- Users - Roundcube mailing lists

[UPDATED] 7 remaining LDAP editing issues
by Achim 17 Apr '12

17 Apr '12

Hello list: Below a summarised and expanded view on the remaining 7 LDAP issues. Please discard the earlier messages in the other thread, this is the current status: 1) User-specific base_dn, bind_dn and password exist, and know to work with other clients (iOS and jxplorer). Despite the name "Public", the bind_dn user has write access. Relevant main.inc.php and slapd.conf extracts are included at the end of this message. If useful, I can also provide access to the underlying OpenLDAP developmentserver. 2) If cn and the concatenation givenName+sn are the same, the cn value does not show up in the UI mask in the "name" field. As a result, when you edit that contact, the field cn is not populated by default in the UI and has to be manually added: Forgetting to do so will result in an error, as cn is mandatory. It appears that the program logic to hide cn based on existing attributes should be reviewed. Independent of this, I believe that the thread "How are you using cn vs displayName?" [0] could be useful to determine the right approach for mapping givenName, sn, cn and displayName. 3) Probably closely related to point 2): changing the content of the field 'name' => 'cn' fails, i.e. the newly entered information is not stored. Warning: ldap_mod_replace(): Modify: Naming violation in roundcubemail-0.7.2/program/include/rcube_ldap.php on line 1105 Changing cn using jxplorer 3.2.2 works as expected. How to reproduce: 1) Change cn for a contact in jxplorer to "John Doe CN" 2) Search for John Doe CN contact in RC 3) "John Doe CN" shows up in the "name" field (in accordance with the fieldmap below): 4) Editing the contact (any field, except cn itself) works perfectly. 5) Search again for same contact. 6) Change cn/name field to "John Doe CNUPDATED" 7) Saving will fail with a "Naming violation" error. From logs/ldap (level 8, which seems to give the same output as level 4 BTW): [10-Apr-2012 01:51:21 +0200]: C: Replace [dn: cn=John Doe CN,ou=public,ou=rcabook,dc=domain,dc=tld]: Array ( [cn] => John Doe CNUPDATED [sn] => Doe [givenname] => John ) [10-Apr-2012 01:51:21 +0200]: S: Naming violation From slapd with loglevel 23: Apr 10 01:51:21 mail slapd[20444]: conn=1263 op=2 do_modify Apr 10 01:51:21 mail slapd[20444]: conn=1263 op=2 do_modify: dn (cn=John Doe CN,ou=public,ou=rcabook,dc=domain,dc=tld) Apr 10 01:51:21 mail slapd[20444]: >>> dnPrettyNormal: <cn=John Doe CN,ou=public,ou=rcabook,dc=domain,dc=tld> Apr 10 01:51:21 mail slapd[20444]: <<< dnPrettyNormal: <cn=John Doe CN,ou=public,ou=rcabook,dc=domain,dc=tld>, <cn=john doe cn,ou=public,ou=rcabook,dc=domain,dc=tld> Apr 10 01:51:21 mail slapd[20444]: conn=1263 op=2 modifications: Apr 10 01:51:21 mail slapd[20444]: #011replace: cn Apr 10 01:51:21 mail slapd[20444]: #011#011one value, length 18 Apr 10 01:51:21 mail slapd[20444]: #011replace: sn Apr 10 01:51:21 mail slapd[20444]: #011#011one value, length 16 Apr 10 01:51:21 mail slapd[20444]: #011replace: givenname Apr 10 01:51:21 mail slapd[20444]: #011#011one value, length 5 Apr 10 01:51:21 mail slapd[20444]: bdb_dn2entry("cn=john doe cn,ou=public,ou=rcabook,dc=domain,dc=tld") Apr 10 01:51:21 mail slapd[20444]: hdb_modify: cn=John Doe CN,ou=public,ou=rcabook,dc=domain,dc=tld Apr 10 01:51:21 mail slapd[20444]: bdb_dn2entry("cn=john doe cn,ou=public,ou=rcabook,dc=domain,dc=tld") Apr 10 01:51:21 mail slapd[20444]: bdb_modify_internal: 0x000004a7: cn=John Doe CN,ou=public,ou=rcabook,dc=domain,dc=tld Apr 10 01:51:21 mail slapd[20444]: bdb_modify_internal: replace cn Apr 10 01:51:21 mail slapd[20444]: bdb_modify_internal: replace sn Apr 10 01:51:21 mail slapd[20444]: bdb_modify_internal: replace givenName Apr 10 01:51:21 mail slapd[20444]: bdb_modify_internal: replace entryCSN Apr 10 01:51:21 mail slapd[20444]: bdb_modify_internal: replace modifiersName Apr 10 01:51:21 mail slapd[20444]: bdb_modify_internal: replace modifyTimestamp Apr 10 01:51:21 mail slapd[20444]: entry failed schema check: value of naming attribute 'cn' is not present in entry Apr 10 01:51:21 mail slapd[20444]: hdb_modify: modify failed (64) Apr 10 01:51:21 mail slapd[20444]: send_ldap_result: conn=1263 op=2 p=3 Apr 10 01:51:21 mail slapd[20444]: send_ldap_result: err=64 matched="" text="value of naming attribute 'cn' is not present in entry" Apr 10 01:51:21 mail slapd[20444]: send_ldap_response: msgid=3 tag=103 err=64 It appears that somehow cn is not set in the update request that is sent to the LDAP server: "Value of naming attribute 'cn' is not present in entry". Also: why are we replacing sn and givenName if only cn has changed? 4) Adding groups under the LDAP directory fails: [07-Apr-2012 22:40:47 +0200]: C: Connect [calendarserver:389] [Private] [07-Apr-2012 22:40:47 +0200]: S: OK [07-Apr-2012 22:40:47 +0200]: C: Bind [dn: cn=user(a)hostname.net,ou=private,ou=rcabook,dc=hostname,dc=tld] [pass: XXXXXXXXXXXXX] [07-Apr-2012 22:40:47 +0200]: S: OK [07-Apr-2012 22:40:47 +0200]: C: Add [dn: cn=Testgroup,cn=user(a)hostname.net,ou=private,ou=rcabook,dc=hostname,dc=tld]: Array ( [objectClass] => Array ( [0] => top [1] => groupOfNames ) [cn] => Testgroup [] => ) [07-Apr-2012 22:40:47 +0200]: S: Undefined attribute type [07-Apr-2012 22:40:47 +0200]: C: Close RESULT: Does NOT work, and we get a red error message "An error occured while saving." on top of the web page. Could this be because by default we are using the wrong object classes to create a subgroup? 5) Problems with editing and deleting facsimileTelephoneNumber and jpegPhoto fields It turns out that 'phone:fax' => 'facsimileTelephoneNumber' works for adding and editing a fax number, but you will not be able to remove or clear an existing one, at least not with the current code: Warning: ldap_mod_del(): Modify: Inappropriate matching in program/include/rcube_ldap.php on line 1082 This is actually the same issue as with the profile pictures, as you can see comparing Apr 8 03:36:28 mail slapd[25146]: bdb_modify_internal: 18 modify/delete: jpegPhoto: no equality matching rule Apr 8 03:36:28 mail slapd[25146]: send_ldap_result: err=18 matched="" text="modify/delete: jpegPhoto: no equality matching rule" and these entries: Apr 8 04:07:02 mail slapd[25146]: bdb_modify_internal: 18 modify/delete: facsimileTelephoneNumber: no equality matching rule Apr 8 04:07:02 mail slapd[25146]: send_ldap_result: err=18 matched="" text="modify/delete: facsimileTelephoneNumber: no equality matching rule" Perhaps we could add two special cases for replacing/removing facsimileTelephoneNumber and jpegPhoto? I managed to find some information on this issue [1, 2, 3] that might help solve it. 6) rcmimportreplace ('Replace the entire address book' when importing a VCF file) does not work for LDAP. The newly imported card is simply added to the existing cards, rather than replacing them all. 7) manager, assistant and department fields do not work: manager and assistant don't show up and cannot be added via "Add field..." at all, while department can be added, but upon saving the new entry the field gets emptied immediately (it appears before submission of the form). Thank you very much for managing to get to the end of this message ;-) Achim [0] <http://osdir.com/ml/ldap.umich/2006-01/msg00049.html> [1] <http://www.openldap.org/lists/openldap-technical/200907/msg00083.html> [2] <http://www.openldap.org/lists/openldap-software/200812/msg00040.html> [3] <http://www.openldap.org/lists/openldap-bugs/200304/msg00008.html> ************** configuration files ************** (If useful, I can also provide access to the underlying OpenLDAP developmentserver!) $rcmail_config['ldap_public'] = array (); $rcmail_config['ldap_public']['public'] = array( 'name' => 'Public', 'hosts' => array('calendar.domain.tld'), 'port' => 389, 'ldap_version' => 3, // using LDAPv3 # BUGBUG this is important, otherwise the bind_pass is not populated! 'user_specific' => true, 'base_dn' => 'ou=public,ou=rcabook,dc=domain,dc=tld', 'bind_dn' => 'cn=%fu,ou=private,ou=rcabook,dc=domain,dc=tld', 'bind_pass' => '', // the user login password is used 'filter' => '(objectClass=inetOrgPerson)', 'writable' => true, 'LDAP_Object_Classes' => array('top', 'inetOrgPerson'), 'LDAP_rdn' => 'mail', 'required_fields' => array('cn', 'sn', 'mail', 'givenName'), // mapping of contact fields to directory attributes 'fieldmap' => array( // Roundcube => LDAPA 'prefix' => 'title', 'name' => 'cn', 'surname' => 'sn', 'firstname' => 'givenName', 'email:work' => 'mail', 'phone:home' => 'homePhone', 'phone:work' => 'telephoneNumber', 'phone:mobile' => 'mobile', 'phone:fax' => 'facsimileTelephoneNumber', 'photo' => 'jpegPhoto', 'website' => 'labeledURI', 'street' => 'street', 'zipcode' => 'postalCode', 'locality' => 'l', 'region' => 'st', // does not exist in inetOrgPerson // 'country' => 'c', 'organization' => 'o', // Notes tab 'notes' => 'description', // Personal information tab 'manager' => 'manager', 'assistant' => 'secretary', 'department' => 'departmentNumber', ), 'search_fields' => array('mail', 'cn', 'sn', 'givenName'), // fields to search in 'sort' => 'cn', // The field to sort the listing by. 'scope' => 'sub', // search mode: sub|base|list 'fuzzy_search' => true, // server allows wildcard search 'vlv' => false, // Enable Virtual List View to more efficiently fetch paginated data (if server supports it) 'numsub_filter' => '(objectClass=organizationalUnit)', // with VLV, we also use numSubOrdinates to query the total number of records. Set this filter to get all numSubOrdinates attributes for counting 'sizelimit' => '0', // Enables you to limit the count of entries fetched. Setting this to 0 means no limit. 'timelimit' => '0', // Sets the number of seconds how long is spend on the search. Setting this to 0 means no limit. 'groups' => array( 'base_dn' => '', // in this Howto, the same base_dn as for the contacts is used 'filter' => '(objectClass=groupOfNames)', 'object_classes' => array("top", "groupOfNames"), ), ); $rcmail_config['autocomplete_addressbooks'] = array('sql','public'); $rcmail_config['address_template'] = '{street}<br/>{locality} {zipcode}<br/>{region}'; From sladp.conf: # Grant the admin and rcuser access to the whole addressbook # Also grant it to every other LDAP user access to dn.subtree="ou=rcabook,dc=domain,dc=tld" by dn="cn=admin,dc=domain,dc=tld" write by dn="cn=rcuser,ou=rcabook,dc=domain,dc=tld" write by users write

6 18

message_cache and shared folders possible bug
by CISSE Amadou 17 Apr '12

17 Apr '12

Hi, I have massage_cache turned on. I created and account and shared its mailbox readonly with some other users. When logged-in as one of those users, i try to delete messages in the mailbox without success, nice. However when i login as the mailbox owner, roundcube displays no messages. turn off message_cache and roundcube displays the messages. I also had imap_cache set to apc all the while. Thanks. -- Amadou

3 4

Fwd: message_cache and shared folders possible bug
by CISSE Amadou 17 Apr '12

17 Apr '12

---------- Forwarded message ---------- From: CISSE Amadou <cisse.amadou.9(a)gmail.com> Date: Mon, Apr 16, 2012 at 2:33 PM Subject: Re: [RCU] message_cache and shared folders possible bug To: Jeroen van Meeuwen <vanmeeuwen(a)kolabsys.com> Just to be in sync, user B is the mailbox owner and has shared it readonly with user A. On Sun, Apr 15, 2012 at 3:23 PM, Jeroen van Meeuwen <vanmeeuwen(a)kolabsys.com > wrote: > On Sunday, April 15, 2012 02:18:58 PM CISSE Amadou wrote: > > Hi, > > > > I have massage_cache turned on. I created and account and shared its > > mailbox readonly with some other users. When logged-in as one of those > > users, i try to delete messages in the mailbox without success, nice. > > > > However when i login as the mailbox owner, roundcube displays no > messages. > > turn off message_cache and roundcube displays the messages. > > > > Just curious; > > - when user A deletes messages, does user A delete only some of the > messages, > or all of the messages? > > All of the messages. When user A deleted the messages, the following error message popped up. Connection to storage server failed. The imap logs shows Permission denied in the logs: [16-Apr-2012 14:03:02 +0000]: [1515] C: A0009 UID STORE 1:* +FLAGS.SILENT (\Deleted) [16-Apr-2012 14:03:02 +0000]: [1515] S: A0009 NO Permission denied sql log when user A deleted the messages: [16-Apr-2012 14:07:43 +0000]: query(1): SELECT vars, ip, changed FROM session WHERE sess_id = '3jjb6ffvhpgh3bv7dit9huut97'; [16-Apr-2012 14:07:43 +0000]: query(1): SELECT * FROM users WHERE user_id = '7'; [16-Apr-2012 14:07:43 +0000]: query(1): SELECT vars, ip, changed FROM session WHERE sess_id = '3jjb6ffvhpgh3bv7dit9huut97'; [16-Apr-2012 14:07:43 +0000]: query(1): SELECT * FROM users WHERE user_id = '7'; [16-Apr-2012 14:07:43 +0000]: query(1): SELECT data, valid FROM cache_index WHERE user_id = '7' AND mailbox = 'Bo&AO4-tes partag&AOk-es/notifications'; [16-Apr-2012 14:07:43 +0000]: query(1): SELECT data, valid FROM cache_index WHERE user_id = '7' AND mailbox = 'Bo&AO4-tes partag&AOk-es/notifications'; [16-Apr-2012 14:07:43 +0000]: query(1): UPDATE cache_index SET data = 'O:18:"rcube_result_index":5:{s:11:"', valid = 1, changed = now() WHERE user_id = '7' AND mailbox = 'Bo&AO4-tes partag&AOk-es/notifications'; [16-Apr-2012 14:07:43 +0000]: query(1): SELECT uid, data, flags FROM cache_messages WHERE user_id = '7' AND mailbox = 'Bo&AO4-tes partag&AOk-es/notifications' AND uid IN (116,115,114,113,112,111,110,109,108,107,106,105,104,103,102,101,100,99,98,97,96,95,94,93,92,91,90,89,88,87,86,85); - when user B is displayed no messages, what is the message? Mailbox is > empty, > "No messages in selected mailbox"? > > No error messages, just an empty maillbox in the roundcube. here's the sql log when i refresh the page: [16-Apr-2012 14:09:26 +0000]: query(1): SELECT vars, ip, changed FROM session WHERE sess_id = 'q3vjgc77vsl7vk98ri607n7iv3'; [16-Apr-2012 14:09:26 +0000]: query(1): SELECT * FROM users WHERE user_id = '10'; [16-Apr-2012 14:09:26 +0000]: query(1): SELECT data, valid FROM cache_index WHERE user_id = '10' AND mailbox = 'INBOX'; and the imap log: [16-Apr-2012 14:12:24 +0000]: [F8E9] C: A0004 SELECT INBOX [16-Apr-2012 14:12:24 +0000]: [F8E9] S: * FLAGS (\Answered \Flagged \Draft \Deleted \Seen) [16-Apr-2012 14:12:24 +0000]: [F8E9] S: * OK [PERMANENTFLAGS (\Answered \Flagged \Draft \Deleted \Seen \*)] [16-Apr-2012 14:12:24 +0000]: [F8E9] S: * 32 EXISTS [16-Apr-2012 14:12:24 +0000]: [F8E9] S: * 0 RECENT In fact roundcube shows that there are 32 messages in the inbox but when i click on inbox no messages displayed, see image screenshots attached. I have roundcube check for messages every minute, so the interface goes back to inbox.png every minute. What do the (debug) logs say about this (imap, most prominently?). I reckon > of > particular interest would also be the SQL log as it contains any query > statements that might disclose what's going on, if you are able to > configure > SQL caching and reproduce this. > > Kind regards, > > Jeroen van Meeuwen > > -- > Systems Architect, Kolab Systems AG > > e: vanmeeuwen at kolabsys.com > m: +44 74 2516 3817 > w: http://www.kolabsys.com > > pgp: 9342 BF08 I disabled message_cache and roundcube displays the messages normally. Cheers. -- Amadou -- Amadou

2 4

max length of address book fields
by James Devine 17 Apr '12

17 Apr '12

Is there a way to change the max length of some of the input fields of the address book? It seems like the default is 50 and I've had some users with contacts larger than this.

2 1

Address Book issues (7.5.2)
by Michael Heydekamp 15 Apr '12

15 Apr '12

Hi there, as I already said in an earlier mail, we're in the process of moving from Squirrel to RC, for a number of good reasons (the more attractive UI of RC being the least important one). There are still some issues, though, some of them currently being show stoppers. I'm gonna post them here one by one during the next days and weeks. One of the show stoppers is the address book, which doesn't seem to work (almost) at all. Well, you can enter and edit contacts, BUT: 1) Selecting a contact in the contact list and clicking the "Compose mail to" button creates an entry in the To: field that looks like this: "real name <>" (without the quotes, of course) So the address gets lost completely, and the upper case characters of the real name are converted to lower case. 2) Clicking the "Show Address Book" button in the compose window and selecting one or more entries in the overlay window will lead to the same result as in 1), except that upper case characters of real names are not converted to lower case. But the addresses get lost as well. Furthermore, the sort order in the overlay window is different to the sort order in the address book itself: In the address book the entries are sorted by last name, the overlay window sorts them by first name (which I prefer). 3) The only thing that works flawlessly is typing the first characters of a contact name in one of the address fields of the compose window, and then selecting one of the proposed entries. As nobody else seems to have reported these issues in the list yet, I'm wondering if and what we might be doing wrong. 7.5.2 is meant to be a stable version, and I can't imagine that it has an address book implementation which is almost unusable. 4) Not a show stopper, but also not very convenient: If you limit the "Rows per page" in the Personal Settings to say 20 (because you are using the preview pane in the main window and don't want to display more mails than will fit into the space above the preview pane), then the address book does also show only 20 entries per page, although there is of course no preview pane. Is this deliberate? Can I apply a small patch that avoids this behaviour? (I'm a former Turbo Pascal programmer, but my PHP skills are pretty poor.) If more specific information about our server environment is needed, please let me know. Any help appreciated and TIA. -- Michael Heydekamp Co-Admin freexp.de Düsseldorf/Germany

4 13

Failed to load magic database at '/usr/share/misc/magic'
by Reindl Harald 10 Apr '12

10 Apr '12

hi i am relatively new to roundcube has anbody an idea what is wrong with the messages below? "/usr/share/misc" is in open_basedir and has peroper permissions Datei: „/usr/share/misc/magic“ Größe: 633267 Blöcke: 1240 EA Block: 4096 reguläre Datei Gerät: 811h/2065d Inode: 18735 Verknüpfungen: 1 Zugriff: (0644/-rw-r--r--) Uid: ( 0/ root) Gid: ( 0/ root) Zugriff : 2011-10-27 03:02:01.000000000 +0200 Modifiziert: 2011-10-27 03:02:01.000000000 +0200 Geändert : 2012-03-27 00:30:34.655927161 +0200 _________________________________ [02-Apr-2012 19:52:15 UTC] PHP Warning: finfo_open() [<a href='http://at.php.net/manual/de/function.finfo-open.php'>function.finfo-open.php</a>]: Failed to load magic database at '/usr/share/misc/magic'. in /usr/share/roundcubemail/program/include/rcube_shared.inc on line 375 [02-Apr-2012 19:53:07 UTC] PHP Warning: finfo_open() [<a href='http://at.php.net/manual/de/function.finfo-open.php'>function.finfo-open.php</a>]: Failed to load magic database at '/usr/share/misc/magic'. in /usr/share/roundcubemail/program/include/rcube_shared.inc on line 375 [02-Apr-2012 19:53:27 UTC] PHP Warning: finfo_open() [<a href='http://at.php.net/manual/de/function.finfo-open.php'>function.finfo-open.php</a>]: Failed to load magic database at '/usr/share/misc/magic'. in /usr/share/roundcubemail/program/include/rcube_shared.inc on line 375 [02-Apr-2012 19:53:56 UTC] PHP Warning: finfo_open() [<a href='http://at.php.net/manual/de/function.finfo-open.php'>function.finfo-open.php</a>]: Failed to load magic database at '/usr/share/misc/magic'. in /usr/share/roundcubemail/program/include/rcube_shared.inc on line 375 [02-Apr-2012 19:55:07 UTC] PHP Warning: finfo_open() [<a href='http://at.php.net/manual/de/function.finfo-open.php'>function.finfo-open.php</a>]: Failed to load magic database at '/usr/share/misc/magic'. in /usr/share/roundcubemail/program/include/rcube_shared.inc on line 375 [02-Apr-2012 19:55:34 UTC] PHP Warning: finfo_open() [<a href='http://at.php.net/manual/de/function.finfo-open.php'>function.finfo-open.php</a>]: Failed to load magic database at '/usr/share/misc/magic'. in /usr/share/roundcubemail/program/include/rcube_shared.inc on line 375 [02-Apr-2012 19:55:57 UTC] PHP Warning: finfo_open() [<a href='http://at.php.net/manual/de/function.finfo-open.php'>function.finfo-open.php</a>]: Failed to load magic database at '/usr/share/misc/magic'. in /usr/share/roundcubemail/program/include/rcube_shared.inc on line 375 [02-Apr-2012 19:56:02 UTC] PHP Warning: finfo_open() [<a href='http://at.php.net/manual/de/function.finfo-open.php'>function.finfo-open.php</a>]: Failed to load magic database at '/usr/share/misc/magic'. in /usr/share/roundcubemail/program/include/rcube_shared.inc on line 375

1 0

Undefined methods Mail_mime::getTXTBody() and Mail_mime::setParam()
by Achim 10 Apr '12

10 Apr '12

Hello list: After upgrading to 0.7.2, I just saw that I receive the following error messages upon trying to send a message: PHP Fatal error: Call to undefined method Mail_mime::getTXTBody() in roundcubemail-0.7.2/program/steps/mail/sendmail.inc on line 572 PHP Fatal error: Call to undefined method Mail_mime::setParam() in roundcubemail-0.7.2/program/steps/mail/func.inc on line 1462 OS is Ubuntu Lucid 10.04, and I have the following packages already installed and also tried reinstalling them: dpkg -l |grep php |grep mail ii php-mail 1.1.14-2 PHP PEAR module for sending email ii php-mail-mime 1.5.3-0.1 PHP PEAR module for creating MIME messages ii php-mail-mimedecode 1.5.0-3 PHP PEAR module to decode MIME messages Any idea what I could be missing? The exact same server was running 0.3.1 just fine, and also the 0.7.2 installer lists all requirements as present (in green). Thanks in advance, Achim

2 4

LDAP editing issues in 0.7.2 and 0.8-beta
by Achim 09 Apr '12

09 Apr '12

Hello list (and first post): I followed the excellent tutorial <http://trac.roundcube.net/wiki/Howto_Ldap> to successfully implement successfully public and private address books: importing (via abxldap), searching and browsing works "as advertised". Thank you for a great job so far :-) Next task was to use RC to edit the entries in both public and private directories. Permissions are set accordingly in slapd.conf, and editing works fine with iOS 5.0 and 5.1, and jxplorer. I enclose 5 specific (verbose) experiences with both 0.7.2 and 0.8-beta that I would like to help address: 1) Changing the cn, sn, givenname, o, and phone (mobile, home, work) fields works and updates the contact as expected: the new input is updated on the server, and existing data are preserved. However, an "Object class violation" is raised: [07-Apr-2012 03:59:37 +0200]: C: Replace [dn: cn=John Doe,ou=public,ou=rcabook,dc=hostname,dc=tld]: Array ( [cn] => John Doe [sn] => Doe [givenname] => John Doe [o] => ORIG ) [07-Apr-2012 03:59:37 +0200]: S: OK [07-Apr-2012 03:59:37 +0200]: C: Rename [dn: cn=John Doe,ou=public,ou=rcabook,dc=hostname,dc=tld] [dn: mail=john(a)acme.com] [07-Apr-2012 03:59:37 +0200]: S: Object class violation [07-Apr-2012 03:59:37 +0200]: C: Read [dn: cn=John Doe,ou=public,ou=rcabook,dc=hostname,dc=tld] [(objectclass=*)] [07-Apr-2012 03:59:37 +0200]: S: OK [07-Apr-2012 03:59:37 +0200]: C: Search [(objectClass=groupOfNames)][dn: ou=public,ou=rcabook,dc=hostname,dc=tld] [07-Apr-2012 03:59:37 +0200]: S: 0 record(s) [07-Apr-2012 03:59:37 +0200]: C: Close RESULT: Works OK, but we get a red error message "An error occured while saving." on top of the web page. 2) Adding a new contact to LDAP also works (NO exception this time): [07-Apr-2012 16:45:59 +0200]: C: Connect [calendarserver:389] [Public] [07-Apr-2012 16:46:00 +0200]: S: OK [07-Apr-2012 16:46:00 +0200]: C: Bind [dn: cn=user(a)hostname.net,ou=private,ou=rcabook,dc=hostname,dc=tld] [pass: XXXXXXXXXXXXX] [07-Apr-2012 16:46:00 +0200]: S: OK [07-Apr-2012 16:46:00 +0200]: C: Search [(&(objectClass=inetOrgPerson)(|(mail=new_contact(a)example.com)))][dn: ou=public,ou=rcabook,dc=hostname,dc=tld] [07-Apr-2012 16:46:00 +0200]: S: 0 record(s) [07-Apr-2012 16:46:00 +0200]: C: Add [dn: mail=new_contact(a)example.com,ou=public,ou=rcabook,dc=hostname,dc=tld]: Array ( [cn] => Last, First [sn] => First [givenname] => Last [mail] => new_contact(a)example.com [objectClass] => Array ( [0] => top [1] => inetOrgPerson ) ) [07-Apr-2012 16:46:00 +0200]: S: OK [07-Apr-2012 16:46:00 +0200]: C: Close 3) Adding an address does not work: [07-Apr-2012 21:29:43 +0200]: C: Replace [dn: mail=new_contact(a)example.com,ou=public,ou=rcabook,dc=hostname,dc=tld]: Array ( [cn] => Last, First [sn] => First [givenname] => Last [mail] => new_contact(a)example.com ) [07-Apr-2012 21:29:43 +0200]: S: OK [07-Apr-2012 21:29:43 +0200]: C: Add [dn: mail=new_contact(a)example.com,ou=public,ou=rcabook,dc=hostname,dc=tld]: Array ( [street] => Array ( [0] => street ) [postalcode] => Array ( [0] => zip ) [l] => Array ( [0] => place ) [c] => Array ( [0] => country ) ) [07-Apr-2012 21:29:43 +0200]: S: Object class violation [07-Apr-2012 21:29:43 +0200]: C: Read [dn: mail=new_contact(a)example.com,ou=public,ou=rcabook,dc=hostname,dc=tld] [(objectclass=*)] [07-Apr-2012 21:29:43 +0200]: S: OK [07-Apr-2012 21:29:43 +0200]: C: Search [(objectClass=groupOfNames)][dn: ou=public,ou=rcabook,dc=hostname,dc=tld] [07-Apr-2012 21:29:43 +0200]: S: 0 record(s) [07-Apr-2012 21:29:43 +0200]: C: Close In addition, I can see the following PHP error again: Warning: ldap_mod_add(): Modify: Object class violation in program/include/rcube_ldap.php on line 1116 RESULT: Does NOT work, and we get a red error message "An error occured while saving." on top of the web page. 4) Adding groups under the LDAP directory fails: [07-Apr-2012 22:40:47 +0200]: C: Connect [calendarserver:389] [Private] [07-Apr-2012 22:40:47 +0200]: S: OK [07-Apr-2012 22:40:47 +0200]: C: Bind [dn: cn=user(a)hostname.net,ou=private,ou=rcabook,dc=hostname,dc=tld] [pass: XXXXXXXXXXXXX] [07-Apr-2012 22:40:47 +0200]: S: OK [07-Apr-2012 22:40:47 +0200]: C: Add [dn: cn=Testgroup,cn=user(a)hostname.net,ou=private,ou=rcabook,dc=hostname,dc=tld]: Array ( [objectClass] => Array ( [0] => top [1] => groupOfNames ) [cn] => Testgroup [] => ) [07-Apr-2012 22:40:47 +0200]: S: Undefined attribute type [07-Apr-2012 22:40:47 +0200]: C: Close RESULT: Does NOT work, and we get a red error message "An error occured while saving." on top of the web page. In addition, the input mask for "Adress" shows 4 text boxes (street, postal, l, c fields), but the one for Region (st field) only shows a placeholder string "{region}" (no text box, just the text). 5) Contact photos that show fine in iOS and jxplorer don't show at all in the web UI. No need to be able to update the photo here, but showing the already existing contact photo would be awesome ;-) Could you please indicate whether these are know issues, and what to do about them? Again, editing etc. in iOS and jxplorer on the same LDAP directory with the same credentials works correctly in all of the above cases. Thank you in advance, Achim

3 11

mbox archive of RC mailing lists available?
by Michael Heydekamp 09 Apr '12

09 Apr '12

Hi there, is there any chance to get hold of a complete archive of the RC mailings list in original mbox format starting at, say, January 2011? I'm asking, because: We're in the process of finally kicking Squirrel and making RC our standard webmailer. There are still some show stoppers, though, but we would like to avoid raising issues which may have been discussed at length before already. I know that there is an Pipermail archive available, but that's not very convenient to read (especially as it's lacking of a search function and can be read only month by month). And the downloadable archive files in plain text format are crippled in many ways (most of the headers are missing, especially Content-Type and Charset, all non-ASCII characters are replaced with "?" and "@" with " at " , etc. pp.). So an mbox archive would really be of help. Can somebody provide this in some way? TIA, -- Michael Heydekamp Co-Admin freexp.de Düsseldorf/Germany

4 8

GD/IM requirement
by Michael Orlitzky 08 Apr '12

08 Apr '12

I notice in the install docs, we list the requirements: * PHP Version 5.2.1 or greater including - PCRE, DOM, JSON, XML, Session, Sockets (required) - libiconv (recommended) - mbstring, fileinfo, mcrypt (optional) Should GD/ImageMagick support be added to that? I noticed that distributions are doing it, and there are a few places in the code that use it.

1 0

Re: [RCU] scrollbar missing in mail list when used on mobile devices
by Ryan Horrisberger 05 Apr '12

05 Apr '12

This seems to only be an issue with Android (maybe Google will address this in a future release)--there is no way to scroll inside a window. We have lots of users using iPhones, iPod touches and even some with Windows Phone 7 with no issues. The normal skin works great as long as you know that iOS and Windows Phone 7 use two fingers to scroll inside a window (as others have pointed out). --ryan --- Ryan Horrisberger | University of Wisconsin On Thu, 29 Mar 2012 09:50:07 +0200 (CEST), Tomas Macek <macek(a)fortech.cz> wrote: > On Thu, 29 Mar 2012, mrten+roundcube(a)ii.nl wrote: > >> On 28/3/2012 14:53 , Tomas Macek wrote: >>> Hi, when I have a lot of emails in my box, I don't see scroll bar when I >>> use mobile devices (Android, iOS). The scrollbar is present when I use >>> any browser on the PC. And I cannot scroll to another mails on those >>> mobile devices, because they have touch display used for scrolling the >>> whole display, so the scrollbar is really needed. >> >> On iPad at least you can scroll the foldertree (and the mail overview, >> and the mail preview) if you start scrolling with two fingers instead of >> one (RCU 0.6). This takes some getting used to. >> >> M. > > Yes, I read about this just after the ALEC's first post in this > topic. I did not try this on iPad, but on iPhone and it seemed not to > be working well, because of the way how iPhone's touch display works. > > T. > > _______________________________________________ > Roundcube Users mailing list > users(a)lists.roundcube.net > http://lists.roundcube.net/mailman/listinfo/users

2 1

problem when I configured rouncube
by deconya 05 Apr '12

05 Apr '12

Hi I send this email to the development list, but how I don't know the activity, i repeat to this list to view If someone can help me I configured roundcube but for and accident I not activated the option to create folders when first time access the users. And now, I resolved this but more users not has the basic folders. I read that I can create it manually but in my case I need to do this automatically because there are more than 100 users affected. Exist any form to modify the code to check every time the user connects If exists the folders and If not, create it? Thanks

1 0

scrollbar missing in mail list when used on mobile devices
by Tomas Macek 29 Mar '12

29 Mar '12

Hi, when I have a lot of emails in my box, I don't see scroll bar when I use mobile devices (Android, iOS). The scrollbar is present when I use any browser on the PC. And I cannot scroll to another mails on those mobile devices, because they have touch display used for scrolling the whole display, so the scrollbar is really needed. Regards, Tomas

5 11

roundcube + confixx
by juerschen＠futzichat.de 26 Mar '12

26 Mar '12

Hallo zusammen ich sitze jetzt wirklich schon seit Stunden/Tagen an dem Problem: roundcube 0.5.1 Confixx 3.3.9-pro debian lenny und wenn ich dann http://meinedomain/roundcube/installer aufrufe bekomme ich den allseits unbeliebten http: 500 Error. Das es wohl was mit dem .htaccess zu tun hat, weiss ich mittlerweile. Ich habe es schon mit auskommentieren versucht, bis hin zum löschen der .taccess-files. weiterhin habe ich versucht, im apache2-errorlogfile was zu finden. Leider ohne Erfolg. Hat jemand von Euch den entscheidenden Tip für mich ? Vielen Dank für Eure Geduld. greetz greetz Jürschen

1 0

Commands out of sync; you can't run this command now
by Marcio Merlone 25 Mar '12

25 Mar '12

Hi folks, I am running roundcube on an Ubuntu 10.04 LTS for some years now. I have an old user which is unable to check its mails or compose new. When trying to compose a new message I get this on the error log: [19-Mar-2012 13:15:48] MDB2 Error: unknown error (-1): _doQuery: [Error message: Could not execute statement] [Last executed query: DEALLOCATE PREPARE mdb2_statement_mysql_2c2b391612904b84a62da258fe79b33e2e8ad03fc] [Native code: 2014] [Native message: Commands out of sync; you can't run this command now] [19-Mar-2012 13:15:48] MDB2 Error: unknown error (-1): _doQuery: [Error message: Could not execute statement] [Last executed query: PREPARE mdb2_statement_mysql_3b8a178a5521b8c2fe131aeea5d22f803152283fb FROM 'UPDATE session SET vars=?, changed=\'2012-03-19 13:15:48\' WHERE sess_id=?'] [Native code: 2014] [Native message: Commands out of sync; you can't run this command now] [19-Mar-2012 13:15:48 -0300]: DB Error: _doQuery: [Error message: Could not execute statement] [Last executed query: PREPARE mdb2_statement_mysql_3b8a178a5521b8c2fe131aeea5d22f803152283fb FROM 'UPDATE session SET vars=?, changed=\'2012-03-19 13:15:48\' WHERE sess_id=?'] [Native code: 2014] [Native message: Commands out of sync; you can't run this command now] in /var/www/roundcube/program/include/rcube_mdb2.php on line 293 (GET /?_task=mail&_action=compose&_reply_uid=12424&_mbox=INBOX) [19-Mar-2012 13:15:48] MDB2 Error: unknown error (-1): _doQuery: [Error message: Could not execute statement] [Last executed query: DEALLOCATE PREPARE mdb2_statement_mysql_2e8cc86bba4898aea4305b0ac268bb7f89bd09dce] [Native code: 2014] [Native message: Commands out of sync; you can't run this command now] [19-Mar-2012 13:15:48 -0300]: PHP Error: Invalid compose ID in /var/www/roundcube/program/steps/mail/compose.inc on line 52 (GET /?_task=mail&_id=1719649054f675bb43d3a7&_action=compose) I googled for this error but got zarro boogs found, I mean, no google results. I had 0.7.1 installed, he was using without any problem, and then today he started to get this error. I upgraded to 0.7.2 in a hope to solve the problem, but no luck. Can someone help me solve this or at least find what is wrong? Thanks in advance, best regards. -- *Marcio Merlone*

3 6

multiple domain
by Nelson Serafica 24 Mar '12

24 Mar '12

I'm using multiple domain in my RC $rcmail_config['default_host'][] = 'foo.com'; $rcmail_config['default_host'][] = 'fee.com'; $rcmail_config['default_host'][] = 'fuu.com'; This creates a dropdown menu on my RC. However, users could login to these three domain. Would it be possible to set users to login only in one of these domain? I'm using MySQL and users is on local system. Basically, what I only want is if I can only user USERA to have an email of USERA(a)foo.comonly. I tried the ff steps below: $rcmail_config['default_host'] = 'foo.com'; And remove $rcmail_config['default_host'][] = 'fee.com'; $rcmail_config['default_host'][] = 'fuu.com'; Add virtuser_file. $rcmail_config['virtuser_file'] = '/etc/mail/virtuser'; Contents is nelson(a)fee.com nelson. I deleted nelson on the users table of roundcubemail database. When I tried to login using nelson and compose a message, my email in the >From field is still nelson(a)foo.com. It should be nelson(a)fee.com Am I doing the right procedure?

4 4

roundcube disconnect if simultaneous login
by Nelson Serafica 24 Mar '12

24 Mar '12

I'm not sure if this is a bug in RC. I've two mail servers running RC0.7 running in Apache 2.2. If I open two webmail and login to both RC in the same browser (Google Chrome), the other session of RC get disconnected. But if I login to different browser, I don't get disconnected. This could be probably on the cookie session. I tried to check the main.inc.php but could not found any info related to my issue. Trying my luck if somebody on the list already experience this kind of issue. TIA, Nelson

6 16

New server + upgrade, lost contacts
by Josh Whitver 24 Mar '12

24 Mar '12

Hello all, I'm migrating our RoundCube from an old server to a VM, and in the process upgrading it from 0.4-beta to 0.7. I copied the MySQL database from the old server to the new server, and ran the /bin/update.sh file and let it make the database schema changes, and it seems to be basically working, but when I login to the new server, my local Address Book contacts from the old server aren't present on the new server. Am I missing some steps? Here's how it went: # ./update.sh What version are you upgrading from? Type '?' if you don't know. 0.4 WARNING: Database schema needs to be updated! Missing table 'cache_index' Missing table 'cache_thread' Missing table 'cache_messages' Missing columns in table 'contacts': words Missing table 'dictionary' Missing table 'searches' Do you want to run the update queries to get the schmea fixed? (y/N) y Indexing contacts for user 3...done. Indexing contacts for user 6...done. Indexing contacts for user 9...done. Indexing contacts for user 10...done. Indexing contacts for user 13...done. Indexing contacts for user 16...done. [...] Indexing contacts for user 606...done. This instance of Roundcube is up-to-date. Have fun! -- Josh Whitver whitverj(a)urbandale.k12.ia.us / josh(a)whitver.net The best way to make a fire with two sticks is to make sure one of them is a match.

2 3

RC Cookies
by Daniel 23 Mar '12

23 Mar '12

Is there any way that I can log into two different roundcube sessions simultaniously? Currently once I log in, if I open a new browser window and navigate to RC it uses the current sessions cookie. Using an incognito or private window in IE and Chrome works as desired but FF does not. Is there any way I can alter the code to accomplish this type of scenario in all browsers without the private windows? Thanks for your suggesions

2 1

Tagged as spam ?
by madalin 22 Mar '12

22 Mar '12

Hello, I tried registering with an account on the forum (using this email address) and i got tagged as Spam for some reason. Can anyone act on this ? Also, i'd like to help out on the romanian translation of roundcube. Thanks!:) -- Cu drag, madalin http://madalin.eu

2 1

Re: [RCU] roundcube disconnect if simultaneous login
by Martin Muskulus 19 Mar '12

19 Mar '12

Hi, > This is just how cookie sessions works. Yes and no. Session cookies (as all cookies) should be limited to the path they are valid for. >From http://www.php.net/setcookie: "The path on the server in which the cookie will be available on. If set to '/', the cookie will be available within the entire domain. If set to '/foo/', the cookie will only be available within the /foo/ directory and all sub-directories such as /foo/bar/ of domain. The default value is the current directory that the cookie is being set in." The last sentence might be false or it just doesn't work. -Martin

1 0

500 Internal Server Error - Can't figure out why
by Stephen R Guglielmo 18 Mar '12

18 Mar '12

Hey list, First, my setup: FreeBSD 9.0-RELEASE AMD64 Apache/2.2.22 PHP 5.3.10 with Suhosin-Patch roundcube-0.7.1,1 postgresql-server-9.1.3 I installed roundcube from the FreeBSD ports. I ran the install script, went through the configuration, saved my configuration files to the proper locations. It ran the test page, and everything worked fine. I tried sending a test mail, testing the connection to my database (postgresql) and imap server (dovecot). Everything worked perfectly. Then when I finished and tried to access the main roundcube directory, apache is giving me a 500 error. I have found no error logs anywhere. Not in roundcube's logs/ dir, not in apache's error log (even with LogLevel at debug), and not in my php error log. I've browsed through the Wiki about the issue, it brought up the .htaccess files. I have 'AllowOverride None' on the entire filesystem, so apache should be completely ignoring the .htaccess files. It shouldn't even be stat()'ing them. I read each of the .htaccess files in the various dirs within roundcube and I put them in my apache config file. I prefer everything to be in there as opposed to using .htaccess. I have the applicable section of my apache file pasted below. In addition to that, I put some of the main settings into my main apache config, the ETags, DEFLATE, DefaultCharset, and those other settings. If anyone has any suggestions on where to start with this, I'd appreciate it. It's driving me nuts. Thank you! -- Snip apache's config -- # Setup Permissions <Directory /> Options None AllowOverride None Order deny,allow Deny from all </Directory> Alias /mail /usr/local/www/roundcube <Directory "/usr/local/www/roundcube"> Options SymLinksIfOwnerMatch Order allow,deny Allow from my.ip.add.ress RewriteEngine On RewriteRule ^favicon.ico$ skins/default/images/favicon.ico RewriteRule .svn/ - [F] RewriteRule ^README|INSTALL|LICENSE|SQL|bin|CHANGELOG$ - [F] Header merge Cache-Control public env=!NO_CACHE AddType text/x-component .htc </Directory> <Directory "/usr/local/www/roundcube/temp"> Order allow,deny Deny from all </Directory> <Directory "/usr/local/www/roundcube/logs"> Order allow,deny Deny from all </Directory> <Directory "/usr/local/www/roundcube/plugins/enigma/home"> Order allow,deny Deny from all </Directory> <Directory "/usr/local/www/roundcube/config"> Order allow,deny Deny from all </Directory> <Directory "/usr/local/www/roundcube/program"> RewriteEngine On RewriteRule !^js|.*\.gif$ - [F] </Directory>

7 7

multiple domain
by Nelson Serafica 16 Mar '12

16 Mar '12

I have multiple domain and users is using dropdown to choose their domain. Would it be possible to restrict users to a certain domain? I have 5 domains and I need to users to have restriction based on their domain. Could anyone send a procedure or a link on how I could do that?

1 0

PHP Error: Deprecated hook name. user_preferences -> preferences_list in
by Bernics Gábor | Penta Unió Zrt. 16 Mar '12

16 Mar '12

Dear Experts, I see lot of error log entries: "Deprecated hook name. user_preferences -> preferences_list" It's an 'automatic_addressbook" plugin error, how can i repair? Gabor@Hungary

2 1

Roundcube 0.8-beta with new skin ready for testing
by Thomas Bruederli 15 Mar '12

15 Mar '12

Hello folks With the just published version 0.8-beta we proudly release the all new user interface design of Roundcube, codename "Larry" out into the wild. It isn't enabled by default but you can easily enable and test the new look by setting $rcmail_config['skin'] = 'larry'; in your local config/main.inc.php file. Many thanks again to our volunteer designer at http://bueroflint.com for the great work! Some plugins may not yet provide templates and styles for the new skin, so expect certain things to appear broken. We hereby kindly invite all plugin developers to adapt their plugins to the new skin. Said that, we'd also like to mention that Internet Explorer 6 is no longer supported from this version on. Roundcube itself still works with IE6 but the new skin doesn't and we'll officially drop IE6 support anytime soon. It has just been around for too long... Beside the new UI, this version also contains some bugfixes and improvements (see http://trac.roundcube.net/wiki/Changelog) as well as some code refactorings. These can potentially break some plugins if they use calls to renamed or refactored functions. Please watch your logs and in case you should notice any errors, please report them to the according plugin developers. In addition to the technical and visual changes, starting with this release, Roundcube is now licensed under the GNU General Public License (GPL) Version 3 or later (with exceptions for skins & plugins) as we recently announced on our website: http://roundcube.net/license. Please note that this is a beta release and we recommend to test it in a separate environment. The new skin most likely requires some more CSS hacking until we're ready for the 0.8 stable release. Please report all problems to our bug tracking system at http://trac.roundcube.net Have fun! Thomas -- List info: http://lists.roundcube.net/users/ BT/9b404e9e

5 13

poppassd hang
by Nelson Serafica 14 Mar '12

14 Mar '12

I'm using roundcube and poppassd as the plugin for the change password. It was running fine in CentOS 5.6 using poppassd rpm. However, in CentOS 6 there is no rpm yet so I compile it following the procedure on this site<http://netwinsite.com/poppassd/#Unix_Installation>. The problem is it doesn't quit after after the newpass. Password was successfully change but since it doesn't exit/quit, then the pid is stuck on the background resulting to passwd defunct process. User is confuse because there is error in roundcubemail but the password was change. Error might be result of the poppassd not exiting. Just wondering if someone from the list has manage to fix this issue or at least use a rpm for CentOS 6 or RHEL 6. TIA, Nelson

1 0

Re: [RCU] New Skin beta 0.8
by Thomas Schober 14 Mar '12

14 Mar '12

Hi, here are some screenshots posted : http://www.flickr.com/photos/roundcube/sets/72157627599045023/ Regards Tom Am 2012-03-13 14:58, schrieb Ricardo Rios - Shorewall List: > El 2012-03-13 04:58, Thomas Schober escribió: > >> Hi, >> >> i just wanted to say that it was great work with the new skin. I >> love >> it. >> Keep up the good work. >> >> Regards >> Tom >> _______________________________________________ >> Roundcube Users mailing list >> users(a)lists.roundcube.net >> http://lists.roundcube.net/mailman/listinfo/users > > Can u post a screenshoot or something ? > > Regards > > Ricardo

1 0

Migrating the mysql database
by Per Eriksson 13 Mar '12

13 Mar '12

Hello! We are right now in the process of migrating the roundcube database from one server to another, which is not working as expected. The problems we are seeing after migration is a long timeout during login, and then a message saying that the session is incorrect or have timed out. What is the correct procedure of moving the database? Perhaps we can write a short note about it? I can do that, as long as I know the details. Thanks a lot! Per

1 0

RC 0.7.2 - Taskbar buttons in compose without warning before exiting
by Valentim Branquinho 13 Mar '12

13 Mar '12

Hello, In the compose page, if you click in one of the taskbar buttons, RC 0.7.2 is not sending the warning before execute the command. In 0.6 this is working just fine. Thanks! Valentim Branquinho

2 2

New Skin beta 0.8
by Thomas Schober 13 Mar '12

13 Mar '12

Hi, i just wanted to say that it was great work with the new skin. I love it. Keep up the good work. Regards Tom

1 0

Re: [RCU] [RCD] Recognition of contributions/volunteers
by Thomas Bruederli 12 Mar '12

12 Mar '12

On Sun, Mar 11, 2012 at 19:08, Claudio Filho <filhocf(a)gmail.com> wrote: > Thomas, > > I have this doubt some time and tried to find inside o RC pages some > references about this. I also saw in Changelog, but haven't nothing > about who did what, and questions about translations updates or adds. > > Exist some place with all contributions and volunteers? > > How is recognized the efforts of who helps in this project? Hi Claudio There's an (incomplete) list of contributors in our wiki [1] (linked as "Developers/Contributors" on the main page) and to measure SVN commits you should get a look at our Ohloh project page [2]. Other than that, it's the people who post to the mailing lists and file tickets in our bug tracker and who help translate at launchpad.net ~Thomas [1] http://trac.roundcube.net/wiki/Dev_Members [2] http://www.ohloh.net/p/roundcube

1 0

Update 0.7.2 released
by Thomas Bruederli 11 Mar '12

11 Mar '12

Dear friends of Roundcube Today we can announce another release of the Roundcube webmail package. This service update adds some bug fixes and stability improvements to the 0.7 series. It also includes new settings to change how contacts are listed in the address book section. See the http://trac.roundcube.net/wiki/Changelog#Release0.7.2 file for details. We consider it stable and we recommend to update all existing Roundcube installation with this release. Download it from http://roundcube.net/download Best, Thomas P.S. In case you didn't try it yet: see Roundcube's all new user interface in action by testing the 0.8-beta version.

1 0

Domain choosing in roundcube
by Nicolas Derive 09 Mar '12

09 Mar '12

Hi, I have a mail server which serves multiple domains, and want to be able to login using only the first part of the address (for example, nicolas(a)foo.org is able to login as nicolas), even if there is multiple accounts with same first part (for example, nicolas(a)foo.com and nicolas(a)foo.org), using a dropdown list of possible domains (here @foo.org and @foo.com), in a defined order (for the most commonly used to be default and not bother users having to choose too often) Is this possible and how? Thanks a lot for your help. Have a nice day. Nicolas Derive.

2 1

Feature request: "reply using HTML"
by Jacek Osiecki 09 Mar '12

09 Mar '12

Hi, As I have checked, there still is a problem with forwarding HTML messages in roundcube. If I have option "send HTML only in reply to HTML messages" - message is forwarded correctly when I click on "reply". However, if I want to forward such a message, it doesn't work - I'm replying in plain text, and all images are just included as attachments at the bottom of message. In order to forward it correctly I have to either set "send all messages in HTML" or press "reply" and replace the recipient. I think that forward should also use HTML if we are forwarding HTML message and have "on reply to HTML message only" option selected. On the other hand, it would be nice to have dropdown option for compose, reply and forward buttons named "reply using HTML" no matter what has been set in config. Greetings, -- Jacek Osiecki Silvercube s.c. ul. Makuszyńskiego 4, 31-752 Kraków tel/fax: +48 (12) 684 21 00

2 1

R: Re: Search in all folder
by kaifamm＠libero.it 09 Mar '12

09 Mar '12

Hi, I also tried this plugin, but does not work............ Yes, it is very strange that people do not feel the need for an advanced search to search for messages, for example, in a time period or combination of fields of search as the sender or recipient or subject at the same time or in all folders. I tried to find a solution or a plugin but I found nothing of interest. Bye ----Messaggio originale---- Da: kandy71(a)gmail.com Data: 09/03/2012 10.23 A: "Roundcube Users mailing list"<users(a)lists.roundcube.net> Ogg: Re: [RCU] Search in all folder Something here I did not installed at first since the latest update was on 2009 It is strange that roundcube does not have this option Thank you again On Fri, Mar 9, 2012 at 4:18 AM, Claudio Kuenzler <ck(a)claudiokuenzler.com> wrote: Hi again, Don't bother.. it doesn't seem to work correctly, at least not with 0.7.1. I just installed it out of curiosity and tested it. In the search a new option "All Folders" appears which can be selected for the search. The search itself runs and also finds amount of messages in all folders, but they're not displayed in the main/message window. See screenshot attached. As you've already seen it, that 'plugin' doesn't seem to be maintained. Not working + not maintained = dead On Fri, Mar 9, 2012 at 9:44 AM, kandy kandy <kandy71(a)gmail.com> wrote: Yes but it seems that it is not maintained Have you tried the plugin? Thank you for everything On Fri, Mar 9, 2012 at 3:42 AM, Claudio Kuenzler <ck(a)claudiokuenzler.com> wrote: As of today, yes. But you can also wait for the update as mentioned on the website: Update coming soon that will get rid of the need for all of these additional hooks! I don't know though, since when this information is shown on the site. On Fri, Mar 9, 2012 at 9:38 AM, kandy kandy <kandy71(a)gmail.com> wrote: Thnak you for the fast reply Do I need to apply the patches? On Fri, Mar 9, 2012 at 3:21 AM, Claudio Kuenzler <ck(a)claudiokuenzler.com> wrote: You must use a plugin to do that: http://code.google.com/p/roundcubeplugin-allfoldersearch/ On Fri, Mar 9, 2012 at 9:15 AM, kandy kandy <kandy71(a)gmail.com> wrote: Hi I did not find the way to search in all folder, someone can indicate to me how to do that _______________________________________________ Roundcube Users mailing list users(a)lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users _______________________________________________ Roundcube Users mailing list users(a)lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users _______________________________________________ Roundcube Users mailing list users(a)lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users _______________________________________________ Roundcube Users mailing list users(a)lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users _______________________________________________ Roundcube Users mailing list users(a)lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users _______________________________________________ Roundcube Users mailing list users(a)lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users

2 1

Missing features: disable doubleclick, number of moved messages?
by Jacek Osiecki 09 Mar '12

09 Mar '12

Hi all, Roundcube is really great and sometimes I don't even bother to use my MUA since it's easier to run roundcube. However, there are few things that quite annoy me, and maybe I'm not the only one who is missing such functionality... 1. When I'm moving a large number of messages, I don't know how many of them are being moved. OK, I can check the number of messages in mailbox before and after, but that's not comfortable and might be misleading if some new messages arrive before I mode messages. So far I'm dealing with it by marking messages, then setting them as unread, and set as read again - but that's still much more than it should need to know how many messages I'm moving :) Isn't it possible to count the number of messages and display overall number of moved messages over the list of messages? 2. When I have dozens of new messages and I just need to mark as read, I'm clicking on them with CTRL in order to mark and then "mark as read". However, if sometimes I accidentally double click on a message, it is being opened and all messages are unmarked again. I _never_ use doubleclick - I don't need it, and if I definitely want to see the message maximized I can click on the "maximize" icon in upright corner in Subject: line. How about some possibility to disable doubleclick - the best would be to make it configurable per user, since people have various habits and some might even like it? 3. I have lots of folders in order to have data categorized as well as possible. However, there are some folders with thousands of messages, and if I have a setting of maximum 200 messages per page - it is quite hard to click maany times to get to page 25 for example. How about something like "goto page" and possibility to enter a number? It would be even nicer to have the possibility to search messages by date, but I assume this is much harder to implement... Greetings, -- Jacek -- List info: http://lists.roundcube.net/users/ BT/9b404e9e

4 6

subscription to RC forum
by kaifamm＠libero.it 09 Mar '12

09 Mar '12

I have a problem with the my subscription to RC forum. I registered two times with two different login and two different emails but I get no confirmation email. I have already written to the administrators but I have not been answered. My email is kaifamm(a)libero.it. Can you do something ? Thanks

1 0

R: Re: Call RC compose new message from external cms
by kaifamm＠libero.it 09 Mar '12

09 Mar '12

Hi, I'm writing a plugin to start composing of an email from an external script. I am using the startup , login_after and authenticate hooks. With the first and the second are able to login automatically and with the third, changing action = compose, are able to opens directly to the composition of the message. Good, everything works fine till here !!! my question is : how do I fill the fields like subject or to or cc or bcc or body or attachment ? Thanks >----Messaggio originale---- >Da: me(a)junc.org >Data: 08/03/2012 18.29 >A: <users(a)lists.roundcube.net> >Ogg: Re: [RCU] Call RC compose new message from external cms > >Den 2012-03-08 08:58, kaifamm(a)libero.it skrev: > >> I would call the RC composition of a new message from an external >> cms. > >start build a cms plugin ? > >horde did it and failed :) > > > >_______________________________________________ >Roundcube Users mailing list >users(a)lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users >

1 0

Search in all folder
by kandy kandy 09 Mar '12

09 Mar '12

Hi I did not find the way to search in all folder, someone can indicate to me how to do that

2 6

Re: [RCU] users Digest, Vol 57, Issue 9
by Bernics Gábor | Penta Unió Zrt. 09 Mar '12

09 Mar '12

Hello short question How can I insert the users signatures to the top (in messages)? Gabor@Hungary

2 1

Plugins with new Larry Skin?
by list＠airstreamcomm.net 08 Mar '12

08 Mar '12

Just wondering if any plugins have been ported to the new Larry skin (specifically the Calendar plugin)?

1 0

Call RC compose new message from external cms
by kaifamm＠libero.it 08 Mar '12

08 Mar '12

Hi All, It's me again !! I would call the RC composition of a new message from an external cms. It's possible ? How it works ? thanks Mark

2 1

main.inc.php settings in database table
by Ismail YENIGUL 08 Mar '12

08 Mar '12

Hello, Is there plugin or feature to store main.inc.php configuration to store on sql table for easy management? I see that "Admin interface for managing users and settings" feature in the roadmap "milestone:Later" Does this feature will cover this request? Thanks -- Ismail YENIGUL Team Leader / Takım Lideri SurGATE Labs Phone :+90 216-4709423 | Mobile:+90 533 747 36 65 SurGATE: West Coast Labs Premium Anti-Spam Certificated Twitter: http://www.twitter.com/surgate Blog: http://www.surgate.com/blog

1 0

R: R: R: autologin from other php page
by kaifamm＠libero.it 07 Mar '12

07 Mar '12

Hi, I found also this : /roundcube/config/main.inc.php $rcmail_config['plugins'] = array('autologon'); /roundcube/plugins/autologon/autologon.php <?php /** * Sample plugin to try out some hooks. * This performs an automatic login if accessed from localhost */ class autologon extends rcube_plugin { public $task = 'login'; function init() { $this->add_hook('startup', array($this, 'startup')); $this->add_hook('authenticate', array($this, 'authenticate')); } function startup($args) { $rcmail = rcmail::get_instance(); // change action to login if (empty($_SESSION['user_id']) && !empty($_POST['_autologin'])) $args['action'] = 'login'; return $args; } function authenticate($args) { if (!empty($_POST['_autologin'])) { $args['user'] = $_POST['_user']; $args['pass'] = $_POST['_pass']; $args['cookiecheck'] = false; $args['valid'] = true; } return $args; } } HTML: <form name="form" action="roundcube/index.php" method="post"> <input type="hidden" name="_action" value="login" /> <input type="hidden" name="_task" value="login" /> <input type="hidden" name="_autologin" value="1" /> <table border="0"> <tr> <td>username:</td> <td> <input name="_user" id="rcmloginuser" size="28" type="text" /></td> </tr> <tr> <td>Password:</td> <td> <input name="_pass" id="rcmloginpwd" size="28" type="password"/></td> </tr> <tr> <td> <input class="Button" type="submit" size="28" value="Webmail Login"/></td> </tr> </table> </form> >----Messaggio originale---- >Da: kaifamm(a)libero.it >Data: 07/03/2012 15.38 >A: <users(a)lists.roundcube.net> >Ogg: [RCU] R: R: autologin from other php page > >Hi, > > the plugin "autologin" with version 0.7.1 doesn't work !!! The logical it's >all different !! > >I made a little script in php to make autologin and it works : > ><? >require_once 'program/include/iniset.php'; >$RCMAIL = rcmail::get_instance(); >$auth= $RCMAIL->get_request_token(); >?> > ><form method="post" action="index.php" name="form"> ><input type="hidden" value="<?php echo $auth ?>" name="_token"> ><input type="hidden" value="login" name="_action"> ><input id="timezone" type="hidden" value="_default_" name="_timezone"> ><input id="url" type="hidden" name="_url"> ><input id="domain" type="hidden" value="xxxxxx.xx" name="_domainname"> ><input id="redirectdomain" type="hidden" value="xxxxxx.xx" name=" >_redirect_domain"> > ><input id="loginuser" type="text" value="" name="_user"> ><input id="loginpwd" type="password" value="" name="_pass"> ><input type="submit" value="SUBMIT"> ></form> > > > >>----Messaggio originale---- >>Da: kaifamm(a)libero.it >>Data: 06/03/2012 18.21 >>A: <users(a)lists.roundcube.net> >>Ogg: [RCU] R: autologin from other php page >> >>Hi, >> >>in my previous email I was wrong to write : the autologin plugin does NOT >>work !!! >> >>Thank you >>Mark >> >> >> >>>----Messaggio originale---- >>>Da: kaifamm(a)libero.it >>>Data: 06/03/2012 17.01 >>>A: <users(a)lists.roundcube.net> >>>Ogg: [RCU] autologin from other php page >>> >>>Hi All, >>> >>> it's me again :-) !!!!!!! >>> >>>I would use roundcube with autologin from another php script. I found the >>>plugin "autologin" but it seems to work. >>>This is my php script : >>> >>><!DOCTYPE html> >>><html> >>><head> >>></head> >>><body> >>><? >>>$_POST['password'] = 'password in clear and in plain text'; >>>$_SESSION['userpassword'] = strrev(base64_encode('*yourkey*'.$_POST >>>['password'])); >>>?> >>><form name="roundcubelogin" action="http://192.168.254.201/roundcube/? >>>_task=mail" method="post" target="roundcube"> >>><input type="hidden" name="_timezone" value="_default_" /> >>><input type="hidden" name="_task" value="mail" /> >>><input type="hidden" name="_autologin" value="1" /> >>><input type="hidden" name="_user" value="mark" /> >>><input type="hidden" name="_host" value="192.168.254.201:143" /> >>><input type="hidden" name="_pass" value="<?echo $_SESSION['userpassword']? >>" >>>/> >>><input type="submit" name="submit" value="SUBMIT" /> >>></form> >>></body> >>></html> >>> >>>The plugin autologin.php : >>> >>><?php >>> >>>/** >>> * This plugin performs an automatic login if accessed >>> * with post Data from other Site an Portal or CMS >>> * Based on sample autologon PlugIn >>> * >>> * @version 0.2 >>> * @author Eric Appelt (lacri) >>> * >>> * show into README to install and config >>> * >>> * changes >>> * 0.2 make a little bit secure with base64_encode strrev >>> * and a key thats replace after submitting encoded pass data >>> * >>> */ >>> >>>class autologin extends rcube_plugin >>>{ >>> >>> function init() >>> { >>> $this->add_hook('startup', array($this, 'startup')); >>> $this->add_hook('authenticate', array($this, 'authenticate')); >>> } >>> >>> function startup($args) >>> { >>> $rcmail = rcmail::get_instance(); >>> >>> $autologin = get_input_value('_autologin', RCUBE_INPUT_POST); >>> >>> // change action to login >>> if ($args['task'] == 'mail' && empty($args['action']) && empty ($_SESSION >>>['user_id']) && !empty($autologin)) { >>> $args['action'] = 'login'; >>> >>> // decode pass, revert and replace key >>> $_POST['_pass'] = str_replace('*yourkey*','',base64_decode(strrev >>>(get_input_value('_pass', RCUBE_INPUT_POST, true, 'ISO-8859-1')))); >>> >>> // set initial cookie without this cookie login is not possible >>> $_COOKIE['roundcube_sessid'] = session_id(); >>> } >>> return $args; >>> } >>> >>> function authenticate($args) >>> { >>> $autologin = get_input_value('_autologin', RCUBE_INPUT_POST); >>> >>> if (!empty($autologin)) { >>> $args['user'] = get_input_value('_user', RCUBE_INPUT_POST); >>> $args['pass'] = get_input_value('_pass', RCUBE_INPUT_POST); >>> $args['host'] = get_input_value('_host', RCUBE_INPUT_POST); >>> } >>> return $args; >>> } >>>} >>>_______________________________________________ >>>Roundcube Users mailing list >>>users(a)lists.roundcube.net >>>http://lists.roundcube.net/mailman/listinfo/users >>> >> >> >>_______________________________________________ >>Roundcube Users mailing list >>users(a)lists.roundcube.net >>http://lists.roundcube.net/mailman/listinfo/users >> > > >_______________________________________________ >Roundcube Users mailing list >users(a)lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users >

1 0

R: R: autologin from other php page
by kaifamm＠libero.it 07 Mar '12

07 Mar '12

Hi, the plugin "autologin" with version 0.7.1 doesn't work !!! The logical it's all different !! I made a little script in php to make autologin and it works : <? require_once 'program/include/iniset.php'; $RCMAIL = rcmail::get_instance(); $auth= $RCMAIL->get_request_token(); ?> <form method="post" action="index.php" name="form"> <input type="hidden" value="<?php echo $auth ?>" name="_token"> <input type="hidden" value="login" name="_action"> <input id="timezone" type="hidden" value="_default_" name="_timezone"> <input id="url" type="hidden" name="_url"> <input id="domain" type="hidden" value="xxxxxx.xx" name="_domainname"> <input id="redirectdomain" type="hidden" value="xxxxxx.xx" name=" _redirect_domain"> <input id="loginuser" type="text" value="" name="_user"> <input id="loginpwd" type="password" value="" name="_pass"> <input type="submit" value="SUBMIT"> </form> >----Messaggio originale---- >Da: kaifamm(a)libero.it >Data: 06/03/2012 18.21 >A: <users(a)lists.roundcube.net> >Ogg: [RCU] R: autologin from other php page > >Hi, > >in my previous email I was wrong to write : the autologin plugin does NOT >work !!! > >Thank you >Mark > > > >>----Messaggio originale---- >>Da: kaifamm(a)libero.it >>Data: 06/03/2012 17.01 >>A: <users(a)lists.roundcube.net> >>Ogg: [RCU] autologin from other php page >> >>Hi All, >> >> it's me again :-) !!!!!!! >> >>I would use roundcube with autologin from another php script. I found the >>plugin "autologin" but it seems to work. >>This is my php script : >> >><!DOCTYPE html> >><html> >><head> >></head> >><body> >><? >>$_POST['password'] = 'password in clear and in plain text'; >>$_SESSION['userpassword'] = strrev(base64_encode('*yourkey*'.$_POST >>['password'])); >>?> >><form name="roundcubelogin" action="http://192.168.254.201/roundcube/? >>_task=mail" method="post" target="roundcube"> >><input type="hidden" name="_timezone" value="_default_" /> >><input type="hidden" name="_task" value="mail" /> >><input type="hidden" name="_autologin" value="1" /> >><input type="hidden" name="_user" value="mark" /> >><input type="hidden" name="_host" value="192.168.254.201:143" /> >><input type="hidden" name="_pass" value="<?echo $_SESSION['userpassword']? >" >>/> >><input type="submit" name="submit" value="SUBMIT" /> >></form> >></body> >></html> >> >>The plugin autologin.php : >> >><?php >> >>/** >> * This plugin performs an automatic login if accessed >> * with post Data from other Site an Portal or CMS >> * Based on sample autologon PlugIn >> * >> * @version 0.2 >> * @author Eric Appelt (lacri) >> * >> * show into README to install and config >> * >> * changes >> * 0.2 make a little bit secure with base64_encode strrev >> * and a key thats replace after submitting encoded pass data >> * >> */ >> >>class autologin extends rcube_plugin >>{ >> >> function init() >> { >> $this->add_hook('startup', array($this, 'startup')); >> $this->add_hook('authenticate', array($this, 'authenticate')); >> } >> >> function startup($args) >> { >> $rcmail = rcmail::get_instance(); >> >> $autologin = get_input_value('_autologin', RCUBE_INPUT_POST); >> >> // change action to login >> if ($args['task'] == 'mail' && empty($args['action']) && empty($_SESSION >>['user_id']) && !empty($autologin)) { >> $args['action'] = 'login'; >> >> // decode pass, revert and replace key >> $_POST['_pass'] = str_replace('*yourkey*','',base64_decode(strrev >>(get_input_value('_pass', RCUBE_INPUT_POST, true, 'ISO-8859-1')))); >> >> // set initial cookie without this cookie login is not possible >> $_COOKIE['roundcube_sessid'] = session_id(); >> } >> return $args; >> } >> >> function authenticate($args) >> { >> $autologin = get_input_value('_autologin', RCUBE_INPUT_POST); >> >> if (!empty($autologin)) { >> $args['user'] = get_input_value('_user', RCUBE_INPUT_POST); >> $args['pass'] = get_input_value('_pass', RCUBE_INPUT_POST); >> $args['host'] = get_input_value('_host', RCUBE_INPUT_POST); >> } >> return $args; >> } >>} >>_______________________________________________ >>Roundcube Users mailing list >>users(a)lists.roundcube.net >>http://lists.roundcube.net/mailman/listinfo/users >> > > >_______________________________________________ >Roundcube Users mailing list >users(a)lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users >

1 0

R: Re: plugin to set forwarding in a roundcube-exim configuration
by kaifamm＠libero.it 07 Mar '12

07 Mar '12

Hi, yes it works, i'm using procmail that call sieve and also the file .forward in home directory of user. I in the .forward file call sieve so : | /usr/libexec/dovecot/deliver Bye ----Messaggio originale---- Da: gedeon007(a)gmail.com Data: 07/03/2012 11.05 A: "Roundcube Users mailing list"<users(a)lists.roundcube.net> Ogg: Re: [RCU] plugin to set forwarding in a roundcube-exim configuration Hello, Thank you for your answer. Actually we don't use sieve (I haven't heard about it yet). We are using a multi tenanted environment. We configure forwarders in the following way: we have a folder for each domains in the /etc/virtual folder and each folder contains a file called aliases. All of the forwarders for domain example.com are configured in /etc/virtual/example.com/aliases file. If I add a new alias then I only run newaliases and it's working. Do you have experiences such configuration and do you know whether this method and sieve works together? Thank you once more. Best regards, Chris 2012/3/6 Benny Pedersen <me(a)junc.org> Den 2012-03-05 16:04, Krisztián Gulyás skrev: I would like to install a plugin (or any solution) next to my roundcube-exim configuration to let my users set forwarding on their own. managesieve, if you got exim sieve working aswell from that on make a forward sieve rule in roundcube _______________________________________________ Roundcube Users mailing list users(a)lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users

2 1

plugin to set forwarding in a roundcube-exim configuration
by Krisztián Gulyás 07 Mar '12

07 Mar '12

Hi all, I would like to install a plugin (or any solution) next to my roundcube-exim configuration to let my users set forwarding on their own. Has anyone experienced something similar or could anyone help me? Thank you very much. Best regards, Chris -- List info: http://lists.roundcube.net/users/ BT/9b404e9e

2 2

R: autologin from other php page
by kaifamm＠libero.it 06 Mar '12

06 Mar '12

Hi, in my previous email I was wrong to write : the autologin plugin does NOT work !!! Thank you Mark >----Messaggio originale---- >Da: kaifamm(a)libero.it >Data: 06/03/2012 17.01 >A: <users(a)lists.roundcube.net> >Ogg: [RCU] autologin from other php page > >Hi All, > > it's me again :-) !!!!!!! > >I would use roundcube with autologin from another php script. I found the >plugin "autologin" but it seems to work. >This is my php script : > ><!DOCTYPE html> ><html> ><head> ></head> ><body> ><? >$_POST['password'] = 'password in clear and in plain text'; >$_SESSION['userpassword'] = strrev(base64_encode('*yourkey*'.$_POST >['password'])); >?> ><form name="roundcubelogin" action="http://192.168.254.201/roundcube/? >_task=mail" method="post" target="roundcube"> ><input type="hidden" name="_timezone" value="_default_" /> ><input type="hidden" name="_task" value="mail" /> ><input type="hidden" name="_autologin" value="1" /> ><input type="hidden" name="_user" value="mark" /> ><input type="hidden" name="_host" value="192.168.254.201:143" /> ><input type="hidden" name="_pass" value="<?echo $_SESSION['userpassword']?>" >/> ><input type="submit" name="submit" value="SUBMIT" /> ></form> ></body> ></html> > >The plugin autologin.php : > ><?php > >/** > * This plugin performs an automatic login if accessed > * with post Data from other Site an Portal or CMS > * Based on sample autologon PlugIn > * > * @version 0.2 > * @author Eric Appelt (lacri) > * > * show into README to install and config > * > * changes > * 0.2 make a little bit secure with base64_encode strrev > * and a key thats replace after submitting encoded pass data > * > */ > >class autologin extends rcube_plugin >{ > > function init() > { > $this->add_hook('startup', array($this, 'startup')); > $this->add_hook('authenticate', array($this, 'authenticate')); > } > > function startup($args) > { > $rcmail = rcmail::get_instance(); > > $autologin = get_input_value('_autologin', RCUBE_INPUT_POST); > > // change action to login > if ($args['task'] == 'mail' && empty($args['action']) && empty($_SESSION >['user_id']) && !empty($autologin)) { > $args['action'] = 'login'; > > // decode pass, revert and replace key > $_POST['_pass'] = str_replace('*yourkey*','',base64_decode(strrev >(get_input_value('_pass', RCUBE_INPUT_POST, true, 'ISO-8859-1')))); > > // set initial cookie without this cookie login is not possible > $_COOKIE['roundcube_sessid'] = session_id(); > } > return $args; > } > > function authenticate($args) > { > $autologin = get_input_value('_autologin', RCUBE_INPUT_POST); > > if (!empty($autologin)) { > $args['user'] = get_input_value('_user', RCUBE_INPUT_POST); > $args['pass'] = get_input_value('_pass', RCUBE_INPUT_POST); > $args['host'] = get_input_value('_host', RCUBE_INPUT_POST); > } > return $args; > } >} >_______________________________________________ >Roundcube Users mailing list >users(a)lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users >

1 0

autologin from other php page
by kaifamm＠libero.it 06 Mar '12

06 Mar '12

Hi All, it's me again :-) !!!!!!! I would use roundcube with autologin from another php script. I found the plugin "autologin" but it seems to work. This is my php script : <!DOCTYPE html> <html> <head> </head> <body> <? $_POST['password'] = 'password in clear and in plain text'; $_SESSION['userpassword'] = strrev(base64_encode('*yourkey*'.$_POST ['password'])); ?> <form name="roundcubelogin" action="http://192.168.254.201/roundcube/? _task=mail" method="post" target="roundcube"> <input type="hidden" name="_timezone" value="_default_" /> <input type="hidden" name="_task" value="mail" /> <input type="hidden" name="_autologin" value="1" /> <input type="hidden" name="_user" value="mark" /> <input type="hidden" name="_host" value="192.168.254.201:143" /> <input type="hidden" name="_pass" value="<?echo $_SESSION['userpassword']?>" /> <input type="submit" name="submit" value="SUBMIT" /> </form> </body> </html> The plugin autologin.php : <?php /** * This plugin performs an automatic login if accessed * with post Data from other Site an Portal or CMS * Based on sample autologon PlugIn * * @version 0.2 * @author Eric Appelt (lacri) * * show into README to install and config * * changes * 0.2 make a little bit secure with base64_encode strrev * and a key thats replace after submitting encoded pass data * */ class autologin extends rcube_plugin { function init() { $this->add_hook('startup', array($this, 'startup')); $this->add_hook('authenticate', array($this, 'authenticate')); } function startup($args) { $rcmail = rcmail::get_instance(); $autologin = get_input_value('_autologin', RCUBE_INPUT_POST); // change action to login if ($args['task'] == 'mail' && empty($args['action']) && empty($_SESSION ['user_id']) && !empty($autologin)) { $args['action'] = 'login'; // decode pass, revert and replace key $_POST['_pass'] = str_replace('*yourkey*','',base64_decode(strrev (get_input_value('_pass', RCUBE_INPUT_POST, true, 'ISO-8859-1')))); // set initial cookie without this cookie login is not possible $_COOKIE['roundcube_sessid'] = session_id(); } return $args; } function authenticate($args) { $autologin = get_input_value('_autologin', RCUBE_INPUT_POST); if (!empty($autologin)) { $args['user'] = get_input_value('_user', RCUBE_INPUT_POST); $args['pass'] = get_input_value('_pass', RCUBE_INPUT_POST); $args['host'] = get_input_value('_host', RCUBE_INPUT_POST); } return $args; } }

1 0

R: Re: R: Re: Ldap Addressbook : problem for credentials in private addressbook
by kaifamm＠libero.it 06 Mar '12

06 Mar '12

Hi, Thank you for the tips !!!! I found the solution !!!!!!!! Yes in the script rcabook-setup.sh there is not the creation of single users for private addressbook !!! So I made a script ( rc_create_user.sh) that create users in ldap server for private addressbook. This script must run for each ldap users. #!/bin/bash # Parameters : USER PASSWORD # example : rc_create_user.sh mark xxxx # #------------ parameters start -------------------------------- if [ $# -lt 2 ] ; then echo "ERROR - Number of parameters is wrong. Example: rc_create_user.sh user password" exit 1 fi abook_user=$1; abook_pass=$2; #------------ parameters end -------------------------------- #------------ configuration start -------------------------------- server="ldap://localhost:389"; suffix="dc=localhost"; rootdn="cn=admin,$suffix"; abook_name="rcabook"; subdir_public="public"; subdir_private="private"; base_dn="ou=$subdir_private,ou=$abook_name,$suffix"; bind_dn="cn=$abook_user,$base_dn"; bind_pass="$abook_pass"; #------------ configuration end -------------------------------- echo " dn: $bind_dn cn: $abook_user userPassword: `slappasswd -s $abook_pass` objectClass: organizationalRole objectClass: simpleSecurityObject " | ldapadd -x -c -H $server -D $rootdn -W 2> /dev/null || { echo "ERROR-unable to create user!"; exit 1; }; >----Messaggio originale---- >Da: andudi(a)gmx.ch >Data: 05/03/2012 20.03 >A: "kaifamm(a)libero.it"<kaifamm(a)libero.it>, "Roundcube Users mailing list" <users(a)lists.roundcube.net> >Ogg: Re: [RCU] R: Re: Ldap Addressbook : problem for credentials in private addressbook > >Well. the script was written before private abooks was added... ACL is not checked for that yet >But have you created the user? Can you show the output of ldapsearch? >I have not yet scanned yor slapd log... will do that at home > >Andreas > > > >"kaifamm(a)libero.it" <kaifamm(a)libero.it> schrieb: > >>Hi All, >> >> thanks for the answers !!! >> >>I made other tests : >> >>If I try this : ldapsearch -xLLL -H ldap://localhost:389 -D cn=rcuser, >>ou=rcabook,dc=localhost -w rcpass -b ou=rcabook,dc=localhost >>it works fine. >> >>If I try this : ldapsearch -xLLL -H ldap://localhost:389 -D cn=mark, >>ou=private,ou=rcabook,dc=localhost -w xxxx >>It answer : ldap_bind: Invalid credentials (49), >>so I think that there is an ACL problem. >> >>I think that there is an error in the script rcabook-setup.sh. >> >>I did run and run again the script rcabook-setup.sh, it doesn't return >>errors and it said : >>The LDAP addressbook is ready now for using: >> base_dn: ou=rcabook,dc=localhost >> bind_dn: cn=rcuser,ou=rcabook,dc=localhost >> >>Use the following command for reading and checking your setup: >> ldapsearch -xLLL -H ldap://localhost:389 -D cn=rcuser,ou=rcabook, >>dc=localhost -w rcpass -b ou=rcabook,dc=localhost >> >>I report my ldap.log with the debug of ldap server : >> >>daemon: activity on: >>slap_listener_activate(7): >>daemon: epoll: listen=7 busy >>daemon: epoll: listen=8 active_threads=0 tvp=zero >>>>> slap_listener(ldap:///) >>daemon: listen=7, new connection on 13 >>daemon: activity on 1 descriptor >>daemon: activity on: >>daemon: epoll: listen=7 active_threads=0 tvp=zero >>daemon: epoll: listen=8 active_threads=0 tvp=zero >>daemon: added 13r (active) listener=(nil) >>daemon: activity on 1 descriptor >>conn=21 fd=13 ACCEPT from IP=127.0.0.1:45320 (IP=0.0.0.0:389) >>daemon: activity on: 13r >>daemon: read active on 13 >>daemon: epoll: listen=7 active_threads=0 tvp=zero >>connection_get(13) >>daemon: epoll: listen=8 active_threads=0 tvp=zero >>connection_get(13): got connid=21 >>connection_read(13): checking for input on id=21 >>ber_get_next >>ldap_read: want=8, got=8 >>0000: 30 84 00 00 00 3e 02 01 0....>.. >> >>ldap_read: want=60, got=60 >>0000: 01 60 84 00 00 00 35 02 01 03 04 2a 63 6e 3d 6d >>.`....5....*cn=m >>0010: 61 72 6b 2c 6f 75 3d 70 72 69 76 61 74 65 2c 6f >>ark,ou=private,o >>0020: 75 3d 72 63 61 62 6f 6f 6b 2c 64 63 3d 6c 6f 63 >>u=rcabook,dc=loc >>0030: 61 6c 68 6f 73 74 80 04 78 78 78 78 alhost..xxxx >> >>ber_get_next: tag 0x30 len 62 contents: >>ber_dump: buf=0xa0b040a8 ptr=0xa0b040a8 end=0xa0b040e6 len=62 >>0000: 02 01 01 60 84 00 00 00 35 02 01 03 04 2a 63 6e >>...`....5....*cn >>0010: 3d 6d 61 72 6b 2c 6f 75 3d 70 72 69 76 61 74 65 >>=mark,ou=private >>0020: 2c 6f 75 3d 72 63 61 62 6f 6f 6b 2c 64 63 3d 6c >>,ou=rcabook,dc=l >>0030: 6f 63 61 6c 68 6f 73 74 80 04 78 78 78 78 >>ocalhost..xxxx >>op tag 0x60, time 1330963449 >>ber_get_next >>ldap_read: want=8 error=Resource temporarily unavailable >>conn=21 op=0 do_bind >>ber_scanf fmt ({imt) ber: >>ber_dump: buf=0xa0b040a8 ptr=0xa0b040ab end=0xa0b040e6 len=59 >>0000: 60 84 00 00 00 35 02 01 03 04 2a 63 6e 3d 6d 61 >>`....5....*cn=ma >>0010: 72 6b 2c 6f 75 3d 70 72 69 76 61 74 65 2c 6f 75 >>rk,ou=private,ou >>0020: 3d 72 63 61 62 6f 6f 6b 2c 64 63 3d 6c 6f 63 61 >>=rcabook,dc=loca >>0030: 6c 68 6f 73 74 80 04 78 78 78 78 lhost..xxxx >> >>ber_scanf fmt (m}) ber: >>ber_dump: buf=0xa0b040a8 ptr=0xa0b040e0 end=0xa0b040e6 len=6 >>0000: 00 04 78 78 78 78 ..xxxx >> >>>>> dnPrettyNormal: <cn=mark,ou=private,ou=rcabook,dc=localhost> >>=> ldap_bv2dn(cn=mark,ou=private,ou=rcabook,dc=localhost,0) >><= ldap_bv2dn(cn=mark,ou=private,ou=rcabook,dc=localhost)=0 >>=> ldap_dn2bv(272) >><= ldap_dn2bv(cn=mark,ou=private,ou=rcabook,dc=localhost)=0 >>=> ldap_dn2bv(272) >><= ldap_dn2bv(cn=mark,ou=private,ou=rcabook,dc=localhost)=0 >><<< dnPrettyNormal: <cn=mark,ou=private,ou=rcabook,dc=localhost>, >><cn=mark, >>ou=private,ou=rcabook,dc=localhost> >>conn=21 op=0 BIND dn="cn=mark,ou=private,ou=rcabook,dc=localhost" >>method=128 >>do_bind: version=3 dn="cn=mark,ou=private,ou=rcabook,dc=localhost" >>method=128 >>==> bdb_bind: dn: cn=mark,ou=private,ou=rcabook,dc=localhost >>bdb_dn2entry("cn=mark,ou=private,ou=rcabook,dc=localhost") >>=> bdb_dn2id("cn=mark,ou=private,ou=rcabook,dc=localhost") >><= bdb_dn2id: get failed: DB_NOTFOUND: No matching key/data pair found >>(-30988) >>send_ldap_result: conn=21 op=0 p=3 >>send_ldap_result: err=49 matched="" text="" >>send_ldap_response: msgid=1 tag=97 err=49 >>ber_flush2: 22 bytes to sd 13 >>0000: 30 84 00 00 00 10 02 01 01 61 84 00 00 00 07 0a >>0........a...... >>0010: 01 31 04 00 04 00 .1.... >> >>ldap_write: want=22, written=22 >>0000: 30 84 00 00 00 10 02 01 01 61 84 00 00 00 07 0a >>0........a...... >>0010: 01 31 04 00 04 00 .1.... >> >>conn=21 op=0 RESULT tag=97 err=49 text= >>daemon: activity on 1 descriptor >>daemon: activity on: >>daemon: epoll: listen=7 active_threads=0 tvp=zero >>daemon: epoll: listen=8 active_threads=0 tvp=zero >>daemon: activity on 1 descriptor >>daemon: activity on: 13r >>daemon: read active on 13 >>daemon: epoll: listen=7 active_threads=0 tvp=zero >>connection_get(13) >>daemon: epoll: listen=8 active_threads=0 tvp=zero >>connection_get(13): got connid=21 >>connection_read(13): checking for input on id=21 >>ber_get_next >>ldap_read: want=8, got=0 >> >>ber_get_next on fd 13 failed errno=0 (Success) >>connection_read(13): input error=-2 id=21, closing. >>connection_closing: readying conn=21 sd=13 for close >>connection_close: conn=21 sd=13 >>daemon: activity on 1 descriptor >>daemon: removing 13 >>daemon: activity on: >>conn=21 fd=13 closed (connection lost) >>daemon: epoll: listen=7 active_threads=0 tvp=zero >>daemon: epoll: listen=8 active_threads=0 tvp=zero >> >> >> >>Thanks a lot >>Mark >> >>>----Messaggio originale---- >>>Da: andudi(a)gmx.ch >>>Data: 05/03/2012 14.09 >>>A: "kaifamm(a)libero.it"<kaifamm(a)libero.it>, <users(a)lists.roundcube.net> >>>Ogg: Re: [RCU] Ldap Addressbook : problem for credentials in private >>addressbook >>> >>>Hei >>>I am i ski hollydays and have not my setup in front. >>> >>>Your setup seems ok, but can you try to connect with ldapsearch on the >> >>commandline? >>>Another try could be to switch on logging in slapd.conf >>>Ldap.conf is not used by server but by clients like ldapsearch... >>> >>>Andreas >>> >>> >>> >>>"kaifamm(a)libero.it" <kaifamm(a)libero.it> schrieb: >>> >>>>Hi All, >>>> >>>>I configured the ldap server and roundcube to manage contacts. I used >>>>the >>>>howto : http://trac.roundcube.net/wiki/Howto_Ldap. It work quite, I >>>>have only >>>>a problem for credentials in private addressbook. The public >>>>addressbook works >>>>fine, I can search and add contacts. >>>> >>>>I checked the Mark's password and it is correct. I tried to use >>rootpw >>>>but it >>>>doesn't works. >>>> >>>>My versions are : >>>>openldap-servers-2.4.19-6 >>>>php-5.3.3-1 >>>>roundcube 0.7.1 >>>> >>>>I report the error in ldap log of rouncube, my slapd.conf and my >>>>main.inc.php. >>>> >>>>Thanks a lot >>>> >>>>Mark >>>> >>>>-------------------------------- >>>>logs/ldap : >>>> >>>>[05-Mar-2012 10:09:01 +0100]: C: Connect [localhost:389] >>>>[05-Mar-2012 10:09:01 +0100]: S: OK >>>>[05-Mar-2012 10:09:01 +0100]: C: Bind [dn: >>>>cn=mark,ou=private,ou=rcabook, >>>>dc=localhost] [pass: xxxx] >>>>[05-Mar-2012 10:09:01 +0100]: S: Invalid credentials >>>>[05-Mar-2012 10:09:01 +0100]: C: Close >>>> >>>> >>>>[05-Mar-2012 10:14:24 +0100]: C: Connect [localhost:389] >>>>[05-Mar-2012 10:14:24 +0100]: S: OK >>>>[05-Mar-2012 10:14:24 +0100]: C: Bind [dn: >>>>cn=mark,ou=private,ou=rcabook, >>>>dc=localhost] [pass: xxxx] >>>>[05-Mar-2012 10:14:24 +0100]: S: Invalid credentials >>>>[05-Mar-2012 10:14:24 +0100]: C: Close >>>>[05-Mar-2012 10:27:42 +0100]: C: Connect [localhost:389] >>>>[05-Mar-2012 10:27:42 +0100]: S: OK >>>>[05-Mar-2012 10:27:42 +0100]: C: Bind [dn: >>>>cn=mark,ou=private,ou=rcabook, >>>>dc=localhost] [pass: xxxx] >>>>[05-Mar-2012 10:27:42 +0100]: S: Invalid credentials >>>>[05-Mar-2012 10:27:42 +0100]: C: Close >>>>[05-Mar-2012 10:27:52 +0100]: C: Connect [localhost:389] >>>>[05-Mar-2012 10:27:52 +0100]: S: OK >>>>[05-Mar-2012 10:27:52 +0100]: C: Bind [dn: >>>>cn=mark,ou=private,ou=rcabook, >>>>dc=localhost] [pass: xxxx] >>>>[05-Mar-2012 10:27:52 +0100]: S: Invalid credentials >>>>[05-Mar-2012 10:27:52 +0100]: C: Add [dn: >>mail=ssssss(a)iiii.uu,cn=mark, >>>>ou=private,ou=rcabook,dc=localhost]: Array >>>>( >>>> [cn] => ssssssss sss >>>> [sn] => sss >>>> [givenname] => ssssssss >>>> [mail] => ssssss(a)iiii.uu >>>> [objectClass] => Array >>>> ( >>>> [0] => top >>>> [1] => inetOrgPerson >>>> ) >>>> >>>>) >>>> >>>>[05-Mar-2012 10:27:52 +0100]: S: Strong(er) authentication required >>>>[05-Mar-2012 10:27:52 +0100]: C: Close >>>>------------------------------------------------------------ >>>>config/main.inc.php >>>> >>>>$rcmail_config['ldap_public']['public'] = array( >>>> 'name' => 'Public LDAP Addressbook', >>>> 'hosts' => array('localhost'), >>>> 'use_tls' => >_______________________________________________ >Roundcube Users mailing list >users(a)lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users >

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users