Hi there,
Does RC require the allow_url_fopen setting to be enabled in the
php.ini, or could I disable this and set it to = Off ?
allow_url_fopen = On
allow_url_fopen = Off
Best regards, S
--
List info: http://lists.roundcube.net/users/
BT/9b404e9e
Hello folks
After building and maintaining our own translation tool for some time
we now moved to the translation service at launchpad.net. This makes
it a lot easier for many people to contribute side by side and the
launchpad system even makes suggestions from translations of other
open source projects.
So from now on, we'd like you to go directly to
https://translations.launchpad.net/roundcubemail/trunk for any
translation work. If you visit that page now you can see the
(partially very poor) completeness status of our 75 languages. I'd
like to encourage everybody once again to participate and to help us
complete all the translations we currently have on the list.
Many thanks for you help!
Regards,
Thomas
--
List info: http://lists.roundcube.net/users/
BT/9b404e9e
Hi all,
I'm having some trouble with the address book in RoundCube 0.6. I have
been looking for the answer -of which I'm sure there already is- on
different resources. The problem is as follows. Contacts which are not
in a contactgroup are not displayed in the address book. At first I
thought this was by design, but adding addresses for automatic display
of inline images also stores contacts without a group. This resulted in
a lot of double addresses in the contacts table of the database.
Updating these contacts to be in a contactgroup revealed the addresses
and the images are then shown without a warning. What should I do to fix
this, or rather: where can I find the answer.
Best regards,
Marcel
--
List info: http://lists.roundcube.net/users/
BT/9b404e9e
Hi List,
i try to install the cas plugin (rc-cas-plugin) from the code.google.com
site.
After copying and modifying the two files cas_authentication.php and
config.inc.php in the /plugins/cas directory, I activated the plugin in the
file ../config/main.inc.php.
But I cannot see any buttons, link or logging of this cas-plugin when I open
the Roundcube Webmail-Page.
Now I want to know, if it is enough to take the two files mentioned above to
run this plugin with phpcas ?
Or is there something urgent missing in my explanation to activate the
plugin properly ?
I am running rc 0.6-stable with the password and vacation plugin. Also
phpcas 1.0.1 and PHP 5.3.3-7 is installed on this machine.
Has anybody some hints?
Regards
Andreas
--
List info: http://lists.roundcube.net/users/
BT/9b404e9e
Hi list,
I have RC running fine on FreeBSD 8.2. Users need to change their own
password, so I enabled de password plugin whith the 'pam' driver.
I configured PAM for the 'php' service; however, since Apache runs as
'www' user, the password change cannot be performed.
I tried suPHP and it didn't work either.
What's your suggestion for this scenario?
Thanks in advance.
Regards
Alberto Mijares
--
List info: http://lists.roundcube.net/users/
BT/9b404e9e
Hello everybody,
I have a problem with my address book .
After my migration 0.5.1 to 0.6 i have a problem to see address book see
the attachment (address_book_problem.png.
I can send / read / move e-mail with any problem. I use a postgresql
database (8.4)
All is ok when i was execute the ./update.sh
The verification is ok see the attachment : check_conf.pnp
Thank you for your help
Best Regards
Philippe
--
--- 8< --- detachments --- 8< ---
The following attachments have been detached and are available for viewing.
http://detached.gigo.com/rc/ht/5UhSyBdF/address_book_problem.pnghttp://detached.gigo.com/rc/ht/5UhSyBdF/check_conf.png
Only click these links if you trust the sender, as well as this message.
--- 8< --- detachments --- 8< ---
--
List info: http://lists.roundcube.net/users/
BT/9b404e9e
Hi List,
was anybody succesful with installing roundcube ver. 0.6 with the actual
pam_cas 2.0.11 and phpcas 1.2.2 for the cas_plugin ?
Or what version combinations have been successful in your environment?
I am trying to install the latest pam_cas for a dovecot-imap-backend and the
phpcas for the rc-cas-plugin, with no success.
Ive read on a forum that the actual phpcas 1.2.2 is not working with
roundcube 0.6.
Any experience informations would be great.
Greets
Andreas
--
List info: http://lists.roundcube.net/users/
BT/9b404e9e
HI all,
I've updated my roundcube webmail, from 0.3 to 0.6.
in roundcube0.3 there was a config routine imap_routine where I've mentioned the mail_home directory, in mycase '/home/login/mail.mail' :
$rcmail_config['imap_root'] = 'mail';
in roundecube0.6 that routine was changed by $rcmail_config['imap_ns_personal']
but it doesn't work, the new mail_home is under the directory '/home/login/mail/'
PLZ, how can I force roundecube to write in the folder /home/login/mail/mail
--
List info: http://lists.roundcube.net/users/
BT/9b404e9e
Hi list,
i try to setup the vacation plugin 1.9.9 with the setuid driver.
I have chosen this method because I've successfully installed a
vacation-plugin with this squirrelmail_vacation_proxy for squirrelmail with
pam_ldap.
There everything worked fine.
Now I configured this plugin for roundcube and got some problems with the
ldap users.
Local system users can use this plugin without problems, but my ldap users
cannot.
The following error appears only with ldap users:
PHP Error: Vacation plugin: /usr/bin/squirrelmail_vacation_proxy is not
configured for user "www-data".<br/> Check config.mk in
plugins/vacation/extra/vacation_binary. in
/home/roundcubemail-0.6/plugins/vacation/lib/setuid.class.php on line 0 (GET
/?_task=settings&_action=plugin.vacation)
I checked the file config.mk and set the user to www-data. Then I started
make and after make install. But the same error appears when I try to go to
the vacation plugin after login with a ldap user.
With the system user everything is fine.
Has anybody some hints?
Or should I change to the other vacation plugin from Boris Huisgen
"rc-vacation-0.4-13" for a openldap environment?
Regards
Andreas
--
List info: http://lists.roundcube.net/users/
BT/9b404e9e
Hi
I've just upgraded from roundcube 5.4 to 6.0.
The upgrading process went without problems through bin/installto.sh
script.
After upgrade everything seems to work fine with one exception - I
can't add image to contact in the address book.
There is just no image after uploading an image file.
During file uploading process I can see errors in apache log file:
[Tue Nov 22 13:42:19 2011] [error] [client X.X.X.X] PHP Fatal error:
Call to undefined function rc_image_content_type() in
XXXXXXXXXXXXXXXXXXX/program/steps/addressbook/show.inc on line 56,
referer: http://XXXXXXXXXXXXXXX/?_orig_source=0
There are also bunch of zero size files in roundcube temp directory:
-rw------- 1 www-data www-data 0 11-22 13:38 rcmImgConvert8TGMLc
-rw------- 1 www-data www-data 0 11-22 13:37 rcmImgConvertdHeKFE
-rw------- 1 www-data www-data 0 11-22 13:42 rcmImgConvertdxvnxq
-rw------- 1 www-data www-data 0 11-22 13:04 rcmImgConverthV7p2P
-rw------- 1 www-data www-data 0 11-22 13:39 rcmImgConvertjTOTHi
I would be grateful for any help.
Regards
--
Pawel Warowny
--
List info: http://lists.roundcube.net/users/
BT/9b404e9e