- Users - Roundcube mailing lists

Threaded message view
by Daniel Spies 11 Mar '08

11 Mar '08

Hi list, I already asked before some time, but still couldn't get a solution. In fact it's hard to read a mailing list through RoundCube. What I (and probably many others) need is the option to switch to threaded message view inside a folder of my IMAP account. The normal view is very perfect for all incoming mail, but for mailing lists I need something like this : http://typo3.org/fileadmin/dl/newsgroups/thread.gif Any ideas? Thanks, Daniel _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

how to change connection interval
by A.L.E.C 11 Mar '08

11 Mar '08

Hi! I want to increase interval between page refreshes (imap connections), so can I do this in "config" way? $rcmail_config['session_lifetime'] = 10; $rcmail_config['keep_alive'] = 300; // added by me $rcmail_config['javascript_config'] = array('read_when_deleted', 'flag_for_deletion', 'keep_alive'); It's good or bad? What about draft_autosave and session_lifetime when are set to smaller values than keep_alive? Should I worry about that? Regards -- Aleksander 'A.L.E.C' Machniak http://alec.pl gg:2275252 LAN Management System Developer http://lms.org.pl _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

installation de roundcune
by burinho＠yahoo.fr 11 Mar '08

11 Mar '08

Bonjour, je suis nouveau sur cette liste, voilà j'essaye désespérement d'installé roundcube mais je tombe sur cette erreur DATABASE ERROR: CONNECTION FAILED! Unable to connect to the database! Please contact your server-administrator. je suis debian etch et j'utilise postgressql En mode console via la commande \c -utilisteur j'arrive à me connecter et sur l'interface pgphpadmin aussi. merci pour votre aide _______________________________________________ List info: http://lists.roundcube.net/users/

4 6

Problem for attachement display
by Jean-Christian BEDIER 10 Mar '08

10 Mar '08

Hello, Tomorrow i decided install roundcube, and all work fine during installation with installer. But i have a problem with attachement: In fact it's not possible display .jpeg .png etc Whereas i have install imagick and php5 gd. Someone can help me? Thanks for your help ! _______________________________________________ List info: http://lists.roundcube.net/users/

1 1

[Help] courier-authlib-mysql configure for Roundcube-0.1 stable.
by Zhang Huangbin 06 Mar '08

06 Mar '08

Hi, all. I'm testing Roundcube-0.1 stable, but i'm confused how to configure courier-authlib-mysql for roundcube. Can anybody mail me your authmysqlrc file or paste here? Thanks very much. ---- Best Regards. Zhang Huangbin 2008.03.06 - OpenBSD 4.2 -release, i386. - RHEL 5.1 Client _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Proposed gigo.com maintenance 3/22 and 3/23
by jfesler＠gigo.com 06 Mar '08

06 Mar '08

This is to notify you that on 3/22 and 3/23, certain services that you have available to you will be affected. - SCA folks: goldenrivers.org, betonywood.org email addresses will be delayed; your web sites down during the maintenance. - gigo.com ssh/mail/web: mail delayed, web site down - Mailing lists - mail will be delayed. Mail will not be lost but may be delayed, for email addresses hosted here. Details are at: http://gigo.com/archives/announcements/proposed-downtime-322-323.html If the timing of this downtime impacts you for business reasons, contact me. Jason Fesler "the guy" @ gigo.com Mail domains affected: betonywood.org corvette-resto.com deepfried.us gigo.com goldenrivers.org lists.gigo.com lists.roundcube.net sawdusters.org starrynyte.com suchter.com wakelee.com yersinia.com + any domains I "MX" for (you know who you are!). _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

RoundCube Webmail 0.1-stable released
by Thomas Bruederli 05 Mar '08

05 Mar '08

Dear subscribers After more than two years of development we're proud to announce the first stable version of RoundCube Webmail. It's not as feature rich as we'd like it to be but the released version is considered to run stable for a productive environment. Thanks to our users we fixed many bugs and added some nice new features since the first 0.1-alpha version was published in 2005. So go ahead and upgrade your installations now! Download the latest release from http://roundcube.net/downloads A more or less complete list of changes is available at http://trac.roundcube.net/wiki/Changelog The TinyMCE-based HTML message composition is now included but should still be considered as experimental. Please also note that this is the last release that runs on PHP 4. As suggested by the GoPHP5 project RoundCube will be PHP 5 only in future versions. If you want to report bugs, please use our tracker but read the instructions (http://trac.roundcube.net/wiki/Howto_ReportIssues) first. Have fun! ~Thomas _______________________________________________ List info: http://lists.roundcube.net/users/

3 3

Regressions in trunk (vs. rc2)?
by kraymer 03 Mar '08

03 Mar '08

Hello everyone, today I played around and upgraded to today's svn trunk version of roundcube. I was really curious since I read that there are only two tickets left til roundcube will go stable. Anyway, I was kinda disappointed. I only tested a little but the overall impression is that it will work worse than what I'm used to with the rc2 version. Especially two things are annoying: 1. The new mark-as flag menu popup does not work. Instead, the "as read"/"as unread" is displayed all the time, scrambling the message subject line of the first message in the current folder. Clicking the links doesn't work either. (I could provide a screenshot for that.) 2. Message marking broken; clicking on single messages doesn't mark the message visually. Unfortunately I just notice that I didn't test if the functionality would work. I didn't open any tickets yet, maybe it is known? Since I don't provide a patch nor did regression testing by svn version I didn't dare writing to the dev-list ;) Since all lists are rather low traffic I hope it will reach you developers anyway. For now I svn switched back to rc2 but I volunteer to do some testing or test patches if necessary. Hope that all helps, Sebastian _______________________________________________ List info: http://lists.roundcube.net/users/

3 7

first attempt at install - Internal Server Error
by Ross Hulford 29 Feb '08

29 Feb '08

http://edinburghnights.co.uk/roundcube/ The error log says.. [Fri Feb 29 10:56:10 2008] [error] [client 87.81.42.122] File does not exist: /home/edinburg/public_html/500.shtml [Fri Feb 29 10:56:10 2008] [error] [client 87.81.42.122] SoftException in Application.cpp:239: Directory "/home/edinburg/public_html/roundcube" is writeable by group [Fri Feb 29 10:54:57 2008] [error] [client 87.81.42.122] File does not exist: /home/edinburg/public_html/500.shtml [Fri Feb 29 10:54:57 2008] [error] [client 87.81.42.122] SoftException in Application.cpp:239: Directory "/home/edinburg/public_html/roundcube" is writeable by group [Fri Feb 29 10:54:56 2008] [error] [client 87.81.42.122] File does not exist: /home/edinburg/public_html/500.shtml [Fri Feb 29 10:54:56 2008] [error] [client 87.81.42.122] SoftException in Application.cpp:239: Directory "/home/edinburg/public_html/roundcube" is writeable by group [Fri Feb 29 10:54:55 2008] [error] [client 87.81.42.122] File does not exist: /home/edinburg/public_html/500.shtml [Fri Feb 29 10:54:55 2008] [error] [client 87.81.42.122] SoftException in Application.cpp:239: Directory "/home/edinburg/public_html/roundcube" is writeable by group [Fri Feb 29 10:54:54 2008] [error] [client 87.81.42.122] File does not exist: /home/edinburg/public_html/500.shtml Any help would be welcome. R. _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

Big mails
by Armindo Silva 29 Feb '08

29 Feb '08

Hi there! I have a problem with mails bigger than 1MG, when i open them all i get is a blank page. I thought it was a php problem, but i increased the memory limit to 32mg and it didn't work.. Any ideas? Cumps Armindo -- -- "The only way of discovering the limits of the possible is to venture a little way past them into the impossible." Sir Arthur C. Clarke _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Inline attachments
by Patrick Zaloum 22 Feb '08

22 Feb '08

I have just noticed an odd behavior: If you have an e-mail with an attachment, a window appears and says : "Loading Data..." until the attachment is downloaded and then i assume normally it is automatically downloaded. However, in the case of known filetypes such as PDF where acrobat will open it in the browser, the pdf appears in the little "Loading Data" frame which is about 3x2" .. definately not enough to view a pdf file. Does anyone have any thoughts about this behavior? _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

taskbar button
by aux 21 Feb '08

21 Feb '08

Hi, i'm using roundcubemail-0.1-rc2 (i upgraded from version 0.1-beta). apparently all works ok except the icons of taskbar. I added two customized icons (vacation and change-password) but the text of icons not show, i see only the image. My configuration for do this: program/localization/es/labels.inc (i configured roundcube with spanish language) [...] $labels['change_password'] = 'Cambiar password'; $labels['vacation'] = 'Vacation E-mail'; [...] skins/my-skin/includes/taskbar.html (i also configured $rcmail_config['skin_path'] = 'skins/my-skin/';) [...] <a class="button-change-password" onclick="window.open(this.href); return false" href="https://my-tool-for-change-password.html"><?php echo htmlspecialchars(rcube_label("change_password")) ?></a> <a class="button-vacation" onclick="window.open(this.href); return false" href="https://my-tool-for-vacation.html"><?php echo htmlspecialchars(rcube_label("vacation")) ?></a> [...] Previus version of roundcube works ok with this configuration i have been able show the text os icons with the following lines: <roundcube:button command="change_password" label="change_password" class="button-change-password" onclick="window.open(this.href); return false" href="https://my-tool-for-change-password.html"/> <roundcube:button command="vacation" label="vacation" class="button-vacation" onclick="window.open(this.href); return false" href="https://my-tool-for-vacation.html"/></a> but when doing 'click' to the icons doesn't happen anything Why with previus versions of roundcube works ok ? Anyone help me? thanks _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

Re: [RCU] [RCD] Default Login Page
by daniel＠nullroutes.com 21 Feb '08

21 Feb '08

till wrote: > On Feb 6, 2008 9:47 PM, daniel(a)nullroutes.com <daniel(a)nullroutes.com> wrote: > >> (...) >> I don't suppose anyone could help me locate the required section of code >> so I can edit. >> > > In trunk: > <http://trac.roundcube.net/browser/trunk/roundcubemail/index.php#L173> > > The code has pretty good inline documentation and since we feed > *everything* through index.php - that's the place to look at. I am not > sure which version you run, so you may have to "translate" line 173 to > your's. > > Hope that helps! > Till > Hi Till Thanks so much for your reply .. however could I ask for some further help please. Would I change this line (173 on index.php) else { $OUTPUT->show_message($IMAP->error_code == -1 ? 'imaperror' : 'loginfailed', 'warning'); rcmail_kill_session(); } To else { $OUTPUT->show_message($IMAP->error_code == -1 ? 'imaperror' : 'loginfailed', 'warning'); http://www.myloginpage.com rcmail_kill_session(); } I'm not too sure on PHP .. any help would be appreciated! Thanks Dan _______________________________________________ List info: http://lists.roundcube.net/users/

2 2

Re: [RCU] Problem with resolution
by Felipe Neuwald 21 Feb '08

21 Feb '08

_______________________________________________ List info: http://lists.roundcube.net/users/

2 1

Re: [RCU] Global Address Book in RoundCube?
by john 21 Feb '08

21 Feb '08

On Wed, 20 Feb 2008 21:40:51 +0000, "Seb Payne" <seb(a)blackandmaple.com> wrote: Anyway, we really need a global address book and is there such a feature in RoundCube and is it LDAP compatible? I've seen various references to a patch on the forums and mailing list but have had no luck in finding anything. from config/main.db.inc: // in order to enable public ldap search, create a config array // like the Verisign example below. if you would like to test, // simply uncomment the Verisign example. /** * example config for Verisign directory * * $rcmail_config['ldap_public']['Verisign'] = array( * 'name' => 'Verisign.com', * 'hosts' => array('directory.verisign.com'), * 'port' => 389, * 'base_dn' => '', * 'bind_dn' => '', * 'bind_pass' => '', * 'search_fields' => array('mail', 'cn'), // fields to search in * 'name_field' => 'cn', // this field represents the contact's name * 'email_field' => 'mail', // this field represents the contact's e-mail * 'scope' => 'sub', // search mode: sub|base|list * 'filter' => '', // will be &'d with search field ex: (status=act) * 'fuzzy_search' => true); // server allows wildcard search */ _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Global Address Book in RoundCube?
by Seb Payne 21 Feb '08

21 Feb '08

I'm the webmaster of Purple Radio, the student radio station at the University of Durham in the United Kingdom. We are currently using Bongo (www.bongo-project.org) as our backend but for the moment, are using RoundCube as our web front end until they finish the work on the web end or if we move elsewhere. Anyway, we really need a global address book and is there such a feature in RoundCube and is it LDAP compatible? I've seen various references to a patch on the forums and mailing list but have had no luck in finding anything. Thanks! Seb -- Sebastian Payne Undergraduate Computer Science, University of Durham Webmaster, Purple Radio - www.purpleradio.co.uk Head of Van Mildert JCR Computer Committee seb(a)sebpayne.com - sebastian.payne(a)durham.ac.uk www.sebpayne.com - www.dur.ac.uk/sebastian.payne/ _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Wordwrap
by Michael Blinn 20 Feb '08

20 Feb '08

Is there a method for specifying a wordwrap for outgoing Roundcube emails? When I read emails composed in Roundcube in my Thunderbird client, they are displayed as one very long line. In the message source, it looks like the HTML Content-Type attachment lines are encapsulated in <pre> tags (perhaps from line ~80 in editor.js ?) I'm using r803 from http://nightly.roundcube.net/trunk/ Thank you, Michael Blinn -- CONFIDENTIALITY NOTICE: This message, and any attachments that may accompany it, contain information that is intended for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential, or otherwise exempt from disclosure under applicable law. If the recipient of this message is not the intended recipient, any disclosure, copying, or other use of this communication or any of the information, which it contains is unauthorized and prohibited. If you have received this message in error, please notify the original sender by return mail and delete this message, along with any attachments, from your computer. Thank you. _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Problem with resolution
by Felipe Neuwald 20 Feb '08

20 Feb '08

Hi Folks, Some users having problem using roundcube with 800x600 screen resolution. Here, one example when reply some email: http://www.neuwald.biz/files/roundcube800x600reply.jpg . Any idea of how to solve this? Thanks, Felipe Neuwald. _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Display Name on user identity initialization
by Patrick Zaloum 16 Feb '08

16 Feb '08

Hello! I love so many things about roundcube, if the developpers read this: great job, such a beautiful piece of software! thanks a lot! I had a question regarding the default display name at the time of a user's first identity initialization. It would seem that it simply takes the prefix of the email address as the display name. I run my web server where roundcube resides in the same place as my imap server so the users logging into roundcube do authenticate on the machine itself. How difficult would it be to pull the user's real name from /etc/passwd and use that as the display name that gets inserted when a user logs in for the first time? Thanks for any ideas! Pat _______________________________________________ List info: http://lists.roundcube.net/users/

2 2

Re: [RCU] Features? #2
by Alex Walker 11 Feb '08

11 Feb '08

On Mon, 11 Feb 2008 18:59:27 +0800, zamri <myzamri(a)gmail.com> wrote: >> Yeah, this is an issue. I guess you could write a fairly simple web >> interface to create/read/edit a procmail script using simple recipes. >> Putting this into RC seems a little in the wrong place to me, but I can >> understand the need. But again, I'd probably try and opt for a > filtering >> system that would work no matter what client you used. I wonder if > other >> webmail packages offer this - I've only used squirrelmail and RC, so I >> don't have wide experience really. > > It can be made to work if u install sieve daemon and RC have the plugin > (frontend) to configure it. > I don't know whether RC has this. Plugin concept will be good for RC. I have no experience of using sieve, but it sounds like a good idea to me! Alex _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Features? #2
by jody 11 Feb '08

11 Feb '08

Hi again More questions/suggestions: 6. Moveto When a mail is opened a listbox "move to..." appears above the text enabling you to move the mail to a folder. This listbox is absent in the overview. But sometimes i want to move a message to a folder before reading it. Is this possible in RC? (some hidden setting?) 7. Filters Is there a possibility in RC to define Filters which move messages with a certain header, say, to a particular folder? Thank you Jody _______________________________________________ List info: http://lists.roundcube.net/users/

4 4

Default Login Page
by daniel＠nullroutes.com 07 Feb '08

07 Feb '08

Hello - Was hoping for a little help please. I have a homepage and a form which allows a user to enter a username/password. I am trying to make this username and password send direct to my roundcube install. This part works fine. However when the wrong user/pass are entered roundcube gives the usual error 'login failed' but returns the user to the roundcube index.php - I would prefer it to return to user to my login form. I don't suppose anyone could help me locate the required section of code so I can edit. Kind Regards, Daniel _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

Re: [RCU] Features? #2
by Alex Walker 07 Feb '08

07 Feb '08

On Thu, 7 Feb 2008 08:53:16 +0100, jody <jody(a)ifi.uzh.ch> wrote: >> Yeah, this is an issue. I guess you could write a fairly simple web >> interface to create/read/edit a procmail script using simple recipes. >> Putting this into RC seems a little in the wrong place to me, but I can >> understand the need. But again, I'd probably try and opt for a > filtering >> system that would work no matter what client you used. I wonder if > other >> webmail packages offer this - I've only used squirrelmail and RC, so I >> don't have wide experience really. > > In such a case RC would simply offer a tool for editing - > wouldn't the .procmail be valid if you would use another mail client? This is true, but typically RC will be able to read/write from a user's mail directory and not from their home directly. Procmail reads it configuration typically from a user's home directory (~/.procmailrc) which RC wouldn't be able to write to, not at the moment anyway. Allowing RC to write to a user's home directory opens up some other potential security issues I'd imagine. Perhaps there could be an option that you can enable for procmail integration where you have to set each user's .procmailrc to be writable by RC or something. Interesting idea... I'm no expert in PHP, so I don't really know where to start... perhaps make it a feature suggestion on trac? Alex _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

Memory limit reached when sending attachments
by Julien Wadin 06 Feb '08

06 Feb '08

Hi guys, We have a problem, when we try to send an attachment wich is a little bit to heavy. Roundcube tries to allocate a lot of memory, and the process crashes beceause memory limit is reached I've tried to arise memory limit up to 65M, but I think that it should normaly be not more than 16M (php standard is 8). I've got the following lines in error log PHP Fatal error: Allowed memory size of 16777216 bytes exhausted (tried to allocate 10598455 bytes) in program/lib/imap.inc on line 1910 [03-Feb-2008 16:22:22] PHP Fatal error: Allowed memory size of 41943040 bytes exhausted (tried to allocate 10599123 bytes) in program/lib/Mail/mimePart.php on line 226 [03-Feb-2008 17:31:39] PHP Fatal error: Allowed memory size of 68157440 bytes exhausted (tried to allocate 21474171 bytes) in program/lib/Net/SMTP.php on line 745 Do you have a fix for that very annoying bug ? We use RC2 Thank you. -- Wadin Julien Tel : +32 (0) 475 632 168 ou +33 (0) 9 79 99 21 56 Web : http://blog.julienwadin.be/ _______________________________________________ List info: http://lists.roundcube.net/users/

5 10

Having some minor troubles with Roundcube install
by Matt Rossiter 05 Feb '08

05 Feb '08

I believe I have the most recent version of Roundcube installed via svn on Apache/2.2.8. Roundcube is Revision 971. I'm using Server version: 5.1.22-rc FreeBSD port: mysql-server-5.1.22 It actually works at the moment, but there's a couple things I can't figure out. 1) If I edit db.inc.php and set $rcmail_config['db_backend'] = 'mdb2'; - I will get a "FAILED TO CONNECT TO DATABASE" message. I do have MDB2 installed. If I change mdb2 to db it will work. 2) Whether I have the above line set to db or mdb2 I always get the same message with check.php.... Check supplied DB settings DB settings: NOT OK Why would my DB setting be "NOT OK"? (even when using 'db') and why can't I use mdb2? Thanks! Matt _______________________________________________ List info: http://lists.roundcube.net/users/

2 4

Features?
by jody 05 Feb '08

05 Feb '08

Hi I'm new to roundcube (our sysadmin just installed it a few days ago) and i have a few questions (or suggestions? or bug reports?) 1. I tried to send a mail with a subject line but no body. RC didn't send the message but neither did it give a warning. I think it should be possible to send mail without body; or, if there is a reason why this should be impossible, an adequate message should be displayed. (I think this is connected with an issue raised in August 2007: http://lists.roundcube.net/mail-archive/dev/2007-08/0000017.html "Javascript Error when send message without body" The JS Error still occurs!) 2. "Show all" Sometimes it is advantageous to see all messages in a folder at once (e.g. to perfome mass deletions: select all and the klick on the delete icon; or to quickly scan all messages in a folder) Is there a way to this in RC? In Squirrelmail you can toggle between "show all" and "paginate" 3. "Compact" and "Empty" When i open RC, the "Empty" link is not enabled for any folder, not even the Trash folder. Is there some setting which can control this? Or does it have to do with the permissions of folder .Trash on the server? 4. Collapsible folders I have grouped my folders in a hierarchy, i.e. some folders containing other folders. Sometimes it would be cool to be able to collapse a "superfolder" when you're currently not interested in it, and open it again when you need it. Is this possible in RC? I tried klicking on a "superfolder" but that didn't work. 5. Delete icon I think the icon currently used for deletion is a bit misleading because this symbol (circle with a diagonal bar across it) usually denotes something forbidden. I think a simple (red) cross would be clearer. Thank you in advance for any hints to my questions... Jody _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

HTML link not working
by dosan76 05 Feb '08

05 Feb '08

When I get html email from multiply.com, I can see the contents and images but all the html links within roundcube webmail is not clickable. They are just underscored. Is this a bug? Thanks. _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

preview pane
by zux 31 Jan '08

31 Jan '08

Hi I've read somwhere about a feature preview pane. but couldn't get it to work. is it included or do I need tu add some kind of patch or something? _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Re: [RCU] Mass Deletions
by bb 30 Jan '08

30 Jan '08

Charlie Hazlett wrote: > I do not empty my spam folder daily and in no time at all it can contain > over 1000 messages......give it a week and there might be over 10,000. > > I have been online with the same email addresses for a dozen years and > the spam tends to build up. > > > > On 1/24/2008, "bb" <bb(a)0brg.net> wrote: > >> chasd wrote: >>> Playing with RoundCube a bit more, as a work around you could delete >>> the entire mailbox from the "Folders" area of "Personal Settings" and >>> then create a new folder of the same name. >> Or just click the "Select: All" link and then delete 40 messages (or w/e >> your messages/page limit is) at a time. Sure, it's not perfect, but it >> works alright if your mailbox isn't tooooo huge (I am assuming you don't >> want to empty a 10K+ box every day that is not called "Junk" or "Trash" :P). Hmm, this got me interested; how does roundcube handle huge mailboxes anyway? So I tried; $ for ((i=0;i<100000;i++)); do for> echo "spam $i" | mail -s "spam $i" $USER for> done Even though this stopped after the ulimit -u was reached (it sent ~2k messages in total) it gives a pretty good impression of how roundcube handles it... not very well. At first, I set my user preferences to allow message windows with 100K messages but because of the hard 200 limit in the config, I only saw 200 messages. At least I saw them.. once I also modified that value I saw nothing anymore. The roundcube error logs gave: [25-Jan-2008 00:21:34] PHP Fatal error: Allowed memory size of 8388608 bytes exhausted (tried to allocate 2049 bytes) in /a/boao/www/webmail/roundcubemail-0.1-rc2/program/lib/imap.inc on line 133 The HTTP response body was empty, status 200. Changing back all the values, deleting all messages with thunderbird (which worked very smoothly, btw), restarting the webserver; nothing mattered. It kept saying that in the logs. To eventually get it to work again I had to empty the trash with thunderbird and "compact" all the folders. Anyway, not that this is a very likely situation.. It's still quite interesting to see that once it's too full, it's too full and you're doomed if you don't have other means to access your INBOX :) Greetings, b^4 _______________________________________________ List info: http://lists.roundcube.net/users/

3 4

WYSIWYG - editing
by Christian Kütbach 25 Jan '08

25 Jan '08

Hello all, how do I enable the HTML-Composing in the rc2 ? As far as I understood it the HTML-Composing is included but not activated by default. Christian Kütbach -- UNEM-Produktion Dipl.-Inf. Christian Kütbach Tel.:02507-982722 c.kuetbach(a)unem.de www.unem.de _______________________________________________ List info: http://lists.roundcube.net/users/

3 5

RoundCube in PHPArch.com Magazine
by neugi 25 Jan '08

25 Jan '08

Hi, there is a article about roundcube in the new phparch.com magazine ;) best _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Mass Deletions
by Charlie Hazlett 25 Jan '08

25 Jan '08

I am still seeking a way to do mass deletions of emails. I know one may empty the trash folder but there should be an easier and quicker way to empty other folders as well.......my spam folder, for instance. This is the ONE thing that keeps me from using RC....until that feature is included I will stick with Iloha......it does everything I want.....just not as "pretty". ######## NOTICE: Due to Presidential Executive Orders, the National Security Agency may have read this email without warning, warrant, or notice. They may do this without any judicial or legislative oversight. You have no recourse nor protection save calling for the impeachment of the current President. ######## Charlie Hazlett charlie(a)hazlett.net Columbus, Ohio _______________________________________________ List info: http://lists.roundcube.net/users/

4 5

Folder limit
by Paul Tansom 24 Jan '08

24 Jan '08

Is there a limit on the number of folders Roundcube can work with? When I go to the folders list in my primary mail account it sits loading for a while and then ends up with a blank page. I am assuming I have too many folders for Roundcube to work with. Either that or the fact that I have folders within folders is causing problems. I have 1311 folders at present with the archives that all sit below an archive folder. All works fine with Thunderbird accessing the folders via IMAP and Mutt directly on the server. I am using Dovecot for IMAP access. -- Paul Tansom | Aptanet Ltd. | http://www.aptanet.com/ | 023 9238 0001 ====================================================================== Registered in England | Company No: 4905028 | Registered Office: Crawford House, Hambledon Road, Denmead, Waterlooville, Hants, PO7 6NU _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Unable to save email addresses from messages into contact table
by Jason Levine 24 Jan '08

24 Jan '08

Hi Group , Clicking on the "+" sign next to an email address to add them as a contact generates the following error in a red bar at the top of the page : "Could not save the contact address" It does check to see if it is already an address, because when I try to add an address that is already in my address book it says "A Contact with this email address already exists" So I am guessing I might be having a problem writing from this page to the contact tbale...any ideas ? Thanks, Jason _______________________________________________ List info: http://lists.roundcube.net/users/

7 13

Invalid Post
by Patrick Cross 09 Jan '08

09 Jan '08

I just installed roundcube and I am getting the following error after I try to login. I don't see any errors in the log file. Any suggestions as to what could be wrong? This is on a windows server. The page you are looking for cannot be displayed because an invalid method (HTTP verb) was used to attempt access. _____ Please try the following: * Contact the Web site administrator if you believe that this request should be allowed. * Make sure that the Web site address displayed in the address bar of your browser is spelled and formatted correctly. HTTP Error 405 - The HTTP verb used to access this page is not allowed. Internet Information Services (IIS) _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

problem after upgrade to 0.1-rc2
by john 27 Dec '07

27 Dec '07

environment: OpenBSD 4.0/i386, chrooted apache, roundcube 0.1-rc1, dovecot 1.0.2 (yes, i should probably get this upgraded) i am providing services to a few dozen users via an https url. after applying the update to -rc2, i was unable to login via the web interface. /logs/errors shows: [26-Dec-2007 14:58:56 +0000] IMAP Error: Invalid password after looking around at the dovecot logs, and finding nothing, i decided to crank up the logging (in dovecot and roundcube). still nothing, and after taking a peek with tcpdump i suspected that the requests weren't even making it to dovecot. running `openssl s_client -connect 127.0.0.1:993' confirmed my suspicions (i think), as it worked just fine: New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 1024 bit [...snip...] --- * OK Dovecot ready. A345 login john XXXXXXXXX A345 OK Logged in. Z345 logout * BYE Logging out Z345 OK Logout completed. read:errno=0 i believe the relevant parts of main.inc.php are: // the mail host chosen to perform the log-in // leave blank to show a textbox at login, give a list of hosts // to display a pulldown menu or set one host as string. // To use SSL connection, enter ssl://hostname:993 $rcmail_config['default_host'] = 'ssl://localhost:993'; // TCP port used for IMAP connections $rcmail_config['default_port'] = 993; i have tried changing `localhost' to the FQDN of my host (plus other relevant config changes), and a few other permutations, none of which shed any light on the scene for me. anything from playful nudges to get me looking in the right direction to hitting me right upside the head with a cluestick will be much appreciated. regards, --john _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Session does NOT timeout, altough I have a timeout
by Farhan Fayyaz 23 Dec '07

23 Dec '07

Hi folks First of all I want to say, RoundCube is a nice thing! But I have one problem: I log into RoundCube with an available account and leave the computer. The next day, I'm still logged in. So if I log in from a public computer and forget to log out, my account is predestinated to get compromised. If I dont clear the browser's cache and history, RoundCube is opened without a login request. => Logs in with the last logged in account. I also run Squirrelmail, and there, even if I just reload the URL, I'm asked for user and pw. I think, this behavior should be also possible for RoundCube. I have to explicitly log out with the logout button to get logged out effectively. Altough it is the task of the user to log out, an automatic log out functionality wouldn't be bad. What am I doing wrong? Or don't I have understood everything? Thanks for help _______________________________________________ List info: http://lists.roundcube.net/users/

4 5

Login hangs only for a few users
by dale gallagher 23 Dec '07

23 Dec '07

Hi there I can't find a reference to this issue in the mailing list archives. Does anyone know why for some users the login hangs indefinitely and the php process starts munching CPU and memory (leak?). Very strange. My 'username' fields are in this format: login%domain.com I seriously doubt that could have anything to do with it, given that all users' logins are in that format. Any ideas? Running v0.1-rc2 under lighttpd 1.4.15 with php 4.4.4 and Dovecot 1.0.7 Thanks Dale _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

Why does RC2 use user@localhost for authenticating against IMAP?
by Tommy 23 Dec '07

23 Dec '07

Entry page logins use the format: user/pasword when authenticating against IMAP. This portion works for my server. However, for some reason when viewing the folders section under personal settings, RC2 tries to switch to user@host/password which does NOT work on my server. Where can I fix this? Also, RC2 does not display the buttons/search bar properly when using Firefox version 2.0.0.11. Anyone else have this problem? Thanks, Tommy (BTW, upgrading from beta-1 to rc2 is a complete waste of time. You might as well just reinstall RC and upgrade only the database part.) -- Only God knows everything...... and he works for Mossad. _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Authentification with Kerberos
by Jean 18 Dec '07

18 Dec '07

Hello I would like to know if anybody has already configured his RoundCube webmail with a kerberos authentification. I'm using a Postfix and Cyrus-imap mail server. The authentification is done using saslauthd with gssapi mechanism. My web server is Apache 2 Thanks _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Re: [RCU] Login hangs only for a few users
by dale gallagher 17 Dec '07

17 Dec '07

On 17/12/2007, Eric <cephelo(a)gmail.com> wrote: > I had a similar issue. It turned out to be a permission issue Eric, I was just about to post my solution! Yes, you're right. There were a few messages which I'd moved into various directories which were not rw by the IMAP user! Solved! Thanks for responding. _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Setting for 60s refresh?
by Eric 14 Dec '07

14 Dec '07

Where is the setting to control the 60s refresh? We're using Roundcube over a high grade SSL connection and 60 seconds is much too frequent, but I don't see a relevant setting anywhere. I couldn't even locate the timeout call in the JavaScript, assuming there is one somewhere. Thanks. _______________________________________________ List info: http://lists.roundcube.net/users/

3 2

Read receipt not working?
by kmnair 13 Dec '07

13 Dec '07

Hello, The read receipt function in RC does not seem to work. I had put in a query for confirmation in the forum, but nobody could confirm. Could anybody confirm whether the read receipt is working. If so, RC1 or RC2. Thanks and regards kmn _______________________________________________ List info: http://lists.roundcube.net/users/

3 15

Re: [RCU] Question from message sending page
by Dj02 13 Dec '07

13 Dec '07

Hi, It shows a list of identitys when you configure them but when you are new user/login first time etc and you haven't configured indentity settings it shows "from" (sender box) as text box. I would wan't that in this sitsuation when you are new user/login first time etc and you haven't configured indentity settings yet it could automaticully fill your login name (if it's a full e-mail address as sender on "from" (sender box) and it could be printed as text (no text box available) Or second way could be that when you login first time you would need to specify indentity settings (without this you can't login or something like that). This option could be editable in roundcude config that administrator can choosee does new user need to spesify it's identity. OS: Windows Vista Ultimate x64 Apache 2.2, PHP 5.2 as module and hMailServer 4.2 By, Mika _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

problems with atachements
by gabriel.petrica＠rootsystems.ro 13 Dec '07

13 Dec '07

Hello I just installed roundcube mail client on a server. I can receive / send mails. The only problem is that I can't send attachments. I can upload them but when I send the email, the attachments are not sent, and also the email saved in "Sent" folder does not contains the attached file. Does anyone have any idea ? In main.inc.php I have $rcmail_config['temp_dir'] = 'tmp/'; The tmp folder is writable for apache (777), so ... When I receive an email with a file attached, I can see the file in the email but I don't see the file in the tmp folder. I am not sure which is the problem! Thank you in advance for any answer! Gabi _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Question from message sending page
by Dj02 13 Dec '07

13 Dec '07

Hi, I spend many hours for trying to make workaround to message writing page (?_task=mail&_action=compose). I would want From-line line to bee read-only (no textbox), only the address that you used to login would be shown. So the only way to customize this line would be identident settings. Why i want this to work this way? Because it's easier to user that he doesn't need to frite he's own e-mail address necesserully again. By, Mika _______________________________________________ List info: http://lists.roundcube.net/users/

2 1

Question from message sending page
by Dj02 13 Dec '07

13 Dec '07

Hi, I spend many hours for trying to make workaround to message writing page (?_task=mail&_action=compose). I would want From-line line to bee read-only (no textbox), only the address that you used to login would be shown. So the only way to customize this line would be identident settings. Why i want this to work this way? Because it's easier to user that he doesn't need to frite he's own e-mail address necesserully again. By, Mika _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Vulnerability in Roundcube
by Vincent Bernat 13 Dec '07

13 Dec '07

Hi ! A vulnerability was discovered in Roundcube: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=455840 It seems that there is no fix yet. Any idea on this topic? Thanks -- IT DOES NOT SUCK TO BE YOU IT DOES NOT SUCK TO BE YOU IT DOES NOT SUCK TO BE YOU -+- Bart Simpson on chalkboard in episode AABF13 _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

charset problem
by Felipe Neuwald 12 Dec '07

12 Dec '07

Hi folks. I'm from Brazil, and here we use characters like é í ó ú ç ã õ, etc. I'm sending emails ok, and the receiver are receiving the emails ok too. The messages stored on sent mail folder, aren't ok. Here is one example: teste né meu brother é isso aí né meu ç é cedilha mesmo não é ? é. The original message (sent via roundcube and received ok), is here: teste né meu brother é isso aí né meu ç é cedilha mesmo não é ? é. Does somebody knows how to solve this? Thanks, Felipe Neuwald. _______________________________________________ List info: http://lists.roundcube.net/users/

1 0

Feedback and feature requests
by dale gallagher 10 Dec '07

10 Dec '07

Hi there Wow, this is a lovely webmail app, thank you! Finally an open source webmail project which looks great and works well. It was an absolute breeze to setup :-) I'm eagerly testing it as a possible replacement for my current webmail system. I'm serving it via lighttpd (running under FastCGI) and Dovecot IMAP. I've included some preliminary feedback and suggestions below. Thanks Dale ----- These are features which I feel are missing, even for a basic webmail client: 1. Mark messages as read/unread/urgent 2. Proper redirect support - ie send mail in original form to another. The following are features I'd like to see added: 1. Login-to-email mapping of user<delimiter>domain.name All my users login with user%domain.name and many other ISPs do the same, or use a variation thereof user(a)domain.name, or user:domain.name. Perhaps a config option could be added to generate default identities by splitting the login at a pre-defined delimeter and concatentating with '@' to create the email address, and leaving the name part to the user to fill in. 2. 'Junk' and 'Not Junk' actions. Most sysadmins also employ some form of spam filtering. I use DSPAM which allows users to train their own filters. The setup I employ involves minimal admin from my perspective, namely that users mail spam to spam@myisp,name and false positives to notspam(a)myisp.name. So, for all folders other than the Junk folder, the action (button) called 'Junk' would redirect the message to a global spam(a)myisp.net address and then move it to the Junk folder. Likewise, when viewing the Junk folder, the action (button) called 'Not Junk' would redirect the message to a global notspam(a)myisp.net address and then move it to the Inbox folder. For flexibility in terms of other spam filtering setups, perhaps the spam and notspam actions could be customised to one of "forward to an address", or "pipe to another process" which should return something like a 0 for success, or 1 for failure... _______________________________________________ List info: http://lists.roundcube.net/users/

9 13

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users