- Users - Roundcube mailing lists

CSV Kontakte Uploud
by Carsten Hegenberg - Hegenberg Trendcenter 23 Jun '16

23 Jun '16

Hallo! ich kann leider keine Kontakte als CSV hochladen, leider lediglich im Vcard Format einzeln - vielleicht kann mir jemand helfen - Danke! -- mit herzlichen Grüßen Carsten Hegenberg Hegenberg Trendcenter Esplanade 7-9 | 24534 Neumünster | Germany Tel: +49. 4321. 200 7 20 Fax: +49. 4321. 200 7 220 verkauf(a)hegenbergcenter.de / www.hegenbergcenter.de ________________________________________ Diese Nachricht und die darin enthaltenen Informationen können vertraulich oder ausschließlich für den Adressaten bestimmt sein. Wenn Sie nicht der bestimmungsgemäß Adressat sind und diese Nachricht versehentlich erhalten haben sollten, ist die Verwendung des Inhalts strengstens untersagt! Anderen als dem bestimmungsgemäß Adressaten ist es untersagt, diese E-Mail zu lesen, zu speichern, weiterzuleiten oder ihren Inhalt, auf welche Weise auch immer, zu verwenden. Bitte informieren Sie uns über die falsche Zustellung und löschen Sie diese E-Mail. Wir verwenden aktuelle Virenschutzprogramme. Für Schäden, die dem Empfänger gleichwohl durch von uns zugesandte, mit Viren befallene E-Mails entstehen, schließen wir jede Haftung aus.

1 0

Resized Firefow window but not "writing area"
by barul 23 Jun '16

23 Jun '16

Hello, I just noticed that when I resize my Firefox window (for example if I make it half the size of my screen vertically), not all the fields are resized. The one where you write the mail keeps its normal size, while all the others are of correct size. Is it Firefox that doesn't work as it should? Thanks -- barul

2 2

Frame with the messages is scrolled to the top on message list update
by Dmitry Katsubo 20 Jun '16

20 Jun '16

Hello everyone, On my main Roundcube window I have list of messages, 100 per page, grouped by thread. When I read the messages one by one (I use arrow down key) I go far beyond the initial visible portion of messages so the view is scrolled to certain row. Then the automatic update of messages happens. After that the view is scrolled to the top, and the selected message is not visible anymore (one needs to scroll down for a while). That is very annoying as it interrupts the reading. Could it be improved so that if message list is refreshed, the scrolling position is preserved? I would say the following logic should be applied: Restore the scroll offset. If the selected message is in a viewport, do nothing. Otherwise scroll the view so that the selected message appears at the top – this situation may happen if a bulk of messages top the top of selected one are deleted. It could be that the selected message is deleted but I think there could be a "best effort" option here as well. Roundcube v1.2.0 -- With best regards, Dmitry

1 0

Address book setup
by Dmitry Katsubo 17 Jun '16

17 Jun '16

Dear all, I am trying to setup LDAP address book in Roundcube, till now without any success. I think I have setup the LDAP address book correctly, but the moment I open it, it shows blank persons' cards. Unfortunately nothing is logged into /var/log/roundcube/error. What I did wrong? $rcmail_config['ldap_public']['public'] = array( 'name' => 'Public LDAP Addressbook', 'hosts' => array('localhost'), 'port' => 389, 'user_specific' => false, 'base_dn' => 'cn=persons,cn=corporate', 'scope' => 'one', 'filter' => '(objectClass=inetOrgPerson)', 'groups' => array( 'base_dn' => '', 'filter' => '(objectClass=groupOfNames)', 'object_classes' => array("top", "groupOfNames"), ), ); -- With best regards, Dmitry

2 2

Registration at the forum
by Dmitry Katsubo 09 Jun '16

09 Jun '16

Dear community, I have difficulties in registering at roundcube forum [1]. More concrete, I haven't received the confirmation email (I've checked spam folder). I have tried two different emails and it didn't work. Unfortunately I don't know how to contact the administrator of the forum. [1] http://roundcubeforum.net/ -- With best regards, Dmitry

1 0

How to configure roundcube to relay mail
by John Tucker 08 Jun '16

08 Jun '16

Greetings, I have read the wiki and understand how to set the relay host, user id and user password but I have a question on how to identify an alternate port to use for mail relay. I would add/update the following to the config/config.inc.php file $config['smtp_server'] = ‘my.host.com <http://my.host.com/>:10025’; $config[‘smtp_user’] = 'userid’; $config[‘smtp_pass’] = ‘password’; or is there another 'smtp_port’ parameter or such? Thanks for the help. jt

2 1

Enigma shows and uses stale/old keys
by Jari Fredriksson 31 May '16

31 May '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I updated my pgp keys and gpg -K and gpg2 -K do show the keys correctly. Enigma, however, does not see or use the updated things in my keys. Does it have some kind of a cache somewhere? I restarted apache2 but that is all I did, and that did not help... Any ideas? - -- jarif(a)iki.fi -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEARECAAYFAldMwTkACgkQKL4IzOyjSrbY+wCgpXoONG3xDEMWWTiNTVJOuswU FWQAniSEO7BebHMkz83sraVYCJMakHZu =tJqJ -----END PGP SIGNATURE-----

2 1

confused about PGP
by Andreas Meyer 27 May '16

27 May '16

Hello! Just upgraded to Version 1.2 because of the enigma-plugin. It's great Roundcube supports PGP now! I enabled the plugin and importet a public key. When I write a mail to the owner of that key, I choose "encrypt" and when I send it, Roundcube asks for the public key of the sender. Shouldn't it ask for the key of the recipient? Kind regards Andreas

2 2

RCU 1.2 & Enigma (s/mime)
by Jari Fredriksson 23 May '16

23 May '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Nice! But... My posts contain a signed plain message wrapped with pgp stuff. I would love to have the signature sent as an separate mime part. I can see that enigma supports this format, at least when reading a message from some other. How to enable that in roundcube/enigma? - -- jarif.bit -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEARECAAYFAldDQhsACgkQKL4IzOyjSrZGagCglkjnvecL0JaYmBFZPt8Jifv5 mFMAnA9OqrzJoqK3I2qMuMrmtXlpThWh =muLo -----END PGP SIGNATURE-----

2 2

Roundcube Webmail 1.2.0 released
by Thomas Bruederli 22 May '16

22 May '16

Dear subscribers Today we proudly announce the stable version 1.2.0 of Roundcube Webmail which is now available for download. It introduces new features since version 1.1 covering security and PGP encryption topics: - PHP7 compatibility - PGP encryption - Drag-n-drop attachments from mail preview to compose window - Mail messages searching with pre-defined date interval - Improved security measures to protect from brute-force attacks And of course plenty of small improvements and bug fixes. There wasn't much feedback on the 1.2-beta version and the release candidate which we consider a good sign. Some cleanup and stabilization of the Enigma plugin just happened for the now stable version. As already announced with the 1.2-beta release [1], PGP encryption comes in two flavors: client-side using the Mailvelope browser extension and server-side with the Enigma plugin using GnuPG on the server. Support with the Mailvelope browser plugin comes out of the box and is automatically enabled if the Mailvelope API is detected in a user’s browser. The Mailvelope documentation [2] explains how to enable it for your site. The features of the Enigma plugin, which comes with the release package and simply needs to be activated for your Roundcube installation are explained in Alec's blog post [3]. With the release of Roundcube 1.2.0, the previous stable release branches 1.0.x and 1.1.x will switch in to LTS low maintenance mode which means they will only receive important security updates but no longer any regular improvements from upstream. See the complete Changelog in our wiki [4] and download the new packages from https://roundcube.net/download. Roundcube 1.2.0 is considered stable and we recommend to update all productive installations of Roundcube. As usual, don’t forget to backup your data before updating ;-) Best, Thomas [1] https://roundcube.net/news/2015/11/23/roundcube-webmail-1.2-beta-out-now [2] https://www.mailvelope.com/en/help#watchlist [3] https://kolabian.wordpress.com/2015/10/13/enigma-plugin-pgp-encryption/ [4] https://github.com/roundcube/roundcubemail/wiki/Changelog

1 0

signature
by Luciano Gabriel Andino 08 May '16

08 May '16

Hello, I'm looking the way to access all user signatures and modify them (telephone number, etc). Is there any way? I can access to DB but need to look how they look in HTML view. thanks in advance, -- Saludos!! Luciano Andino GNU/Linux user #185103 Santa Fe - Argentina -----------------------------------------------

1 0

Limit number of attachments
by Sam 28 Apr '16

28 Apr '16

Hello, I've set up roundcube and everything is ok except one thing that I can't find how to tune : When sending email, users can upload a lot of files if each file is under the : - upload_max_filesize - post_max_size before sending the email (wich one will be reject by exim size rules). But someone can fill up the upload temp file with just sending upload files. Did I missed something or is there anything to do to limit the number of attachment that a user can send ? Thanks a lot. Samuel.

2 2

session data stored in memcache is not in plain-text?
by Alex Mihičinac 27 Apr '16

27 Apr '16

Hi all, I have a question about sessions stored in memcache. It seems that if I switch session store to memache, all the session data looks like binary data. This is an example: ------------------------------------ get 9c5h585db64sqiubm5h9k1ioi1 VALUE 9c5h585db64sqiubm5h9k1ioi1 2 808 x�uTMS�0�+��R&A>��b2C{[qTd�H2��d;��j�v��%8�oO0*vDT�D �~4�'q<�D�#� 8�p�F��(�k�0z&J��0�1�Ғ .... END ------------------------------------ Is this expected behavior? I'd expect something like this: ------------------------------------ get qvildov82ptrfv0d6jsgo9h6h2 VALUE qvildov82ptrfv0d6jsgo9h6h2 0 167 a:3:{s:7:"changed";i:1461755585;s:2:"ip";s:14:"<anonymized>";s:4:"vars";s:84:"temp|b:1;language|s:5:"sl_SI";request_token|s:32:"<anonymized>";";} END ------------------------------------ Any hint more than welcome. Best regards, Alex

2 3

roubecube-1.1.4 - use sender identify based on "To" field
by Robert Söderlund 26 Apr '16

26 Apr '16

Hi all! Is it possible to configure roundcube to use the address in "To" or "Delivered-To" headers without setting up a new identity when I reply or forward mails. The important (at least of what I think ;) part of the configuration is: $config['plugins'] = array('identity_select',...) $config['identity_select_headers'] = array('Delivered-To','To'); $config['identities_level'] = 0; //Robert -- Robert Söderlund

2 2

auto folder activation
by joao＠7lan.net 21 Apr '16

21 Apr '16

I've found some information about this but only with known folders. I would like to know how to automatically activate dinamically created folders in my roundcube. I have some sieve rules that dinamically creates folders based in discussion lists, dates and etc... how to make roundcube show them automatically when new folder are created? Thanks!

1 0

Published Updates 1.1.5 and 1.0.9
by Thomas Bruederli 21 Apr '16

21 Apr '16

Dear subscribers We just published updates to both stable versions 1.0 and 1.1 delivering important bug fixes and helps protecting Roundcube against more XSS and CSRF attacks. Version 1.1.5 also has two new plugin hooks integrated and version 1.0.9 comes with cherry-picked fixes from the more recent version to ensure proper long term support. See the full changelog in the wiki [1] and the selection for 1.0.9 on the release page [2]. Both versions are considered stable and we recommend to update all productive installations of Roundcube with either one of these versions. Download them from GitHub via https://roundcube.net/download. As usual, don’t forget to backup your data before updating! Best, Thomas [1] https://github.com/roundcube/roundcubemail/wiki/Changelog#release-115 [2] https://github.com/roundcube/roundcubemail/releases/tag/1.0.9

2 1

Release candidate for 1.2 out now
by Thomas Bruederli 13 Apr '16

13 Apr '16

Hello folks Roundcube 1.2 is pretty much complete and after adding some last-minute improvements we just published a release candidate to give it another round of testing before we slap the 'stable' tag on it. We hereby invite you all to test the release candidate and report remaining bugs to our issue tracker. The most important features we added in 1.2 are: * PHP7 compatibility * PGP encryption in two flavours * Improved security measures to protect from brute-force and CSRF attacks See the full Changelog in our wiki: https://github.com/roundcube/roundcubemail/wiki/Changelog Download the packages or the signed source directly from Github: https://github.com/roundcube/roundcubemail/releases/tag/1.2-rc Please note that we recommend to test it on a separate environment. And don't forget to backup your data before installing it. Another note: with the upcoming stable release of 1.2.0 the old 1.0.x and the 1.1.x series will only receive important security fixes. Updates to these two branches are to be released soon. So stay tuned! Best, Thomas

1 0

problem subject
by Svilen Arsov 13 Apr '16

13 Apr '16

Hi, sory for my mistake in first letter. (roundcube 2.1 beta) ... I have another problem with roundcube 1.2 beta When I send e-mails from roundcube to rouncube there is "no subject". This problem doesn't exist when sending e-mails to other mails, e.g gmail and etc. Can you help me with this? P.S. I have already upgraded roundcube to 1.2 beta version, installed lot of plug-ins and don't want to get back to the stable version 1.4.4 due to this bug. Below you can find a screen shot with the installed plug-ins, marked in red. http://pcexpert.bg/screenshot.rar [1] Kind Regards eng. Svilen Arsov Links: ------ [1] http://pcexpert.bg/screenshot.rar

2 4

problem subject
by Svilen Arsov 13 Apr '16

13 Apr '16

Hi, I have another problem with roundcube 2.1 beta When I send e-mails from roundcube to rouncube there is no subject. This problem doesn't exist when sending e-mails to other mails, e.g gmail and etc. Can you help me with this? P.S. I have already upgraded roundcube to 2.1 beta version, installed lot of plug-ins and don't want to get back to the stable version 1.4 due to this bug. Below you can find a screen shot with the installed plug-ins, marked in red. http://pcexpert.bg/screenshot.rar [1] Kind Regards eng. Svilen Arsov Links: ------ [1] http://pcexpert.bg/screenshot.rar

1 0

Problem roundcube virtual network eth0:0
by Svilen Arsov 11 Apr '16

11 Apr '16

Hello, I have a problem with round cube and my network. I have 3 ips and the OS is Linux Debian: - eth0 - 46.55.253.244 - Ethernet - eth0:0 - 46.55.253.245- Ethernet (Virtual) - eth0:1 - 46.55.253.246- Ethernet (Virtual) When adding the virtual networks round cube is connecting and sending e-mails from x.x.x.245. Pls see the following log: Apr 10 11:12:05 ns1 dovecot: imap-login: Login: user=<office(a)pcexpert.bg>, method=PLAIN, rip=46.55.253.245, lip=46.55.253.244, mpid=11257, session=<9wjJ+xww5gAuN/31> When the virtual networks are down, then roundcube works fine: Apr 10 11:32:05 ns1 dovecot: imap-login: Login: user=<office(a)pcexpert.bg>, method=PLAIN, rip=46.55.253.244, lip=46.55.253.244, mpid=11257, session=<9wjJ+xww5gAuN/31> In config.ins.php the code is: $config['default_host'] = 'pcexpert.bg'; When the code changes to $config['default_host'] = 'localhost' , roundcube is connecting 127.0.0.1, but sending e-mails from 46.55.253.245 Log: Apr 10 11:32:05 ns1 dovecot: imap-login: Login: user=<office(a)pcexpert.bg>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=11257, session=<9wjJ+xww5gAuN/31> Pls advise, how can roundcube connect and send e-mails to the real ip 46.55.253.244, when having vitual networks. Best Regards, Svilen

3 4

default config
by Benny Pedersen 31 Mar '16

31 Mar '16

found that spell check is default enabled to another host outside of localhost, it should imho not be default enabled but keeped as a example to setup spell check with all that problems i have with rc 1.1 i consider drop roundcube :/ -- Benny Pedersen

1 0

roundcube next
by Bob Miller 28 Mar '16

28 Mar '16

Hello, I was recently telling a client of mine that I would be updating roundcube in the not-too-long-term future with roundcube next, which prompted me to remember that I haven't heard any activity from that corner of the world recently. So I went to check the portal, but I get a 503 error. Did I miss some something somewhere and things moved without me? Maybe I am finally so much the nerd that the cool kids all went somewhere else without telling me :D -- Bob Miller Computerisms 867-334-7117 / 867-633-3760 http://www.computerisms.ca

3 4

convert rcu mysql config to sqlite3
by Benny Pedersen 27 Mar '16

27 Mar '16

but how to make this simply ? googled a bit of that and found https://gist.github.com/esperlu/943776 is it safe to use it with roundcube ?

1 0

Problem adding a plugin
by GDR! 23 Mar '16

23 Mar '16

Hi, I've tried to add a plugin to https://plugins.roundcube.net/packages/submit but without much luck: when I paste the repo: https://github.com/gjedeer/roundcube-postfix-virtual-user-mapping.git I'm getting: No valid/supported repository was found at the given URL The error makes it sound like it's a problem with the submission process that you guys need to fix. Or, if it's a problem with my repo, maybe you have some suggestions what's wrong. By the way, I tried to register on a forum to get support for this, but: The user gdr with Email [....] (IP [......].21) is a Spam, please contact forum administrator. Catch 22, because forum admin's email is not published...

1 0

Trac platform migrated to Github
by Thomas Bruederli 20 Mar '16

20 Mar '16

Dear subscribers After many ups and downs with our Trac platform which hosted our wiki and the ticket system for years now, we finally migrated the data over to Github where we already host the git repositories. Therefore, on March 25th 2016 the trac.roundcube.net site will be shut down Starting today, the site is in read-only mode meaning that user logins and ticket reporting have been disabled already. This means that submitting new tickets now goes through Github and so does the roadmap planning and overview. The entry point for that is our Github project page at https://github.com/roundcube/roundcubemail Today we just migrated 4.8K tickets from the Trac database to Github issues [1], leaving the invalid and duplicate ones behind. Unfortunately the ticket numbers could not be kept and have all been re-assigned. The original trac ticket numbers are mentioned in the migrated issue body and can be used for searching. We'll also install a redirect service which will translate old Trac urls to the corresponding issue pages. The wiki will also be translated into Github markdown pages. There's some manual reviewing involved in order to update or remove outdated information during this process. Please give us some more days to complete that task. Thank you for your understanding and see you on Github Best, Thomas [1] https://github.com/roundcube/roundcubemail/issues

1 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users