Users October 2014

users@lists.roundcube.net

29 participants
34 discussions

Time for new HTML Editor
by Nick Edwards 11 Oct '14

11 Oct '14

Evening, This has been mentioned on the list before, but I think it's time to make a stand and call for a new more intelligent HTML editor for in time the next release. The constant stream of complaints for when replying and trying to quote inline is becoming most annoying for us and some others I've talked to on IRC, the inability to enter comments inline without converting to TEXT, or editing the HTML, without making it appear the original sender, said what you are saying, is a pure joke. Try telling the average 80yo person how to edit the HTML insert this that save, click blockquote blah blah blah then type in your reply, this might be fine for those who know how and want to waste the time doing so,and reply to one or two message, but thats half a minute per message off someones life that doesnt need to be, amongst the heated anger they have for it being this way. And for many reasons many users need HTML so can not convert to text in replies. We never had to do this in squirelmail, we dont have to do it in gmail, hotmail, yahoo, etc etc etc So I think its high time for a new editor, one that works! or do we need to go back to squirellmail? At ;least we could hit enter and it would break up the quote lines the way they should.

6 13

courier-imap to dovecot
by Luciano Gabriel Andino 11 Oct '14

11 Oct '14

hello, I am using RCU and courier-imap server with 30000 emails folders and not possible to use (more than a minute to see email list). Change server to dovecot will help in speed terms? Do I need to change something in user boxes? -- Saludos!! Luciano Andino GNU/Linux user #185103 Santa Fe - Argentina -----------------------------------------------

2 1

Our Wish List for Encryption Browser Extensions
by Thomas Bruederli 11 Oct '14

11 Oct '14

Dear Roundcube devs and list lurkers PGP encryption for Roundcube is a repeatedly popping up topic. Of course we're also very much interested in providing a solid solution for end-to-end encryption as a standard part of Roundcube. I therefore tried to summarize the current situation in our wiki [1] and compiled a few wishes to current and future encryption browser plugins - from a webmail programmer's point of view of course: http://roundcubeinbox.wordpress.com/2014/10/10/our-wish-list-for-encryption… I think the approach with a locally installed browser extension to do the encryption part is the most sustainable at the moment. While Mailvelope [2] already does a pretty good job, please also give your attention to pEp [3] which adds some more simplicity and automation on top of standard encryption methods like PGP and S/MIME. After a recent meeting with the pEp developers, I'm really looking forward to see this become available, eventually also as a browser extension. So please support their crowd-funding campaign [4] and help them to make encryption easy for everyone. Kind regards, Thomas [1] http://trac.roundcube.net/wiki/Dev_Encryption [2] https://www.mailvelope.com/ [3] http://pep-project.org/ [4] http://go.pep-project.org/

1 0

debian jessie amd-64, roundcube 1.0.3, nginx, postfix, dovecot, mysql
by shmick＠riseup.net 09 Oct '14

09 Oct '14

im having a lot of difficulty getting RC to work in debian jessie and since there isn't a package in the repos ive come here for some much needed help in summary, what is the correct procedure to get all above talking to each other ? are there any other dovecot/postfix packages that are pre requisites ? what needs to be added to: /etc/dovecot/dovecot-sql.conf.ext ? /etc/dovecot/conf.d/auth-sql.conf.ext ? /etc/dovecot/conf.d/10-auth.conf ? i have next to no experience with PHP but ive checked the options against /etc/php5/fpm/php.ini these are missing: - zend.ze1_compatibility_mode disabled - NA - suhosin.session.encrypt disabled - NA - magic_quotes_runtime disabled - NA - magic_quotes_sybase disabled - NA php has the required compiled in modules regarding nginx, ive not installed it from repos and it has many components disabled but it does support fast cgi, php-fpm, etc, and i can submit php web forms from the RC installer tests everything is ok except getting dovecot auth working after finishing the installer and going to login i can never complete login browser: "connection to storage server failed" mail.log dovecot: imap-login: Disconnected (no auth attempts in 0 secs): no errors logged for nginx or roundcube

4 12

R: [Roundcube] ACL plugin
by Gianluca Calloni 08 Oct '14

08 Oct '14

HI.. Nobody can help me?? Luca Da: users-bounces(a)lists.roundcube.net [mailto:users-bounces@lists.roundcube.net] Per conto di Gianluca Calloni Inviato: martedì 7 ottobre 2014 17:35 A: users(a)lists.roundcube.net Oggetto: [RCU] [Roundcube] ACL plugin Hi to all I'm trying to use roundcube. I would like to understand how the ACL plugin works cause i'm interested in sharing mailbox. We have dovecot + postfix Roundcube is installed and working fine. I add in /var/lib/roundcube/config/main.inc.php the following $rcmail_config['plugins'] = array('acl'); But in webmail i can not see the relative ACL areas where the user can set the share settings. Could someone help me?? Thank's in advance

1 0

Redsleeve install, some modules missing
by Robert Moskowitz 07 Oct '14

07 Oct '14

Redsleeve is the arm port of Centos 6. So I am installing from the tar from roundcube.net and the installer script reports that: Checking PHP extensions The following modules/extensions are /required/ to run Roundcube: DOM: NOT OK(Could be loaded. Please add in php.ini; See http://www.php.net/manual/en/book.dom.php) The next couple of extensions are /optional/ and recommended to get the best performance: FileInfo: OK Mcrypt: NOT AVAILABLE(See http://www.php.net/manual/en/book.mcrypt.php) Intl: NOT AVAILABLE(See http://www.php.net/manual/en/book.intl.php) I don't see in the manual what to add to php.ini. Please advise. I have tried to find mcrypt (yum install mcrypt libmcrypt), but these are not the mcrypt it seems to want. And I don't know were to find the intl.php. thank you

3 7

Re: [RCU] Redsleeve install, some modules missing
by Robert Moskowitz 07 Oct '14

07 Oct '14

On 10/07/2014 05:25 PM, Reindl Harald wrote: > > > Am 07.10.2014 um 23:10 schrieb Robert Moskowitz: >> On 10/07/2014 04:02 PM, Matthias Sitte wrote: >>> install the 'php-intl' and 'php-mcrypt' packages. should add ini files >>> to /etc/php5/mods-available automatically. extensions are loaded by >>> 'extension=<name>.so' statements [1]. >> >> Installed php-intl, but no php-mcrypt. >> >> Now have to add php-intl to php.ini > > > > Originally I did not even have DOM, and was told to install > > php-xml. Now I have to work out the php.ini for it > > you have to do *what*? > > look at /etc/php.d/ or "rpm -q --filesbypkg php-xml" > as for any other package - the php modules all ship > their INI stuff Oops. I THOUGHT I restarted httpd, but obviously I did not, as restart reloaded the .ini and now I only need mcrypt. > > man you still have to learn a lot after that many years > Yes. I do. And more that I forget; I would like to blame my dyselxia, but other factors are at work here. I have extensive notes, and I come back to them 6 months later and spend a lot of time puzzling them out. Actually they DO tend to work.

1 0

Re: [RCU] Redsleeve install, some modules missing
by Robert Moskowitz 07 Oct '14

07 Oct '14

On 10/07/2014 03:51 PM, Reindl Harald wrote: > > Am 07.10.2014 um 21:43 schrieb Robert Moskowitz: >> Redsleeve is the arm port of Centos 6. So I am installing from the tar >> from roundcube.net and the installer script reports that: >> >> Checking PHP extensions >> >> The following modules/extensions are /required/ to run Roundcube: >> >> DOM: NOT OK(Could be loaded. Please add in php.ini; See >> http://www.php.net/manual/en/book.dom.php) >> >> The next couple of extensions are /optional/ and recommended to get the >> best performance: FileInfo: OK >> >> Mcrypt: NOT AVAILABLE(See http://www.php.net/manual/en/book.mcrypt.php) >> Intl: NOT AVAILABLE(See http://www.php.net/manual/en/book.intl.php) >> >> I don't see in the manual what to add to php.ini. Please advise. >> >> I have tried to find mcrypt (yum install mcrypt libmcrypt), but these >> are not the mcrypt it seems to want. > > it needs php-extensions and not just system libraries > with some luck there is a EPEL repo for ARM > >> And I don't know were to find the intl.php > > as above > No package php-extensions available. Going to have to work with Gordon about all the things I am not finding in his repos.

1 0

Trying to download Roundcube
by Robert Moskowitz 07 Oct '14

07 Oct '14

Over a year ago I did a test Roundcube install on Centos6. I am now building a Redsleeve6 (Centos on ARM) server. Given that the Centos repo is backdated on Roundcube, and the arm repo does not even have it, I have to go to the source and work from there. So I go to: http://roundcube.net/download/ and click on download complete (using firefox on Fedora20). I get the waiting on server for a while, and then nothing. No download started. Nothing. What is up? Or can someone give me a wget line that I can run directly from the arm (Cubietruck) server to get it where I need it anyway? thanks

1 1

[Roundcube] ACL plugin
by Gianluca Calloni 07 Oct '14

07 Oct '14

Hi to all. I'm trying to use roundcube. I would like to understand how the ACL plugin works cause i'm interested in sharing mailbox. We have dovecot + postfix Roundcube is installed and working fine. I add in /var/lib/roundcube/config/main.inc.php the following $rcmail_config['plugins'] = array('acl'); But in webmail i can not see the relative ACL areas where the user can set the share settings. Could someone help me?? Thank's in advance

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users October 2014