Users February 2007

users@lists.roundcube.net

39 participants
28 discussions

adding text to login page
by Sam DeForest 04 Feb '07

04 Feb '07

Has anyone tried to add text to the main login page?....I want to add a few lines below the login box. Would someone know which file this can be done in? I really don't care what it looks like, as long as it can be read. Thanks, Sam

3 2

03 Feb '07

Hi, i got a little problem with the config of auto_create_user = FALSE. i used roundcube 2 month with auto_create_user = TRUE and now i've turned it to FALSE and get this Error message: Error Message: Quote * CAPABILITY IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ MAILBOX-REFERRALS NAMESPACE UIDPLUS ID NO_ATOMIC_RENAME UNSELECT CHILDREN MULTIAPPEND SORT THREAD=ORDEREDSUBJECT THREAD=REFERENCES IDLE STARTTLS ANNOTATEMORE cp01 OK Completed Tried PLAIN: Resource id #32 in the database all the needet data is avalible, because of the auto_create_user = TRUE maybe somebody knows the problem, no errors are reported to the log file. only this message is showd if i set loglevel to 8 thx

3 2

Re: Cannot switch tasks
by Sam DeForest 02 Feb '07

02 Feb '07

> -----Original Message----- > From: Joshua J. Kugler [mailto:joshua@eeinternet.com] > Sent: Friday, February 02, 2007 1:53 PM > To: sam.deforest(a)walpolewood.net > Subject: Re: Cannot switch tasks > > On Friday 02 February 2007 09:35, Sam DeForest wrote: > > > -----Original Message----- > > > From: Joshua J. Kugler [mailto:joshua@eeinternet.com] > > > Sent: Friday, February 02, 2007 1:26 PM > > > To: users(a)lists.roundcube.net > > > Subject: Cannot switch tasks > > > > > > [I posted this to the forum, but haven't see a reply. Hoping the list > > > might > > > be a bit more active.] > > > > > > Server: Lighttpd > > > Environment: CGI and FastCGI (tested both) > > > Version: 0.1b2 (from Ubuntu packages) > > > Errors in logs: none > > > Browser: Firefox 1.5.0.9 > > > > > > I can log in fine, and all looks good. However, if I click on address > > > book or > > > personal settings, it goes right back to the mailbox view. The access > > > log shows these two requests back to back: > > > > > > xxx.xxx.xxx.xxx hostname - [01/Feb/2007:17:04:54 -0900] "GET > > > /?_task=settings > > > HTTP/1.1" 200 2650 "http://hostname/?_task=mail" "Mozilla/5.0 (X11; U; > > > Linux > > > i686; en-US; rv:1.8.0.9) Gecko/20070126 Ubuntu/dapper-security > > > Firefox/1.5.0.9" > > > xxx.xxx.xxx.xxx hostname > > > [01/Feb/2007:17:04:55 -0900] "GET > > > /?_task=mail&_action=getunread&&_remote=1 > > > HTTP/1.1" 200 153 "-" "Mozilla/5.0 (X11; U; Linux i686; en-US; > > > rv:1.8.0.9) Gecko/20070126 Ubuntu/dapper-security Firefox/1.5.0. > > > > > > Oddly, the second one has no referrer. Where should I start looking, > > > since > > > there are no errors in the logs? > > > > > > Thanks! > > > > > > j > > > -- > > > Joshua Kugler > > > Lead System Admin -- Senior Programmer > > > http://www.eeinternet.com > > > PGP Key: http://pgp.mit.edu/ ID 0xDB26D7CE > > > PO Box 80086 -- Fairbanks, AK 99708 -- Ph: 907-456-5581 Fax: 907-456- > 3111 > > > > Joshua, > > > > You have a folder /logs in the root of the roundcube directory you > created > > on your website folder...what's it say inside? It may have more details. > > The above looks like the website log itself. > > Sam - > > Thanks for your reply. When I said "errors in logs," that was the log > file I > was referring to, sorry for not being clear. Roundcube is not reporting > any > errors. I've confirmed this behavior with: > > Firefox 1.5 (Linux) > Firefox 1.5 (Windows 2000) > IE 6 (Windows 2000) > IE 6 (Wine) > IE 5.5 (Wine) > > Any other ideas? > > j > > -- > Joshua Kugler > Lead System Admin -- Senior Programmer > http://www.eeinternet.com > PGP Key: http://pgp.mit.edu/ ID 0xDB26D7CE > PO Box 80086 -- Fairbanks, AK 99708 -- Ph: 907-456-5581 Fax: 907-456-3111 Joshua, As far as the errors go...is your PHP config set for errors [E_ALL]? My next place to look would be the database (connection to) or the table itself may be corrupt. The address book data resides in there. Im new to roundcube so take my recommendations with a grain of salt. Regards, Sam

2 4

Re: RoundCube broken with php 5.2.0
by Spil Oss 02 Feb '07

02 Feb '07

Hi All, Finally I found out what broke my php5.2/roundcube, it was my make environment in FreeBSD. My kernel and userland were NO_INET6, but I didn't have WITHOUT_IPV6 set for my ports. After I set WITHOUT_IPV6 it works fine! Kind regards, Spil Hope this helps some other people! On 05/12/06, Spil Oss <spil.oss(a)googlemail.com> wrote: > Working order of extensions.ini is welcome! > > Kind regards, > > Spil > > On 02/12/06, Phil Cryer <phil(a)cryer.us> wrote: > > Ok, I'm on 5.2 with Suhosin and eAccel working fine: > > > > [20:15:53] [root@chavez /root]# php --version > > PHP 5.2.0 with Suhosin-Patch 0.9.6.2 (cli) (built: Nov 17 2006 10:58:01) > > Copyright (c) 1997-2006 The PHP Group > > Zend Engine v2.2.0, Copyright (c) 1998-2006 Zend Technologies > > with eAccelerator v0.9.5, Copyright (c) 2004-2006 eAccelerator, by > > eAccelerator > > > > Let me know if you want to see my php.ini or anything else. > > > > P > > > > > > On 12/1/06, Spil Oss <spil.oss(a)googlemail.com> wrote: > > > Hi Phil, > > > > > > Yes, I've tried to run without suhosin and eaccelator, but no luck. > > > > > > There are reports on this list indicating that the order of loading > > > extensions is important, I'll be trying that next! > > > > > > Spil. > > > > > > PS *light* I had a non-crashing debug-build of php 5.2, perhaps the > > > extensions.ini in there is a winner! > > > > > > On 20/11/06, Phil Cryer <phil(a)cryer.us> wrote: > > > > In that ticket, notice: > > > > > > > > " PHP 5.2.0 with Suhosin-Patch 0.9.6.1 " > > > > > > > > I just rebuilt PHP due to a server rebuild (so I haven't tested RC yet) > > but > > > > I noticed it included that hardening patch (suhosin) this time...have > > you > > > > tried building w/o that? If running freebsd just do a 'make config' in > > the > > > > php5.2 port dir to turn it 'off'. I'll try this, but won't be for a few > > > > days. Yeah, I flubbed when trying to move a set of RAID1 drives from > > one > > > > server to another... > > > > > > > > P > > > > > > > > > > > > On 11/20/06, Spil Oss <spil.oss(a)googlemail.com> wrote: > > > > > Seems I'm not the only one with php 5.2.0 / eaccelerator problems... > > > > > > > > > > https://www.eaccelerator.net/ticket/207#preview > > > > > > > > > > Unfortunately no-one seems to have picked it up yet.... > > > > > > > > > > Spil. > > > > > > > > > > On 09/11/06, Spil Oss <spil.oss(a)googlemail.com> wrote: > > > > > > Hi All, > > > > > > > > > > > > Now running php compiled with --enable-debug so I could create a > > dump > > > > > > backtrace, and guess what, RoundCube is no longer segfaulting on > > > > > > RoundCube. > > > > > > > > > > > > Anyone able to explain this behaviour? > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > Spil > > > > > > > > > > > > On 09/11/06, Spil Oss < spil.oss(a)googlemail.com> wrote: > > > > > > > No such luck.... > > > > > > > > > > > > > > Ran portupgrade -rf php5 and still rouncube fails. If anyone has > > any > > > > > > > suggestions on how to make roundcube more verbose, I'm open for > > > > > > > suggestions! > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > Spil. > > > > > > > > > > > > > > On 08/11/06, Spil Oss < spil.oss(a)googlemail.com> wrote: > > > > > > > > Hi All, > > > > > > > > > > > > > > > > Just pulled the 20061108 snapshot and now succesfully able to > > build > > > > > > > > pear again (open_basedir restriction gave me headaches). Will > > try > > > > > > > > again, also rebuilding PEAR. > > > > > > > > > > > > > > > > As always, determined to make pigs fly! > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > > Spil. > > > > > > > > > > > > > > > > On 08/11/06, Moritz < mo(a)agrav.org> wrote: > > > > > > > > > Spil Oss wrote: > > > > > > > > > > Reverting back to 5.1.6 solved my problem. > > > > > > > > > > > > > > > > > > > Mind you, there are reports of people succesfully running > > > > roundcube on > > > > > > > > > > php 5.2.0, so you might try it on a test-box and then deploy > > if > > > > > > > > > > succesful. > > > > > > > > > > There must be something special with my setup that breaks > > > > roundcube.... > > > > > > > > > > > > > > > > > > I can confirm this. I have roundcube running on PHP 5.2.0 and > > it > > > > seems > > > > > > > > > to work fine. > > > > > > > > > > > > > > > > > > My system details: > > > > > > > > > > > > > > > > > > - roundcube v0.1-beta2 > > > > > > > > > - PHP 5.2.0-0.dotdeb.1 with Suhosin-Patch 0.9.6 > > > > > > > > > - Debian 3.1 > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > > > > > > Spil. > > > > > > > > > > > > > > > > > > Regards, > > > > > > > > > -- > > > > > > > > > Moritz > > > > > > > > > > > > > > > > > > mo(a)agrav.org | mo.agrav.org | luna.agrav.org/~mo > > > > > > > > > > > > > > > > > > Get my GPG key fingerprint here: > > > > > > > > > https://luna.agrav.org/~mo/gpg/ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > "Without music, life would be a mistake" - Friedrich Nietzsche > > > > > > > > > > > > > > -- > > > > "Without music, life would be a mistake" - Friedrich Nietzsche >

1 0

Cannot switch tasks
by Joshua J. Kugler 02 Feb '07

02 Feb '07

[I posted this to the forum, but haven't see a reply. Hoping the list might be a bit more active.] Server: Lighttpd Environment: CGI and FastCGI (tested both) Version: 0.1b2 (from Ubuntu packages) Errors in logs: none Browser: Firefox 1.5.0.9 I can log in fine, and all looks good. However, if I click on address book or personal settings, it goes right back to the mailbox view. The access log shows these two requests back to back: xxx.xxx.xxx.xxx hostname - [01/Feb/2007:17:04:54 -0900] "GET /?_task=settings HTTP/1.1" 200 2650 "http://hostname/?_task=mail" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.0.9) Gecko/20070126 Ubuntu/dapper-security Firefox/1.5.0.9" xxx.xxx.xxx.xxx hostname [01/Feb/2007:17:04:55 -0900] "GET /?_task=mail&_action=getunread&&_remote=1 HTTP/1.1" 200 153 "-" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.0.9) Gecko/20070126 Ubuntu/dapper-security Firefox/1.5.0. Oddly, the second one has no referrer. Where should I start looking, since there are no errors in the logs? Thanks! j -- Joshua Kugler Lead System Admin -- Senior Programmer http://www.eeinternet.com PGP Key: http://pgp.mit.edu/ ID 0xDB26D7CE PO Box 80086 -- Fairbanks, AK 99708 -- Ph: 907-456-5581 Fax: 907-456-3111

2 1

Re: auth with cram-md5 when imap login
by 今井　信 02 Feb '07

02 Feb '07

Yes, it is. but I don't want to disable it. I mean, you can choose auth type for smtp auth so I wanted to choose what auth type I use for imap auth. I guess there is not such a configuration now, is it? Shin On Thu, 1 Feb 2007 20:56:20 -0800 Thomas Gibbons <tgibbons(a)eymo.us> wrote: > Is your mail server configured to allow cram-md5? If so disable it. > > On Fri, 02 Feb 2007 13:14:21 +0900, <p-simai(a)ssl.fujitsu.com> wrote: > > Hi, > > > > Roundcube is such a nice web mail. It is the best of what I know about > > webmail. > > > > but I have one question. > > > > login takes really long so tailed maillog and I found out the reason. > > Roundcube tries to log in with cram-md5 and then with login > > How can I configure auth method as login? > > > > Shin Imai >

3 3

MAIL sending problem in rouncube_0.1-beta2.2
by sergeyyy2004 02 Feb '07

02 Feb '07

Dear developers! When I try to send mail via roundcube I have a loop and nothink sent :-( It don`t try to connect via smtp and don`t run any comans for mail sending. PHP mail setup is coirrect and main.inc.php already setup for mail sending. How to resolve ? With regards, Sergey.

2 1

auth with cram-md5 when imap login
by 今井　信 02 Feb '07

02 Feb '07

Hi, Roundcube is such a nice web mail. It is the best of what I know about webmail. but I have one question. login takes really long so tailed maillog and I found out the reason. Roundcube tries to log in with cram-md5 and then with login How can I configure auth method as login? Shin Imai

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users February 2007