- Users - Roundcube mailing lists

Problems with Installer for ver 1.1.12-2 on CentOS 7
by Robert Moskowitz 05 Feb '19

05 Feb '19

I am on page 3 of the Installer, testing out the STMP config (IMAP config works). I get the error: SMTP send: NOT OK(Connection failed: Failed to connect socket: Unable to find the socket transport "http" - did you forget to enable it when you configured PHP I am looking in my config.inc.php and I see: $config['smtp_server'] = 'http://klovia.htt-consult.com'; and I did: setsebool -P httpd_can_network_connect on I also tried: setsebool -P httpd_can_sendmail on Still no SMTP send. Please point me to where to look for this. ================================== As a side, small issue, the spell checker pull down only offered: pspell, atd, or google. enchant was not in the list, but I see in the config.inc.php: // Set the spell checking engine. Possible values: // - 'googie' - the default (also used for connecting to Nox Spell Server, see 'spellcheck_uri' setting) // - 'pspell' - requires the PHP Pspell module and aspell installed // - 'enchant' - requires the PHP Enchant module // - 'atd' - install your own After the Deadline server or check with the people at http://www.afterthedeadline.com before using their API // Since Google shut down their public spell checking service, the default settings // connect to http://spell.roundcube.net which is a hosted service provided by Roundcube. // You can connect to any other googie-compliant service by setting 'spellcheck_uri' accordingly. $config['spellcheck_engine'] = 'pspell'; Is enchant an option, but just not offered in the installer? I do have it installed on my system thanks

1 0

fail to send email with attachment
by Andreas Meyer 04 Feb '19

04 Feb '19

Hello! I tried to send an email with attachement but it didn't arrive. The mail arrived but without attachment. Found this in the log: [04-Feb-2019 14:26:25 +0100]: <ecet9es0> PHP Error: a.meyer(a)bitcorner.de can't read /tmp/rcmAttmntv4nS0F (not in temp_dir) in /srv/www/htdocs/ema il/plugins/filesystem_attachments/filesystem_attachments.php on line 216 (POST /email/?_task=mail&_unlock=loading1549286782239&_lang=en&_framed=1 &_action=send) [04-Feb-2019 14:29:53 +0100]: <ecet9es0> PHP Error: a.meyer(a)bitcorner.de can't read /tmp/rcmAttmntH3UNqf (not in temp_dir) in /srv/www/htdocs/ema il/plugins/filesystem_attachments/filesystem_attachments.php on line 216 (POST /email/?_task=mail&_unlock=loading1549287002537&_lang=en&_framed=1 &_action=send) What's wrong please? Kind regards Andreas -- PGP-Fingerprint: D392 5D21 0299 63D7 5BAE 4562 1E56 B2EA 81A2 59F1

1 1

LDAP AddressBook with pagedResults control (from ldapsearch)
by Evgeniy Korneechev 04 Feb '19

04 Feb '19

2 2

Roundcube IMAP issue
by Чернов Роман 22 Jan '19

22 Jan '19

Hello, I have an issue with Roundcube IMAP connection. Suddenly it stopped working: $config['imap_debug'] = true; it doesn even logging and connectingto IMAP to see error logs. Dovecot is up, 143, 993 ports are running. I can connect to it and recieve mails from remote mail clients. -- Best Regards, *Chernov Roman* E-mail: chernov.roman1984(a)gmail.com

1 0

Re: [RCU] Login is successful only with the second attempt
by Evgeniy Korneechev 21 Jan '19

21 Jan '19

21.01.2019, 14:23, "Reindl Harald" <h.reindl(a)thelounge.net>: > Am 21.01.19 um 11:44 schrieb Evgeniy Korneechev: >> Hi. >> We periodically have problems with authentication in webmail - login is successful only with the second attempt. >> The problem occurs only when the login page is open a long time ago; if refresh it before entering, login is successful... >> >> Did anyone have the same problem? How can I fix this? >> >> Roundcube webmail 1.2.3 > > well, your session pretty sure is timing out and so CSRF tokens become > invalid What timeout? How can I change it? -- Best regards, Evgeniy Korneechev.

2 1

Login is successful only with the second attempt
by Evgeniy Korneechev 21 Jan '19

21 Jan '19

Hi. We periodically have problems with authentication in webmail - login is successful only with the second attempt. The problem occurs only when the login page is open a long time ago; if refresh it before entering, login is successful... Did anyone have the same problem? How can I fix this? Roundcube webmail 1.2.3 -- Best regards, Evgeniy Korneechev.

2 1

Re: [RCU] cannot change settings in webpage
by mick crane 13 Jan '19

13 Jan '19

On 2019-01-12 02:52, Reindl Harald wrote: > Am 11.01.19 um 21:14 schrieb mick crane: >> On 2019-01-11 11:58, mick crane wrote: >>> On 2019-01-11 11:48, mick crane wrote: >>>> ALERT: dopey home user >>>> sorry to be a nuisance >>> >>> Also what seems now to be happening is that sending message times out >>> but if I reboot the server the message is sent. >>> which is why I sent twice. >> >> what seems to be happening is dovecot is sending the email > > dovecot for sure don't send a mail > > you confuse smtp with imap/pop3 and roundcube is still only a client > like thunderbird, outlook and so on yes well whatever happens ( roundcube tells postfix to send the mail, postfix tells roundmail it's delivered, roundcube tells dovecot ?) there's a breakdown in communication somewhere. -- Key ID 4BFEBB31

1 1

Messagesizelimit info
by Andreas Meyer 11 Jan '19

11 Jan '19

Hello! Can it be examined, what messagesize the receiving MTA supports? Per plugin maybe? Kind regards Andreas -- PGP-Fingerprint: D392 5D21 0299 63D7 5BAE 4562 1E56 B2EA 81A2 59F1

1 0

cannot change settings in webpage
by mick crane 11 Jan '19

11 Jan '19

ALERT: dopey home user sorry to be a nuisance Is current Debian buster, dovecot, roundcube with enigma and managesieve plugins. Everything was working nicely 1.3.8 and then something went wrong. Since installed 1.4-beta. I was a bit confused because I read it that the "updateto" would update the downloaded 1.4-beta to the configuration from the previous install but updates instead the previous install. Anyway it is working now and installation page has the green ticks except I just get the unhappy document face in the right hand window in the "settings" tab. In the "settings/folders" tab all the folders are there but I get the unhappy document picture if I try to make a new folder. I can move emails about between folders in "mail". Likewise the "PGP keys"tab shows the keys I copied there by hand but there is no information in the right hand window. There is the text "rapunzel.home refused to connect". ufw is turned off. Is this likely an issue with Dovecot or something daft I haven't done in roundcube configuration ? Can't see anything in any of the logs I've looked at except enigma log says: [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: USING GPG 2.2.12 with PHP 7.3.0-2 [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: OPENING GPG SUBPROCESS WITH THE FOLLOWING COMMAND: [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: /usr/bin/gpg --status-fd '3' --command-fd '4' --no-secmem-warning --no-tty --no-default-keyring --no-options --no-permission-warning --exit-on-status-write-error --trust-model always --pinentry-mode loopback --ignore-time-conflict --ignore-valid-from --with-colons --with-fingerprint --with-fingerprint --fixed-list-mode --homedir '/usr/share/roundcubemail/plugins/enigma/home/mick' --list-secret-keys [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: BEGIN PROCESSING [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: selecting streams [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => got 1 [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: GPG output stream ready for reading [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => about to read 65536 bytes from GPG output [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => read 470 bytes [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: selecting streams [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => got 1 [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: GPG output stream ready for reading [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => about to read 65536 bytes from GPG output [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => read 474 bytes [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: selecting streams [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => got 3 [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: GPG output stream ready for reading [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => about to read 65536 bytes from GPG output [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => read 0 bytes [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: GPG error stream ready for reading [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => about to read 65536 bytes from GPG error [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => read 0 bytes mick -- Key ID 4BFEBB31

1 2

Recalling Emails
by Elite Cryo Studio 11 Jan '19

11 Jan '19

Hi, I need to recall an email...is this possible? Kind regards Elite Cryo Studio

2 1

email will not list in browser
by Web Analysts 11 Jan '19

11 Jan '19

ubuntu 14.04, postfix/dovecot/mysql. using imap. Email will not list in any browser. I can manage folders and see the correct # of emails, change my preferences, etc. below is an excerpt of my imap logfile Please advise. Thank you! [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN AUTH=LOGIN] Dovecot (Ubuntu) ready. [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] C: A0001 ID ("name" "Roundcube" "version" "1.3.3" "php" "5.5.9-1ubuntu4.26" "os" "Linux" "command" "/?_task=settings&_action=edit-folder&_mbox=Sent%20Items&_framed=1") [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: * ID ("name" "Dovecot") [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: A0001 OK ID completed. [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] C: A0002 AUTHENTICATE PLAIN ****** [49] [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: A0002 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE BINARY MOVE] Logged in [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] C: A0003 LIST "" "Sent Items" [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: * LIST (\HasNoChildren) "." "Sent Items" [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: A0003 OK List completed. [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] C: A0004 LIST "" "*" [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: * LIST (\HasNoChildren) "." "Junk E-mail" [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: * LIST (\HasNoChildren) "." "Deleted Items" [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: * LIST (\HasNoChildren) "." "Sent Items" [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: * LIST (\HasNoChildren) "." INBOX [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: A0004 OK List completed. [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] C: A0005 STATUS "Sent Items" (MESSAGES UNSEEN) [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: * STATUS "Sent Items" (MESSAGES 4 UNSEEN 0) [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: A0005 OK Status completed. [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] C: A0006 LOGOUT [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: * BYE Logging out [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: A0006 OK Logout completed. [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN AUTH=LOGIN] Dovecot (Ubuntu) ready. [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] C: A0001 ID ("name" "Roundcube" "version" "1.3.3" "php" "5.5.9-1ubuntu4.26" "os" "Linux" "command" "/?_task=settings&_action=edit-folder&_mbox=INBOX&_framed=1") [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: * ID ("name" "Dovecot") [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: A0001 OK ID completed. [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] C: A0002 AUTHENTICATE PLAIN ****** [49] [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: A0002 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE BINARY MOVE] Logged in [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] C: A0003 LIST "" INBOX [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: * LIST (\HasNoChildren) "." INBOX [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: A0003 OK List completed. [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] C: A0004 STATUS INBOX (MESSAGES UNSEEN) [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: * STATUS INBOX (MESSAGES 9 UNSEEN 4) [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: A0004 OK Status completed. [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] C: A0005 LOGOUT [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: * BYE Logging out [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: A0005 OK Logout completed.

1 0

log imap activity
by Anton Gorlov 11 Jan '19

11 Jan '19

Hi! Whai is right way to log imap activity? need log delete mail,folders and login (mail), ip of client

3 3

cannot change settings in roundcube webpage
by mick crane 11 Jan '19

11 Jan '19

ALERT: dopey home user sorry to be a nuisance Is current Debian buster, dovecot, roundcube with enigma and managesieve plugins. Everything was working nicely 1.3.8 and then something went wrong. Since installed 1.4-beta. I was a bit confused because I read it that the "updateto" would update the downloaded 1.4-beta to the configuration from the previous install but updates instead the previous install. Anyway it is working now and installation page has the green ticks except I just get the unhappy document face in the right hand window in the "settings" tab. In the "settings/folders" tab all the folders are there but I get the unhappy document picture if I try to make a new folder. I can move emails about between folders in "mail". Likewise the "PGP keys"tab shows the keys I copied there by hand but there is no information in the right hand window. There is the text "rapunzel.home refused to connect". ufw is turned off. Is this likely an issue with Dovecot or something daft I haven't done in roundcube configuration ? Could it be anything to do with SSL which I'm also having bother getting to work this time ? Can't see anything in any of the logs I've looked at except enigma log says: [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: USING GPG 2.2.12 with PHP 7.3.0-2 [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: OPENING GPG SUBPROCESS WITH THE FOLLOWING COMMAND: [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: /usr/bin/gpg --status-fd '3' --command-fd '4' --no-secmem-warning --no-tty --no-default-keyring --no-options --no-permission-warning --exit-on-status-write-error --trust-model always --pinentry-mode loopback --ignore-time-conflict --ignore-valid-from --with-colons --with-fingerprint --with-fingerprint --fixed-list-mode --homedir '/usr/share/roundcubemail/plugins/enigma/home/mick' --list-secret-keys [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: BEGIN PROCESSING [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: selecting streams [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => got 1 [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: GPG output stream ready for reading [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => about to read 65536 bytes from GPG output [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => read 470 bytes [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: selecting streams [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => got 1 [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: GPG output stream ready for reading [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => about to read 65536 bytes from GPG output [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => read 474 bytes [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: selecting streams [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => got 3 [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: GPG output stream ready for reading [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => about to read 65536 bytes from GPG output [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => read 0 bytes [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: GPG error stream ready for reading [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => about to read 65536 bytes from GPG error [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => read 0 bytes mick -- Key ID 4BFEBB31

1 0

Email will not list in any browser
by Web Analysts 06 Jan '19

06 Jan '19

ubuntu 14.04, postfix/dovecot/mysql. using imap. Email will not list in any browser. I can manage folders and see the correct # of emails, change my preferences, etc. no meaningful errors logged. Please advise. Thank you!

2 4

php fatal error
by Web Analysts 05 Jan '19

05 Jan '19

Setting up RC 1.33 on linux. Test send/imap connect fine. When I login however no email or folders are listed whatsoever. My RC error log shows [04-Jan-2019 15:54:22 America/Los_Angeles] PHP Fatal error: Call to a member function get_folder() on a non-object in /var/www/html/roundcube/public_html/program/steps/mail/compose.inc on line 63 [04-Jan-2019 15:54:22 America/Los_Angeles] PHP Stack trace: [04-Jan-2019 15:54:22 America/Los_Angeles] PHP 1. {main}() /var/www/html/roundcube/public_html/index.php:0 [04-Jan-2019 15:54:22 America/Los_Angeles] PHP 2. include_once() /var/www/html/roundcube/public_html/index.php:303 Please advise. Thank you!

2 1

problem with attachments
by mick crane 23 Dec '18

23 Dec '18

ALERT:- dopey home user. How do I tell which roundcube I'm using ? Everything is working except I get SERVICE CURRENTLY NOT AVAILABLE! Error No. [600] if I try to open an email with attachments cups print server is on same PC as roundcubemail. I was fiddling with cups the other day on client and I'm certain all I did was typed "lpadmin <server> <printer>" on client in error of understanding purpose of lpadmin although it is possible I updated server with apt before this happened but may have been after. Relevant might be that apt suggested auto-remove for a few files which I did. I was using roundcubemail-1.3.8 Anyway PHP seemed to stop working, just showing text. apache error log showed. "[php7:error] [pid 5733] [client 10.0.0.101:53579] PHP Fatal error: Uncaught Error: Class 'DOMDocument' not found in /usr/share/roundcubemail-1.3.8/program/lib/Roundcube/html.php:357\nStack trace:\n#0" so I set about removing/installing with apt PHP modules roundcube webpage says are required. php-dom php-xml php-jason I forget exactly which. installed roundcubemail-1.4-beta-complete by running "updateto" using still there roundcubemail-1.3.5 directory there was an error in the install saying php-pspell wasn't installed so I got that with apt and tried the install script again where it says roundcube is already installed, up to date or something. In /usr/share/ I have the directories /usr/share/roundcubemail-1.3.5 /usr/share/roundcubemail-1.3.8 whereas I thought I might have /usr/share/roundcubemail-1.4-beta So the questions are how do I fix this 600 error ? how do I find out which roundcube I'm using ? does 1.4 beta install itself in 1.3.8 directory ? What bit of software looks after attachements or is this some configuration, I'm pretty certain that the attachments are only gpg signatures. Is it necessary to protect some libraries from apt ? regards. (please if reply do not add attachment). mick -- Key ID 4BFEBB31

1 2

Problem mit der angezeigten Mailadresse in Roundcube
by Tino Kurth 12 Dec '18

12 Dec '18

Hallo zusammen, wir haben die aktuelle Version von Roundcube im Einsatz. Allerdings haben wir das Problem, dass der Anmeldename am Postfach nicht gleich der Mailadresse ist. Wir suchen nach einer Möglichkeit, dies anzupassen, weil die abgehenden Mails ebenfalls mit dem Anmeldenamen und der dazugehörigen Domain versendet werden. Die so zusammen gesetzte Mailadresse gibt es aber nicht. Wir haben versucht, diverse php Dateien anzupassen. Da das aber nicht Sinn und Zweck ist, frage ich in der Mailingliste, ob es nicht einfacher geht. Über eine Antwort würde ich mich sehr freuen. Viele Grüße Tino Kurth

4 4

Hello and Help!
by Gerardo Contreras 11 Dec '18

11 Dec '18

Hello all. I'm just joining the list. I've browsed through the archives but I have a couple of questions. I just installed the 1.4 beta. We like the Elastic skin so we are planning to use it as a default for all my users.. I plan to keep it updated, but I have a couple of questions. * Is it possible to have a popup or a modal when a user first signs in -- Just a simple window with the TOS for the account with an OK, or Accept button, that lets you go on to the second window which lets you complete your Identity. * I noticed there are user levels. 1 - 4. 4 being default. how would I go about managing those on a per user, or per group basis? I want MOST users not to be able to modify their email address or their organization. * Using the elastic skin -- I noticed on the configs that I can put a logo on the main screen, in fact I was able to put a logo but it is stretched in an ugly way. What are the proper dimensions for my logo? Can I specify a different logo on the main mail page? I see the logo on the upper left corner of my screen, but it's just a part of the logo. I would like to specify a different one there. I have 3 specified on my array by looking at examples: one for '*' which points to a large logo, one for ':favicon', and one for ':small', but the :small one does not show on the upper left. it's part of the '*' one. * Is there a way to resize the center pane (or hide/minimize it) when needed? (for example, when an extraordinarily wide message, so that I don't have to scroll side to side too much) -- This would also need to be possible when redacting mail so that the Options and Attachments column does not get in the way. That is all for now. I am sure I will have more questions as I keep using the system. Thank you all for your help. -- Universidad del Papaloapan Campus Loma Bonita 281 872 9230 ext 313

1 0

version 1.3.8. with Melanie2-Larry-Mobile
by Meaulnes Legler ＠ roundcube 02 Dec '18

02 Dec '18

/scrambled above on 1.3.8 — ok below on 1.3.7/ hello again I wrote already a month ago to know if the mobile plug-in Melanie2-Larry-Mobile would work with version 1.3.8. of RoundCube. I tried it anyway, but unfortunately, it doesn't. It's fine with 1.3.7, with 1.3.8 I get a scrambled mobile view. Anyone knows why? Could it be a missing StyleSheet? Thank you and best regards _~_ '¿') `-´ Meaulnes Legler Zurich, Switzerland +41¦0 44 260 16 60

1 0

Request check failed
by Michael Orlitzky 01 Dec '18

01 Dec '18

What are we supposed to do when our users call in and say they're seeing the CSRF failure page? The error message says to contact the server administrator... For your protection, access to this resource is secured against CSRF. If you see this, you probably didn't log out before leaving the web application. Human interaction is now required to continue. Please contact your server-administrator. Is there a way to turn the CSRF protection off? Or at least a way to reset it when it goes stupid? I'm ready to human interaction.

2 2

Is there a plugin button that will rename email files instead of moving them to the .Trash dir?
by Philip Rhoades 25 Nov '18

25 Nov '18

People, I have 1,566 Maildir folders and I would like to script process deleted files once a day while they are still in their original dirs - but I don't want them listed - is there a plugin or some sort of one-click mechanism I can use to rename a file from something like: 15430. . . to: .15430. . . ? or something that won't display in the RCM client? Thanks, Phil. -- Philip Rhoades PO Box 896 Cowra NSW 2794 Australia E-mail: phil(a)pricom.com.au

3 5

Re: [RCU] User registration plugin - is there any for roundcube ?
by dlugasny＠protonmail.com 21 Nov '18

21 Nov '18

Hi, thank You for Your answer. Now I understand. I thought that Roundcube offer something like this. Does Rouncube offer stable solution for LDAP ? If I will store new user details in LDAP, will it be possible to integrate it with Roundcube (login/password reminder etc.)? Or for LDAP I have to use separate tool ? Thanks in advance for any support. Cheers Dlugasny Sent with ProtonMail Secure Email. ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Wednesday, November 21, 2018 3:33 PM, Reindl Harald <h.reindl(a)thelounge.net> wrote: > Am 21.11.18 um 15:18 schriebdlugasny(a)protonmail.com: > > > does Roundcube support user registration ? > > I would like to enable some button on the login page - "register new > > account". > > Does Roundcube support it? > > Roundcube is a MAIL-CLIENT like Thunderbird or Outlook > > How would it create a new mailuser on the mailserver which is normally a > different machine then the webserver running roundcube and even if both > are running on the same machine - how do you create a mailaccount and > HOW do you authenticate that this is OK > > so the answer is simply NO until you develop a plugin specifcily acting > with your evirnonment how ever you make sure that random spammer can't > create a new mail account and start spamming until your server get blocked

1 0

User registration plugin - is there any for roundcube ?
by dlugasny＠protonmail.com 21 Nov '18

21 Nov '18

Hi, does Roundcube support user registration ? I would like to enable some button on the login page - "register new account". Does Roundcube support it ? Cheers Dlugasny

1 0

plugin to register new e-mail accounts
by dlugasny＠protonmail.com 20 Nov '18

20 Nov '18

Hi, is it possible to register new e-mail account using Roundcube webpanel ? If yes, how to activate E-mail account registration ? Thanks in advance for any support. Cheers Dlugasny

1 0

Re: [RCU] Purging an sqlite database - RC 1.3.8
by Sophie Loewenthal 12 Nov '18

12 Nov '18

> On 8 Nov 2018, at 19:55, Reindl Harald <h.reindl(a)thelounge.net> wrote: > > > > Am 08.11.18 um 19:49 schrieb Sophie Loewenthal: >>> On 8 Nov 2018, at 19:47, Reindl Harald <h.reindl(a)thelounge.net> wrote: >>> >>> >>> >>> Am 08.11.18 um 19:44 schrieb Sophie Loewenthal: >>>> I tried the gc.sh after stopping nginx & backed up the file: >>>> >>>> # bin/gc.sh >>>> ERROR: [13] database or disk is full (SQL Query: DELETE FROM session WHERE changed < datetime('now','-1200 seconds')) >>>> >>>> The disc has 8Mb free >>> >>> you simply can't optimize a 20 MB database file when there are only 8 MB >>> free - who in the world has 8 MB free in 2018? >> >> >> Who in the world has a 20Mb sqlite db for RC? I do. You should have guessed :-) >> >> I run a lean machine. > > and? > > my smartphone has 140 GB free space > the 20 MB sqlite file are not big > but 8 MB free is a bad joke Not a problem: lvresize -L 50M /dev/vg00/sqlite resize2fs !$ > run the optimise resize2fs /dev/vg00/sqlite 30M lvresize -L 32M /dev/vg00/sqlite resize2fs !$ add some e2fsck’s in there too. Not an issue, but I’ll do this during the day because it’s late.

2 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users