- Users - Roundcube mailing lists

Problem after upgrading
by Stuart Bailey 24 Jun '10

24 Jun '10

Sorry if this is a known bug - I tried to search the bug trakker, but it reports an internal error. I have just upgraded from roundcube-0.3.1 to 0.4-beta. I'm now seeing a problem sending messages with attachments. On send, there is an error popup that disappears too quickly to read it. The message does not get saved into the sent items folder. In the logs, I get: [24-Jun-2010 09:44:40 +0100]: IMAP Error: Could not save message in Sent in /srv/www/htdocs/webmail/program/steps/mail/sendmail.inc on line 620 (POST /webmail/?_task=mail&_action=send). Any suggestions would be appreciated Many thanks Stuart -- --------------------------------------- Stuart Bailey BSc (hons) CEng CITP MBCS LinuSoft (Managing Director) Linux Specialist & Software Developer ~~~~~~~~~~~~~~~~~~~~~~~~~~~ Phone: (0845) 658 3563 Direct: +44 (0) 1953 878162 Fax: +44 (0) 1603 858583 ~~~~~~~~~~~~~~~~~~~~~~~~~~~ http://www.linusoft.co.uk http://www.bluetoothadvertising.org.uk ---------------------------------------- -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. No malware was found: NETGEAR ProSecure Web/Email Security Threat Management Appliance has scanned this mail and its attachment(s). _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

Global
by Rafael Guedes de Souza 22 Jun '10

22 Jun '10

How can I change 'attachement name' parameter from 'RFC2231 Integral (Thunderbird)' to 'RFC2047 Integral (other)' for all users. What file contain the configurations wich are not present at the preference collum at the user table? Thanks! Atenciosamente, Rafael Guedes de Souza Analista de Suporte ipTrust Tecnologia Ltda - Florianópolis/SC Fone DDR +55 48 3031 3492 Fone Cel. +55 48 8811 7281 Fone Com. +55 48 3333 1551 VMware Technical Sales Professional IronPort Systems Partner Riverbed Tecnhology Partner VMware Enterprise Partner Eset Nod32 Partner EMC² Partner _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Slow loading of messages
by Kristof Bajnok 22 Jun '10

22 Jun '10

Hi, I've recently migrated to svn-trunk and since then I find that the initial loading of messages is very slow. With an inbox with ~2200 messages it takes more than 30 sec to load. After that, switching pages is relatively fair (~5 sec), but only if I happen to switch during keepalive. It seems that it fetches all the headers instead of only the first 40 (as suggested by pagesize). I'm on Courier-IMAP with an empty message_sort_col. I do not have caching enabled, are there any known problems remaining with it? Any suggestions? Kristof _______________________________________________ List info: http://lists.roundcube.net/users/

2 4

Uploads and 0.4 Beta
by Bradlee Landis 21 Jun '10

21 Jun '10

It seems I'm having a problem with uploads, but it may be a known bug. Looks like anything larger than 1M-2M does not ever upload, it just runs and runs, but this looks to be fixed in the Beta, right? Is 0.4-beta good enough for production environments? Can I use all plugins with 0.4-beta that are in 0.3.1? -- Thanks, Brad Landis _______________________________________________ List info: http://lists.roundcube.net/users/

3 2

Fwd: Uploads and 0.4 Beta
by Bradlee Landis 21 Jun '10

21 Jun '10

On Mon, Jun 21, 2010 at 4:36 PM, matsen <matsen(a)theteal.de> wrote: > Afaik this is not fixed in 0.4 beta. > I am using 0.4 beta and "Maximum allowed file size is 2.0 MB" is shown > when I upload a file. You change this by modifying .htaccess in the roundcube folder, but even though I changed it, it will try to send, but never actually sends anything. It's not a matter of what it says, but what actually happens, which is a bug. -- Thanks, Brad Landis _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Roundcube 0.3.1
by Soph Cargill-Blogg 21 Jun '10

21 Jun '10

Hello, We have Roundcube 0.3.1. installed and working on a Linux server. We have noticed that if we reply to a message and then start typing, the typed text appears at the end of the message body, not at the beginning. Is there a configuration item we can use to change this, or will an upgrade to 0.4 beta change this behaviour? Many thanks, Soph -- Soph Cargill-Blogg Systems Administrator Extension: 236 Phone: 01692 403461 Mobile: 07889 216767 ##################################################################################### Attention: This e-mail is privileged and confidential. The information contained in this message and or attachments is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. If you are not the intended recipient please delete the message and notify the sender. Scanned by MailMarshal - Marshal8e6's comprehensive email content security solution. ##################################################################################### _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

Sending broke in r3757?
by Arne Berglund 18 Jun '10

18 Jun '10

Hey all, I have four different RC installs with different plugin configs that I am using for testing. Today I updated two of them to 3757. Neither instance from that point on would send messages. Trying to send results in a hang and spinning progress wheel. Downgrading back to r3752 restored them both to being able send. Anyone else see this? -- Arne Berglund System Administrator, Internet Services Lane Education Service District Eugene, OR 541.461.8343 ____________ _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

Can anyone comment on how safe Roundcube is?
by Amory Gears 15 Jun '10

15 Jun '10

Would you say that it is safer or as safe as Yahoo, Google or ISP e-mail adresses? What happens if someone opens a message containing a virus or a Trojan, is there any risk to webmail or only the user's computer? Just wondering, thank you so much for your help! _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

How can I set up Roundmail to show a different logo on the login page?
by Amory Gears 14 Jun '10

14 Jun '10

How can I set it up to display a different logo on the login page than once logged in? I allready changed the logo for once I am logged in but it is too small for the main login page. Sorry, newbie question: Also how do I answer to someone who answers one of my questions? I tried earlier and didn't know what to do, thanks! _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Problem with Sender ID
by Amory Gears 14 Jun '10

14 Jun '10

Hello, I was having a problem with Roundcube, instead of displaying sender "John H. Smith" when I send something it rather displays johnsmith(a)mail.com can this be fixed somehow? I find that less professional than if it where John H. Smith. Please advise, thanks! _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

multiple creation of files in /tmp
by Esteban Torres 14 Jun '10

14 Jun '10

They are creating many files in / tmp named sess * The server is running out of space. On this server I have also squirrelmail and do not really know who is causing these files. The files have user and group apache. _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

/home/user/Maildir/subscriptions
by Rafael Guedes de Souza 13 Jun '10

13 Jun '10

Hello guys! Based what does the file /home/user/Maildir/subscriptions is created? In here, for each user the file has one kind of content... Is it normal? Atenciosamente, Rafael Guedes de Souza Analista de Suporte ipTrust Tecnologia Ltda - Florianópolis/SC Fone DDR +55 48 3031 3492 Fone Cel. +55 48 8811 7281 Fone Com. +55 48 3333 1551 IronPort Systems Partner Riverbed Tecnhology Partner VMware Enterprise Partner Eset Nod32 Partner EMC² Partner _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

virtuser_file broke in 3706?
by Arne Berglund 04 Jun '10

04 Jun '10

I'm not certain when it stopped working, but I noticed that the virtuser_file plugin that was working fine last time I tested is not working at all now. I even went so far as to check out a new SVN copy, built a brand new database, and the only plugin enabled is virtuser_file. Still no luck. I have the plugin set to pull from a local file on the system. As I said, I know that this worked a short time ago, perhaps 2 weeks back? Can anyone else confirm this, either yes or no? We were planning to move totally from squirrelmail to RC at the end of July, but since we provide email to 13 different domains via virtusers, and the the new_user_identity plugin can't grab the email address from LDAP, this plugin is an absolute must have function for our move and on-going as well. -- Arne Berglund System Administrator, Internet Services Lane Education Service District Eugene, OR 541.461.8343 ____________ _______________________________________________ List info: http://lists.roundcube.net/users/

2 4

Where is the RoundCube logo ?
by Frank Bonnet 03 Jun '10

03 Jun '10

Hello For internal reasons I've been asked to add our logo to the Roundcune one on the starting page. Does anybody could tell me where to go to add our company logo ? Thnaks a lot _______________________________________________ List info: http://lists.roundcube.net/users/

2 2

0.4 Beta .. Beta2 .. RC
by Jim Pazarena 02 Jun '10

02 Jun '10

is there any time frame under consideration for a new Beta or perhaps an RC ? _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

Upgrade To 0.4 Beta?
by Carlos Mennens 28 May '10

28 May '10

I noticed today that a Beta 0.4 is available for download. I was really thinking about installing it on my server (200 users) but not sure how many people have tried it or if there are any issues with upgrading from 0.3.1 to 0.4 Beta. Can anyone who has installed and used 0.4 recently tell me how you like it and if you experienced any issues at all. Thanks! _______________________________________________ List info: http://lists.roundcube.net/users/

3 4

add senders and contact groups
by Andres Sulleiro 27 May '10

27 May '10

Hey all, When you click on the "always show images from..." link that email address is added to your contacts. Now, with 4.0 and contact groups, how does that work? Is there a way to add these emails to a specific contact group, say a "Subscriptions" group? Right now all of these are in a single contact group, along with my actual contacts (friends, family, etc). Is there a way to separate them? Thanks! // Andrés _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

RC 0.4
by Diego Gomes - TI - Cecred 25 May '10

25 May '10

Hello all.. Im using RC 0.3. In the 0.4 beta, there are option to create groups of users? For each user? Is a good idea upgrade to 0.4??? Thankss -- Esta mensagem foi verificada pelo sistema de antivirus e acredita-se estar livre de perigo. _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Problem faced during upgradation to 0.4-beta
by J. Bakshi 25 May '10

25 May '10

Dear list, I was very curious to upgrade to the latest roundcube. My running version was 0.3.1. I have downloaded the 0.4-beta and as suggested copied the index.php, bin; Sql.. etc.. by ``````````````` cp -rvf < latest_folder > <existing_old_folder> ```````````````````` I have followed this for all the folders suggested in UPGRADE file. When I tried with the bin/update.sh it reported as ``````````````````` bin/update.sh: line 2: ?php: No such file or directory bin/update.sh: line 3: syntax error near unexpected token `!=' bin/update.sh: line 3: `if (php_sapi_name() != 'cli') {' ``````````````````````` So I unlocked the installer and tried with web interface. #3 Test Config suggested to upgrade the mysql by SQL/mysql.update.sql. Hence I executed the statements belonged to the "upgrade from 0.3.1..." section. But still the web interface is unhappy with DB schema and reports ```````````````````````` Check configured database settings DSN (write): OK DB Schema: NOT OK(Database schema differs) Please manually execute the SQL statements from /srv/www/htdocs/roundcubemail-0.3.1/SQL/mysql.update.sql on your database. See comments in the file and execute queries that are superscribed with the currently installed version number. ``````````````````````````````````` Though I can log in the email account successfully, I wonder if the mysql warnings indicates any real trouble which can screwup my installation in future when I'll go for up-gradation again . i.e. to 0.4 stable branch Any clue/suggestion/hint please ? Thanks -- জয়দীপ বক্সী _______________________________________________ List info: http://lists.roundcube.net/users/

2 2

Re: [RCU] Emails not showing up in roundcube [SOLVED]
by Zbigniew Szalbot 24 May '10

24 May '10

Hello, On Mon, May 24, 2010 at 09:45, Zbigniew Szalbot <zszalbot(a)gmail.com> wrote: > Thanks! > >> Make sure you have no characters after closing ?> tag in config files. >> Also disable all plugins, if you're using some. Custom skin was responsible for this! I changed back to the defaultish one and it works perfectly! Thanks! -- Zbigniew Szalbot www.slowo.pl www.fairtrade.net.pl _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Emails not showing up in roundcube
by Zbigniew Szalbot 24 May '10

24 May '10

Hello, I am using roundcube-0.4.b on a FreeBSD server. When I log into Roundcube it will show how many unread emails there are in inbox but I am not able to display them. Nor is it possible to display other mail folders than inbox. Where should I start looking to fix this? Thank you very much! -- Zbigniew Szalbot www.slowo.pl www.fairtrade.net.pl _______________________________________________ List info: http://lists.roundcube.net/users/

2 4

modify icons
by emilio brambilla 20 May '10

20 May '10

hello, do someone know where does the icons of the default theme come form? I'd like to know if they came from some opensource icon library, as my users asked to replace the "delete" button (now a 'prohibited' road sign) with a trash can and maybe I can found a trash bin in the library ;-) -- bye, emilio _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

0.3 --> 0.4 migration ?
by Frank Bonnet 19 May '10

19 May '10

Hello Is there some special things to do in order to migrate my 0.3 roundcube to 0.4 ? I use mysql as backend Thank you _______________________________________________ List info: http://lists.roundcube.net/users/

3 3

priming the mysql tables with data
by Egbert Jan 18 May '10

18 May '10

Hi, also asked this om the forum. I'm in a situation where I need to pre-load (prime) the database tables with correct data. Getting the data ready for loading isn't the problem, I do this all the time with the postfixadmin tables. A bit of perl and some copy ans pasting fits the job. The roundcube tables, however, are cleverly linked with foreign keys which prevents me to just delete a table and re-generating an filling it with my own data. Unnessessary to say that ['auto_create_user'] = FALSE here. Is there anybody out there who could put me om the right trace? I realize that this is more a MySQL question but I thought trying it here first. TIA Egbert Jan (NL) _______________________________________________ List info: http://lists.roundcube.net/users/

3 3

New version 0.4-beta released
by Thomas Bruederli 15 May '10

15 May '10

Dear subscribers A new major release is now available for deep testing. With this version we fixed over 50 bugs and added new features like threaded message listing and contact groups support as well as many little improvements that make e-mail reading with Roundcube an even better experience. While it's still called a beta release we consider it to be stable enough for productive environments. However the new features may have some minor issues which we are happy to hear about. Download the 0.4-beta version now from http://roundcube.net/download A complete list of changes can be found as usual at http://trac.roundcube.net/wiki/Changelog Attention: Please note that the database schema has changed. Therefore you should carefully read the UGRADING instructions and make sure you apply the according SQL statements from SQL/*.update.sql to your database. Run bin/update.sh to see what needs to be done. Have fun! Thomas _______________________________________________ List info: http://lists.roundcube.net/users/

4 4

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users