Well. the script was written before private abooks was added... ACL is not checked for that yet But have you created the user? Can you show the output of ldapsearch? I have not yet scanned yor slapd log... will do that at home
Andreas
"kaifamm@libero.it" kaifamm@libero.it schrieb:
Hi All,
thanks for the answers !!!
I made other tests :
If I try this : ldapsearch -xLLL -H ldap://localhost:389 -D cn=rcuser, ou=rcabook,dc=localhost -w rcpass -b ou=rcabook,dc=localhost it works fine.
If I try this : ldapsearch -xLLL -H ldap://localhost:389 -D cn=mark, ou=private,ou=rcabook,dc=localhost -w xxxx It answer : ldap_bind: Invalid credentials (49), so I think that there is an ACL problem.
I think that there is an error in the script rcabook-setup.sh.
I did run and run again the script rcabook-setup.sh, it doesn't return errors and it said : The LDAP addressbook is ready now for using: base_dn: ou=rcabook,dc=localhost bind_dn: cn=rcuser,ou=rcabook,dc=localhost
Use the following command for reading and checking your setup: ldapsearch -xLLL -H ldap://localhost:389 -D cn=rcuser,ou=rcabook, dc=localhost -w rcpass -b ou=rcabook,dc=localhost
I report my ldap.log with the debug of ldap server :
daemon: activity on: slap_listener_activate(7): daemon: epoll: listen=7 busy daemon: epoll: listen=8 active_threads=0 tvp=zero
slap_listener(ldap:///)
daemon: listen=7, new connection on 13 daemon: activity on 1 descriptor daemon: activity on: daemon: epoll: listen=7 active_threads=0 tvp=zero daemon: epoll: listen=8 active_threads=0 tvp=zero daemon: added 13r (active) listener=(nil) daemon: activity on 1 descriptor conn=21 fd=13 ACCEPT from IP=127.0.0.1:45320 (IP=0.0.0.0:389) daemon: activity on: 13r daemon: read active on 13 daemon: epoll: listen=7 active_threads=0 tvp=zero connection_get(13) daemon: epoll: listen=8 active_threads=0 tvp=zero connection_get(13): got connid=21 connection_read(13): checking for input on id=21 ber_get_next ldap_read: want=8, got=8 0000: 30 84 00 00 00 3e 02 01 0....>..
ldap_read: want=60, got=60 0000: 01 60 84 00 00 00 35 02 01 03 04 2a 63 6e 3d 6d
.`....5....*cn=m 0010: 61 72 6b 2c 6f 75 3d 70 72 69 76 61 74 65 2c 6f
ark,ou=private,o 0020: 75 3d 72 63 61 62 6f 6f 6b 2c 64 63 3d 6c 6f 63
u=rcabook,dc=loc 0030: 61 6c 68 6f 73 74 80 04 78 78 78 78 alhost..xxxxber_get_next: tag 0x30 len 62 contents: ber_dump: buf=0xa0b040a8 ptr=0xa0b040a8 end=0xa0b040e6 len=62 0000: 02 01 01 60 84 00 00 00 35 02 01 03 04 2a 63 6e
.......5....*cn 0010: 3d 6d 61 72 6b 2c 6f 75 3d 70 72 69 76 61 74 65 =mark,ou=private 0020: 2c 6f 75 3d 72 63 61 62 6f 6f 6b 2c 64 63 3d 6c ,ou=rcabook,dc=l 0030: 6f 63 61 6c 68 6f 73 74 80 04 78 78 78 78 ocalhost..xxxx op tag 0x60, time 1330963449 ber_get_next ldap_read: want=8 error=Resource temporarily unavailable conn=21 op=0 do_bind ber_scanf fmt ({imt) ber: ber_dump: buf=0xa0b040a8 ptr=0xa0b040ab end=0xa0b040e6 len=59 0000: 60 84 00 00 00 35 02 01 03 04 2a 63 6e 3d 6d 61
....5....*cn=ma 0010: 72 6b 2c 6f 75 3d 70 72 69 76 61 74 65 2c 6f 75
rk,ou=private,ou 0020: 3d 72 63 61 62 6f 6f 6b 2c 64 63 3d 6c 6f 63 61
=rcabook,dc=loca 0030: 6c 68 6f 73 74 80 04 78 78 78 78 lhost..xxxxber_scanf fmt (m}) ber: ber_dump: buf=0xa0b040a8 ptr=0xa0b040e0 end=0xa0b040e6 len=6 0000: 00 04 78 78 78 78 ..xxxx
dnPrettyNormal: <cn=mark,ou=private,ou=rcabook,dc=localhost>
=> ldap_bv2dn(cn=mark,ou=private,ou=rcabook,dc=localhost,0) <= ldap_bv2dn(cn=mark,ou=private,ou=rcabook,dc=localhost)=0 => ldap_dn2bv(272) <= ldap_dn2bv(cn=mark,ou=private,ou=rcabook,dc=localhost)=0 => ldap_dn2bv(272) <= ldap_dn2bv(cn=mark,ou=private,ou=rcabook,dc=localhost)=0 <<< dnPrettyNormal: <cn=mark,ou=private,ou=rcabook,dc=localhost>, <cn=mark, ou=private,ou=rcabook,dc=localhost> conn=21 op=0 BIND dn="cn=mark,ou=private,ou=rcabook,dc=localhost" method=128 do_bind: version=3 dn="cn=mark,ou=private,ou=rcabook,dc=localhost" method=128 ==> bdb_bind: dn: cn=mark,ou=private,ou=rcabook,dc=localhost bdb_dn2entry("cn=mark,ou=private,ou=rcabook,dc=localhost") => bdb_dn2id("cn=mark,ou=private,ou=rcabook,dc=localhost") <= bdb_dn2id: get failed: DB_NOTFOUND: No matching key/data pair found (-30988) send_ldap_result: conn=21 op=0 p=3 send_ldap_result: err=49 matched="" text="" send_ldap_response: msgid=1 tag=97 err=49 ber_flush2: 22 bytes to sd 13 0000: 30 84 00 00 00 10 02 01 01 61 84 00 00 00 07 0a
0........a...... 0010: 01 31 04 00 04 00 .1....ldap_write: want=22, written=22 0000: 30 84 00 00 00 10 02 01 01 61 84 00 00 00 07 0a
0........a...... 0010: 01 31 04 00 04 00 .1....conn=21 op=0 RESULT tag=97 err=49 text= daemon: activity on 1 descriptor daemon: activity on: daemon: epoll: listen=7 active_threads=0 tvp=zero daemon: epoll: listen=8 active_threads=0 tvp=zero daemon: activity on 1 descriptor daemon: activity on: 13r daemon: read active on 13 daemon: epoll: listen=7 active_threads=0 tvp=zero connection_get(13) daemon: epoll: listen=8 active_threads=0 tvp=zero connection_get(13): got connid=21 connection_read(13): checking for input on id=21 ber_get_next ldap_read: want=8, got=0
ber_get_next on fd 13 failed errno=0 (Success) connection_read(13): input error=-2 id=21, closing. connection_closing: readying conn=21 sd=13 for close connection_close: conn=21 sd=13 daemon: activity on 1 descriptor daemon: removing 13 daemon: activity on: conn=21 fd=13 closed (connection lost) daemon: epoll: listen=7 active_threads=0 tvp=zero daemon: epoll: listen=8 active_threads=0 tvp=zero
Thanks a lot Mark
----Messaggio originale---- Da: andudi@gmx.ch Data: 05/03/2012 14.09 A: "kaifamm@libero.it"kaifamm@libero.it, users@lists.roundcube.net Ogg: Re: [RCU] Ldap Addressbook : problem for credentials in private
addressbook
Hei I am i ski hollydays and have not my setup in front.
Your setup seems ok, but can you try to connect with ldapsearch on the
commandline?
Another try could be to switch on logging in slapd.conf Ldap.conf is not used by server but by clients like ldapsearch...
Andreas
"kaifamm@libero.it" kaifamm@libero.it schrieb:
Hi All,
I configured the ldap server and roundcube to manage contacts. I used the howto : http://trac.roundcube.net/wiki/Howto_Ldap. It work quite, I have only
a problem for credentials in private addressbook. The public addressbook works fine, I can search and add contacts.I checked the Mark's password and it is correct. I tried to use
rootpw
but it doesn't works.
My versions are : openldap-servers-2.4.19-6 php-5.3.3-1 roundcube 0.7.1
I report the error in ldap log of rouncube, my slapd.conf and my main.inc.php.
Thanks a lot
Mark
logs/ldap :
[05-Mar-2012 10:09:01 +0100]: C: Connect [localhost:389] [05-Mar-2012 10:09:01 +0100]: S: OK [05-Mar-2012 10:09:01 +0100]: C: Bind [dn: cn=mark,ou=private,ou=rcabook, dc=localhost] [pass: xxxx] [05-Mar-2012 10:09:01 +0100]: S: Invalid credentials [05-Mar-2012 10:09:01 +0100]: C: Close
[05-Mar-2012 10:14:24 +0100]: C: Connect [localhost:389] [05-Mar-2012 10:14:24 +0100]: S: OK [05-Mar-2012 10:14:24 +0100]: C: Bind [dn: cn=mark,ou=private,ou=rcabook, dc=localhost] [pass: xxxx] [05-Mar-2012 10:14:24 +0100]: S: Invalid credentials [05-Mar-2012 10:14:24 +0100]: C: Close [05-Mar-2012 10:27:42 +0100]: C: Connect [localhost:389] [05-Mar-2012 10:27:42 +0100]: S: OK [05-Mar-2012 10:27:42 +0100]: C: Bind [dn: cn=mark,ou=private,ou=rcabook, dc=localhost] [pass: xxxx] [05-Mar-2012 10:27:42 +0100]: S: Invalid credentials [05-Mar-2012 10:27:42 +0100]: C: Close [05-Mar-2012 10:27:52 +0100]: C: Connect [localhost:389] [05-Mar-2012 10:27:52 +0100]: S: OK [05-Mar-2012 10:27:52 +0100]: C: Bind [dn: cn=mark,ou=private,ou=rcabook, dc=localhost] [pass: xxxx] [05-Mar-2012 10:27:52 +0100]: S: Invalid credentials [05-Mar-2012 10:27:52 +0100]: C: Add [dn:
mail=ssssss@iiii.uu,cn=mark,
ou=private,ou=rcabook,dc=localhost]: Array ( [cn] => ssssssss sss [sn] => sss [givenname] => ssssssss [mail] => ssssss@iiii.uu [objectClass] => Array ( [0] => top [1] => inetOrgPerson )
)
[05-Mar-2012 10:27:52 +0100]: S: Strong(er) authentication required [05-Mar-2012 10:27:52 +0100]: C: Close
config/main.inc.php
$rcmail_config['ldap_public']['public'] = array( 'name' => 'Public LDAP Addressbook', 'hosts' => array('localhost'), 'use_tls' =>