Hello,

Thanks, CalDAV is another thing i'd like to do as I'd like to sync calendars well maybe share would be a better word.

How do I get this going?

Thanks. Dave.

On 6/21/19, Egoitz Aurrekoetxea egoitz@sarenet.es wrote:

Hi David,

Is doable. We adapted and old version of calendar/caldav (even with scheduling) plugin from Kolab to work with new versions of Roundcube. I have pending the upload the relevant part of the code to GitHub.

Cheers!

Egoitz Aurrekoetxea Dpto. de sistemas 944 209 470 Parque Tecnológico. Edificio 103 48170 Zamudio (Bizkaia) egoitz@sarenet.es mailto:undefined www.sarenet.es http://www.sarenet.es/ Antes de imprimir este correo electrónico piense si es necesario hacerlo.

...

El 21 jun 2019, a las 19:18, David Mehler dave.mehler@gmail.com escribió:

Hello,

Running a roundcube 1.3 setup, and wanting to get a calendar going. Is this doable?

Thanks. Dave. _______________________________________________ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users

On 2019-06-24 02:25, Egoitz Aurrekoetxea wrote:

Hi David,

Let me provide you a patch and some version locations from where you should start… I’m busy at work now but I’ll try my bests for providing you a version today or tomorrow all these… We planned to upload to GitHub but… I’m overloaded…

Let’s talk today at last time of the afternoon,

Cheers,

EGOITZ AURREKOETXEA Dpto. de sistemas 944 209 470 Parque Tecnológico. Edificio 103 48170 Zamudio (Bizkaia) egoitz@sarenet.es www.sarenet.es [2] Antes de imprimir este correo electrónico piense si es necesario hacerlo.

...

El 21 jun 2019, a las 21:24, David Mehler dave.mehler@gmail.com escribió: Hello,

Thanks, CalDAV is another thing i'd like to do as I'd like to sync calendars well maybe share would be a better word.

How do I get this going?

Thanks. Dave.

On 6/21/19, Egoitz Aurrekoetxea egoitz@sarenet.es wrote: Hi David,

Is doable. We adapted and old version of calendar/caldav (even with scheduling) plugin from Kolab to work with new versions of Roundcube. I have pending the upload the relevant part of the code to GitHub.

Cheers!

Egoitz Aurrekoetxea Dpto. de sistemas 944 209 470 Parque Tecnológico. Edificio 103 48170 Zamudio (Bizkaia) egoitz@sarenet.es mailto:undefined www.sarenet.es [1] http://www.sarenet.es/ Antes de imprimir este correo electrónico piense si es necesario hacerlo.

El 21 jun 2019, a las 19:18, David Mehler dave.mehler@gmail.com escribió:

Hello,

Running a roundcube 1.3 setup, and wanting to get a calendar going. Is this doable?

Thanks. Dave.

Egoitz,

Is this the kolab/calendar and kolab/libcalendaring pair of plugins?

If so, is there a chance that the sabre/vobject version requirement will be bumped up to higher than 3.3.3?

I tried to install this, but I have plugins that use sabre/vojbect 3.5.3, and the lower version requirement results in this failing to load.

Cal sharing for me is a necessity, any procedures on this would be very much appreciated.

On 6/24/19, Remo Mattei rm@rm.ht wrote:

I would love to see if that works since I have a client that wants cal sharing with his team.

...

Il giorno 24 giu 2019, alle ore 06:17, Mike Burger mburger@bubbanfriends.org ha scritto:

...

On 2019-06-24 02:25, Egoitz Aurrekoetxea wrote: Hi David, Let me provide you a patch and some version locations from where you should start… I’m busy at work now but I’ll try my bests for providing you a version today or tomorrow all these… We planned to upload to GitHub but… I’m overloaded… Let’s talk today at last time of the afternoon, Cheers, EGOITZ AURREKOETXEA Dpto. de sistemas 944 209 470 Parque Tecnológico. Edificio 103 48170 Zamudio (Bizkaia) egoitz@sarenet.es www.sarenet.es [2] Antes de imprimir este correo electrónico piense si es necesario hacerlo.

...

El 21 jun 2019, a las 21:24, David Mehler dave.mehler@gmail.com escribió: Hello, Thanks, CalDAV is another thing i'd like to do as I'd like to sync calendars well maybe share would be a better word. How do I get this going? Thanks. Dave. On 6/21/19, Egoitz Aurrekoetxea egoitz@sarenet.es wrote: Hi David, Is doable. We adapted and old version of calendar/caldav (even with scheduling) plugin from Kolab to work with new versions of Roundcube. I have pending the upload the relevant part of the code to GitHub. Cheers! Egoitz Aurrekoetxea Dpto. de sistemas 944 209 470 Parque Tecnológico. Edificio 103 48170 Zamudio (Bizkaia) egoitz@sarenet.es mailto:undefined www.sarenet.es [1] http://www.sarenet.es/ Antes de imprimir este correo electrónico piense si es necesario hacerlo. El 21 jun 2019, a las 19:18, David Mehler dave.mehler@gmail.com escribió: Hello, Running a roundcube 1.3 setup, and wanting to get a calendar going. Is this doable? Thanks. Dave.

Egoitz,

Is this the kolab/calendar and kolab/libcalendaring pair of plugins?

If so, is there a chance that the sabre/vobject version requirement will be bumped up to higher than 3.3.3?

I tried to install this, but I have plugins that use sabre/vojbect 3.5.3, and the lower version requirement results in this failing to load.

-- Mike Burger http://www.bubbanfriends.org

"It's always suicide-mission this, save-the-planet that. No one ever just stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1 _______________________________________________ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users

---

Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users

Hello,

I am still looking for this as well.

Thanks. Dave.

On 8/1/19, Ulli Heist Ulli.Rainer.Heist@t-online.de wrote:

Hi Egoitz,

is there a working solution to use a calendar within roundcube?

Thanks a lot in advance for your effort and support

Ulli

From: users-bounces@lists.roundcube.net [mailto:users-bounces@lists.roundcube.net] On Behalf Of Egoitz Aurrekoetxea Sent: Monday, June 24, 2019 8:25 AM To: Roundcube Users mailing list users@lists.roundcube.net Subject: Re: [RCU] roundcube calendar

Hi David,

Let me provide you a patch and some version locations from where you should start… I’m busy at work now but I’ll try my bests for providing you a version today or tomorrow all these… We planned to upload to GitHub but… I’m overloaded…

Let’s talk today at last time of the afternoon,

Cheers,

Egoitz Aurrekoetxea

Dpto. de sistemas

944 209 470 Parque Tecnológico. Edificio 103 48170 Zamudio (Bizkaia)

mailto:undefined egoitz@sarenet.es

http://www.sarenet.es www.sarenet.es

Antes de imprimir este correo electrónico piense si es necesario hacerlo.

El 21 jun 2019, a las 21:24, David Mehler <dave.mehler@gmail.com mailto:dave.mehler@gmail.com > escribió:

Hello,

Thanks, CalDAV is another thing i'd like to do as I'd like to sync calendars well maybe share would be a better word.

How do I get this going?

Thanks. Dave.

On 6/21/19, Egoitz Aurrekoetxea < mailto:egoitz@sarenet.es egoitz@sarenet.es> wrote:

Hi David,

Is doable. We adapted and old version of calendar/caldav (even with scheduling) plugin from Kolab to work with new versions of Roundcube. I have pending the upload the relevant part of the code to GitHub.

Cheers!

Egoitz Aurrekoetxea Dpto. de sistemas 944 209 470 Parque Tecnológico. Edificio 103 48170 Zamudio (Bizkaia) egoitz@sarenet.es mailto:egoitz@sarenet.es mailto:undefined www.sarenet.es http://www.sarenet.es/ http://www.sarenet.es/ Antes de imprimir este correo electrónico piense si es necesario hacerlo.

El 21 jun 2019, a las 19:18, David Mehler <dave.mehler@gmail.com mailto:dave.mehler@gmail.com > escribió:

Hello,

Running a roundcube 1.3 setup, and wanting to get a calendar going. Is this doable?

Thanks. Dave. _______________________________________________ Roundcube Users mailing list users@lists.roundcube.net mailto:users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users

---

Roundcube Users mailing list users@lists.roundcube.net mailto:users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users