Users

users@lists.roundcube.net

4 participants
2921 discussions

Re: [RCU] Question about large emails account
by A.L.E.C 02 Nov '14

02 Nov '14

On 10/21/2014 05:04 PM, Jorge Bastos wrote: > I have several users that have 20, 30, or some 40GB of emails, and loading > of emails does not always work and fails, only after some tries. The question is how many messages per folder they have and why sorting takes so long (I assume it's SORT/THREAD issue). You can also disable sorting in Roundcube by setting message list sort column to "None". > Question is, should I activate cache to make this work? > > If yes, how much size cache will be on the webmail side, only for headers > right? Yes, messages metadata, but also small message bodies (according to messages_cache_threshold setting, which is 50kB by default). Also remember that Roundcube will not cache all messages in a folder but only these which were accessed/displayed on the list. -- Aleksander 'A.L.E.C' Machniak LAN Management System Developer [http://lms.org.pl] Roundcube Webmail Developer [http://roundcube.net] --------------------------------------------------- PGP: 19359DC1 @@ GG: 2275252 @@ WWW: http://alec.pl

2 2

PHP 5.6 - Roundcube 1.0.3 - Valid certificate
by admin 28 Oct '14

28 Oct '14

Hi gents, I've just upgraded my server to PHP 5.6 and ran straight into the invalid cert issue. It seems that by default, PHP will now check if the certificate is actually valid! That's quite a nice feature but a slight pain when you are mostly dealing with self-signed certificates. Now, I did go ahead and upgrade to an actual valid certificate! Unfortunately, it seems that when you are using : $config['default_host'] = 'ssl://localhost'; or $config['smtp_server'] = 'localhost'; The connection will fail because the hostname you provide isn't actually the one registered to the certificate? Now, I did have a workaround by replace 'localhost' by my external FQDN but that's very elegant or efficient. I'd rather see the connection stay internal if I can. This link <https://bbs.archlinux.org/viewtopic.php?id=187063> does seem to provide some solutions and I've tried using : $config['imap_conn_options'] = array( 'ssl' => array( 'verify_peer' => false, 'verfify_peer_name' => false, ), ); and $config['smtp_conn_options'] = array( 'ssl' => array( 'verify_peer' => false, 'verify_peer_name' => false, ), ); With no results so far. Is there something incredibly obvious that I'm missing? Here is the error log : IMAP Error: Login failed for x@x from x. Could not connect to ssl://localhost:993: Unknown reason in x/rcube_imap.php on line 184 (POST /?_task=login?_task=login&_action=login) I appreciate any help on the matter! Thank you

4 3

Threaded order.
by Ken D'Ambrosio 27 Oct '14

27 Oct '14

Hi, all. When I thread my e-mail, the first e-mail in the thread is the one that shows in my inbox. Is there a way to reverse that order, and make it that the most recent e-mail shows? I'd vastly prefer to know that John sent me a reply five minutes ago, than that Joe started the thread two weeks ago. Thanks! -Ken

2 1

Not all mails shown for selected folder
by Sven Hartge 27 Oct '14

27 Oct '14

Hi! I lately migrated my Squirremail to Roundcube 1.0.2 (with courier-imap 4.10.0 from Debian Wheezy as backend) and at first everything seemed fine. But now more and more users report they don't see all mails when they select a folder, which I am able to verify once I log in from my system with their user and a master-password. It for example only shows three unread mails while at the same time displaying something like "1 to 50 of 342 mails" in the list status. What I did so far: - switched from memcached to db for the index_cache - disabled the index_cache - disabled SORTing in the IMAP server I enabled the imap debug log in a test system which show the same problem. I can see roundcube fetches all messages, but displays only some of them. Sometimes I can get all messages to display after I wildly toggle the search filter from "All" to "Unread" or "Marked" or "with attachments" and back and forth and back again. So far I am quite desperate because there is a mob with pitchforks forming outside of my office. Has anybody seen that behavior? Any idea how to debug this any further? Grüße, Sven. -- Sigmentation fault. Core dumped.

3 9

Can someone explain this Sent thread sorting?
by Philip Rhoades 25 Oct '14

25 Oct '14

People, I attach a screen capture of my Sent box - why does the second item on the list, which is a separate reply to the thread above it, get sorted to position 2? By the date, and being a single mail, it should be much further down the screen . . Thanks, Phil. -- Philip Rhoades GPO Box 3411 Sydney NSW 2001 Australia E-mail: phil(a)pricom.com.au

2 2

Question about large emails account
by Jorge Bastos 21 Oct '14

21 Oct '14

Hi, I have several users that have 20, 30, or some 40GB of emails, and loading of emails does not always work and fails, only after some tries. Question is, should I activate cache to make this work? If yes, how much size cache will be on the webmail side, only for headers right? Thanks in advanced,

1 0

Different Skins for each user
by Vinicius Haas Masiero 21 Oct '14

21 Oct '14

Good Morning guys! i work in a internet provider and my idea is to use one different skin for each domain which i sign in my servers. for example: domain.com - skin1, domain1.com - skin2, etc there a existing plugin for this? sorry for my bad english. ATT *Vinicius Masiero* Técnico Sênior *Telefone:* 51 3553-2049

2 5

only inbox folder after courier migration
by Luciano Gabriel Andino 21 Oct '14

21 Oct '14

Hello, after script migration, the only folder appears in RCU menu is Inbox. The others still are in Maildir "Maildir/.myfolder" and contains its "dovecot-uidlist" and "dovecot-keywords" files. May I need to edit some file? -- Saludos!! Luciano Andino GNU/Linux user #185103 Santa Fe - Argentina -----------------------------------------------

1 0

Issue with login
by absolutely_free＠libero.it 16 Oct '14

16 Oct '14

Hi, I am using RC 1.0.3 on CentOS server, with Dovecot and MySQL backend. I noticed strange behavior with some users; they can't login because "Error invalid request. No data was saved" occours. No problem in logging through pop3 or imap. I had no problem with other users on the same server. How can I investigate this? Thank you

1 0

Help with encryption
by Felix Rubio Dalmau 15 Oct '14

15 Oct '14

Hi everybody. I have been diving for a while in roundcube mail archives, and I have seen many threads about supporting gpg, etc. To me, using mailvelop it is more than enough, but I do not have the required knowledge to modify roundcube to display the attachments "encrypted.asc" in the body of the message. Could somebody point me in the proper direction? Regards, Felix

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users