Users

users@lists.roundcube.net

6 participants
2896 discussions

Re: RoundCube broken with php 5.2.0
by Spil Oss 02 Feb '07

02 Feb '07

Hi All, Finally I found out what broke my php5.2/roundcube, it was my make environment in FreeBSD. My kernel and userland were NO_INET6, but I didn't have WITHOUT_IPV6 set for my ports. After I set WITHOUT_IPV6 it works fine! Kind regards, Spil Hope this helps some other people! On 05/12/06, Spil Oss <spil.oss(a)googlemail.com> wrote: > Working order of extensions.ini is welcome! > > Kind regards, > > Spil > > On 02/12/06, Phil Cryer <phil(a)cryer.us> wrote: > > Ok, I'm on 5.2 with Suhosin and eAccel working fine: > > > > [20:15:53] [root@chavez /root]# php --version > > PHP 5.2.0 with Suhosin-Patch 0.9.6.2 (cli) (built: Nov 17 2006 10:58:01) > > Copyright (c) 1997-2006 The PHP Group > > Zend Engine v2.2.0, Copyright (c) 1998-2006 Zend Technologies > > with eAccelerator v0.9.5, Copyright (c) 2004-2006 eAccelerator, by > > eAccelerator > > > > Let me know if you want to see my php.ini or anything else. > > > > P > > > > > > On 12/1/06, Spil Oss <spil.oss(a)googlemail.com> wrote: > > > Hi Phil, > > > > > > Yes, I've tried to run without suhosin and eaccelator, but no luck. > > > > > > There are reports on this list indicating that the order of loading > > > extensions is important, I'll be trying that next! > > > > > > Spil. > > > > > > PS *light* I had a non-crashing debug-build of php 5.2, perhaps the > > > extensions.ini in there is a winner! > > > > > > On 20/11/06, Phil Cryer <phil(a)cryer.us> wrote: > > > > In that ticket, notice: > > > > > > > > " PHP 5.2.0 with Suhosin-Patch 0.9.6.1 " > > > > > > > > I just rebuilt PHP due to a server rebuild (so I haven't tested RC yet) > > but > > > > I noticed it included that hardening patch (suhosin) this time...have > > you > > > > tried building w/o that? If running freebsd just do a 'make config' in > > the > > > > php5.2 port dir to turn it 'off'. I'll try this, but won't be for a few > > > > days. Yeah, I flubbed when trying to move a set of RAID1 drives from > > one > > > > server to another... > > > > > > > > P > > > > > > > > > > > > On 11/20/06, Spil Oss <spil.oss(a)googlemail.com> wrote: > > > > > Seems I'm not the only one with php 5.2.0 / eaccelerator problems... > > > > > > > > > > https://www.eaccelerator.net/ticket/207#preview > > > > > > > > > > Unfortunately no-one seems to have picked it up yet.... > > > > > > > > > > Spil. > > > > > > > > > > On 09/11/06, Spil Oss <spil.oss(a)googlemail.com> wrote: > > > > > > Hi All, > > > > > > > > > > > > Now running php compiled with --enable-debug so I could create a > > dump > > > > > > backtrace, and guess what, RoundCube is no longer segfaulting on > > > > > > RoundCube. > > > > > > > > > > > > Anyone able to explain this behaviour? > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > Spil > > > > > > > > > > > > On 09/11/06, Spil Oss < spil.oss(a)googlemail.com> wrote: > > > > > > > No such luck.... > > > > > > > > > > > > > > Ran portupgrade -rf php5 and still rouncube fails. If anyone has > > any > > > > > > > suggestions on how to make roundcube more verbose, I'm open for > > > > > > > suggestions! > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > Spil. > > > > > > > > > > > > > > On 08/11/06, Spil Oss < spil.oss(a)googlemail.com> wrote: > > > > > > > > Hi All, > > > > > > > > > > > > > > > > Just pulled the 20061108 snapshot and now succesfully able to > > build > > > > > > > > pear again (open_basedir restriction gave me headaches). Will > > try > > > > > > > > again, also rebuilding PEAR. > > > > > > > > > > > > > > > > As always, determined to make pigs fly! > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > > Spil. > > > > > > > > > > > > > > > > On 08/11/06, Moritz < mo(a)agrav.org> wrote: > > > > > > > > > Spil Oss wrote: > > > > > > > > > > Reverting back to 5.1.6 solved my problem. > > > > > > > > > > > > > > > > > > > Mind you, there are reports of people succesfully running > > > > roundcube on > > > > > > > > > > php 5.2.0, so you might try it on a test-box and then deploy > > if > > > > > > > > > > succesful. > > > > > > > > > > There must be something special with my setup that breaks > > > > roundcube.... > > > > > > > > > > > > > > > > > > I can confirm this. I have roundcube running on PHP 5.2.0 and > > it > > > > seems > > > > > > > > > to work fine. > > > > > > > > > > > > > > > > > > My system details: > > > > > > > > > > > > > > > > > > - roundcube v0.1-beta2 > > > > > > > > > - PHP 5.2.0-0.dotdeb.1 with Suhosin-Patch 0.9.6 > > > > > > > > > - Debian 3.1 > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > > > > > > Spil. > > > > > > > > > > > > > > > > > > Regards, > > > > > > > > > -- > > > > > > > > > Moritz > > > > > > > > > > > > > > > > > > mo(a)agrav.org | mo.agrav.org | luna.agrav.org/~mo > > > > > > > > > > > > > > > > > > Get my GPG key fingerprint here: > > > > > > > > > https://luna.agrav.org/~mo/gpg/ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > "Without music, life would be a mistake" - Friedrich Nietzsche > > > > > > > > > > > > > > -- > > > > "Without music, life would be a mistake" - Friedrich Nietzsche >

1 0

Cannot switch tasks
by Joshua J. Kugler 02 Feb '07

02 Feb '07

[I posted this to the forum, but haven't see a reply. Hoping the list might be a bit more active.] Server: Lighttpd Environment: CGI and FastCGI (tested both) Version: 0.1b2 (from Ubuntu packages) Errors in logs: none Browser: Firefox 1.5.0.9 I can log in fine, and all looks good. However, if I click on address book or personal settings, it goes right back to the mailbox view. The access log shows these two requests back to back: xxx.xxx.xxx.xxx hostname - [01/Feb/2007:17:04:54 -0900] "GET /?_task=settings HTTP/1.1" 200 2650 "http://hostname/?_task=mail" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.0.9) Gecko/20070126 Ubuntu/dapper-security Firefox/1.5.0.9" xxx.xxx.xxx.xxx hostname [01/Feb/2007:17:04:55 -0900] "GET /?_task=mail&_action=getunread&&_remote=1 HTTP/1.1" 200 153 "-" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.0.9) Gecko/20070126 Ubuntu/dapper-security Firefox/1.5.0. Oddly, the second one has no referrer. Where should I start looking, since there are no errors in the logs? Thanks! j -- Joshua Kugler Lead System Admin -- Senior Programmer http://www.eeinternet.com PGP Key: http://pgp.mit.edu/ ID 0xDB26D7CE PO Box 80086 -- Fairbanks, AK 99708 -- Ph: 907-456-5581 Fax: 907-456-3111

2 1

Re: auth with cram-md5 when imap login
by 今井　信 02 Feb '07

02 Feb '07

Yes, it is. but I don't want to disable it. I mean, you can choose auth type for smtp auth so I wanted to choose what auth type I use for imap auth. I guess there is not such a configuration now, is it? Shin On Thu, 1 Feb 2007 20:56:20 -0800 Thomas Gibbons <tgibbons(a)eymo.us> wrote: > Is your mail server configured to allow cram-md5? If so disable it. > > On Fri, 02 Feb 2007 13:14:21 +0900, <p-simai(a)ssl.fujitsu.com> wrote: > > Hi, > > > > Roundcube is such a nice web mail. It is the best of what I know about > > webmail. > > > > but I have one question. > > > > login takes really long so tailed maillog and I found out the reason. > > Roundcube tries to log in with cram-md5 and then with login > > How can I configure auth method as login? > > > > Shin Imai >

3 3

MAIL sending problem in rouncube_0.1-beta2.2
by sergeyyy2004 02 Feb '07

02 Feb '07

Dear developers! When I try to send mail via roundcube I have a loop and nothink sent :-( It don`t try to connect via smtp and don`t run any comans for mail sending. PHP mail setup is coirrect and main.inc.php already setup for mail sending. How to resolve ? With regards, Sergey.

2 1

auth with cram-md5 when imap login
by 今井　信 01 Feb '07

01 Feb '07

Hi, Roundcube is such a nice web mail. It is the best of what I know about webmail. but I have one question. login takes really long so tailed maillog and I found out the reason. Roundcube tries to log in with cram-md5 and then with login How can I configure auth method as login? Shin Imai

1 0

Reply Problem
by Chris Jett 29 Jan '07

29 Jan '07

Before I go through the trouble of downloading the nightly build, is the Reply issue resolved yet? Where you click 'Reply' and the To address is not populated? -- Chris Jett chris(a)jettfuel.net

2 2

[Fwd: Re: bug with images in html mode]
by Ralf 27 Jan '07

27 Jan '07

I've experienced similar problems. However, it seems to be a more general problem with RC. Whenever this happens, my CPU goes to 100% util. I added my comments and observations to http://trac.roundcube.net/trac.cgi/ticket/1483956 but it seems that not much is happening there (and I cant do it). Rgs, Ralf -------- Original Message -------- Subject: Re: bug with images in html mode Date: Thu, 25 Jan 2007 17:22:15 -0700 From: Guy McArthur <guymac(a)gmail.com> To: users(a)lists.roundcube.net So it seems this only happens with larger images, I tried an html email with an image at 140K, roundcube does not open the message (empty page source).

1 0

Re: bug with images in html mode
by Guy McArthur 25 Jan '07

25 Jan '07

So it seems this only happens with larger images, I tried an html email with an image at 140K, roundcube does not open the message (empty page source).

1 0

bug with attached images
by Guy McArthur 25 Jan '07

25 Jan '07

1 0

bug in session expiration
by Guy McArthur 25 Jan '07

25 Jan '07

I am seeing a problem where a few minutes after the first 5-minute auto-save, the session is terminated and message composition is interrupted, kicking the user back to the start screen. It seems to be ignoring my session_lifetime, which I changed to 90 (minutes) instead of the default 10. I don't think it auto-saves before terminating the session, either. [Now that's user hostile!]. At any rate, commenting out these lines (effectively disabling session timeout) seems to be a temporary workaround. //$message = show_message('sessionerror', 'error'); //rcmail_kill_session(); -- Guy

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users