- Users - Roundcube mailing lists

It makes no download attachments in Internet Explorer, just in FireFox
by Hugo Leonardo de Freitas 17 Mar '08

17 Mar '08

Someone help me? I installed RoundCube Stable 0.1 and its dependencies, but not downloading attachments larger than 500k using Internet Explorer, just using FireFox. There is a parameter that I set in RoundCube, or in php.ini or Apache to correct this problem? *I use CentOS 5 with the following systems:* httpd-2.2.3-11.el5_1.centos.3 httpd-devel-2.2.3-11.el5_1.centos.3 httpd-manual-2.2.3-11.el5_1.centos.3 libdbi-dbd-mysql-0.8.1a-1.2.2 mod_auth_mysql-3.0.0-3.1 mysql-5.0.22-2.2.el5_1.1 mysql-connector-odbc-3.51.12-2.2 mysql-devel-5.0.22-2.2.el5_1.1 MySQL-python-1.2.1-1 mysql-server-5.0.22-2.2.el5_1.1 perl-DBD-MySQL-3.0007-1.fc6 php-5.1.6-15.el5 php-cli-5.1.6-15.el5 php-common-5.1.6-15.el5 php-gd-5.1.6-15.el5 php-ldap-5.1.6-15.el5 php-mbstring-5.1.6-15.el5 php-mcrypt-5.1.6-12.el5.centos php-mysql-5.1.6-15.el5 php-odbc-5.1.6-15.el5 php-pdo-5.1.6-15.el5 php-pear-1.4.9-4 php-pecl-Fileinfo-1.0.4-3.el5.centos system-config-httpd-1.3.3.1-1.el5 Thanks, _ °v° *Hugo Leonardo de Freitas* /(_)\ Red Hat Certified Engineer (RHCE) ^ ^ TerraVista Consultoria Ltda. www.tvconsultoria.com.br 55 62 3251-2990 _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Roundcube is very slow after updating to v0.1-stable
by Helge 16 Mar '08

16 Mar '08

Hello list, after updating my roundcube installation from v0.1-rc2 to v0.1-stable, everything appears to be much slower. Regardless if I log on, check for new messages, start to compose a new message and wait for the window to open, change a folder, and so on, each step takes at least twice or three times as long as before, sometimes even more. The process of saving an unsent message took only a part of a second before, now, in this very moment, this message is saved (or not...?) since over a minute. :-( Does anyone have this problem, too? - The above mentioned saving process just died with a timeout error... - Or does anyone have an idea, what I could do? Of course I already rebooted both, the IMAP server and the webmailer, including the MySQL-server. Any help is appreciated! Thanks a lot, Petri PS. I wasn´t able to send this message, - I switched by to 0.1-rc2 and everything is fine and fast again. :-( _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

User-specific special folders (e.g. trash)
by Kyle Wheeler 12 Mar '08

12 Mar '08

Hello, I'm trying to figure out how to provide my users with user-specific special folders (namely: trash, drafts, and sent). I know that I can set $rcmail_config['trash_mbox'] to anything I like, but what if joe@mydomain wants his trash in "INBOX.Trash" while bob@mydomain wants his trash in "INBOX.Deleted Messages" and fred@mydomain wants HIS trash in "Trash". I filed a bugreport asking for this feature, and the bug was closed saying that this was already possible in the config. Does anyone know how this can be done? Thanks, ~Kyle -- This job of playing God is a little too big for me. Nevertheless, someone has to do it, so I'll try my best to fake it. -- Larry Wall _______________________________________________ List info: http://lists.roundcube.net/users/

2 2

Threaded message view
by Daniel Spies 11 Mar '08

11 Mar '08

Hi list, I already asked before some time, but still couldn't get a solution. In fact it's hard to read a mailing list through RoundCube. What I (and probably many others) need is the option to switch to threaded message view inside a folder of my IMAP account. The normal view is very perfect for all incoming mail, but for mailing lists I need something like this : http://typo3.org/fileadmin/dl/newsgroups/thread.gif Any ideas? Thanks, Daniel _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

how to change connection interval
by A.L.E.C 10 Mar '08

10 Mar '08

Hi! I want to increase interval between page refreshes (imap connections), so can I do this in "config" way? $rcmail_config['session_lifetime'] = 10; $rcmail_config['keep_alive'] = 300; // added by me $rcmail_config['javascript_config'] = array('read_when_deleted', 'flag_for_deletion', 'keep_alive'); It's good or bad? What about draft_autosave and session_lifetime when are set to smaller values than keep_alive? Should I worry about that? Regards -- Aleksander 'A.L.E.C' Machniak http://alec.pl gg:2275252 LAN Management System Developer http://lms.org.pl _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

installation de roundcune
by burinho＠yahoo.fr 10 Mar '08

10 Mar '08

Bonjour, je suis nouveau sur cette liste, voilà j'essaye désespérement d'installé roundcube mais je tombe sur cette erreur DATABASE ERROR: CONNECTION FAILED! Unable to connect to the database! Please contact your server-administrator. je suis debian etch et j'utilise postgressql En mode console via la commande \c -utilisteur j'arrive à me connecter et sur l'interface pgphpadmin aussi. merci pour votre aide _______________________________________________ List info: http://lists.roundcube.net/users/

4 6

Problem for attachement display
by Jean-Christian BEDIER 09 Mar '08

09 Mar '08

Hello, Tomorrow i decided install roundcube, and all work fine during installation with installer. But i have a problem with attachement: In fact it's not possible display .jpeg .png etc Whereas i have install imagick and php5 gd. Someone can help me? Thanks for your help ! _______________________________________________ List info: http://lists.roundcube.net/users/

1 1

[Help] courier-authlib-mysql configure for Roundcube-0.1 stable.
by Zhang Huangbin 06 Mar '08

06 Mar '08

Hi, all. I'm testing Roundcube-0.1 stable, but i'm confused how to configure courier-authlib-mysql for roundcube. Can anybody mail me your authmysqlrc file or paste here? Thanks very much. ---- Best Regards. Zhang Huangbin 2008.03.06 - OpenBSD 4.2 -release, i386. - RHEL 5.1 Client _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Proposed gigo.com maintenance 3/22 and 3/23
by jfesler＠gigo.com 06 Mar '08

06 Mar '08

This is to notify you that on 3/22 and 3/23, certain services that you have available to you will be affected. - SCA folks: goldenrivers.org, betonywood.org email addresses will be delayed; your web sites down during the maintenance. - gigo.com ssh/mail/web: mail delayed, web site down - Mailing lists - mail will be delayed. Mail will not be lost but may be delayed, for email addresses hosted here. Details are at: http://gigo.com/archives/announcements/proposed-downtime-322-323.html If the timing of this downtime impacts you for business reasons, contact me. Jason Fesler "the guy" @ gigo.com Mail domains affected: betonywood.org corvette-resto.com deepfried.us gigo.com goldenrivers.org lists.gigo.com lists.roundcube.net sawdusters.org starrynyte.com suchter.com wakelee.com yersinia.com + any domains I "MX" for (you know who you are!). _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

RoundCube Webmail 0.1-stable released
by Thomas Bruederli 04 Mar '08

04 Mar '08

Dear subscribers After more than two years of development we're proud to announce the first stable version of RoundCube Webmail. It's not as feature rich as we'd like it to be but the released version is considered to run stable for a productive environment. Thanks to our users we fixed many bugs and added some nice new features since the first 0.1-alpha version was published in 2005. So go ahead and upgrade your installations now! Download the latest release from http://roundcube.net/downloads A more or less complete list of changes is available at http://trac.roundcube.net/wiki/Changelog The TinyMCE-based HTML message composition is now included but should still be considered as experimental. Please also note that this is the last release that runs on PHP 4. As suggested by the GoPHP5 project RoundCube will be PHP 5 only in future versions. If you want to report bugs, please use our tracker but read the instructions (http://trac.roundcube.net/wiki/Howto_ReportIssues) first. Have fun! ~Thomas _______________________________________________ List info: http://lists.roundcube.net/users/

3 3

Regressions in trunk (vs. rc2)?
by kraymer 03 Mar '08

03 Mar '08

Hello everyone, today I played around and upgraded to today's svn trunk version of roundcube. I was really curious since I read that there are only two tickets left til roundcube will go stable. Anyway, I was kinda disappointed. I only tested a little but the overall impression is that it will work worse than what I'm used to with the rc2 version. Especially two things are annoying: 1. The new mark-as flag menu popup does not work. Instead, the "as read"/"as unread" is displayed all the time, scrambling the message subject line of the first message in the current folder. Clicking the links doesn't work either. (I could provide a screenshot for that.) 2. Message marking broken; clicking on single messages doesn't mark the message visually. Unfortunately I just notice that I didn't test if the functionality would work. I didn't open any tickets yet, maybe it is known? Since I don't provide a patch nor did regression testing by svn version I didn't dare writing to the dev-list ;) Since all lists are rather low traffic I hope it will reach you developers anyway. For now I svn switched back to rc2 but I volunteer to do some testing or test patches if necessary. Hope that all helps, Sebastian _______________________________________________ List info: http://lists.roundcube.net/users/

3 7

first attempt at install - Internal Server Error
by Ross Hulford 29 Feb '08

29 Feb '08

http://edinburghnights.co.uk/roundcube/ The error log says.. [Fri Feb 29 10:56:10 2008] [error] [client 87.81.42.122] File does not exist: /home/edinburg/public_html/500.shtml [Fri Feb 29 10:56:10 2008] [error] [client 87.81.42.122] SoftException in Application.cpp:239: Directory "/home/edinburg/public_html/roundcube" is writeable by group [Fri Feb 29 10:54:57 2008] [error] [client 87.81.42.122] File does not exist: /home/edinburg/public_html/500.shtml [Fri Feb 29 10:54:57 2008] [error] [client 87.81.42.122] SoftException in Application.cpp:239: Directory "/home/edinburg/public_html/roundcube" is writeable by group [Fri Feb 29 10:54:56 2008] [error] [client 87.81.42.122] File does not exist: /home/edinburg/public_html/500.shtml [Fri Feb 29 10:54:56 2008] [error] [client 87.81.42.122] SoftException in Application.cpp:239: Directory "/home/edinburg/public_html/roundcube" is writeable by group [Fri Feb 29 10:54:55 2008] [error] [client 87.81.42.122] File does not exist: /home/edinburg/public_html/500.shtml [Fri Feb 29 10:54:55 2008] [error] [client 87.81.42.122] SoftException in Application.cpp:239: Directory "/home/edinburg/public_html/roundcube" is writeable by group [Fri Feb 29 10:54:54 2008] [error] [client 87.81.42.122] File does not exist: /home/edinburg/public_html/500.shtml Any help would be welcome. R. _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

Big mails
by Armindo Silva 28 Feb '08

28 Feb '08

Hi there! I have a problem with mails bigger than 1MG, when i open them all i get is a blank page. I thought it was a php problem, but i increased the memory limit to 32mg and it didn't work.. Any ideas? Cumps Armindo -- -- "The only way of discovering the limits of the possible is to venture a little way past them into the impossible." Sir Arthur C. Clarke _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Inline attachments
by Patrick Zaloum 22 Feb '08

22 Feb '08

I have just noticed an odd behavior: If you have an e-mail with an attachment, a window appears and says : "Loading Data..." until the attachment is downloaded and then i assume normally it is automatically downloaded. However, in the case of known filetypes such as PDF where acrobat will open it in the browser, the pdf appears in the little "Loading Data" frame which is about 3x2" .. definately not enough to view a pdf file. Does anyone have any thoughts about this behavior? _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

taskbar button
by aux 21 Feb '08

21 Feb '08

Hi, i'm using roundcubemail-0.1-rc2 (i upgraded from version 0.1-beta). apparently all works ok except the icons of taskbar. I added two customized icons (vacation and change-password) but the text of icons not show, i see only the image. My configuration for do this: program/localization/es/labels.inc (i configured roundcube with spanish language) [...] $labels['change_password'] = 'Cambiar password'; $labels['vacation'] = 'Vacation E-mail'; [...] skins/my-skin/includes/taskbar.html (i also configured $rcmail_config['skin_path'] = 'skins/my-skin/';) [...] <a class="button-change-password" onclick="window.open(this.href); return false" href="https://my-tool-for-change-password.html"><?php echo htmlspecialchars(rcube_label("change_password")) ?></a> <a class="button-vacation" onclick="window.open(this.href); return false" href="https://my-tool-for-vacation.html"><?php echo htmlspecialchars(rcube_label("vacation")) ?></a> [...] Previus version of roundcube works ok with this configuration i have been able show the text os icons with the following lines: <roundcube:button command="change_password" label="change_password" class="button-change-password" onclick="window.open(this.href); return false" href="https://my-tool-for-change-password.html"/> <roundcube:button command="vacation" label="vacation" class="button-vacation" onclick="window.open(this.href); return false" href="https://my-tool-for-vacation.html"/></a> but when doing 'click' to the icons doesn't happen anything Why with previus versions of roundcube works ok ? Anyone help me? thanks _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

Re: [RCU] [RCD] Default Login Page
by daniel＠nullroutes.com 21 Feb '08

21 Feb '08

till wrote: > On Feb 6, 2008 9:47 PM, daniel(a)nullroutes.com <daniel(a)nullroutes.com> wrote: > >> (...) >> I don't suppose anyone could help me locate the required section of code >> so I can edit. >> > > In trunk: > <http://trac.roundcube.net/browser/trunk/roundcubemail/index.php#L173> > > The code has pretty good inline documentation and since we feed > *everything* through index.php - that's the place to look at. I am not > sure which version you run, so you may have to "translate" line 173 to > your's. > > Hope that helps! > Till > Hi Till Thanks so much for your reply .. however could I ask for some further help please. Would I change this line (173 on index.php) else { $OUTPUT->show_message($IMAP->error_code == -1 ? 'imaperror' : 'loginfailed', 'warning'); rcmail_kill_session(); } To else { $OUTPUT->show_message($IMAP->error_code == -1 ? 'imaperror' : 'loginfailed', 'warning'); http://www.myloginpage.com rcmail_kill_session(); } I'm not too sure on PHP .. any help would be appreciated! Thanks Dan _______________________________________________ List info: http://lists.roundcube.net/users/

2 2

Re: [RCU] Problem with resolution
by Felipe Neuwald 21 Feb '08

21 Feb '08

_______________________________________________ List info: http://lists.roundcube.net/users/

2 1

Re: [RCU] Global Address Book in RoundCube?
by john 20 Feb '08

20 Feb '08

On Wed, 20 Feb 2008 21:40:51 +0000, "Seb Payne" <seb(a)blackandmaple.com> wrote: Anyway, we really need a global address book and is there such a feature in RoundCube and is it LDAP compatible? I've seen various references to a patch on the forums and mailing list but have had no luck in finding anything. from config/main.db.inc: // in order to enable public ldap search, create a config array // like the Verisign example below. if you would like to test, // simply uncomment the Verisign example. /** * example config for Verisign directory * * $rcmail_config['ldap_public']['Verisign'] = array( * 'name' => 'Verisign.com', * 'hosts' => array('directory.verisign.com'), * 'port' => 389, * 'base_dn' => '', * 'bind_dn' => '', * 'bind_pass' => '', * 'search_fields' => array('mail', 'cn'), // fields to search in * 'name_field' => 'cn', // this field represents the contact's name * 'email_field' => 'mail', // this field represents the contact's e-mail * 'scope' => 'sub', // search mode: sub|base|list * 'filter' => '', // will be &'d with search field ex: (status=act) * 'fuzzy_search' => true); // server allows wildcard search */ _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Global Address Book in RoundCube?
by Seb Payne 20 Feb '08

20 Feb '08

I'm the webmaster of Purple Radio, the student radio station at the University of Durham in the United Kingdom. We are currently using Bongo (www.bongo-project.org) as our backend but for the moment, are using RoundCube as our web front end until they finish the work on the web end or if we move elsewhere. Anyway, we really need a global address book and is there such a feature in RoundCube and is it LDAP compatible? I've seen various references to a patch on the forums and mailing list but have had no luck in finding anything. Thanks! Seb -- Sebastian Payne Undergraduate Computer Science, University of Durham Webmaster, Purple Radio - www.purpleradio.co.uk Head of Van Mildert JCR Computer Committee seb(a)sebpayne.com - sebastian.payne(a)durham.ac.uk www.sebpayne.com - www.dur.ac.uk/sebastian.payne/ _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Wordwrap
by Michael Blinn 20 Feb '08

20 Feb '08

Is there a method for specifying a wordwrap for outgoing Roundcube emails? When I read emails composed in Roundcube in my Thunderbird client, they are displayed as one very long line. In the message source, it looks like the HTML Content-Type attachment lines are encapsulated in <pre> tags (perhaps from line ~80 in editor.js ?) I'm using r803 from http://nightly.roundcube.net/trunk/ Thank you, Michael Blinn -- CONFIDENTIALITY NOTICE: This message, and any attachments that may accompany it, contain information that is intended for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential, or otherwise exempt from disclosure under applicable law. If the recipient of this message is not the intended recipient, any disclosure, copying, or other use of this communication or any of the information, which it contains is unauthorized and prohibited. If you have received this message in error, please notify the original sender by return mail and delete this message, along with any attachments, from your computer. Thank you. _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Problem with resolution
by Felipe Neuwald 20 Feb '08

20 Feb '08

Hi Folks, Some users having problem using roundcube with 800x600 screen resolution. Here, one example when reply some email: http://www.neuwald.biz/files/roundcube800x600reply.jpg . Any idea of how to solve this? Thanks, Felipe Neuwald. _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Display Name on user identity initialization
by Patrick Zaloum 15 Feb '08

15 Feb '08

Hello! I love so many things about roundcube, if the developpers read this: great job, such a beautiful piece of software! thanks a lot! I had a question regarding the default display name at the time of a user's first identity initialization. It would seem that it simply takes the prefix of the email address as the display name. I run my web server where roundcube resides in the same place as my imap server so the users logging into roundcube do authenticate on the machine itself. How difficult would it be to pull the user's real name from /etc/passwd and use that as the display name that gets inserted when a user logs in for the first time? Thanks for any ideas! Pat _______________________________________________ List info: http://lists.roundcube.net/users/

2 2

Re: [RCU] Features? #2
by Alex Walker 11 Feb '08

11 Feb '08

On Mon, 11 Feb 2008 18:59:27 +0800, zamri <myzamri(a)gmail.com> wrote: >> Yeah, this is an issue. I guess you could write a fairly simple web >> interface to create/read/edit a procmail script using simple recipes. >> Putting this into RC seems a little in the wrong place to me, but I can >> understand the need. But again, I'd probably try and opt for a > filtering >> system that would work no matter what client you used. I wonder if > other >> webmail packages offer this - I've only used squirrelmail and RC, so I >> don't have wide experience really. > > It can be made to work if u install sieve daemon and RC have the plugin > (frontend) to configure it. > I don't know whether RC has this. Plugin concept will be good for RC. I have no experience of using sieve, but it sounds like a good idea to me! Alex _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Features? #2
by jody 10 Feb '08

10 Feb '08

Hi again More questions/suggestions: 6. Moveto When a mail is opened a listbox "move to..." appears above the text enabling you to move the mail to a folder. This listbox is absent in the overview. But sometimes i want to move a message to a folder before reading it. Is this possible in RC? (some hidden setting?) 7. Filters Is there a possibility in RC to define Filters which move messages with a certain header, say, to a particular folder? Thank you Jody _______________________________________________ List info: http://lists.roundcube.net/users/

4 4

Default Login Page
by daniel＠nullroutes.com 07 Feb '08

07 Feb '08

Hello - Was hoping for a little help please. I have a homepage and a form which allows a user to enter a username/password. I am trying to make this username and password send direct to my roundcube install. This part works fine. However when the wrong user/pass are entered roundcube gives the usual error 'login failed' but returns the user to the roundcube index.php - I would prefer it to return to user to my login form. I don't suppose anyone could help me locate the required section of code so I can edit. Kind Regards, Daniel _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users