Users

users@lists.roundcube.net

2981 discussions

[RoundCube Users] Patches for 0.1-beta
by Thomas Bruederli 22 Feb '06

22 Feb '06

The recently published beta release came up with two ugly bugs. One prevented from saving the language selection in the user preferences and the other completely omitted mail headers when having no smtp server configured. User Preference Language defaults to English: http://sourceforge.net/tracker/index.php?func=detail&aid=1435989&group_id=1… Sending mails as Nobody/Attachments are not sent: http://sourceforge.net/tracker/index.php?func=detail&aid=1434778&group_id=1… Sorry for that! Thomas

1 0

[RoundCube Users] email attachement
by Alexandre Chapellon 22 Feb '06

22 Feb '06

Hello all of you. I have notice something weared I would like to share with you. I have installed a postfix server doing antispam and antivirus content filter (using spamassassin & content_filter and clamav&clamsmtpd) Everything is ok except when I'm writing an email from roundcube webmail I tested writing an email attaching the eicar virus test file and when I send it the email scanner says there is no virus in the message! I did the same test with 2 others webmail and the virus has been discovred by clamd! Do you have any clues?

2 1

[RoundCube Users] getting around escaped " and '
by Brady J. Frey 22 Feb '06

22 Feb '06

Typically a PHP thing, I didn't expect it in roundcube (though, yes, it's php) -- how to I make it so my users email inbound and outbound don't escape out the quotes? For example, users who type in "Chicken's the best" send and receive \"Chicken\'s the best\" How do I make it so it does not do that? I haven't updated to beta yet, I was waiting for the issues to smooth over until I ran that route, but I'm on the most recent cvs before then. -- *Brady J. Frey* creative director // *dotfive* 1960 California St., Suite #23 San Francisco, CA 94109 *ph:* 415.354.1076 www.dotfive.com <http://www.dotfive.com>

4 4

[RoundCube Users] headers
by Greg Hetrick 22 Feb '06

22 Feb '06

I have an install of the beta up and running, I have dug through the archive and found posts that suggested corrections to a problem with headers not being hidden. I have tried doing a str_replace in the sendmail.inc file for the headers. Also have set it up to run off a postfix/SMTP install. The problem now is that the message comes through as user "Apache" which is the default user that runs the web service. The eariler post suggests that if I just have it running through a postfix install it should correct both problems, any thoughts? $header_str = str_replace("\r",'',$MAIL_MIME->txtHeaders($send_headers)); was able to clear the below headers. -------------------------------------------------------------------------------------------------------------------------- Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit Message-Id: <20060220083809.CA30762AE7(a)test.testing.org<20060220083809.CA30762AE7(a)kahlua.minderaser.org> > Date: Mon, 20 Feb 2006 02:38:09 -0600 (CST) From: ghetrick(a)testing.org <ghetrick(a)minderaser.org> (Apache) ---------------------------------------------------------------------------------------------------------------------------

5 12

Re: [RoundCube Users] IMAP SSL Using wrong port?
by Brett Patterson 22 Feb '06

22 Feb '06

Well, not sure what got it working, but I've been playing with it for a while, and it seems to be working now. I think it was me not having the SSL extension loaded in php (woops, missed during install). So all is well now. Thanks for the offer though. And yes, the server is on a separate host. But it works, so this can be "resolved". ~Brett Geoffrey McCaleb wrote: > Thats odd, I'm using port 993 on my local server with no problem, however I'm not using SSL. Is the mail server on a seperate host? > > Geoffrey > > On Wed, 22 Feb 2006 08:44:32 -0500, Brett Patterson <b.a.patterson(a)gmail.com> wrote: > >> Hi all. I'm trying to test-out roundcube on my local server. I've set >> everything up and got it running splendidly. I'm just having a problem >> with it. >> >> 1.) It doesn't use my port that I specified during connections. In the >> config file I've got: >> $rcmail_config['default_port'] = 993; >> That says to me that the default port to talk to the client on would be >> 993 (SSL). I've also specified my server to be >> "ssl://imap.server.com:993" and yet it won't connect. Keeps giving me >> this exact error: >> *IMAP Error:* Could not connect to Imap Server at port 143: >> >> I'd also like to suggest adding a line in the INSTALL file that tells >> new users to rename main.inc.php.dist and db.inc.php.dist to just >> *.inc.php. I didn't get that, took me a bit to figure it out... >> >> Love the program, hope to see more in the future. Any help would be >> greatly appreciated!! >> >> ~Brett >> > > >

1 0

[RoundCube Users] Flush the cache?
by Julian Field 22 Feb '06

22 Feb '06

-----BEGIN PGP SIGNED MESSAGE----- What is the best way of flushing the cache when using MySQL? I have a problem with messages not appearing in the inbox contents list. If I switch off "enable_caching" then everything works perfectly. So I am guessing it is the cache. I am running the latest beta release of Roundcube on RHEL4, talking to a Cyrus imap server. Thanks folks! - -- Julian Field jkf(a)ecs.soton.ac.uk Teaching Systems Manager Electronics & Computer Science University of Southampton SO17 1BJ, UK -----BEGIN PGP SIGNATURE----- Version: PGP Desktop 9.0.5 (Build 5050) iQEVAwUBQ/x99fw32o+k+q+hAQGJoAf/ddnb5QHhLSpw6XaKYdyMb+/gUGbkygua EggqU0CCin+gbfDo8CWROTVwv8tO+BCu4nG4OpsE8wqBFU3kLpLXDm6LVGRJgfCv sKpkUsYgayZRODv5TbUOORsoGKjY0BVL1tu4GUUSVeNoz5ymfmTUsPKGh2pbXIP/ lIwucIb4uZpwZYIrQlwJ6ZGILc+qYi9VpCs6kWC3pb4na0Uz5GsLPoYGQXLh5zXl RIaYcnDrGUy3j7vbG5WcqWtGNtSB0Gk5JXST5hVwmb+x0kjPYHT8a2t7jl2ytw4C AhWhrdury602NSPrM+8FZcgOQ6ltDD5fAVrmWH2stCjz+t/5XZwtbg== =GZHP -----END PGP SIGNATURE----- -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

1 0

Default mail server address.
by Lic. Martin Marques 22 Feb '06

22 Feb '06

In my RC server I happen to see that if the user hasn't set up his identities, when composing he gets a user(a)local.network where local.network is our local (private network) SMTP server. I'm sure yet if it's trying to get the value from the 'smtp_server' field or the 'default_host' (this is the imap configuration host). Is there a way to configure this apropriatly? -- 21:50:04 up 2 days, 9:07, 0 users, load average: 0.92, 0.37, 0.18 --------------------------------------------------------- Lic. Martín Marqués | SELECT 'mmarques' || Centro de Telemática | '@' || 'unl.edu.ar'; Universidad Nacional | DBA, Programador, del Litoral | Administrador ---------------------------------------------------------

1 0

[RoundCube Users] actions for multiple messages?
by Roman v. Gemmeren 22 Feb '06

22 Feb '06

hi all, i just gave roundcube another shot on my old P3-450 server and am amazed.;) Last time i checked it wouldn't show any other folders than Inbox (running cyrus with unixhierachy). But now that works like a charm. And it performs very well on that poor loaded machine, might be even better than ilohamail. Thx for that. After some testing i got a few suggestions: 1.I think it would be quite comfortable to have the "new message"-button also present when actually viewing a message. Or even better, having an completely editable menu-bar? 2.Actions for multiple messages (like moving 10 message to a different folder, marking them read/imporant...) 3.The abillity to sort the folders as i like (e.g. the important ones at the top..) 4.reading a signature from a file on the server (i have mine in ~/fortunesig) Thats all i could think of now, great work so far! Greetings, Roman v. Gemmeren -- This could be a fortune-sig read from file ;)

2 1

Editable Message-Menu?
by strowi 22 Feb '06

22 Feb '06

1 0

[RoundCube Users] from address display problem
by cynic＠elitistbastard.com 22 Feb '06

22 Feb '06

I have a from address configured in personal preferences. However, what shows up in sent mail as the user name is the info from the passwd file for the user that apache is running as. Thus, the address is correct, but the name is wrong. Any ideas on what could be causing this? I won\'t have time to dig into the code til saturday afternoon.

3 2

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users