- Dev - Roundcube mailing lists

Nox Spell Server
by phil 22 Aug '06

22 Aug '06

The Google spell check guy has released his non-Google spell check option, Nox Spell Server. It's a server that runs Python and talks, via a local port, to Aspell - his comments: Nox Spell Server is a little Python Aspell server that is fully compatible with GoogieSpell. If you are concerned over privacy or reliability of Google's spell service, then look no more, because you found your solution Aspell also supports far more languages than Google spell service. http://orangoo.com/labs/?page_id=72 So this is very cool, and exactly what I was looking for, however it does mean that people that want to use it with Roundcube need to run this as a server/service for Roundcube to connect to. Can we include this in Roundcube, but have it in the config where it uses Google by default, and Nox if you call it out within the config? This way RC will work 'out of the box' but also allow you to use your local spell server, once it's config'd. I'm on vacation, but I'll start looking at this later in the week - would like to start testing this right away, if it weren't for this nice beach outside! P -- http://fak3r.com - you don't have to kick it -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

9 13

RC with huge mail box
by Eduardo Meyer 22 Aug '06

22 Aug '06

Hello, I am trying to use RC and it works fine, except for a mail box with around 600MB of e-mail usage. It keeps loading for around 2 minutes and later, gives up. any suggestions? -- =========== Eduardo Meyer pessoal: dudu.meyer(a)gmail.com profissional: ddm.farmaciap(a)saude.gov.br

2 1

IMAP folder name & UTF-8 problem
by Patrick T. Tsang 22 Aug '06

22 Aug '06

Hello All, The IMAP folder may contain naming like this: 1. MyFolder 2. myfolder 3. MyFoLoEr They all different but roundcude always pick the first one if it is on the top of the list. AND, there is no IMAP-UTF-7 to UTF-8 convertion on the IMAP folder. In my test, all my BIG5 IMAP folders cannot be read. may iconv would help. Thanks Patrick

1 0

Tickets assigned to 0.1-stable
by Michael Bueker 21 Aug '06

21 Aug '06

Hi there, if I understood the Roadmap correctly, there shouldn't be any tickets assigned to 0.1-stable, because we want to fix all known bugs until 0.1rc - is that correct? mtu -- Connectio Interruptus ist kein sicherer Schutz vor Viren!

2 1

Inbox issue resolved
by Brennan Stehling 21 Aug '06

21 Aug '06

http://trac.roundcube.net/trac.cgi/ticket/1436357 I diagnosed and resolve the issue, but I do not have Subversion rights. I would appreciate if a committer could review my changes. I have posted the patches as comments on the ticket. -- Brennan Stehling Offwhite.net LLC brennan(a)offwhite.net

2 2

Re: Filtering spam with SpamAssassin header
by Manu 19 Aug '06

19 Aug '06

Rob Smith wrote: > I went back and tried to apply your patch (although slightly modified > for DSPAM instead of SpamAssassin), and it didn't work on the latest > code from the SVN. When I first log in, emails turn green, but then as > soon as I click on any folder, nothing will turn green any more (even if > I just hard code the header check to true). Any clue what could have > happened? I think there's a problem with the cache. I use a field that I suspect not to be saved in the cache. I already mentioned this but nobody gives much attention and I wasn't able to fix it. It should be a matter of minutes for someone that have better understanding of it works. It's just about saving the 'junk' field of the object iilBasicHeader into the cache and retrieve it. Sorry.

4 6

Various issues with 0.1-beta2
by Manu 18 Aug '06

18 Aug '06

1) There's many IE CSS extensions in mail.css. 2) There's CSS typos or something like that line 535 to 537: html>body*#quicksearchbar { background-image: none; } html>body*#quicksearchbar a { top: 5px; } html>body*#quicksearchbar #quicksearchbox { width: 180px; top:0px; right: 1px; left: auto; } Firefox complains : Expected ',' or '{' but found '*'. Ruleset ignored due to bad selector. And there's a missing | and the end of a line. 3) A problem with MySQL ? I got this line hphp[10174]: ALERT - canary mismatch on erealloc() - heap overflow detected (attacker '212.234.8.113', file '/var/www/roundcubemail-0.1beta2/program/lib/DB/mysql.php', line 798) I run PHP 5.1.4 and MySQL 5.0.24 which are the latest versions available for my Gentoo.

1 0

How can I get started with sending in changes?
by Brennan Stehling 18 Aug '06

18 Aug '06

I would like to help with RoundCube development by adjusting a local copy and then submit changes. I have a few barriers I will need to overcome. First, I am not really familiar with how things are handled from a general overview and could use a walk-through. I am also not a big PHP developer. I have mainly worked with Perl, Java and ASP.NET (C# and VB.NET). But I have worked with PHP a bit. You can see an example of something I once did with PHP here... http://brennan.offwhite.net/blog/2004/09/27/phpnuke-feeds-for-rss-20-and-at… Second, I do have a lot of experience with Javascript but I have been working with the popular libraries like Prototype and Scriptaculous. So the custom Javascript I am seeing is not familiar to me here either. I will need a little assistance with getting started with it. One nice piece of Javascript I created is GPlotter. http://gplotter.offwhite.net/ The latest release uses Prototype and it uses an Object Oriented model, so is easier to work with during maintenance. As I reviewed the Javascript for RC it was not clear that there was a OO approach in terms of controlling the UI and handling the mail. I'd like to discuss some ideas with the core team who have been dealing with the UI and Javascript. I think I can be a big help here. I am also familiar with Subversion, so I already have a local copy pulled down and I am watching updates as the come down. I have been hoping to understand the application design by simply reading the code. I have an idea of how things are working, but the coding style is different than my own. I need some time to get comfortable with it. I am interested in doing whatever I can. Let me know if you would be willing to walk me through the PHP architecture or the Javacript. Thanks, -- Brennan Stehling Offwhite.net LLC brennan(a)offwhite.net

1 0

Re: Filtering spam with SpamAssassin header
by Michel Moreira 17 Aug '06

17 Aug '06

Try allowing the roundcube users to set their spam level and actions, and roundcube 'll manage the messages through those rules, no admin panel access 'll be needed.. ;) 2006/8/16, Nipun Jain <jain.nipun(a)gmail.com>: > Well, what I am talking about is that I have set my install in such a way > that if the user receives any email marked as spam by spamassasin, then it > automatically goes into the spam folder and I have roundcube automatically > subscribe to this folder when a new user is created. As for users marking a > mail as spam, thats not possible as to configure spamassasin, you need to re > write subjects which can only be done through the admin panel. > > > On 8/17/06, Michel Moreira <drungrin(a)gmail.com> wrote: > > You, the admin, setup it... and the other users? how about them having > > an friendly interface for setting it that isnt dependant of the server > > software? > > > > 2006/8/16, Nipun Jain < jain.nipun(a)gmail.com>: > > > Well, not exactly. If you got some kinda control panel with your shared > > > hosting, I am pretty sure that you can set spam mail to show up in a > spam > > > folder. If you are using a cPanel based hosting, let me know, I ll > provide > > > you guidance to set it up the way you want. > > > > > > Regards, > > > Nipun Jain. > > > > > > > > > On 8/17/06, Michel Moreira <drungrin(a)gmail.com> wrote: > > > > I dont think that we can rely on the server side software, cause of > > > > shared hostings, dont having access to this stuff and a lot of hosting > > > > issues. > > > > > > > > 2006/8/16, Brennan Stehling < brennan(a)offwhite.net>: > > > > > Yes, it would be great to get the webmail client set up so that it > can > > > actually control the procmail and mailfilter behavior somehow. I > suppose > > > you would need some server-side software to handle that interaction. > > > > > > > > > > Are there any projects which do this? > > > > > > > > > > Brennan > > > > > > > > > > On Wed, 16 Aug 2006 15:07:07 -0400, Mehmet Tolga Avcioglu > > > <mehmet(a)activecom.net> wrote: > > > > > > > > > > > > In my opinion something like this should be setup in the delivery > > > agent > > > > > > (procmail, maildrop). This behavior should be consistent between > > > > > > clients. For example we have a web based configuration tool for > these > > > > > > types of settings which creates the appropriate .mailfilter files > and > > > > > > the MDA does the rest. The behavior is same even is the users logs > in > > > > > > through web client or thunderbird, etc. > > > > > > > > > > > > I would actually like to see the Settings section extended so > these > > > > > > types of server side configurations could be implemented (spam > rules, > > > > > > blacklist, whitelist, vacation, etc.) as additional > > > extensions/modules.?? > > > > > > > > > > > > -- > > > > > > Mehmet Tolga Avcioglu > > > > > > > > > > > > Brennan Stehling wrote: > > > > > >> I would like to adjust RoundCube to automatically place new mail > into > > > > > > the Junk folder if it has a spam ranking from SpamAssassin. > > > > > >> > > > > > >> On my server... > > > > > >> > > > > > >> http://pronto.offwhite.net/antispam.html > > > > > >> > > > > > >> ..I have SpamAssassin set up and it will place the X-Spam-Level > > > header > > > > > > with a set of stars indicating the spam level. I think RoundCube > > > could > > > > > > check the SpamLevel and provide a personal setting to allow the > user > > > to > > > > > > automatically drop spam into the Junk folder. > > > > > >> > > > > > >> Thoughts? > > > > > >> > > > > > >> -- > > > > > >> Brennan Stehling > > > > > >> Offwhite.net LLC > > > > > >> brennan(a)offwhite.net > > > > > >> > > > > > >> > > > > > >> > > > > > -- > > > > > Brennan Stehling > > > > > Offwhite.net LLC > > > > > brennan(a)offwhite.net > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

1 0

Re: Filtering spam with SpamAssassin header
by Brennan Stehling 17 Aug '06

17 Aug '06

Can I even configure procmail to move potential spam into my IMAP Junk folder? I have not seen how that can be done. Brennan On Wed, 16 Aug 2006 21:03:50 +0200, Michael Bueker <m.bueker(a)berlin.de> wrote: > Brennan Stehling wrote: >> I would like to adjust RoundCube to automatically place new mail into > the Junk folder if it has a spam ranking from SpamAssassin. >> [...] >> Thoughts? > > IMHO, this is not Roundcube's task, but that of your MDA (procmail, > maildrop, whichever). > > ~Mik > > -- > A: Why don't they just launch an arial attack? > B: An _arial_ attack! For a moment I was worried it might be a > Times New Roman one! > C: As long as they don't fight a war on two fonts... > - seen on /. -- Brennan Stehling Offwhite.net LLC brennan(a)offwhite.net

3 3

Fix for Bug #1483930
by Michael Bueker 15 Aug '06

15 Aug '06

Hi, I've worked on Bug #1483930 and resolved it thus: There are now two additional labels named "previousmessage" and "nextmessage", which are used in message.html, as opposed to "previousmessages" and "nextmessages" in mail.html. I've included the label entries for en_GB, en_US, de_DE, de_CH and es in the patch. If that's an okay course of action for you, please commit the patch and close the ticket :) Cheers, mtu -- What seems to be the Officer, problem? - From South Park, "Bloody Mary" diff -uNr rc-294/program/localization/de_CH/labels.inc rc-294fix/program/localization/de_CH/labels.inc --- rc-294/program/localization/de_CH/labels.inc 2006-08-06 15:51:22.000000000 +0200 +++ rc-294fix/program/localization/de_CH/labels.inc 2006-08-06 17:15:07.000000000 +0200 @@ -99,7 +99,9 @@ $labels['deletemessage'] = 'In den Papierkorb verschieben'; $labels['printmessage'] = 'Diese Nachricht drucken'; $labels['previousmessages'] = 'Vorherige Nachrichten anzeigen'; -$labels['nextmessages'] = 'Weitere Nachrichten anzeigen'; +$labels['previousmessage'] = 'Vorherige Nachricht anzeigen'; +$labels['nextmessages'] = 'Folgende Nachrichten anzeigen'; +$labels['nextmessage'] = 'Folgende Nachricht anzeigen'; $labels['backtolist'] = 'Zurück zur Liste'; $labels['select'] = 'Auswählen'; diff -uNr rc-294/program/localization/de_DE/labels.inc rc-294fix/program/localization/de_DE/labels.inc --- rc-294/program/localization/de_DE/labels.inc 2006-08-06 15:51:20.000000000 +0200 +++ rc-294fix/program/localization/de_DE/labels.inc 2006-08-06 17:03:49.000000000 +0200 @@ -100,7 +100,9 @@ $labels['deletemessage'] = 'In den Papierkorb verschieben'; $labels['printmessage'] = 'Diese Nachricht drucken'; $labels['previousmessages'] = 'Vorherige Nachrichten anzeigen'; -$labels['nextmessages'] = 'Weitere Nachrichten anzeigen'; +$labels['previousmessage'] = 'Vorherige Nachricht anzeigen'; +$labels['nextmessages'] = 'Folgende Nachrichten anzeigen'; +$labels['nextmessage'] = 'Folgende Nachricht anzeigen'; $labels['backtolist'] = 'Zurück zur Liste'; $labels['select'] = 'Auswählen'; diff -uNr rc-294/program/localization/en_GB/labels.inc rc-294fix/program/localization/en_GB/labels.inc --- rc-294/program/localization/en_GB/labels.inc 2006-08-06 15:51:20.000000000 +0200 +++ rc-294fix/program/localization/en_GB/labels.inc 2006-08-06 16:56:16.000000000 +0200 @@ -99,7 +99,9 @@ $labels['deletemessage'] = 'Move message to trash'; $labels['printmessage'] = 'Print this message'; $labels['previousmessages'] = 'Show previous set of messages'; +$labels['previousmessage'] = 'Show previous message'; $labels['nextmessages'] = 'Show next set of messages'; +$labels['nextmessage'] = 'Show next message'; $labels['backtolist'] = 'Back to message list'; $labels['viewsource'] = 'Show source'; diff -uNr rc-294/program/localization/en_US/labels.inc rc-294fix/program/localization/en_US/labels.inc --- rc-294/program/localization/en_US/labels.inc 2006-08-06 17:09:45.000000000 +0200 +++ rc-294fix/program/localization/en_US/labels.inc 2006-08-06 16:58:43.000000000 +0200 @@ -98,7 +98,9 @@ $labels['deletemessage'] = 'Move message to trash'; $labels['printmessage'] = 'Print this message'; $labels['previousmessages'] = 'Show previous set of messages'; +$labels['previousmessage'] = 'Show previous message'; $labels['nextmessages'] = 'Show next set of messages'; +$labels['nextmessage'] = 'Show next message'; $labels['backtolist'] = 'Back to message list'; $labels['viewsource'] = 'Show source'; diff -uNr rc-294/program/localization/es/labels.inc rc-294fix/program/localization/es/labels.inc --- rc-294/program/localization/es/labels.inc 2006-08-06 15:51:22.000000000 +0200 +++ rc-294fix/program/localization/es/labels.inc 2006-08-06 17:05:28.000000000 +0200 @@ -103,7 +103,9 @@ $labels['deletemessage'] = 'Mover mensaje a la papelera'; $labels['printmessage'] = 'Imprimir este mensaje'; $labels['previousmessages'] = 'Mostrar mensajes anteriores'; +$labels['previousmessage'] = 'Mostrar mensaje anterior'; $labels['nextmessages'] = 'Mostrar mensajes siguientes'; +$labels['nextmessage'] = 'Mostrar mensaje siguiente'; $labels['backtolist'] = 'Volver a la lista de mensajes'; $labels['viewsource'] = 'Mostrar código'; diff -uNr rc-294/skins/default/templates/message.html rc-294fix/skins/default/templates/message.html --- rc-294/skins/default/templates/message.html 2006-08-06 15:51:29.000000000 +0200 +++ rc-294fix/skins/default/templates/message.html 2006-08-06 17:26:15.000000000 +0200 @@ -11,9 +11,9 @@ <roundcube:include file="/includes/header.html" /> <div id="messagecountbar"> -<roundcube:button command="previousmessage" imageSel="/images/buttons/previous_sel.png" imageAct="/images/buttons/previous_act.png" imagePas="/images/buttons/previous_pas.png" width="11" height="11" title="previousmessages" /> +<roundcube:button command="previousmessage" imageSel="/images/buttons/previous_sel.png" imageAct="/images/buttons/previous_act.png" imagePas="/images/buttons/previous_pas.png" width="11" height="11" title="previousmessage" />  <roundcube:object name="messageCountDisplay" />  -<roundcube:button command="nextmessage" imageSel="/images/buttons/next_sel.png" imageAct="/images/buttons/next_act.png" imagePas="/images/buttons/next_pas.png" width="11" height="11" title="nextmessages" /> +<roundcube:button command="nextmessage" imageSel="/images/buttons/next_sel.png" imageAct="/images/buttons/next_act.png" imagePas="/images/buttons/next_pas.png" width="11" height="11" title="nextmessage" /> </div> <div id="messagetoolbar">

1 1

Re: Sorting Support in IMAP
by Eric Stadtherr 15 Aug '06

15 Aug '06

2 2

Sorting Support in IMAP
by Kevin Landers 15 Aug '06

15 Aug '06

I am wondering what kind of look up or test RoundCube does in order to decide whether or not it will allow the user to use the sorting function at the top of the columns in your mail folders. I have had the problem with quotas in the past, where RoundCube's initial look for Quota support in IMAP failed, even though Quota support does exist. So I had to comment out the checks for the Quota support in order to force RC to just go ahead and use the Quota functions. I am wondering if RC is doing a similar lookup in reference to sorting. I have logged in using Brett's RC 0.1 Beta 2 demo install. I logged into a demo account provided by "SKaero" on the RC forums. When I use his demo email account, the sorting features are present in each column. However, I then logged out and logged back in using my own account on my own server and I do not receive any sorting options. Where should I look to resolve this issue? Anyone have any insights? Thanks in advance, Kevin L.

2 3

New Template Command
by Brett Patterson 14 Aug '06

14 Aug '06

Hi all. After a user on the forum (Flash) tried to easily add a variable into a template. He tried many things, and I devised a nice template way of doing it. You can see the steps to do so here: http://roundcubeforum.net/forum/index.php?topic=342.msg1887#msg1887 It works as expected in the following manner: <roundcube:variable name="variableName" /> As with PHP, variableName != VariableName != VARIABLENAME != vArIaBlEnAmE != . . . so the name is case sensitive. This allows users to add variables they want in to their skin easily. Not sure if you want to add this or not, but I thought I'd put it on the table as an option for the beta3 or rc1 release (whichever naming convention you want to go with). ~Brett

1 0

attachment problem
by George Wu 12 Aug '06

12 Aug '06

There is a bug with roundcube where attachments don't get correctly displayed. This happens when a user sends email with an attachment via Apple Mail client to a user using roundcube. Although the email is viewable there is no attachment. Forwarding and saving to drafts correctly displays an attachment as well as forwarding to anyone else. diff -uNr rev304/roundcubemail/program/steps/mail/func.inc rev304-fixed/program/steps/mail/func.inc --- rev304/roundcubemail/program/steps/mail/func.inc 2006-08-08 16:27:06.000000000 -0700 +++ /var/www/lolamail/program/steps/mail/func.inc 2006-08-09 10:53:10.000000000 -0700 @@ -426,7 +426,8 @@ $message_icon = $attrib['messageicon']; // set attachment icon - if ($attrib['attachmenticon'] && preg_match("/multipart\/m/i", $header->ctype)) +// if ($attrib['attachmenticon'] && preg_match("/multipart\/m/i", $header->ctype)) + if ($attrib['attachmenticon'] && preg_match("/multipart\//i", $header->ctype)) $attach_icon = $attrib['attachmenticon']; $out .= sprintf('<tr id="rcmrow%d" class="message%s%s %s">'."\n", @@ -875,7 +876,8 @@ } // message contains multiple parts - else if ($message_ctype_primary=='multipart' && is_array($structure->parts)) + // else if ($message_ctype_primary=='multipart' && is_array($structure->parts)) + if ($message_ctype_primary=='multipart' && is_array($structure->parts)) { foreach ($structure->parts as $mail_part) { I've commented out the lines in question that cause this bug and replaced them with lines that do show the attachment. Is there a reason why lines 813 and down aren't under line 878 (i.e. nested if)? Also I can send out an email via Apple Mail if anyone is interested. Basically Apple Mail uses multipart/alternative as default and an attachment is contained after it. - George

1 1

Encoding problem
by Jan Mikus 12 Aug '06

12 Aug '06

There is encoding problem in headers with central european characters. Recipient address "Jan Mikuš <mikus(a)itcomputers.cz>" after encoding return "=?UTF-8?Q?Jan=20Miku=C5=A1=20<mikus(a)itcomputers.cz>?=" (right is "=?UTF-8?Q?Jan=20Miku=C5=A1?= <mikus(a)itcomputers.cz>") and Postfix this header encode to "=?UTF-8?Q?Jan=20Miku=C5=A1=20 <mikus(a)itcomputers.cz>,\n ?=(a)arachne.itcomputers.cz".

3 2

Alert message when attaching a file to a mail
by Ian 11 Aug '06

11 Aug '06

Hello, Since I updated Roundcube with the second beta, a JS alert() with some obscure HTML code is shown every time I upload an attachment. The file is uploaded correctly, I think this message was just used for debugging purpose. It can be removed by removing the line 2189 of the file "program/js/app.js". (the one with "alert(content)") Ian

2 1

Re: Addressbook database (was Re: Ticket #1332930 (Feature Requests))
by Eric Stadtherr 11 Aug '06

11 Aug '06

Brett, I have to disagree - XML is not meant for persistent storage of application data. You sacrifice referential integrity and efficient query capability if you just store everything as long text documents. Sure, the code to parse and transform it is easy, but the runtime cost of parsing through a complicated XML document for a single value in a single context is significant. Picture the popup address completion list taking 3-5 seconds to fill itself out when you start typing a name into the "Recipient" field... As an aside, if we do ever end up wanting to represent contact information in XML, there's a schema out there already for it: http://www.jabber.org/jeps/jep-0054.html -Eric > Eric Stadtherr wrote: >> >> I would suggest a database schema such as the following (let me know >> if my HTML table doesn't come across correctly): >> >> <snip> >> >> This would make it easily mappable to vCard contents without being too >> locked into vCard specifics. The "Field" column keeps you from having >> "n" columns for "n" bits of information (and saves space if only a >> subset of the fields are provided for a contact). The labels would map >> reasonably well to vCard parameters, while maintaining semantic >> consistency with tools like Apple's Address Book. Primary Key could be >> a simple surrogate key assigned to each row, or a compound key >> consisting of (Contact ID, Field, Label). The compound key would be >> more intuitive, but may cause implementation problems if the database >> provider doesn't like NULL values in the PK. Indexes could be built on >> any combination of columns to optimize searching. >> >> What do you think? >> >> -Eric >> >> >> >> On Thu, 10 Aug 2006 20:07:52 +0200, Thomas Bruederli wrote: >> >> Eric Stadtherr wrote: >> > Should rev306 be backed out then? It goes against this concept. >> > >> Well, my explanations haven't been clear enough when I talked to >> Tobias... I'll take care of that, but it definitely goes against my > ideas. >> >> I don't see any reason to have lots of fields in the database if we >> choose a format that can be parsed fast and allows us interchange > the >> data with other formats for import/export/sync. If searching the >> contacts gets a problem I suggest to create a fulltext index with > all >> field values required for search. >> >> Please don't hesitate to post your opinions to the > addressbook/database >> design. >> >> Regards, >> Thomas >> > Upon that note, why not use XML... it's what it's meant for. Instead of > another table to hold contacts, or multiple rows per contact, just store > XML data in one field. Then you can have X number of attributes of any > vCard or whatever format. It's easily parsable in PHP and can be > exported in a number for formats. It may even be quicker ;) > > <?xml version="1.0" encoding="ISO-8859-1"?> > <contacts> > <contact> > <fullname>FN</fullname> > <email type="home">fname(a)site.domain</email> > <email type="work">full.name(a)company.com</email> > <tele type="fax">+1 011-555-1234</tele> > </contact> > <contact> > <fullname>FN2</fullname> > <email type="home">someone(a)somewhere.de</email> > <tele type="work">+1 234-555-6666</tele> > </contact> > </contacts> > > Something like that would work wouldn't it? Obviously all the values > would be wrapped inside of <![CDATA[ ]]> tags... > > ~Brett

1 0

UTF7 - UTF8 folder encoding errors
by Eric Liang 11 Aug '06

11 Aug '06

Hello, I think the functions for UTF7-UTF8 encoding/decoding are not performing well, especially on the folders (view/create/rename folder). This happens mostly on non ISO-8859-1 charsets (in the source it shows that this function is not yet done). Is there a chance we get IMP's enc/decoding functions and use those instead? They work nicely in any system I tested IMP on. If someone wants privately to work with me on this issue please contact me directly. I am willing to spend a lot of my time in testing and debugging. I tried to fix this myself but I'm not good enough and even though I managed to decode folders fine (these folders contained foreign chars created by other programs) I messed things up with other functions. So basically I need someone who knows what he's doing in order to fix this together. Also, I propose that wherever needed, we should make the charset conversion assumptions configurable by the admin and not have them hardcoded to ISO-8859-1. If someone wants to work on this with me (I have a test system showcasing the issues which can be used for testing the fixes as well) please contact me directly. Thanks, Eric

3 6

Integrated spelling - how to get results?
by Martin Moeller 10 Aug '06

10 Aug '06

Hello folks. I'm handling the Danish translations and just learned of this this so I thought I'd join in. RoundCube 0.1beta2 is up and running great (with Danish translations and all), but no matter how badly I misspell words and try to check them for correctness, RoundCube always ends up saying that there were no errors. This happens with both Danish and English text and the language chosen appropriately from the menu. I assume the actual POST of the textarea is a client event? I didn't have HTTPS out allowed on the server but even when I do, it doesn't seem to work. There shouldn't be any blocks on my local machine, though... It is supposed to contact google.com as far as I can tell and that should now be allowed whether client or server-side. Anyone else seeing this? This is with Firefox 1.5.x. I tried the orange<whatsitsname> speller. That was in konqueror but it worked correctly.. Just tested that same page in Firefox, works fine... This is the link: http://orangoo.com/labs/?page_id=72 Good ideas would be greatly appreciated. It would be really nice to have that type of spell-checking available in webmail... /Martin.

3 2

Ticket #1332930 (Feature Requests)
by jonathan＠robertsonstudios.net 09 Aug '06

09 Aug '06

I believe this request would fit best under Ticket #1332930 (Feature Requests). I could really use additional information under the contact such as: multiple phone fields - home, work, cell, alt multiple email address fields - work, home, alt multiple street or mailing addresses - work, home, alt notes field I think it would work to have free text fields handling up to the standard 255 characters, and have a table of custom fields and allow the users to determine what details they want to be added for each contact. Maybe a template that could be designed... hmm... that's a bit overkill for now. So 2 phone numbers, 2 email addys, a street address, and a notes field would be awesome! Next topic... formatting / auto formatting On the add contact screen, the add should be before the cancel / clear button whatever it was. I've only been using roundcube for about an hour or so and I LOVE IT!!! This is EXACTLY what I was looking for... and have been searching for a month or so for. The first and last name fields should be moved to above the display name, and have the display name auto fill with the first and last name of the contact. Maybe in the future have this as an option for the users to determine what format they want the display name to be in. Thanks and keep up the GREAT work!!! Jonathan

2 1

SMTP (+auth) confusing issues...
by Patrick 09 Aug '06

09 Aug '06

Hiya, I've got a small problem, i'm using the beta, on a gentoo server, with php 5.1.1 ( with sockets ), and i setup round cube to use smtp as follows : $rcmail_config['smtp_server'] = 'smtp.myhost'; $rcmail_config['smtp_port'] = 25; $rcmail_config['smtp_user'] = '%u'; $rcmail_config['smtp_pass'] = '%p'; $rcmail_config['smtp_auth_type'] = ''; $rcmail_config['smtp_log'] = TRUE; ( of course with my real mail host. :) ) and i try send mail from roundcube, and well... it umm... just ... vanishes :P i sent a test message to test123(a)hotmail.com, just to create entries in my log file, unix01 webmailBeta # grep test123 /var/log/* unix01 webmailBeta # so, it's not falling back to mail() nor is it working with smtp : root@mx01:~# grep test123\(a)hotmail.com /var/log/mail.log root@mx01:~# root@mx02:/etc/postfix# grep test123\(a)hotmail.com /var/log/mail.log root@mx02:/etc/postfix# so i'm pretty much stumped, it appears in my imap folder, and it says it's sent, and in the logs directory i've got a sendmail log with the following line in it : [22-Mar-2006 13:51:48 +0200] User: 21 on 196.36.11.162; Message for test123(a)hotmail.com; Subject: (no subject) so, any ideas ? P

2 2

RoundCube Translation - pt_BR
by Robson F. Ramaldes 09 Aug '06

09 Aug '06

Hi I updated the missing lines of the pt_BR translation and changed some phrases http://www3.netnew.com.br/pt_BR.tar.gz Hope you Like it Thanks

1 0

RoundCube Webmail Translation
by Thomas Bruederli 09 Aug '06

09 Aug '06

Hi everybody, You receive this mail because you once contributed localized texts to the RoundCube webmail project. We're about to release 0.1beta2 with some new features such as drafts saving, spell checking and message searching. Therefore, new texts have been added to the default (English language) and those now need to be translated. Our wiki provides a list of labels and messages that were added since the last release (0.1beta) and which should make it easier for you to translate the missing texts: http://trac.roundcube.net/trac.cgi/wiki/Loc_Newlabels The latest version of the English localization can be downloaded here: http://trac.roundcube.net/trac.cgi/browser/trunk/roundcubemail/program/loca… Please update your localized files and send them back to me, saved as UTF-8 and packed in an archive (zip, tar, etc.) Many thanks! Thomas

3 2

ERROR 1060 at line 5: Duplicate column name 'ip'
by Justin Frydman 09 Aug '06

09 Aug '06

Getting this when trying to upgrade my database with the latest mysql.update.sql seems like they arn't doing proper overwriting of the db's? Anyone have a quick fix for this besides editing the entire sql file? Justin

2 1

Backend Translation
by Rob Gil 08 Aug '06

08 Aug '06

http://trac.roundcube.net/trac.cgi/ticket/1483937 Thoughts? ~Rob

1 0

Fix for Bug #1483921
by Michael Bueker 07 Aug '06

07 Aug '06

Hi, someone please commit this and close ticket #1483921! Thanks, mtu -- What seems to be the Officer, problem? - From South Park, "Bloody Mary" diff -uNr rc-293/program/steps/mail/func.inc rc-293fix/program/steps/mail/func.inc --- rc-293/program/steps/mail/func.inc 2006-08-06 14:38:59.000000000 +0200 +++ rc-293fix/program/steps/mail/func.inc 2006-08-06 15:17:33.000000000 +0200 @@ -1473,7 +1473,7 @@ $attrib['src'] = './?'.str_replace('_frame=', ($ctype_primary=='text' ? '_show=' : '_preload='), $_SERVER['QUERY_STRING']); $attrib_str = create_attrib_string($attrib, array('id', 'class', 'style', 'src', 'width', 'height')); - $out = '<iframe '. $attrib_str . "></ifame>"; + $out = '<iframe '. $attrib_str . "></iframe>"; return $out; }

2 1

folder display: nasty bug in svn-293
by Michael Bueker 07 Aug '06

07 Aug '06

Hi, folder nesting beyond one level is broken in svn-293. In svn-282, my folders are listed correctly: Lists --FOSS ----Roundcube ------devel ------users In svn-293, they look like this: Lists --FOSS --devel --users --roundcube cheers, mtu -- Steht ` oder ´ als Apostroph, gibt's typografisch eine Katastroph'

3 5

Updated dutch translation/ lost trac/svn password
by Mark 07 Aug '06

07 Aug '06

Hi all, I've updated the dutch translation for the coming release. Only thing is I forgot my password for my svn/ trac account. Can someone reset it for me, because I can't find a passmailer link in trac and Thomas seems busy or overlooking my email.... the account name is mmoses. I've attached the updated translation files. If no one can reset my account password, will you commit at least these translation files? (they go in nl_NL dir) I hope you guys can help me out. Regards, Mark Moses

2 1

Re: Customising RoundCubeMail
by Brett Patterson 06 Aug '06

06 Aug '06

Alexis Domjan wrote: > Hello, > > I'm using roundcubemail for a while and up to now it is really one of > the best I ever installed. > > We're a ISP company in switzerland offering one of the first green > hosting and email and I was looking for a Webmail for our customer. > After a lot of tests with IMP, Neomail, etc. I finally found RC and just > adopted it :-) > > Now, I would need some customisation in the webmail (more than changing > the skin). I would need mainly two things: > > - a part where users can send SMS (quota and configuration is managed > in a postgresql database). This part could include a place where > the user can change his cellphone number. An idea would also be > that the contact list would include the gsm number, then a user > could send an sms using the list of his contacts. > Best bet here would be to hire an independent coder to look at the source and add what you need. Unless someone in the community would want to take this on. I know adding fields in the user info section has been done (search the forums) before. > - a part where users can change their pop3/imap password and > de/activate a vacation (also managed in a postgresql database) > This is taken care of already with a patch from a fellow user. Just search for it on the forums ;) > Of course this is very specific, but I wanted to know if it could have > some interests for other RC users before I try to implement that. And if > RC developers are interested it would also be better, as I don't know RC > code at all :-) > > I'm looking forward for interests :-) > > Kind regards, > ~Brett www.roundcubeforum.net

1 0

Trac #1483932
by Martin Marques 06 Aug '06

06 Aug '06

Before setting up beta2, could someone more into JS and AJAX take a look at this bug I just reported: #1483932 -- --------------------------------------------------------- Lic. Martín Marqués | SELECT 'mmarques' || Centro de Telemática | '@' || 'unl.edu.ar'; Universidad Nacional | DBA, Programador, del Litoral | Administrador ---------------------------------------------------------

2 2

Committing to SVN
by Michael Bueker 05 Aug '06

05 Aug '06

Hi there, I've been embarassed to ask so far, but... ;-) Are only certain authorized people allowed to commit to SVN? Or could I do so with my trac account? Cheers, mtu -- EMS (n): Emergency Medical Service; often summoned in cases of apoplexy induced by attempts to understand extended, expanded, or enhanced memory specs.

1 0

Finalizing release
by Thomas Bruederli 05 Aug '06

05 Aug '06

Hi everybody I guess we're close to finish the 0.1beta2 release. Just added a release date and I'll advice you to commit all your changes till Saturday, 06 August, 12.00 CET. ~Thomas

2 2

Javascript error for attachment with quote in name
by Mark 05 Aug '06

05 Aug '06

Hi you all, I was playing with revision 292 and I found this on firefox (1.5.0.4 linux): javascript console: ---------------------------------------------------------------- Error: missing ) after argument list Source File: http://www.katmoda.com/rc-test/trunk/roundcubemail/?_task=mail&_action=uplo… Line: 22, Column: 60 Source Code: parent.rcmail.add2attachment_list('02 3 Doors Down - When I'm Gone (Intro).mp3','<a href="#" onclick="rcmail.command(\'remove-attachment\',\'02 3 Doors Down - When I'm Gone (Intro).mp3\')" title="Verwijder"><img src="skins/default/images/icons/remove-atta ---------------------------------------------------------------- You can't see it in the above paste but the error is right after the quote in the filename. Above happens when there is a quote in the filename of the attachment. Can you guys confirm this bug? Mark

1 0

Fwd: Roundcube merger - Ideas from atmail
by Thomas Bruederli 04 Aug '06

04 Aug '06

Hi everybody, Just wanted to forward a mail I've got yesterday and would like to hear your opinions about this topic. Either this could make RoundCube grow faster or atmail just wants to get rid of some (more and more serious) competition. Don't panic, I didn't decide anything yet and I don't want to get rich anyway :-) Regards, Thomas ---------- Forwarded message ---------- From: Ben Duncan Date: 25.07.2006 09:06 Subject: Roundcube merger - Ideas from atmail To: roundcube(a)gmail.com Hello Thomas, Ben Duncan here, I emailed you earlier this year about doing some consulting work for @Mail in Australia but it seemed you were busy. Just as a quick intro, I'm the founder of @Mail, a WebMail/Email-server project I first started in 1998. We are based in Australia and run a business with about 6 people, supporting the @Mail product as our main focus. Our site is at: http://atmail.com/ We'd like to propose a business deal to merge Roundcube with our @Mail product. In summary we'd like to fork an open-source version of @Mail, and use the current Roundcube product as leverage for the open-source offering. We would then continue developing @Mail as the full commercial copy with added features; while running a decent quality open-source version as incentive for people to use our commercial copy. We can offer you a reasonable fee to purchase the license of Roundcube, the site, and for the effort you have contributed to the project. We'd also be very interested if you could spear-head the development of our open-source @Mail product that would be merged into Roundcube and offered to the open-source community. If you are available we'd love you to consult our company in Australia for 1-3 months on the development of @Mail and merging the two products for the open source offering. We could propose a deal for the merger and pay you for consulting our company for the desired time you'd like to visit Australia. Let me know if you are open to any business deals, and I can submit a proposal for you. Kind regards, Ben Duncan

17 20

on the subject of folders
by Chuck, Charlie and Charles 04 Aug '06

04 Aug '06

I was looking around the folders code and discovered a minor bug. If you create a folder with a dot in it (like test.box) RC will display a folder called test with a box sub-folder. That is all as it should be. The problem is that it allows you to drag and drop messages into the phantom folder and displays it as if it were a real folder. When you drag into the folder the message appears to go away, and of course doesn't appear in the phantom folder. When you refresh the folder that you dragged the message from the message reappears (which is good - at least it isn't lost forever). What should happen is that the phantom folder should be greyed out, and undraggable (and probably unselectable). When you query IMAP for the folder list, it helpfully tags that folder as Noselect, but we don't do anything with that tag, or for that matter with any other tags (including such useful ones as HasChildren and HasNoChildren). I propose rewriting the folder getting routines to pass all of the tags through to the roundcube "layer" so that we can decide what to do about the presentation of these folders. This requires the modification of iil_C_ListSubscribed in lib/imap.inc as well as _list_mailboxes and list_mailboxes in rcube_imap, and the various functions that call those functions (about 6 or so). So my question is does anyone have any reservations about me going ahead with this, and does anyone anticipate any cross IMAP server problems? -Charles

5 7

New(?) Sorting Problem
by Jim Pingle 04 Aug '06

04 Aug '06

I updated from SVN version 285 to 288, and in doing so I now have problems with the message sort order on BincIMAP. It's working fine on my Courier server. What happens is that the messages in the inbox are in random order, even though the "date" column header is highlighted. If it refreshes to check new mail and finds something, it does go at the top. However, once you reload the page the messages return to their previous order. The order doesn't correspond to any discernible pattern. If I move back and forth between pages, the messages stay in the same order. BincIMAP does not support server-side sorting, so the usual sort functions in Roundcube are disabled (column headers are not clickable.) Perhaps there needs to be an additional capability check that can default back to client-side sorting in this case? I really, really wish I didn't have to deal with BincIMAP, but I guess it does help to hunt down bugs in lesser-used code paths... Jim

6 14

More sorting fun
by Michael Bueker 04 Aug '06

04 Aug '06

Hi there! Just to add to the fun of the current debate on sorting, I'd like to say that I'd _very_ much like to be able to a) choose whether the latest mails appear on top on on the bottom of the list (also for multi-page sorting) b) choose individual pages for large folder listings Additionally, there's a little glitch in the message view: When viewing a single message, the tooltip of the button that gets to the next message says "display next set of messages" (same for previous). That should probably just say "message". Cheers! mtu

3 3

Re: Hierarchical folders (Rev 290)
by Chuck, Charlie and Charles 04 Aug '06

04 Aug '06

Brett Patterson wrote: > Actuallly, you could use lists, you just have to nest the next <ul> > element inside the previous <li> element. So the <ul> becomes a child > of the <li> > > Keep the same style, and the sub-<ul> element has the same widht and > height as the other folders. The only difference would be padding for > text and the icon ;) You pad the left so it "indents" the text and > display block the entire link and voila!! you have a row that highlights!! That's exactly as it was, and it wasn't working: <ul> <li id="inbox">inbox <ul> <li id="inbox.stuff">stuff</li> </ul> </li> </ul> In this (above) scenario, whenever you change the style of "inbox" you change the style of all of it's sublists. I changed it to: <ul> <li id="inbox">inbox</li> <ul> <li id="inbox.stuff">stuff</li> </ul> </ul> Which appeared to look and act as it was supposed to, but as Thomas correctly pointed out, it's not valid HTML, it just happens that the browsers support it anyway. Perhaps I don't understand what you're proposing. If that's the case, perhaps some sample HTML would help. -Charles PS. Obviously there are myriad solutions to this problem in HTML, but one that works without having to completely rewrite: http://trac.roundcube.net/trac.cgi/browser/trunk/roundcubemail/program/step… would be ideal.

1 0

Validation
by Brett Patterson 04 Aug '06

04 Aug '06

Since Charles "broke" the validation with his sub-folder highlighting stuff, I also noticed that in general, Roundcube won't validate because of the "search" type of input. XHTML 1.0 Transitional DTD: link <http://www.w3.org/TR/xhtml1/dtds.html#dtdentry_xhtml1-strict.dtd_InputType> > <!ENTITY % InputType > "(text | password | checkbox | > radio | submit | reset | > file | hidden | image | button)" > > > >  > > <!ELEMENT input EMPTY>  > <!ATTLIST input <http://www.w3.org/TR/xhtml1/dtds.html#dtdentry_xhtml1-strict.dtd_input> > %attrs; <http://www.w3.org/TR/xhtml1/dtds.html#dtdentry_xhtml1-strict.dtd_attrs> > %focus; <http://www.w3.org/TR/xhtml1/dtds.html#dtdentry_xhtml1-strict.dtd_focus> > type %InputType; <http://www.w3.org/TR/xhtml1/dtds.html#dtdentry_xhtml1-strict.dtd_InputType> "text" > name CDATA #IMPLIED > value CDATA #IMPLIED > checked (checked) #IMPLIED > disabled (disabled) #IMPLIED > readonly (readonly) #IMPLIED > size CDATA #IMPLIED > maxlength %Number; <http://www.w3.org/TR/xhtml1/dtds.html#dtdentry_xhtml1-strict.dtd_Number> #IMPLIED > src %URI; <http://www.w3.org/TR/xhtml1/dtds.html#dtdentry_xhtml1-strict.dtd_URI> #IMPLIED > alt CDATA #IMPLIED > usemap %URI; <http://www.w3.org/TR/xhtml1/dtds.html#dtdentry_xhtml1-strict.dtd_URI> #IMPLIED > onselect %Script; <http://www.w3.org/TR/xhtml1/dtds.html#dtdentry_xhtml1-strict.dtd_Script> #IMPLIED > onchange %Script; <http://www.w3.org/TR/xhtml1/dtds.html#dtdentry_xhtml1-strict.dtd_Script> #IMPLIED > accept %ContentTypes; <http://www.w3.org/TR/xhtml1/dtds.html#dtdentry_xhtml1-strict.dtd_ContentTyp…> #IMPLIED > > So that won't validate since in XHTML 1.0, "search" isn't a valid input type :( Even the XHTML 1.1 spec doesn't have "search" as an input type: > <!ENTITY % input.attlist "INCLUDE" > > <![%input.attlist;[ > <!ENTITY % InputType.class > "( text | password | checkbox | radio | submit > | reset | file | hidden | image | button )" > > >  > <!ATTLIST %input.qname; > %Common.attrib; > type %InputType.class; 'text' > name CDATA #IMPLIED > value CDATA #IMPLIED > checked ( checked ) #IMPLIED > disabled ( disabled ) #IMPLIED > readonly ( readonly ) #IMPLIED > size %Number.datatype; #IMPLIED > maxlength %Number.datatype; #IMPLIED > src %URI.datatype; #IMPLIED > alt %Text.datatype; #IMPLIED > tabindex %Number.datatype; #IMPLIED > accesskey %Character.datatype; #IMPLIED > accept %ContentTypes.datatype; #IMPLIED > > I know Safari is supporting this, and with it the "results" attribute, but it won't validate. Not sure if you're working off of a different spec or not. Just thought I'd point it out ;) ~Brett

1 0

News from atmail?
by Michael Bueker 04 Aug '06

04 Aug '06

Hey, Over the last weeks, I've been anxious for news about the atmail offer and Thomas' decision about it. Is there anything new? mtu -- Linux is now being used by the US Military - brought to you by Private Network, Major Distribution, Colonel Panic and General Protection Fault.

1 0

Hierarchical folders (Rev 290)
by Thomas Bruederli 04 Aug '06

04 Aug '06

Hi Charles, I saw that you changed the list structure of the mailbox list. Now the HTML does not validate anymore because ULs cannot be nested directly within ULs. It seems to solve the highlighting problem but I'm not sure if all browsers will still display it correctly. I've tried it out with Firefox 1.5, Safari and Opera and could not detect any problems so far. If it works, we can turn a blind eye but actually I'm not very happy with this solution. Alternatively we could apply all styles to the a-tag instead of the li. Any thoughts? Regards, Thomas

2 1

Turkish Translation (with new labels)
by Hasan Cansız 02 Aug '06

02 Aug '06

New labels are translated. But i can't translate these labels. $labels['returnreceipt'] = 'Return receipt'; $labels['revertto'] = 'Revert to'; <a href=http://cansiz.info/rc/turkish_new.zip>http://cansiz.info/rc/turkish_new.zip</a> _____________________________________________________ Yahoo! kullaniyor musunuz? Simdi, 1GB e-posta saklama alani sunuyor http://tr.mail.yahoo.com

1 0

Return receipt checkbox/message overlaps Priority select box on Compose message
by Vahan Yerkanian 01 Aug '06

01 Aug '06

Greetings all, There is a minor visual bug with the "Return receipt" checkbox/message in Compose message screen, overlaping the Priority select box (f.e. in Armenian version) when the contents of the select box are long enough. Best regards, Vahan

1 0

svn 284
by Brett Patterson 01 Aug '06

01 Aug '06

Hey Thomas and Charles, perhaps one of you could look into the sorting issue with the latest SVN. Just got it to play with the highlighting, and noticed some things wrong: 1.) Sorting by anything doesn't work. 2.) Highlighting is good but there is an issue: -- Firefox (WIndows) won't switch between "active" and "inactive" for me Other than that, great work. Can't wait for the next beta!! ~Brett Patterson www.roundcubeforum.net Roundcube Forum Admin

4 4

folders patch
by Charles McNulty 01 Aug '06

01 Aug '06

Here's a pretty simple patch for doing the drag over a folder thing. The other thing it does is keeps track of whether the "folder" portion of the screen or the "mail" portion of the screen has the "focus" and changes the color accordingly. For example if you've clicked on the Inbox folder, the folder will be colored red. If you then select a message, the Inbox folder will now be highlighted in grey and the message you've selected will be red. If you click back on to the Inbox folder, the message you've selected will turn grey and "Inbox" will turn back red. If you go back to the message list, select a message and drag it over the folder list, the folder's will turn red as your mouse hovers over them. I've tested this a little, but of course it could always use more testing. Please let me know your thoughts on this patch. -Charles Index: program/js/app.js =================================================================== --- program/js/app.js (revision 274) +++ program/js/app.js (working copy) @@ -244,7 +244,6 @@ // load body click event document.onmousedown = function(){ return rcube_webmail_client.reset_click(); }; document.onkeydown = function(e){ return rcube_webmail_client.key_pressed(e, msg_list_frame); }; - // flag object as complete this.loaded = true; @@ -285,6 +284,14 @@ } } + if (this.gui_objects.mailboxlist) { + var s_mbox = String(this.env.mailbox).toLowerCase().replace(this.mbox_expression, ''); + var mbox_li = document.getElementById('rcmbx'+s_mbox); + + if (mbox_li) + this.set_classname(mbox_li, 'unfocused', true); + } + this.in_message_list = true; e.cancelBubble = true; }; @@ -1161,9 +1168,10 @@ // onmouseup handler for mailboxlist item this.mbox_mouse_up = function(mbox) { - if (this.drag_active) + if (this.drag_active){ + this.unfocus_mailbox(mbox); this.command('moveto', mbox); - else + } else this.command('list', mbox); return false; @@ -1529,8 +1537,7 @@ if (this.env.search_request) add_url += '&_search='+this.env.search_request; - if (this.env.mailbox!=mbox) - this.select_mailbox(mbox); + this.select_mailbox(mbox); // load message list remotely if (this.gui_objects.messagelist) @@ -1634,7 +1641,26 @@ return true; }; - + this.focus_mailbox = function(mbox) { + if (this.gui_objects.mailboxlist && this.drag_active) { + var s_mbox = String(mbox).toLowerCase().replace(this.mbox_expression, ''); + var mbox_li = document.getElementById('rcmbx'+s_mbox); + + if (mbox_li) + this.set_classname(mbox_li, 'selected', true); + } + } + + this.unfocus_mailbox = function(mbox) { + if (this.gui_objects.mailboxlist && this.drag_active) { + var s_mbox = String(mbox).toLowerCase().replace(this.mbox_expression, ''); + var mbox_li = document.getElementById('rcmbx'+s_mbox); + + if (mbox_li) + this.set_classname(mbox_li, 'selected', false); + } + } + // move selected messages to the specified mailbox this.move_messages = function(mbox) { @@ -2199,7 +2225,6 @@ highlight.removeAttribute('id'); //highlight.removeAttribute('class'); this.set_classname(highlight, 'selected', false); - this.set_classname(highlight, 'unfocused', false); } if (next) @@ -2990,7 +3015,7 @@ // mark a mailbox as selected and set environment variable this.select_mailbox = function(mbox) { - if (this.gui_objects.mailboxlist) + if (this.gui_objects.mailboxlist ) { var item, reg, text_obj; var s_current = this.env.mailbox.toLowerCase().replace(this.mbox_expression, ''); @@ -3003,8 +3028,10 @@ if (current_li) { this.set_classname(current_li, 'selected', false); this.set_classname(current_li, 'unfocused', false); - } - if (mbox_li) + } + + if (mbox_li || this.env.mailbox == mbox) + this.set_classname(mbox_li, 'unfocused', false); this.set_classname(mbox_li, 'selected', true); } Index: program/steps/mail/func.inc =================================================================== --- program/steps/mail/func.inc (revision 274) +++ program/steps/mail/func.inc (working copy) @@ -216,6 +216,8 @@ $out .= sprintf('<li id="rcmbx%s" class="mailbox %s %s%s%s"><a href="%s&_mbox=%s"'. ' onclick="return %s.command(\'list\',\'%s\')"'. + ' onmouseover="return %s.focus_mailbox(\'%s\')"' . + ' onmouseout="return %s.unfocus_mailbox(\'%s\')"' . ' onmouseup="return %s.mbox_mouse_up(\'%s\')"%s>%s</a>', $folder_css, $class_name, @@ -227,7 +229,12 @@ $JS_OBJECT_NAME, addslashes($folder['id']), $JS_OBJECT_NAME, + addslashes($folder['id']), + $JS_OBJECT_NAME, + addslashes($folder['id']), + $JS_OBJECT_NAME, addslashes($folder['id']), + $title, rep_specialchars_output($foldername, 'html', 'all')); Index: skins/default/mail.css =================================================================== --- skins/default/mail.css (revision 274) +++ skins/default/mail.css (working copy) @@ -266,7 +266,7 @@ #mailboxlist li.selected { - background-color: #929292; + background-color: #CC3333; border-bottom: 1px solid #898989; } @@ -276,7 +276,18 @@ font-weight: bold; } +#mailboxlist li.unfocused +{ + background-color: #929292; + border-bottom: 1px solid #898989; +} +#mailboxlist li.unfocused a +{ + color: #FFF; + font-weight: bold; +} + /* styles for nested folders */ #mailboxlist ul { list-style: none;

3 4

Segfaults after the 'Cannot modify header...' error
by phil 01 Aug '06

01 Aug '06

As a followup, I'm now seeing some regular segfaulting of Apache after some of the 'Cannot modify header information - headers already sent in Unknown on line 0" error that I keep getting in /var/log/httpd-error.log: [Mon Jun 26 13:10:34 2006] [error] [client 70.246.222.74] PHP Warning: Cannot modify header information - headers already sent in Unknown on line 0 [Mon Jun 26 13:10:34 2006] [error] [client 70.246.222.74] PHP Warning: Cannot modify header information - headers already sent in Unknown on line 0 [Mon Jul 31 13:10:34 2006] [notice] child pid 75525 exit signal Segmentation fault (11) [Thu Jun 15 13:24:45 2006] [error] [client 199.249.176.251] PHP Warning: Cannot modify header information - headers already sent in Unknown on line 0 [Thu Jun 15 13:24:45 2006] [error] [client 199.249.176.251] PHP Warning: Cannot modify header information - headers already sent in Unknown on line 0 [Mon Jul 31 13:24:45 2006] [notice] child pid 75657 exit signal Segmentation fault (11) This is on Apache 2.0.58 with php5-5.1.4 - FreeBSD 6.0 P -- http://fak3r.com - you don't have to kick it -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

1 0

fixed bag in roundcube webmail
by Alexander A. Boykov 01 Aug '06

01 Aug '06

hello. maybe it's not bug, but in my system when i create first mailbox and login in webmail - there are no folders Sent and Trash. i read source code and make change: *** rcube_imap.inc.bak 2006-07-31 19:29:27.000000000 +0400 --- rcube_imap.inc 2006-07-31 19:28:21.000000000 +0400 *************** *** 364,370 **** --- 364,374 ---- if (!in_array_nocase('INBOX', $a_folders)) { $this->create_mailbox('INBOX', TRUE); + $this->create_mailbox('Sent', TRUE); + $this->create_mailbox('Trash', TRUE); array_unshift($a_folders, 'INBOX'); + array_unshift($a_folders, 'Sent'); + array_unshift($a_folders, 'Trash'); } $a_mailbox_cache = array(); now mailboxes creatres succesfully. thanks. -- С уважением, Бойков Александр Системный администратор HighLink a.boykov(a)sweb.ru

1 0

Re: HMGP to Acquire Additional 104 Wells - Susana Henley
by Odessa Grimm 01 Aug '06

01 Aug '06

coachwork pilferage bedevil drafty Hemi Energy (HMGP) to Acquire an Additional 104 Wells cancerous GRAHAM, Texas--(BUSINESS WIRE)--Mon, 31 Jul 2006 09:12:19 -0600--Hemi Energy (HMGP) announces that it is finalizing the acquisition of approximately 104 additional wells. These additional wells are located adjacent and offsetting to the 63 wells currently being upgraded and converted to EOR (Enhanced Oil Recovery). This acquisition will allow for ongoing expansion of Hemi's current Eastern Kansas EOR operations. This critical acquisition will give Hemi in excess of four contiguous square miles of EOR operations. This acquisition is expected to close within 7-14 working days. choice paleozoic prognosis http://biz.yahoo.com/bw/060727/20060727005065.html?.v=1 - Read the Entire Press Release Here

1 0

2 bugs ?
by Frank Habermann 31 Jul '06

31 Jul '06

Hello, i use the acutal(i belive its 284) svn version of roundcube and i have the following problems. if i write a mail not every mail is really send. the second problem is listing. roundcube make a background refresh of the list so that new mails in my account will be displayed. the problem here is that some mails will be displayed two or more times. if i make a hole refresh all is good. and the last thing. the number of new mails on the left side is not always right. sometimes it is not displayed and sometimes he shows new mails and i have no mails in my account. i use firefox 1.5.0.5 and on the server debian sarge with mysql 4.0.x and php4.3.x. I hope that will help. regards, Frank

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Dev