULL default '', > `name` char(128) NOT NULL default '', > `uid` int(10) unsigned NOT NULL default '65534', > `gid` int(10) unsigned NOT NULL default '65534', > `home` char(255) NOT NULL default '', > `maildir` char(255) NOT NULL default '', > `quota` char(255) NOT NULL default '', > KEY `id` (`id`) > ) ENGINE=MyISAM DEFAULT CHARSET=latin1; > > INSERT INTO `users` VALUES ('test(a)test.local', '', 'test', 'Test', 8, > 8, '/backup/mail/boxes/test', '/backup/mail/boxes/test/Maildir/', > '1000000S'); > > When I telnet my 143 port and ask for the quota, I get this : > debianetch~ telnet localhost 143 > Trying 127.0.0.1... > Connected to localhost.localdomain. > Escape character is '^]'. > * OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE > THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION] > Courier-IMAP ready. Copyright 1998-2004 Double Precision, Inc. See > COPYING for distribution information. > A login test(a)test.local test > A OK LOGIN Ok. > B GETQUOTAROOT "INBOX" > * QUOTAROOT "INBOX" "ROOT" > * QUOTA "ROOT" > B OK GETQUOTAROOT Ok. > > The line > * QUOTAROOT "INBOX" "ROOT" > * QUOTA "ROOT" > is not what my webmail expects, it should be something like > * QUOTAROOT INBOX user/test > * QUOTA user/test (STORAGE 654 9765) > > I have been browse dozens of Google pages but I dont find anything > relevant about this problem. > Could you help me ? > > Thanks, > > Mykeul >

4 6

[RoundCube Users] installation help
by rt.net2＠verizon.net 21 Feb '06

21 Feb '06

Hello, I am currently receiving the following error when I try to log in for the first time. [20-Feb-2006 00:44:59 -0500] IMAP Error: Authentication failed (LOGIN):<br>"a001 NO LOGIN failed" in on line 0 I am guessing it is due to the fact that I have no clue what I should be entering for the following config options. I really have no idea what they do exactly. // Path to a virtuser table file to resolve user names and e-mail addresses $rcmail_config['virtuser_file'] = ''; // Query to resolve user names and e-mail addresses from the database // %u will be replaced with the current username for login. // The query should select the user's e-mail address as first col $rcmail_config['virtuser_query'] = ''; Any help would be appreciated. Thanks

2 1

Roundcube on windows
by Daminto Lie 21 Feb '06

21 Feb '06

Hi, I like to use the roundcube as a webmail client. However, since my mailserver runs on windows XP, hence just wonder if roundcube can also be run on windows OS. Thank you in advance and look forward to hearing from you Daminto --------------------------------- Do you Yahoo!? Yahoo! Health: Dedicated to providing current health news and information.

1 0

RoundCube Webmail Japanese site.
by Tadashi Jokagi 21 Feb '06

21 Feb '06

Hi, I started the Japanese information site for RoundCube. Please see those interested: http://oss.poyo.jp/roundcube-ja/ -- ----+----1----+----2----+----3----+----4----+----5----+----6----+----7 Tadashi Jokagi mailto:elf2000@users.sourceforge.net Jabber:elf@jabber.jp mailto:elf2000@users.sourceforge.net Yokukitana II http://elf.no-ip.org/ blog>http://blog.poyo.jp/ wiki>http://wiki.poyo.jp/ Serendipity Japanese http://oss.poyo.jp/s9y-ja/ Jaws Japanese http://oss.poyo.jp/jaws-ja/

1 0

[RoundCube Users] R: Problems with DBMail
by Andrea Brancatelli 20 Feb '06

20 Feb '06

Hello everybody... I seem to have understand where the problem is laying... I suddenly realized that I should take a look at RoundCube's error log, so here it is: [10-Feb-2006 00:39:28] PHP Fatal error: Maximum execution time of 120 seconds exceeded in /usr/local/share/RoundCube/program/lib/imap.inc on line 121 [10-Feb-2006 00:42:25] PHP Fatal error: Maximum execution time of 120 seconds exceeded in /usr/local/share/RoundCube/program/lib/imap.inc on line 123 [10-Feb-2006 00:42:31] PHP Fatal error: Maximum execution time of 120 seconds exceeded in /usr/local/share/RoundCube/program/lib/imap.inc on line 123 [10-Feb-2006 02:42:53] PHP Fatal error: Maximum execution time of 120 seconds exceeded in /usr/local/share/RoundCube/program/lib/imap.inc on line 121 [10-Feb-2006 02:45:32] PHP Fatal error: Maximum execution time of 120 seconds exceeded in /usr/local/share/RoundCube/program/lib/imap.inc on line 121 [10-Feb-2006 02:45:36] PHP Fatal error: Maximum execution time of 120 seconds exceeded in /usr/local/share/RoundCube/program/lib/imap.inc on line 121 I have hundreds of this and they mostly coincide with my server's CPU being at 100%. Line 121 - 123 of program/lib/imap.inc are the following: function iil_ReadLine($fp, $size){ $line=""; if ($fp){ do{ $buffer = fgets($fp, 2048); $line.=$buffer; }while($buffer[strlen($buffer)-1]!="\n"); } return $line; } (121 is the fgets) So the problem seems like RoundCube gets stuck in an infinite loop, sometime... How can we fix this? :-) Thanks -----Messaggio originale----- Da: Andrea Brancatelli [mailto:andrea@brancatelli.it] Inviato: lunedì 20 febbraio 2006 15.31 A: users(a)lists.roundcube.net Oggetto: Problems with DBMail Hello guys. I'm having problem with Apache + Php 4 + RoundCube + Mysql 5 + Dbmail 2.0.something. Somethimes and only with some users after an user accesses the webmail everything works as expected BUT the child he just instanciated (in apache) never closes... the apache process goes 100% and stays in "Write" forever until the apache child sigfault or I restart apache manually. Seems like Roundcube goes somehow in a dead lock when finishing the execution of the current page... The good thing is that the webmail works ok, so the problem is in the cleanup code of RoundCube (I suppose), the bad thing is that my processor usage keeps going 100% 100% 100% 'till the machine crash or something. I need some kind of urgent help about this.... Where do we start from? A particular thing is that the problem always arise with a specific user.. -- Andrea Brancatelli Consulente Informatico http://andrea.brancatelli.it/

1 0

[RoundCube Users] Configuration charset
by Marc Auzanneau 20 Feb '06

20 Feb '06

Hi all, I've just installed the roundcubemail-0.1b version. How can I configure the charset to 8859-1 ? In don't find parameter in main.inc.php file ? Thanks -- Marc Auzanneau

4 5

[RoundCube Users] Problems with DBMail
by Andrea Brancatelli 20 Feb '06

20 Feb '06

Hello guys. I'm having problem with Apache + Php 4 + RoundCube + Mysql 5 + Dbmail 2.0.something. Somethimes and only with some users after an user accesses the webmail everything works as expected BUT the child he just instanciated (in apache) never closes... the apache process goes 100% and stays in "Write" forever until the apache child sigfault or I restart apache manually. Seems like Roundcube goes somehow in a dead lock when finishing the execution of the current page... The good thing is that the webmail works ok, so the problem is in the cleanup code of RoundCube (I suppose), the bad thing is that my processor usage keeps going 100% 100% 100% 'till the machine crash or something. I need some kind of urgent help about this.... Where do we start from? A particular thing is that the problem always arise with a specific user... -- Andrea Brancatelli Consulente Informatico http://andrea.brancatelli.it/

1 0

Re: [RoundCube Users] Multiple hosts
by David Collantes 20 Feb '06

20 Feb '06

> On Mon, 20 Feb 2006, David Collantes wrote: > > // This domain will be used to form e-mail addresses of new users > > // Specify an array with 'host' => 'domain' values to support multiple > > hosts > > $rcmail_config['mail_domain'] = 'domain.com'; > > > > I have tried several ways to add the array and it seems not to work. Can > > anyone provide and example on how to add more domains to this line, > > using domain1.com, domain2.com and domain3.com? Thanks in advance. > > $rcmail_config['mail_domain'] = array('domain.com','domain2.com'); I think I am missing something. I added the array, deleted the users from the database and their profiles (to start fresh again). I am not seeing any difference with the adding of the array. Will using this _and_: // Path to a virtuser table file to resolve user names and e-mail addresses $rcmail_config['virtuser_file'] = '/etc/mail/virtusertable'; Be causing any problem? In other words, what exactly $rcmail_config['mail_domain'] variable (in this case, array) do? Thanks! -- David

1 0

[RoundCube Users] Multiple hosts
by David Collantes 20 Feb '06

20 Feb '06

Hi there! Excellent program, thank you so much for it! In the main.inc.php file, there is a section that reads: // This domain will be used to form e-mail addresses of new users // Specify an array with 'host' => 'domain' values to support multiple hosts $rcmail_config['mail_domain'] = 'domain.com'; I have tried several ways to add the array and it seems not to work. Can anyone provide and example on how to add more domains to this line, using domain1.com, domain2.com and domain3.com? Thanks in advance. Cheers, -- David

3 2

[RoundCube Users] Charset 8859-1
by Marc Auzanneau 20 Feb '06

20 Feb '06

Hi, Always for my problem of charset If we take an example : é (e accent aigu) (é in html) : * with ISO-8859-1(5), 8 bits are = 11101001 * with UTF-8 , bits are = 11000011 10101001 If you read UTF-8 character with a ISO-8859-1 reader (very much used in France), result = 2 characters = Ã© We cannot use this solution which is not readable for my French contacts Thank you to look at the problem :-) -- Marc Auzanneau

1 0

[RoundCube Users] RoundCube Webmail 0.1 Beta released
by Thomas Bruederli 20 Feb '06

20 Feb '06

After a long period of development, we're proud to announce the first official Beta release of our webmail client. Many bugfixes and some new features have found their way into this version. For a detailed list of improvements, please refer to the Changelog [1]. Please forgive us, if the feature you're requested is not available yet or the bug you're reported has not been fixed in this release. The project is still under heavy development but nobody is working on it full-time. Because of that, things will probably take more time than you expect but until you don't get an answer on your requests, they are bot rejected or ignored. I'd like to thank all the developers, translators and posters who keep this project up and I'm looking forward to announce more good news in the future. Have fun! [1] http://sourceforge.net/project/shownotes.php?group_id=139281&release_id=394…

8 32

[RoundCube Users] postfix/smtp and rc
by Greg Hetrick 20 Feb '06

20 Feb '06

Should be a simple resolution, I have a setup with postfix+dovecot for my SMTP/IMAP server. Trying to set up smtp mailer from RC but getting "failed to add reciepient" initially I was getting auth errors, but added the %u and %p which stopped that problem. I have a working postfix build and can send/recv email no problems from the command line. Any Suggestions? Thanks, Greg

2 3

[RoundCube Users] Localization not working?
by James Bedford 20 Feb '06

20 Feb '06

Hi, Only recently joined the list, so sorry if this has already been discussed. I've set my language to en_GB, and it appears as en_GB in the "language" field in the mysql table. However, roundcube doesn't display messages/labels in en_GB. In rcube_shared.inc, in the routine rcube_label, the line: include_once($INSTALL_PATH.'program/localization/'.$sess_user_lang.'/labelsinc'); is loading en_US labels (i.e. 'program/localization/en_US/labels.inc') In preferences, English (US) is selected. Can anyone help? Regards, Jim

1 0

[RoundCube Users] Mail sent from apache
by Brent Brownfield 20 Feb '06

20 Feb '06

I have the latest cvs of roundcube installed and it seems to be working properly except for the fact that all email that I send from it is sent from apache instead of the user I am logged in as. Anybody know what is causing this? I do not have a setting in the virtuser_file setting. Do I need something in their to translate my user name into an email address? If so what is the format of the virtuser_file? Thanks. -- Brent Brownfield

7 7

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users