- Users - Roundcube mailing lists

Sorting Message in the thread
by Nieścierowicz Adam 25 Sep '13

25 Sep '13

Hello, Maybe someone can help. Recently changed my view emails to Threaded. Is it possible that sorting within the thread was descending? (latest massage on the top) -- Regards, Adam Nieścierowicz

5 6

ignore namespaces other than inbox / lots of IMAP-list-commands every login
by Stefan Schwarz 23 Sep '13

23 Sep '13

hello everyone, my server has lots of folders in namespaces so roundcube goes over EVERY folder with a list-command. This takes several minutes while the login is waiting for all list-commands to be completed. The webmail is pretty unusable this way, i found no config to speed up/cache or circumvent this behavior. Not sure if this behaviour is a bug or a normal in 0.9.4? I could live with suppressing all folders other than below INBOX, if at least these folders are displayed in time. The servers capability: OK [CAPABILITY IMAP4REV1 NAMESPACE ID AUTH=PLAIN AUTH=LOGIN UIDPLUS STARTTLS ACL METADATA] pi4.de IMAP4rev1 example of imap_debug for a certain folder (repeated for all folders): [23-Sep-2013 16:30:52 +0200]: [5495] C: A0006 LIST "" INBOX/Folder1 [23-Sep-2013 16:30:52 +0200]: [5495] S: * LIST () "/" "INBOX/Folder1" [23-Sep-2013 16:30:52 +0200]: [5495] S: A0006 OK LIST completed greetings Stefan

1 0

Search result eliminated upon replying in 1.0-git?
by Michael Heydekamp 21 Sep '13

21 Sep '13

As I don't want to interfere in the still ongoing codebase cleanup discussion in the dev list, I'm posting it here: Scenario: - Select Sent folder - Initiate a search for a user name or e-mail address - Reply to any message being part of the search result - Send the reply - The search result goes away, folder is being reset to it's default state This applies to 1.0-git only, in 0.9.4 the search result keeps staying right after sending the reply. Win7/64, IE8, all plugins (due to testing) disabled. There may be more scenarios than the above where the same may apply (e.g. selecting a different folder than the Sent folder), but the scenario above was the one where I encountered the behaviour. Replicable? Bug or deliberate...? Cheers, -- Michael Heydekamp Co-Admin freexp.de Düsseldorf/Germany

2 4

Re: [RCU] /bin/*.sh permissions
by Grant 20 Sep '13

20 Sep '13

>>>> None of the files in /bin/ are executable on my Gentoo system. Should I file a Gentoo bug for that? - Grant >>> >>> Should they be installed executable? I used update.sh recently and >>> had to make it executable first. >>> >>> - Grant >> >> That is a standard security measure in many packages such as this, don't have anything executable unless it is >> necessary. If you need to run those scripts, make them executable > > why? > > bash /path/script.sh works > > but it does not work for standard exploits which mostly rely on > script is executeable by a direct call and most exploit does not > try to handle noexec-mounts and call the interpreter with the > script as argument and in many cases it's simply impossible > to call it this way because you don't have the full shell > for your exploit - so they fail Does the Roundcube process that checks your installation from a browser (can't remember the name) require one of these scripts to be made executable? - Grant

2 1

Shift+click & Ctrl+click in Midori
by Grant 19 Sep '13

19 Sep '13

I'm having some trouble using Ctrl+click and Shift+click in Midori when using Roundcube. Sometimes they work fine to highlight additional messages, but sometimes the message I click opens in a new tab instead. This doesn't happen in Chromium. Is it a Midori issue? - Grant

1 0

/bin/*.sh permissions
by Grant 19 Sep '13

19 Sep '13

None of the files in /bin/ are executable on my Gentoo system. Should I file a Gentoo bug for that? - Grant

3 4

Disappearing inbox in Midori
by Grant 19 Sep '13

19 Sep '13

Has anyone else tried roundcube in midori? It works very well but the list of messages in the inbox frequently disappears. It reappears by scrolling up or down. - Grant

2 3

php syntax error in cloudview
by Luciano Mannucci 18 Sep '13

18 Sep '13

Since last udate to 0.9.4 I'm getting some of these errors: PHP Parse error: syntax error, unexpected '{' in /dati/httpd/web_web_mail/mcs/plugins/cloudview/lib/openDocument.php on line 27 I'm running under apache, php 5.3.27. What should I do? Many thanks in advance, Luciano. -- /"\ /Via A. Salaino, 7 - 20144 Milano (Italy) \ / ASCII RIBBON CAMPAIGN / PHONE : +39 2 485781 FAX: +39 2 48578250 X AGAINST HTML MAIL / E-MAIL: posthamster(a)sublink.sublink.ORG / \ AND POSTINGS / WWW: http://www.lesassaie.IT/

2 2

restricitng to one domain
by Andreas Meyer 16 Sep '13

16 Sep '13

Hello! I would like to restrict roundcube to one domain and tried the following: $rcmail_config['default_host'] = '%d = anup.de'; $rcmail_config['default_host'] = '%n = mail.anup.de'; and also $rcmail_config['email_dns_check'] = true; but I don't get it. Get a connection to server failed. The log says Could not connect to anup.de = anup.de:143: php_network_getaddresses: getaddrinfo failed: Der Name oder der Dienst ist nicht bekannt in .... /program/include/rcube_imap.php on line 191 What am I missing? Greetings Andreas

4 8

Re: [RCU] restricitng to one domain
by Andreas Meyer 15 Sep '13

15 Sep '13

Reindl Harald <h.reindl(a)thelounge.net> wrote: > Am 15.09.2013 21:25, schrieb Andreas Meyer: > > Reindl Harald <h.reindl(a)thelounge.net> wrote: > > > >>> $rcmail_config['default_host'] = '%d = anup.de'; > >>> $rcmail_config['default_host'] = '%n = mail.anup.de'; > > > >> where is that a roundcube problem? > >> the IP for "anup.de" can't be resloved - period > >> fix your DNS or /etc/hosts > > > > # host anup.de > > anup.de has address 78.47.3.18 > > > > # host 78.47.3.18 > > 18.3.47.78.in-addr.arpa domain name pointer anup.de > > from where? from the server the services are running and also from outside. > keep in mind that the *webserver* roundcube running needs to > resolve it and the error suggest that this is ot the case I did a fgrep -r dns /etc/apache2 and the result was empty. Edited the /etc/hosts also with no luck. Don't know, I am a bit lost here. Andreas

1 0

Re: [RCU] restricitng to one domain
by Andreas Meyer 15 Sep '13

15 Sep '13

Reindl Harald <h.reindl(a)thelounge.net> wrote: > > $rcmail_config['default_host'] = '%d = anup.de'; > > $rcmail_config['default_host'] = '%n = mail.anup.de'; > where is that a roundcube problem? > the IP for "anup.de" can't be resloved - period > fix your DNS or /etc/hosts # host anup.de anup.de has address 78.47.3.18 # host 78.47.3.18 18.3.47.78.in-addr.arpa domain name pointer anup.de. # netstat -pantu |grep dovecot tcp 0 0 0.0.0.0:993 0.0.0.0:* LISTEN 7514/dovecot tcp 0 0 0.0.0.0:995 0.0.0.0:* LISTEN 7514/dovecot tcp 0 0 0.0.0.0:110 0.0.0.0:* LISTEN 7514/dovecot tcp 0 0 0.0.0.0:143 0.0.0.0:* LISTEN 7514/dovecot tcp 0 0 127.0.0.1:12340 0.0.0.0:* LISTEN 7514/dovecot tcp 0 0 0.0.0.0:4190 0.0.0.0:* LISTEN 7514/dovecot tcp 0 0 :::993 :::* LISTEN 7514/dovecot tcp 0 0 :::995 :::* LISTEN 7514/dovecot tcp 0 0 :::110 :::* LISTEN 7514/dovecot tcp 0 0 :::143 :::* LISTEN 7514/dovecot tcp 0 0 :::4190 :::* LISTEN 7514/dovecot Only $rcmail_config['default_host'] = 'localhost'; works. What am I missing? Andreas

1 0

htmleditor (Compose HTML messages) preference problem
by Pablo Orantes Pozo 12 Sep '13

12 Sep '13

Hi, I'm recently upgrade from Roundcube 0.8.6 to Roundcube 0.9.4 on Fedora 18. Some users complain about problem composing non-HTML messages because "Compose HTML messages" is set to always even after save configuration with a never value for this preference. I have $rcmail_config['htmleditor'] = 0; in main.inc.php and if the user haven't got "htmleditor" in his preferences field on table user it's works fine, but the problem comes when the user has any value for this preference. How to reproduce? - Check if the user has "htmleditor" in his field "preferences" on table "users" (s:10:"htmleditor";i:0;) - Change "Compose HTML messages" configuration value (in Preferences --> Composing Messages) to another value and click save button (if you reload your MySQL query to show user preferences, you could see that htmleditor value has been changed with the new value s:10:"htmleditor";i:2;) - Return to mail INBOX and reload your MySQL query, the value has been automatically changed to s:10:"htmleditor";b:1; and "Compose HTML messages" is set to "always" and if you change this value you have the same problem again. I don'tknow if it's a bug or I have any configuration problem. Can you help me? Thank you T

1 0

PGP plugin
by Andreas Meyer 10 Sep '13

10 Sep '13

Hello! Is PGP Support available for roundcube? Greetings Andreas

2 1

Update 0.9.4 release
by Thomas Bruederli 06 Sep '13

06 Sep '13

Dear Roundcube lovers! It wouldn't be Roundcube if there wasn't a minor glitch in our stable releases every now and then :-) It so happened again in the recent 0.9.3 release where the new include_path check triggered some regex warnings on Windows systems. We apologize for this inconvenience! But we're trying hard to keep up and here's a new release which fixes that nasty bug together with some other reported issues that we considered worth being ported to the 0.9 release series. It's considered stable (really!) and we recommend to update all productive installations of Roundcube with this version. Download it from http://roundcube.net/download, see the full changelog in our wiki: http://trac.roundcube.net/wiki/Changelog Kind regards, Thomas

1 0

Looking for plugin writer
by Lystopad Aleksandr 04 Sep '13

04 Sep '13

Hi, dear roundcube community. Im looking for a person, who can write a plugin for Roundcube webmail which can do next things: Add 2 buttons with descriptions for sending mail: send via 1st smtp server and send with 2nd smtp server. This two buttons must be configurable: width and height, css styles, etc. And smtp server's address also must be configurable. This plugin must work with modern verions of roundcube. My boss is willing to pay for this work within reasonable limits Please, write me private mails if you interesting with it. Thanks. -- Lystopad Aleksandr

1 0

Roundcube "hangs" in settings pages
by Tobi 22 Aug '13

22 Aug '13

Hi list I got a weird problem with my roundcube 0.9.2 installation. If I go to the settings pages and choose any menu item from the left pane (e.g. server-settings) RC hangs forever showing "loading data". The same goes for all plugins settings which have menu items in the left pane. If I click such a menu item all other links in RC are not working anymore. I have to reload the page in browser (ctrl+F5) to use RC again. Webmail itself works fine, it's just the settings pages that seem to be broken somehow in my case. Tried as well a new installation with new mysql database, but the same Thanks for any idea where to start searching tobi

2 5

Update 0.9.3 released
by Thomas Bruederli 21 Aug '13

21 Aug '13

Hello folks We can proudly announce the third service release for the stable 0.9 series of Roundcube webmail. It fixes 25 more bugs including two recently reported XSS vulnerabilities with HTML messages and signatures. Along with that, we also optimized the UI behavior for touch devices to make Roundcube work nice and smoothly on tablets running iOS or Android. It's considered stable and we recommend to update all productive installations of Roundcube with this version. Download it from http://roundcube.net/download, see the full changelog here:http://trac.roundcube.net/wiki/Changelog Kind regards, Thomas

1 0

Problem with mobile devices
by absolutely_free＠libero.it 07 Aug '13

07 Aug '13

Hi, I'm experiencing some problems in the graphical interface with mobile devices. I've tried with default theme, Classic, Larry, and also "mobile cube". I'm using RC 0.9.2 on Debian 6. Scroll dosen't work with Android browser, I cannot skip to next page, and so on Has anyone had similar problems? Problems started after upgrading from 0.8.5 Thank you very much

1 0

Question involving Mountain Lion server, Roundcube versions since 0.8.5 and including 0.9.2, and managesieve
by Matt Domenici 03 Aug '13

03 Aug '13

Hello, Since version 0.8.5 of Roundcube, the default installation of the managesieve plugin doesn't work for me. Even using the same configuration settings from versions prior results in the roundcube being unable to connect to the sieve via the managesieve plugin. After doing some checking, on my config, the various auth functions in plugins/managesieve/Net/Sieve.php that attempt to determine the server's strongest auth methods seem to return incorrect values. Worse, the plugin will gleefully ignore you specifying a particular auth method, like CRAM-MD5. In my testing, the plugin will repeatedly try DIGEST-MD5 when you specify CRAM-MD5; which I suppose would be fine except when in fact your server doesn't support it. :-) You can workaround the issue by removing the DIGEST-MD5 as a supported type in class Net_Sieve (which lives in the managesieve plugin folder, under /Net) but this seems to be a bit of a brute force mechanism to solve what should be a simple problem. I saw a couple of other users with similar issues, including one with an identical problem in the forums but no resolution. I'm fresh out of ideas on why this happening -- probably looking at the command line way too much today, any suggestions? Thanks, - Matt

2 3

Speed-ups for a slow computer?
by Grant 02 Aug '13

02 Aug '13

Can anything be done to speed up Roundcube on a Celeron 700 with 512MB RAM (maxed out) running Gentoo Linux? We're using the Chrome browser and the CPU is 95% idle when no one is logged into X. I'm getting reports of 30+ seconds to open an email. - Grant

5 14

R: Re: I: Re: R: Problem showing HTML message
by absolutely_free＠libero.it 02 Aug '13

02 Aug '13

Hi Alec, yes, in fact if I remove <body>=EF=BB=BF I can view HTML correctly. But.. why on other system it works? It's related to some PHP library issue? Thank you very much. >----Messaggio originale---- >Da: alec(a)alec.pl >Data: 02/08/2013 9.55 >A: <users(a)lists.roundcube.net> >Ogg: Re: [RCU] I: Re: R: Problem showing HTML message > >On 08/02/2013 09:37 AM, absolutely_free(a)libero.it wrote: >> I tried copy this message to other RC installation, and I've "mixed" results: > >The HTML content is malformed. > ><html><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitio= >nal//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> ><html xmlns=3D"http://www.w3.org/1999/xhtml"> >... ></body> ></html> ><!-- [[V1H92RF-B0IE2N-QMLKKQ-WLLD7M60-JI9Y2B3J-H-M2-20130708-814ce10c19]] -= >-><img height=3D"1" width=3D"1" src=3D"http://my.email.skype.com/o/V1H92RF/= >QMLKKQ/WLLD7M60/JI9Y2B3J/XBX9/52"></body></html> > >-- >Aleksander 'A.L.E.C' Machniak >LAN Management System Developer [http://lms.org.pl] >Roundcube Webmail Developer [http://roundcube.net] >--------------------------------------------------- >PGP: 19359DC1 @@ GG: 2275252 @@ WWW: http://alec.pl >_______________________________________________ >Roundcube Users mailing list >users(a)lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users >

1 0

I: Re: R: Problem showing HTML message
by absolutely_free＠libero.it 02 Aug '13

02 Aug '13

Hi Thomas, I tried copy this message to other RC installation, and I've "mixed" results: - Ubuntu 12.04.2 LTS 64bit , RC 0.8.2 , nginx , Courier IMAP ------> message appears blank - CentOS release 6.4 (Final) 32bit, RC 0.9.2 , Apache , Dovecot ------> message appears ok - CentOS release 6.3 (Final) 64 bit, RC 0.9.2 , Apache , Dovecot -------> message appears blank Thank you! >----Messaggio originale---- >Da: absolutely_free(a)libero.it >Data: 31/07/2013 20.20 >A: <thomas(a)roundcube.net> >Ogg: R: Re: [RCU] R: Problem showing HTML message > >Hi Thomas, > >thank you for your interest. > >I attach the message to you. >Best regards > >

2 1

Setting up my school's roundcube email on Mail Mac
by clara.champion＠sciencespo-lille.eu 31 Jul '13

31 Jul '13

Hello, I am very new to this. My school, Sciences Po Lille uses Roundcube Webmail for its students. I would like to be able to access my SciencesPo-Lille.eu emails on my Mail Application. I run on the latest version of Mac OS x Mountain Lion. I hope I am contacting the right mailing list. thank you in advance for your help, Clara.

3 2

expand Show More Message Headers by default?
by Florin Andrei 31 Jul '13

31 Jul '13

Using v0.9.2 I've enabled the show_additional_headers plugin, but it's almost useless since I always need to click the little arrow labeled Show More Message Headers. Is there a way to expand Show More Message Headers by default for all messages? I want that thing to be already expanded when I click on a message. I've looked through the config file, I did some google searches, but I couldn't figure out if it's possible at all. Thanks. -- Florin Andrei http://florin.myip.org/

1 0

Newbie Help
by John Linthicum 29 Jul '13

29 Jul '13

Hi everyone, I've just installed RC 0.9.2 via the bitnami RoundCube installer on a Mac OS X Server 10.8.4. Everything appeared to install correctly. When I'm presented with the RC login at http://localhost/roundcube, I'm unable to log in to any of my email accounts hosted on the server. I keep getting login failed on the login screen. I'm a complete RC newbie, and I'm unsure where to go from here. Can someone help? John

1 0

Skin migration
by Bgs 26 Jul '13

26 Jul '13

Hi all, I have an old 0.3.1 instance running, with a fully customized skin. I plan to upgrade to the latest stable RC. Is there a reasonable chance to migrate the custom skin to the new one or it has to be redone from scratch? Thanks Bgs

3 2

Installation 500 Internal Service Error
by Yasin Eroglu 25 Jul '13

25 Jul '13

Hello, Could you please help me with this? Yes I followed all installation steps correctly. Many thanks in advance, Yasin Sent from Windows Mail

1 0

Re: [RCU] Speed-ups for a slow computer?
by Grant 23 Jul '13

23 Jul '13

>>>> Can anything be done to speed up Roundcube on a Celeron 700 with 512MB >>>> RAM (maxed out) running Gentoo Linux? We're using the Chrome browser >>>> and the CPU is 95% idle when no one is logged into X. I'm getting >>>> reports of 30+ seconds to open an email. >>> >>> no - you should be happy that it runs at all on >>> hardware outperfored by years old smartphones >> >> What are the Roundcube recommended minimum specs? > > i don't know > > but a 700 MHz/512 MB machine is far below the minimum > specs of any modern operating system at all - hence > you even get not a Fedora/Ubuntu installer started > full featured on it I don't mean to call you foolish but I think that's a foolish statement. I use Gentoo which is a modern OS and the system in question surpasses the published hardware requirements for Gentoo on x86: http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=2#doc_ch… - Grant

2 1

Re: [RCU] Speed-ups for a slow computer?
by Grant 23 Jul '13

23 Jul '13

>>> but a 700 MHz/512 MB machine is far below the minimum >>> specs of any modern operating system at all - hence >>> you even get not a Fedora/Ubuntu installer started >>> full featured on it >> >> I don't mean to call you foolish but I think that's a foolish >> statement. I use Gentoo which is a modern OS and the system in >> question surpasses the published hardware requirements for Gentoo on >> x86: >> >> http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=2#doc_ch… > > but not for Fedora and other distributions - period > for the live-CD the *minimum* is 512 MB > > well, you can't expect a fast system with *minimum* requirements > it only says "it works somehow" > > and yes i have servers with 512 MB RAM assigned but they do not > run a GUI and this ones have no load I'm going to fix the problem (probably by simply switching browsers) and the system is going to run perfectly well on its current OS. - Grant

1 0

R: Problem showing HTML message
by absolutely_free＠libero.it 23 Jul '13

23 Jul '13

Hi all, I encountered the same proble with a FRESH roundcube installation (0.9.2), with a clean MySQL database. How can I debug this? Thank you! >----Messaggio originale---- >Da: absolutely_free(a)libero.it >Data: 11/07/2013 16.38 >A: <users(a)lists.roundcube.net> >Ogg: [RCU] Problem showing HTML message > >Hi, >I'm using Roundcube 0.9.2 on Debian 6.0.7. >Some users complain about problem reading HTML messages. >I think this is related to recent upgrade (from RCB 0.8.5); anyway I'm sure I >followed correct steps to upgrade webmail. >Users see message body totally white, and if you try to see the original >header, all part of the body is missing. >I've tried to copy a html message to another RC webmail (same version: 0.9.2) >and I can succesfully it correctly. > >I've no error on apache/error.log >Can you help me troubleshooting this? > >Thank you >_______________________________________________ >Roundcube Users mailing list >users(a)lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users >

3 2

Unexpected session timeouts using memcached session store
by David Carter 23 Jul '13

23 Jul '13

We are currently running a pilot Roundcube service and are expecting to go live a a couple of weeks time. Something that my users have picked up on is that idle sessions appear to time out in unpredictable ways despite the keep_alive requests fired off by the Web browser. A bit of digging over the weekend revealed a potential race condition in program/lib/Roundcube/rcube_session.php : mc_write(). (Roundcube 0.9.2). I'm happy to write the following up as a ticket on trac.roundcube.net. I wanted to make sure my analysis and proposed solution was correct first. Given the 10 minute (600 second) default session_lifetime, keep_alive requests are fired off every 300 seconds. However these may not arrive immediately, particularly if the Web browser, network or server is busy. Sessions stored in memcached expire after precisely 600 seconds unless they are refreshed. mc_write() only refreshes session entries if the following is true: ($newvars !== $oldvars || $ts - $this->changed > $this->lifetime / 2) Most of the time with a idle login session: ($this->lifetime / 2) will be 300 ($ts - $this->changed) will be a tiny fraction more than 300. However if I add some logging it becomes clear that ($ts - $this->changed) is occasionally less than 300. I imagine this happens when the previous keep_alive was stuck in transit for a fraction of a second. It is an asynchronous request and the timer for the next keep_alive doesn't wait. The mc_write() refresh on the session data is skipped when this happens. The following keep_alive is scheduled to arrive precisely the same second that the session is due to expire in memcached. If you are unlucky the keep_alive arrives just after the session has been expired, which leads a "Session is invalid or has expired" error page. This is using memcached for session storage: the problem appears to go away if I switch to using a database backend. I believe that this is because session entries stored in memcached expire after precisely 600 seconds. With a database backend sessions are expired by PHP garbage collection later on. This will add a few seconds delay, at least on a inactive system. The attached patch appears to fix the problem, using two separate approaches: 1) A lower threshold for deciding when to refresh the session entry. (I am tempted to remove the guard condition altogether and always update. There isn't any I/O cost associated with a memcached back end). 2) A slightly longer expiry time for entries stored in memcached. However I may be missing some subtlety about the refresh process. -- David Carter Email: David.Carter(a)ucs.cam.ac.uk University Computing Service, Phone: (01223) 334502 New Museums Site, Pembroke Street, Fax: (01223) 334679 Cambridge UK. CB2 3QH. --- program/lib/Roundcube/rcube_session.php-DIST 2013-07-21 12:11:49.000000000 +0100 +++ program/lib/Roundcube/rcube_session.php 2013-07-22 10:00:40.000000000 +0100 @@ -310,9 +310,9 @@ $newvars = $oldvars !== null ? $this->_fixvars($vars, $oldvars) : $vars; - if ($newvars !== $oldvars || $ts - $this->changed > $this->lifetime / 2) { + if ($newvars !== $oldvars || $ts - $this->changed > $this->lifetime / 3) { // DPC return $this->memcache->set($key, serialize(array('changed' => time(), 'ip' => $this->ip, 'vars' => $newvars)), - MEMCACHE_COMPRESSED, $this->lifetime); + MEMCACHE_COMPRESSED, $this->lifetime + 60); // DPC } return true;

2 1

PGP plugin
by Andreas Meyer 21 Jul '13

21 Jul '13

Hello! Is PGP Support availabel for roundcube? Greetings Andreas

1 0

Re: [RCU] Speed-ups for a slow computer?
by Grant 21 Jul '13

21 Jul '13

>> Can anything be done to speed up Roundcube on a Celeron 700 with 512MB >> RAM (maxed out) running Gentoo Linux? We're using the Chrome browser >> and the CPU is 95% idle when no one is logged into X. I'm getting >> reports of 30+ seconds to open an email. > > no - you should be happy that it runs at all on > hardware outperfored by years old smartphones What are the Roundcube recommended minimum specs? - Grant

1 0

Installing Roundcube on A Mac
by Frank Holmes 20 Jul '13

20 Jul '13

Hi Fellow Roundcube users can anyone help with an idiots guide to setting up round cube on my Mac Desktop - I get as far as downloading round cubemail 0.9.2 and then cannot find the install on the download - any help appreciated Regards FCH

1 0

/program/resources/blank.pdf
by Reindl Harald 15 Jul '13

15 Jul '13

/program/resources/blank.pdf this ends on machines with for good reasons no installed PDF plugin and also the firefox-js solution disabled because "okular" is set to open any PDF document outside the browser in missing plugin warnings

4 7

Choice of language on login
by Frantz de Germain 12 Jul '13

12 Jul '13

Hello, I've installed roundcube version 0.7.1-2 on an Ubuntu server 12.04. I've seen on a screen capture that it seems possible to have a drop-down list of languages on the login page, but I didn't find anywhere how to obtain this. Regards. -- Frantz de Germain Département Informatique UFR Sciences / DDN Université d'Angers

2 1

Problem showing HTML message
by absolutely_free＠libero.it 11 Jul '13

11 Jul '13

Hi, I'm using Roundcube 0.9.2 on Debian 6.0.7. Some users complain about problem reading HTML messages. I think this is related to recent upgrade (from RCB 0.8.5); anyway I'm sure I followed correct steps to upgrade webmail. Users see message body totally white, and if you try to see the original header, all part of the body is missing. I've tried to copy a html message to another RC webmail (same version: 0.9.2) and I can succesfully it correctly. I've no error on apache/error.log Can you help me troubleshooting this? Thank you

1 0

DSN (Delivery Status Notification)
by Alessandro De Zorzi 10 Jul '13

10 Jul '13

Hi all, DSN (Delivery Status Notification) feature, seems works fine in RC 0.7.2 but not in 0.7.3, someone can confirm? TIA Alessandro De Zorzi

1 0

autocomplete address from envelope addresses
by Suja Amitabh 09 Jul '13

09 Jul '13

Dear rc users, Is there any plugin that supports auto completion of ids from the envelope addresses (MAIL FROM, RCPT TO) of mails in your mailbox? The contacts which are not there in address book, but if we have received mails from them, can those ids come automatically when I compose mails? Greetings.

3 3

Managesieve Fedora 18 config
by everton rocha 05 Jul '13

05 Jul '13

hello, I use fedora 18 with rcube. I can not filter messages. I put in the plugins rcube Managesieve, but does not work. I do not know if dovecot has something to do with it. Would like help from the community. Can anyone help? regards Everton

11 42

Blank page after Login
by ɹןʇnqן 04 Jul '13

04 Jul '13

Roundcube 0.9.2 installed. Loading up the roundcube page I get a login window. I put in a user name and password and I get a blank screen. On Chrome I get "Server Error" (500). The only error I can find is: [01-Jul-2013 13:50:14 UTC] PHP Fatal error: Call to a member function kill() on a non-object in /usr/local/www/roundcube/program/include/rcmail.php on line 648 PHP 5.4.7 php5-pdo-5.4.7 php5-pdo_mysql-5.4.7 pcre-8.31_1 php5-dom-5.4.7 php5-json-5.4.7 php5-simplexml-5.4.7 php5-xml-5.4.7 php5-xmlreader-5.4.7 php5-xmlwriter-5.4.7 php.ini: error_reporting = E_ALL memory_limit = 128MB ; Maximum amount of memory a script may consume (128MB) file_uploads = On session.auto_start = 0 zend.ze1_compatibility_mode = Off ;mbstring.func_overload = 0 magic_quotes_gpc = Off magic_quotes_runtime = Off (suhosin.session.encrypt is not in my php.ini at all) I also set: php_value error_log /www/roundcube/logs/errors Before I removed the installer directory everything checked out ok, and I was even able to send a test message. -- ɹןʇnqן <mailto:lbutler@covisp.net> 303.219.0564

4 7

A simple Roundcube setup issue
by Robert Richards 03 Jul '13

03 Jul '13

Hi: I have installed Roundcube V.0.9.0 on an OSX Server running OSX 10.8.4. Roundcube is the webmail front-end to Postfix/Dovecot. Everything is working perfectly except for one thing. When an email is received which contains an image file attached, the image is replaced with a pink box in the Roundcube interface. The pink box is a gif file, and seems to be a place holder replacing the original image. This behavior is observed in all browsers: Safari, Chrome, and Firefox running under OSX and also by Internet Explorer running under Windows 8. If I bring up the same email in a regular mailer, like OSX Mail, or Thunderbird, the images display correctly the way they were sent. I have a TZ215 firewall and virus/trojan scanner, as well as additional virus scanning on the server protecting emails/images/attachments, so, having little or no concern for maleware I have set Roundcube's user preferences in Settings ==> Displaying Messages ==> Display Remote Images ==> to Always. That setting should allow Roundcube to properly display whatever image is received, but it doesn't. When I look at the raw email, I see a properly encoded email with mime-encoded attachments. Where in Roundcube's internals can I turn off/change this aberrant behavior? Thanks -- "They who would give up an essential liberty for temporary security, deserve neither liberty or security" - Benjamin Franklin

3 2

Problem with scroll (RC 0.9.2) and Android?
by absolutely_free＠libero.it 03 Jul '13

03 Jul '13

Hi, I just upgraded to 0.9.2 and since then Roundcube users fail to properly use webmail (especially scroll function) with their smartphone. With previous (0.8.5) version I had no problem. Any suggestion? Thank you!

1 0

Square parenthesis in folder names
by Luigi Rosa 03 Jul '13

03 Jul '13

Hi, I have a user with [Square parentesis] in IMAP folder names The IMAP server is the latest Dovecot. With Thunderbird the user is able to see the folders. With Roundcube he does not see the folders in the folder lists or in the folder he can subscribe. Is like the folders do not exist for Roundcube Ciao, luigi -- / +--[Luigi Rosa]-- \ A dyslexic man walks int a bra.

2 2

Auto-reply?
by Ole H.B. Andreesen 03 Jul '13

03 Jul '13

How do I set up an auto-reply - I'm on vacation and want to inform whom to turn to. I can't find out. Anyone? -- OLE H.B. ANDREESEN Journalist, leder af journalistlinjen Askov Højskole Maltvej 1, Askov 6600 Vejen Tlf: +45 51 56 55 54 E-mail: oa(a)askov-hojskole.dk www.askov-hojskole.dk [1] PRIVAT: Sdr. Kongevej 18 6000 Kolding Tlf: +45 75 50 60 20 Mobil: +45 40 36 50 21 E-mail: oleandreesen(a)gmail.com Links: ------ [1] http://www.askov-hojskole.dk

2 2

Special Characters help
by nrbrown＠expatriot.com.au 02 Jul '13

02 Jul '13

In many of my emails I need to use characters which are not on my keyboard such as currency symbols other than $. How do I do this? Nicholas Brown

4 3

Re: [RCU] [RCD] bb5d72: Use also Envelope-To for identity selection (#1488...
by Michael Heydekamp 02 Jul '13

02 Jul '13

Am 02.07.2013 21:02, schrieb Justin van Beusekom: > You can provide an patch: > > https://github.com/roundcube/roundcubemail/pulls Thanks. But if I'm getting right, this is more a patch request rather than a real and direct commit to the source, right? Cheers, -- Michael Heydekamp Co-Admin freexp.de Düsseldorf/Germany

1 0

Displaying folder names in dependence of splitter position
by Michael Heydekamp 02 Jul '13

02 Jul '13

Until a few days/weeks ago, 0.9 stable and 1.0-git behaved different in the following respect: 0.9.x: ------ When moving the vertical splitter to the left, so that the folder names couldn't be fully displayed anymore, the folder names have been shortened such as "debian-sec...announce (524)". 1.0-git: -------- When moving the vertical splitter to the left, so that the folder names couldn't be fully displayed anymore, the folder names have NOT been shortened but e.g. being displayed as "debian-security-anno" (the most right part of the folder name being truncated in the display). Today, both versions (0.9.2 [GIT 20130630.1129] and 1.0-git [GIT 20130701.1430]) behave the same as described under "1.0-git" above (folder name being truncated rather than shortened). Is this deliberate...? Browser: IE8 Cheers, -- Michael Heydekamp Co-Admin freexp.de Düsseldorf/Germany

2 4

Unable to set Sent folder to "INBOX"
by David Carter 02 Jul '13

02 Jul '13

One of my users noticed that while "INBOX" appears in the list of mailboxes listed under: Settings => Preferences => Special Folders => Sent it is not possible to select that folder for sent messages. Any attempt to do do ends up with the empty value "---". A bit of digging uncovered program/steps/settings/func.inc: $select = rcmail_mailbox_select(array( 'noselection' => '---', 'realnames' => true, 'maxlength' => 30, 'folder_filter' => 'mail', 'folder_rights' => 'w', // #1486114, #1488279 'onchange' => "if ($(this).val() == 'INBOX') $(this).val('')", # ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ )); http://trac.roundcube.net/ticket/1486114 explains the problem with Drafts, which make sense. I have pointed the user in question at Settings => Composing Messages => Place replies in the folder of the message being replied to but that isn't quite what they are looking for: they want incoming and outgoing email in a single mailbox (this is a shared account). This is with Roundcube 0.9.2, although I don't think that is particularly significant. The ticket that I refer to above is a few years old now. -- David Carter Email: David.Carter(a)ucs.cam.ac.uk University Computing Service, Phone: (01223) 334502 New Museums Site, Pembroke Street, Fax: (01223) 334679 Cambridge UK. CB2 3QH.

2 1

Installing 0.9.2
by ɹןʇnqן 30 Jun '13

30 Jun '13

After updating to php53 so that the mysql would work, I get the following when trying to goto http://<roundcube>/installer Fatal error: Call to undefined function session_start() in /usr/local/www/roundcube/installer/index.php on line 57 -- ɹןʇnqן <mailto:lbutler@covisp.net> 303.219.0564

2 4

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users