Hello,
I've installed the latest release of Roundcube on my OpenBSD server.
However, i cannot log in.
SSL: -I've set the default_host to 'ssl://localhost:993' -When I try to log in, the browser just sits there until it times out (no data is returned) -In my mail log file, I see this: imaps SSL service init from <my-ip> Command stream end of file, while reading line user=??? host=<my-host>
Non-SSL: -When I do not use ssl, and set the default_host to 'localhost', the browser returns, but I get the following error message: IMAP Error: Authentication failed (LOGIN):<br>"a001 NO LOGIN failed" in on line 0 -In my authlog, I get this (see reason below): Login disabled user=seth auth=seth host=localhost [127.0.0.1] -While I do not want to use non-SSL on my server, I tried it just to see what would happen
Possible issues... -I have a self-signed cert for my IMAP SSL -I am not surprised that the non-SSL doesn't work, as I have disabled it, see "LOGINDISABLED" below.
More info... -When I telnet to my IMAP port, this is what is reported: * OK [CAPABILITY IMAP4REV1 LITERAL+ SASL-IR LOGIN-REFERRALS STARTTLS LOGINDISABLED] <my-host> IMAP4rev1 2004.352 at Fri, 7 Oct 2005 12:24:17 -0400 (EDT) -When I use "openssl s_client" to look at my SSL's IMAP port, this is what is reported: * OK [CAPABILITY IMAP4REV1 LITERAL+ SASL-IR LOGIN-REFERRALS AUTH=PLAIN AUTH=LOGIN] <my-host IMAP4rev1 2004.352 at Fri, 7 Oct 2005 12:35:07 -0400 (EDT)
Any help would be appreciated. Please CC me on any replies, as I am not on the dev mailing list. Thanks in advance, Seth
What do you have "auto_create_user" set to?
I had the same problem. It would seem from the description of that parameter that it should be set to FALSE if you only want your existing mail users to use the system.
I too was unable to login like you so I set it to TRUE.
Hope this helps.
Geoffrey
On 10/7/2005, "Seth Seeger" seth@seeger.ws wrote:
Hello,
I've installed the latest release of Roundcube on my OpenBSD server. However, i cannot log in.
SSL: -I've set the default_host to 'ssl://localhost:993' -When I try to log in, the browser just sits there until it times out (no data is returned) -In my mail log file, I see this: imaps SSL service init from <my-ip> Command stream end of file, while reading line user=??? host=<my-host>
Non-SSL: -When I do not use ssl, and set the default_host to 'localhost', the browser returns, but I get the following error message: IMAP Error: Authentication failed (LOGIN):<br>"a001 NO LOGIN failed" in on line 0 -In my authlog, I get this (see reason below): Login disabled user=seth auth=seth host=localhost [127.0.0.1] -While I do not want to use non-SSL on my server, I tried it just to see what would happen
Possible issues... -I have a self-signed cert for my IMAP SSL -I am not surprised that the non-SSL doesn't work, as I have disabled it, see "LOGINDISABLED" below.
More info... -When I telnet to my IMAP port, this is what is reported:
- OK [CAPABILITY IMAP4REV1 LITERAL+ SASL-IR LOGIN-REFERRALS STARTTLS
LOGINDISABLED] <my-host> IMAP4rev1 2004.352 at Fri, 7 Oct 2005 12:24:17 -0400 (EDT) -When I use "openssl s_client" to look at my SSL's IMAP port, this is what is reported:
- OK [CAPABILITY IMAP4REV1 LITERAL+ SASL-IR LOGIN-REFERRALS AUTH=PLAIN
AUTH=LOGIN] <my-host IMAP4rev1 2004.352 at Fri, 7 Oct 2005 12:35:07 -0400 (EDT)
Any help would be appreciated. Please CC me on any replies, as I am not on the dev mailing list. Thanks in advance, Seth
It is set to true. Once I get it working, I can set it to false so I don't have just anyone logging in. Unfortunately, this doesn't solve my problem.
Seth
On Oct 7, 2005, at 2:00 PM, Geoffrey McCaleb wrote:
What do you have "auto_create_user" set to?
I had the same problem. It would seem from the description of that parameter that it should be set to FALSE if you only want your existing mail users to use the system.
I too was unable to login like you so I set it to TRUE.
Hope this helps.
Geoffrey
On 10/7/2005, "Seth Seeger" seth@seeger.ws wrote:
Hello,
I've installed the latest release of Roundcube on my OpenBSD server. However, i cannot log in.
SSL: -I've set the default_host to 'ssl://localhost:993' -When I try to log in, the browser just sits there until it times out (no data is returned) -In my mail log file, I see this: imaps SSL service init from <my-ip> Command stream end of file, while reading line user=??? host=<my-host>
Non-SSL: -When I do not use ssl, and set the default_host to 'localhost', the browser returns, but I get the following error message: IMAP Error: Authentication failed (LOGIN):<br>"a001 NO LOGIN failed" in on line 0 -In my authlog, I get this (see reason below): Login disabled user=seth auth=seth host=localhost [127.0.0.1] -While I do not want to use non-SSL on my server, I tried it just to see what would happen
Possible issues... -I have a self-signed cert for my IMAP SSL -I am not surprised that the non-SSL doesn't work, as I have disabled it, see "LOGINDISABLED" below.
More info... -When I telnet to my IMAP port, this is what is reported:
- OK [CAPABILITY IMAP4REV1 LITERAL+ SASL-IR LOGIN-REFERRALS STARTTLS
LOGINDISABLED] <my-host> IMAP4rev1 2004.352 at Fri, 7 Oct 2005 12:24:17 -0400 (EDT) -When I use "openssl s_client" to look at my SSL's IMAP port, this is what is reported:
- OK [CAPABILITY IMAP4REV1 LITERAL+ SASL-IR LOGIN-REFERRALS
AUTH=PLAIN AUTH=LOGIN] <my-host IMAP4rev1 2004.352 at Fri, 7 Oct 2005 12:35:07 -0400 (EDT)
Any help would be appreciated. Please CC me on any replies, as I am not on the dev mailing list. Thanks in advance, Seth
Hi Seth,
Sounds like a socket connection problem. Do you have Open SSL installed with your PHP build? If this is not installed, a secure connection can't be establish and RoundCube will try to connect to port 143. You should enable your IMAP daemon to accept non-SSL connection from 127.0.0.1. Unfortunately I haven't test RoundCube with self-signed certificates but I don't think this should be a problem.
Regards, Thomas
2005/10/7, Seth Seeger seth@seeger.ws:
Hello,
I've installed the latest release of Roundcube on my OpenBSD server. However, i cannot log in.
SSL: -I've set the default_host to 'ssl://localhost:993' -When I try to log in, the browser just sits there until it times out (no data is returned) -In my mail log file, I see this: imaps SSL service init from <my-ip> Command stream end of file, while reading line user=??? host=<my-host>
Non-SSL: -When I do not use ssl, and set the default_host to 'localhost', the browser returns, but I get the following error message: IMAP Error: Authentication failed (LOGIN):<br>"a001 NO LOGIN failed" in on line 0 -In my authlog, I get this (see reason below): Login disabled user=seth auth=seth host=localhost [127.0.0.1] -While I do not want to use non-SSL on my server, I tried it just to see what would happen
Possible issues... -I have a self-signed cert for my IMAP SSL -I am not surprised that the non-SSL doesn't work, as I have disabled it, see "LOGINDISABLED" below.
More info... -When I telnet to my IMAP port, this is what is reported: * OK [CAPABILITY IMAP4REV1 LITERAL+ SASL-IR LOGIN-REFERRALS STARTTLS LOGINDISABLED] <my-host> IMAP4rev1 2004.352 at Fri, 7 Oct 2005 12:24:17 -0400 (EDT) -When I use "openssl s_client" to look at my SSL's IMAP port, this is what is reported: * OK [CAPABILITY IMAP4REV1 LITERAL+ SASL-IR LOGIN-REFERRALS AUTH=PLAIN AUTH=LOGIN] <my-host IMAP4rev1 2004.352 at Fri, 7 Oct 2005 12:35:07 -0400 (EDT)
Any help would be appreciated. Please CC me on any replies, as I am not on the dev mailing list. Thanks in advance, Seth
-
Geoffrey McCaleb -
Seth Seeger -
Thomas Bruederli