Hello list,
Could you help me out with the managesieve plugin? This way I could contribute with some testing on my home box. ;) I have a standard Opensuse 11.0 with dovecot 1.0. I have built a new 1.2.5 dovecot from source, with dovecot-sieve and dovecot-managesieve. Everything looks fine.
(The old 1.0 dovecot was installed, I use it's config and init scripts for the newer (1.2.5) one) dovecont.conf is soft-linked, the binary was changed in the init script, I think it should be enough...
# ll /usr/local/etc/dovecot.conf lrwxrwxrwx 1 root root 25 Sep 18 10:43 /usr/local/etc/dovecot.conf -> /etc/dovecot/dovecot.conf
# grep DOVECOT_BIN /etc/init.d/dovecot #DOVECOT_BIN=/usr/sbin/dovecot DOVECOT_BIN=/usr/local/sbin/dovecot
This way I could config the managesieve plugin in roundcube to get to work, at least I can click some sieve rules on the web interface. But the filtering isn't working! I think the problem could be that the system uses postfix as LDA. Am I right? Or what could be the reason? I think on SuSE we should wait until the dovecot repo gets refreshed to at least 1.1 and we need sieve/managesieve support for the prebuilt binaries. Until then, the average user won't be using this long-awaited plugin on SuSE. :(
My question is, could someone point me into the right direction, how could I debug my case and see what isn't working?
Regards, Viktor
Viktor Balogh wrote:
This way I could config the managesieve plugin in roundcube to get to work, at least I can click some sieve rules on the web interface. But the filtering isn't working! I think the problem could be that the system uses postfix as LDA. Am I right?
Yes. Messages must be delivered by dovecot. Then you just enable cmusieve plugin for lda protocol in dovecot.conf.
Dear Viktor,
If your managesieve plugin is working fine (and your rules are set-up with dovecot), you need to set-up your LDA to use that Sieve rules.
Dovecot uses good documentation about setting up Postfix with dovecot LDA: http://wiki.dovecot.org/LDA/Postfix
So, if you see managesieve plugin working in dovecot, just use the dovecot deliver as LDA, and filtering will start working...
regards, Jernej
Viktor Balogh wrote:
Hello list,
Could you help me out with the managesieve plugin? This way I could contribute with some testing on my home box. ;) I have a standard Opensuse 11.0 with dovecot 1.0. I have built a new 1.2.5 dovecot from source, with dovecot-sieve and dovecot-managesieve. Everything looks fine.
(The old 1.0 dovecot was installed, I use it's config and init scripts for the newer (1.2.5) one) dovecont.conf is soft-linked, the binary was changed in the init script, I think it should be enough...
# ll /usr/local/etc/dovecot.conf lrwxrwxrwx 1 root root 25 Sep 18 10:43 /usr/local/etc/dovecot.conf -> /etc/dovecot/dovecot.conf
# grep DOVECOT_BIN /etc/init.d/dovecot #DOVECOT_BIN=/usr/sbin/dovecot DOVECOT_BIN=/usr/local/sbin/dovecot
This way I could config the managesieve plugin in roundcube to get to work, at least I can click some sieve rules on the web interface. But the filtering isn't working! I think the problem could be that the system uses postfix as LDA. Am I right? Or what could be the reason? I think on SuSE we should wait until the dovecot repo gets refreshed to at least 1.1 and we need sieve/managesieve support for the prebuilt binaries. Until then, the average user won't be using this long-awaited plugin on SuSE. :(
My question is, could someone point me into the right direction, how could I debug my case and see what isn't working?
Regards, Viktor
List info: http://lists.roundcube.net/dev/
-
A.L.E.C -
Jernej Porenta -
Viktor Balogh