Users

users@lists.roundcube.net

2 participants
2900 discussions

Re: [RCU] Recommendation Hardware for RoundCube
by Steve Perkins 01 Oct '10

01 Oct '10

PLAIN is the default. It is ALWAYS available, even if you have other methods in place. Therefore, your system now just drops down to PLAIN before trying anything else ! Therefore, you will see a speed increase as the system just logs in , rather than trying anything else first. Of course, if the other AUTH methods you advertise work, then they should be similar in speed. What generally happens is that the server will advertise an AUTH method that it doesn't support. Then you see speed loss due to try and catch handshaking while the client drops down each time to a lower level of authentication. This can kill sessions. So its try, stop and wait, try something else, stop and wait, try stop and wait, oh that one works !! On Thu, 30 Sep 2010 21:43:52 +0700, <hoannt(a)mail.ciid.cz.cc> wrote: > Hi Stan, > > Last time, I let those configuration as default: > > $rcmail_config['imap_auth_type'] = null; > $rcmail_config['imap_root'] = null; > $rcmail_config['imap_delimiter'] = null; > > Now, my one is: > > $rcmail_config['imap_auth_type'] = "plain"; > $rcmail_config['imap_root'] = null; > $rcmail_config['imap_delimiter'] = "."; //a dot for delimiter > > 1. $rcmail_config['imap_auth_type'] = "plain"; > Actually, in MYSQL database, the Password is MD5-CRYPT. I just checked > it again, the password was store like > "$1$51dd62a1$RxZRpwoZ/q5EuEH/3epFp". But I don't know why I setup the > PLAIN and it's still working. This is my experience when I configure > for > ManageSieve Plugin (of RoundCube). I also set Plain for ManageSieve and > it works. > > 2. $rcmail_config['imap_root'] = ""; //blank > I store all mails in the directory of each user, so this parameter is > blank. > > 3. $rcmail_config['imap_delimiter'] = "."; > I'm using Dovecot and the Default folder Delimiter is a dot "." > > In my opinion, the first one, "imap_auth_type", is the most important > parameter to speed up when you are login, and when you're click on other > folders in the interface. I changed it once and the effect was very > good. It was true in my case. > For the second and the third, I see no effect but I still want to > change it. > > BRs/ Hoan. > > > > > _______________________________________________ > List info: http://lists.roundcube.net/users/ > BT/0fe063a5 _______________________________________________ List info: http://lists.roundcube.net/users/ BT/9b404e9e

1 0

Recommendation Hardware for RoundCube
by hoannt＠mail.ciid.cz.cc 30 Sep '10

30 Sep '10

Dear Supporter, I migrated my Email server from SquirrelMail to RoundCube. From the last (with SquirrelMail) the Email Server worked fine. Now, my RoundCube interface works fine also, except, the loading speed of Web page quite slow. It slows down speed of all components like Login Page, Mailing Page, Compose Page, Settings Page... Could you please let me know what is the Recommendation Hardware to using Round Cube (Chip, RAM, Bus speed, HardDisk...). This might be my old Server with weak processing capability, and I plan to upgrade it. May thanks in advance for you support. BRs/ HoanNT. _______________________________________________ List info: http://lists.roundcube.net/users/ BT/9b404e9e

6 19

Password plug-in stops saving pwd when upgrading mysql from 5.0 to 5.1
by Roberto 27 Sep '10

27 Sep '10

Hi, I upgraded mysql from 5.0 to 5.1 and now the "password" plug-in refuses to save. The log follows. RC version is 0.4, and mysql was updated successfully when I switched from 0.4-beta. I don't undestand why the error messages suggests me to run "mysql_upgrade" when this is a script to migrate from one version of RC to another. DB Error: MDB2 Error: unknown error Query: _doQuery: [Error message: Could not execute statement] [Last executed query: SELECT update_passwd('*****', 'xxx(a)xxx.xx')] [Native code: 1558] [Native message: Column count of mysql.proc is wrong. Expected 20, found 16. Created with MySQL 50067, now running 50151. Please use mysql_upgrade to fix this error.] in /path/to/roundcubemail-0.4/program/include/rcube_mdb2.php on line 644 (POST /?_task=settings&_action=plugin.password-save?_task=&_action=) Thanks for any help Roberto _______________________________________________ List info: http://lists.roundcube.net/users/ BT/9b404e9e

1 0

could not move the message
by Steve Lindemann 24 Sep '10

24 Sep '10

I've installed roundcubemail (v0.4) for the first time and after resolving a few initial issues I was able to log in and view my email (using myself as a test). The problem comes when I try to move a message to the trash, I get an error stating "could not move the message". When I sent a test message to myself, it delivered ok, but I also got an quick error and nothing shows up in the sent folder. I've dug around in the wiki and searched the email list archives and haven't be able to find this topic covered. So, other than my inbox (in /var/spool/mail), where are the "folders" that roundcubemail uses in the filesystem and what ownership and permissions should they have? background: centos 5.5 postfix for smtp dovecot for imap/pop Today is the first time I've configured the imap server, but dovecot is pretty easy to work with... and I've had the pop server working for over 6 years now. -- Steve Lindemann, MSIS __ Network Administrator //\\ ASCII Ribbon Campaign Marmot Library Network \\// against HTML/RTF email, +1.970.242.3331 x116 //\\ vCards & M$ attachments http://www.marmot.org _______________________________________________ List info: http://lists.roundcube.net/users/ BT/9b404e9e

1 0

RoundCube with remote IMAP slow
by Nico Schlömer 15 Sep '10

15 Sep '10

Dear all, I'm running a RoundCube installation on a FreeBSD server here, and it's fed by a *remote IMAP server. As recommended in the settings, I set $rcmail_config['enable_caching'] = true; but despite this, accessing the mails is *dead slow. It takes at least 5 seconds to access any given folder, and this doesn't seem to change after the folder has been accessed once (and hence cached?). This makes using RoundCube quite inconvenient. I'm quite oblivious as to what could cause such a slow performance, but I'm willing to test and try. Hints, anyone? Cheers, Nico _______________________________________________ List info: http://lists.roundcube.net/users/ BT/9b404e9e

5 25

Display GECOS names in From filed
by Frank Bonnet 14 Sep '10

14 Sep '10

Hello How configure roundcube to display names from GECOS field into the From: field ? Actually we use LDAP backend and the name displayed is the *login* ( uid ) of the sender , I would like to display real names extract from the GECOS field ( givenName LDAP attr ) thanks a lot _______________________________________________ List info: http://lists.roundcube.net/users/ BT/9b404e9e

2 1

Problem with attachments in Internet Explorer
by Filipe Carvalho 10 Sep '10

10 Sep '10

Hello, We've recently migrated our webmail service to RoundCube, but we've been having some problems with Internet Explorer. Internet Explorer tries to download the attachment but we get the error showed in this picture: http://feupload.fe.up.pt/get/cIICVrzuu0VmuKI In all the other browsers we have no problem. Has anyone encountered this problem? Regards, Filipe -- Filipe André Romualdo de Carvalho Unidade de Administração de Sistemas (UAS) Centro de Informática Prof. Correia de Araújo (CICA) Faculdade de Engenharia da Universidade do Porto (FEUP) Tlf: (+351) 22 508 15 06 - SIP/VoIP: filipec(a)fe.up.pt / Ext: 3092 _______________________________________________ List info: http://lists.roundcube.net/users/ BT/9b404e9e

1 0

signature doesn't work
by Bernics Gábor 08 Sep '10

08 Sep '10

Hello, Everybody! I updated my Roundcube to the latest stable version, than I tried change my signature. I see this message: "SERVICE CURRENTLY NOT AVAILABLE! Error No. [500]" error log: [08-szept-2010 13:59:46] MDB2 Error: no such field (-19): _doQuery: [Error message: Could not execute statement][Last executed query: PREPARE mdb2_statement_mysql_3618113ed6cf01626cf4293df93d144dca8686918 FROM 'UPDATE identitiesn SET changed=now(), `name`=?,`email`=?, `organization`=?, `reply-to`=?, `bcc`=?, `standard`=?, `signature`=?, `html_signature`=?n WHERE identity_id=?n AND user_id=?n AND del1'][Native code: 1054][Native message: Unknown column 'changed' in 'field list'] [2010-Sep-08 13:59:46 +0200]: DB Error: _doQuery: [Error message: Could not execute statement][Last executed query: PREPARE mdb2_statement_mysql_3618113ed6cf01626cf4293df93d144dca8686918 FROM 'UPDATE identitiesn SET changed=now(), `name`=?,`email`=?, `organization`=?, `reply-to`=?, `bcc`=?, `standard`=?, `signature`=?, `html_signature`=?n WHERE identity_id=?n AND user_id=?n AND del1'][Native code: 1054][Native message: Unknown column 'changed' in 'field list'] in /var/www/roundcube/program/include/rcube_mdb2.php on line 272 (POST /roundcube/?_task=settings&_action=save-identity) I think it's a database problem. Can I make the new columns of RC database automatically (by an update script)? Best Regards, Gabor Bernics _______________________________________________ List info: http://lists.roundcube.net/users/ BT/9b404e9e

1 0

German Language File
by Ulli Heist 06 Sep '10

06 Sep '10

Hello, If you like a german language file for the help-plugin: http://heist.hobby-site.org/fileupload/filemanager.php?download=help_plugin… If you like a german language file for the markasjunk-plugin: http://heist.hobby-site.org/fileupload/filemanager.php?download=markasjunk_… Is there a list of public Roundcube-Installations available? Is it possible to set the Username and Server by GET-Parameters like http://heist.hobby-site.org/RoundCube?user=test&server=imap.web.de Best Regards from Germany Ulli Heist _______________________________________________ List info: http://lists.roundcube.net/users/ BT/9b404e9e

1 0

German - Reply - Tag
by Ulli Heist 03 Sep '10

03 Sep '10

Hello, I try to write in English. Since a few days I'm using CubeMail. In Germany many Users uses an AW: instead of Re: in the subject of an Reply-Mail. Answering an Reply-Mail (starting with AW:) results in Re: AW: .. That doesn't look good. For this case I've added an line in the program/steps/mail/compose.inc starting at line 893: // create a reply-subject else if ($compose_mode == RCUBE_COMPOSE_REPLY) { // NEW begin if (preg_match('/^aw:/i', $MESSAGE->subject)) {$MESSAGE->subject[0] = 'R'; $MESSAGE->subject[1] = 'e';} // AW: = Re: // NEW end if (preg_match('/^re:/i', $MESSAGE->subject)) $subject = $MESSAGE->subject; else $subject = 'Re: '.$MESSAGE->subject; } ---cut--- Please add this function to future versions. Best regards from Germany Ulli (Heist) -- http://heist.hobby-site.org/ _______________________________________________ List info: http://lists.roundcube.net/users/ BT/9b404e9e

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users