thomas i would just like to say thank you for all your hard work on this project! I looked at the status just now and was shocked at all the work you have been puting in and wanted to just let you know we apreciate all the time and effort you have been putting in.
-Chris
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete this material from any computer.
In accordance with industry regulations, all messages are retained and are subject to monitoring.
This message has been scanned for viruses and dangerous content and is believed to be clean.
Securities offered through Cantella & Co., Inc., Member NASD/SIPC. Home Office: 2 Oliver Street, 11th Floor, Boston, MA 02109 Telephone: (617)521-8630
Chris Richardson wrote:
thomas i would just like to say thank you for all your hard work on this project! I looked at the status just now and was shocked at all the work you have been puting in and wanted to just let you know we apreciate all the time and effort you have been putting in.
Thanks a lot! I was also shocked when realizing that the last release (0.1-beta2) was already 9 months ago. Far too long to wait for a new release. I'm looking forward to release more often and with all your help this might be possible.
~Thomas
I would like to thank you all for your work in this project too.
In september I started working on a part-time job at my university, as an admin of a server with about 300 users. Now I am upgrading it and I've decided to install Roundcube as the default webmail, rather than the currently running Endymionhttp://www.endymion.com/products/mailman/demo/mailman.cgior SquirrelMail http://www.squirrelmail.org/screenshots.php.
I think that some important features are missing in rc1 and should be available with rc2 (specially the mark mail(s) as read/unread buttons), but the job done by now is really great.
So... that's all! Thank you again, Thomas.
Roger
2007/5/19, Thomas Bruederli roundcube@gmail.com:
Chris Richardson wrote:
thomas i would just like to say thank you for all your hard work on this project! I looked at the status just now and was shocked at all the work you have been puting in and wanted to just let you know we apreciate all
the time and effort you have been putting in.
Thanks a lot! I was also shocked when realizing that the last release (0.1-beta2) was already 9 months ago. Far too long to wait for a new release. I'm looking forward to release more often and with all your help this might be possible.
~Thomas
By the way, is this:
// only list folders within this path $rcmail_config['imap_root'] = '';
working correctly? I put there mail, but the files and folders in the /home/user123/ folder are still shown. It seems to be OK in the 18th March nightlysvn build.
Roger
2007/5/19, Roger Pueyo Centelles rogerpueyo@rogerpueyo.com:
I would like to thank you all for your work in this project too.
In september I started working on a part-time job at my university, as an admin of a server with about 300 users. Now I am upgrading it and I've decided to install Roundcube as the default webmail, rather than the currently running Endymionhttp://www.endymion.com/products/mailman/demo/mailman.cgior SquirrelMail http://www.squirrelmail.org/screenshots.php.
I think that some important features are missing in rc1 and should be available with rc2 (specially the mark mail(s) as read/unread buttons), but the job done by now is really great.
So... that's all! Thank you again, Thomas.
Roger
2007/5/19, Thomas Bruederli roundcube@gmail.com:
Chris Richardson wrote:
thomas i would just like to say thank you for all your hard work on
this
project! I looked at the status just now and was shocked at all the
work
you have been puting in and wanted to just let you know we apreciate
all
the time and effort you have been putting in.
Thanks a lot! I was also shocked when realizing that the last release (0.1-beta2) was already 9 months ago. Far too long to wait for a new release. I'm looking forward to release more often and with all your help this might be possible.
~Thomas
I recently sent a patch to add mark as read/unread buttons.
You just have to apply the patch and put the pictures in the following directory : roundcubemail/skins/default/images/buttons
(notice that I don't provide all the picture needed, I mean nor
*_pas.png neither *_ sel.png)
On Sat, 19 May 2007 11:59:35 +0000, "Roger Pueyo Centelles" wrote:
I would like to thank you all for your work in this project too.
In september I started working on a part-time job at my university,
as an admin of a server with about 300 users. Now I am upgrading it
and I've decided to install Roundcube as the default webmail, rather
than the currently running Endymion [1] or SquirrelMail [2].
I think that some important features are missing in rc1 and should
be available with rc2 (specially the mark mail(s) as read/unread
buttons), but the job done by now is really great.
So... that's all! Thank you again, Thomas.
Roger
2007/5/19, Thomas Bruederli : Chris Richardson wrote:
thomas i would just like to say thank you for all your hard work
on this
project! I looked at the status just now and was shocked at all
the work
you have been puting in and wanted to just let you know we
apreciate all
the time and effort you have been putting in.
Thanks a lot! I was also shocked when realizing that the last release (0.1-beta2) was already 9 months ago. Far too long to wait for a new release. I'm looking forward to release more often and with all your help this might be possible. ~Thomas !DSPAM:464ee651201439010381557!
Links:
[1] http://www.endymion.com/products/mailman/demo/mailman.cgi [2] http://www.squirrelmail.org/screenshots.php [3] mailto:roundcube@gmail.com
I think this is a great feature and would love to see it implemented as i often get alot of automated messages that i mark as read in large batchs.
-Chris
mat wrote:
I recently sent a patch to add mark as read/unread buttons.
You just have to apply the patch and put the pictures in the following directory : roundcubemail/skins/default/images/buttons
(notice that I don't provide all the picture needed, I mean nor *_pas.png neither *_ sel.png)
On Sat, 19 May 2007 11:59:35 +0000, "Roger Pueyo Centelles" wrote:
I would like to thank you all for your work in this project too. In september I started working on a part-time job at my university, as an admin of a server with about 300 users. Now I am upgrading it and I've decided to install Roundcube as the default webmail, rather than the currently running Endymion <http://www.endymion.com/products/mailman/demo/mailman.cgi> or SquirrelMail <http://www.squirrelmail.org/screenshots.php>. I think that some important features are missing in rc1 and should be available with rc2 (specially the mark mail(s) as read/unread buttons), but the job done by now is really great. So... that's all! Thank you again, Thomas. Roger 2007/5/19, Thomas Bruederli <roundcube@gmail.com <mailto:roundcube@gmail.com>>: Chris Richardson wrote: > thomas i would just like to say thank you for all your hard work on this > project! I looked at the status just now and was shocked at all the work > you have been puting in and wanted to just let you know we apreciate all > the time and effort you have been putting in. Thanks a lot! I was also shocked when realizing that the last release (0.1-beta2) was already 9 months ago. Far too long to wait for a new release. I'm looking forward to release more often and with all your help this might be possible. ~Thomas !DSPAM:464ee651201439010381557!
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete this material from any computer.
In accordance with industry regulations, all messages are retained and are subject to monitoring.
This message has been scanned for viruses and dangerous content and is believed to be clean.
Securities offered through Cantella & Co., Inc., Member NASD/SIPC. Home Office: 2 Oliver Street, 11th Floor, Boston, MA 02109 Telephone: (617)521-8630
Reported in ticket #1484379. Fixed with revision 585.
~Thomas
Roger Pueyo Centelles wrote:
By the way, is this:
// only list folders within this path $rcmail_config['imap_root'] = '';
working correctly? I put there mail, but the files and folders in the /home/user123/ folder are still shown. It seems to be OK in the 18th March nightlysvn build.
Roger
-
Chris Richardson -
Chris Richardson -
mat -
Roger Pueyo Centelles -
Thomas Bruederli