Users

users@lists.roundcube.net

5 participants
2944 discussions

Upgrade from 0.95 to 1.0.1 : only first three emails displayed
by S Loewenthal 21 May '14

21 May '14

Hi, I was wondering if somebody had seen this issue when after initial upgrade from 0.9.5 to 1.0.1 the RC displays only the first three emails. I used ./bin/install.sh <target_dir> for my update. I rolled back to 0.9.5 by removing the newly installed directory and rolling back my previous copy and all emails were displayed again. Below I've copied how my upgrade unfolded, because it had some errors but I don't see how they should have caused the 3 email only issue. Running update script at target... NOTICE: Obsolete config options: (You still have some obsolete or inexistent properties set. This isn't a problem but should be noticed) - 'mime_magic' Do you want me to fix your local configuration? (y/N) y . backing up the current config file(s)... . writing /www/roundcube/config/config.inc.php... Done. Your configuration files are now up-to-date! WARNING: File type detection doesn't work properly! Please check the 'mime_magic' config option or the finfo functions of PHP and run this script again. Executing database schema update. Updating database schema (2013042700)... [OK] Updating database schema (2013052500)... [OK] ERROR: Error in DDL upgrade 2013061000: [1146] Table 'roundcubemail.cache_index' doesn't existUpdating database schema (2013061000)... [FAILED] All done. Lots of thanks if anybody could give me some help. Si. -- "I decided that I was a lemon for a couple of weeks. I kept myself amused all that time jumping in and out of a gin and tonic." pgp 4BA78604

3 2

Increase attachment file size in php.ini
by barul 03 May '14

03 May '14

Hello, I'd like to be able to send attachment bigger than default 2M size limit. In my php.ini's (I have 2 files, one in /etc/php/cgi, the other in /etc/php/cli), I've changed upload_max_filesize to 10M, but I still cannot send big attachments. Do I need to restart something to make the changes effective? Thanks, -- barul

3 3

Roundcube 1.0.0 exits "compose" after a time
by Zach La Celle 02 May '14

02 May '14

On Roundcube 1.0.0, if the user starts composing an email then leaves it for a few (5?) minutes, the software saves the composition to draft then exits back to the inbox. This did not used to happen on 7.1.0. Is there any way to prevent autosave of draft from kicking the user out of Compose?

3 6

Cannot resize pages on smartphone on RC upgrade (7.1.0 -> 1.0.0)
by Zach La Celle 01 May '14

01 May '14

Hello, After upgrading Roundcube from 7.1.0 (the repo version for Ubuntu 12.0.4) to 1.0.0 (downloaded from the website), users are reporting that they can no longer resize the page in their smartphone browser. I've confirmed this with Chrome on a Galaxy S3. Two finger dragging no longer works, and thus the software is much more difficult to use on the mobile device. Is there any reason that this functionality was broken from 7.1.0 to 1.0.0? Thank you.

1 0

Attachments Issue
by IngVittorio 29 Apr '14

29 Apr '14

Hello, I have an issue with roundcube webmail, I'm currently using v 0.9.0. Whenever I send attachments in bulk with a new mail, let's say I add 6 files and then 4 more files, I frequently notice that i'm losing attachments. After I send the email I can see that 2-3 attachments are missing. By giving a look at the code I saw that in this portion of the code inside sendmail.inc : /// sort attachments to make sure the order is the same as in the UI (#1488423) if ($files = rcube_utils::get_input_value('_attachments', rcube_utils::INPUT_POST)) { $files = explode(',', $files); $files = array_flip($files); foreach ($files as $idx => $val) { $files[$idx] = $COMPOSE['attachments'][$idx]; unset($COMPOSE['attachments'][$idx]); } $COMPOSE['attachments'] = array_merge(array_filter($files), $COMPOSE['attachments']); }/ The amount of entries inside $files is greater than the ones in $COMPOSE['attachments'] resulting in a leak in the attachments added to the email. I tried to figure out how to fix this issue but I'm still kinda lost. Could you please help me? Thank in advance, Vittorio -- View this message in context: http://roundcube-webmail.10982.n7.nabble.com/Attachments-Issue-tp12199.html Sent from the Users mailing list archive at Nabble.com.

2 1

Multi message import from zip file?
by Martin Egge 29 Apr '14

29 Apr '14

Hi, I've exported some messages within a zip file via zipdownload. Is there a way (or a plugin) to import the zip file instead of importing all messages seperately? Regards, Martin

2 1

Support IMAP MOVE extension [RFC 6851]
by Martin Egge 28 Apr '14

28 Apr '14

Hi, the CHANGELOG for Roundcube Webmail says there is support for IMAP MOVE extension [RFC 6851] since 1.0.0-beta. So how do I setup Roundcube in order to move some messages from one account to another? Regards, Martin

2 1

Upgrading via Git
by deoren 16 Apr '14

16 Apr '14

Hi, I found the official upgrade directions here: http://trac.roundcube.net/wiki/Howto_Upgrade http://trac.roundcube.net/browser/github/UPGRADING which goes mentions using the installto.sh script to handle upgrades. However I installed from Git and so far haven't had problems. To upgrade to v1.0 I ran: cd /path/to/my/roundcube/install/dir git fetch git checkout 1.0.0 From what I can tell I'm done, but I wanted to check and see if there is a post-upgrade step I'm missing. Looking over the upgrade guide I don't see mention of any database upgrade steps like MediaWiki or WordPress uses. Am I missing anything? For reference this is what I see in the "About" (upper left-hand corner): Roundcube Webmail 1.0.0 [GIT 20140405.0225] Thanks! P.S. Sending this from a Roundcube Webmail 1.0.0 installation. Thanks to the devs for all of their hard work!

2 2

RoundCube 1.0..0 request timeout
by Denny Jones 15 Apr '14

15 Apr '14

Hello, I have a user trying to forward an email with 5 large attachments from within RoundCube 1.0.0. The process ends with a request timeout. Is this a php timeout or a RoundCube timeout? How do I fix this? Denny

1 0

issue with CardDav
by Andreas Meyer 15 Apr '14

15 Apr '14

Hello! I am using Roundcube 0.9.4. When I delete a contact in CardDav I get the following error in the log: v0.5.1 | carddav_server_id: 6 | CardDAV-Server XML-Response is malformed. Synchronization aborted! I tried to solve this like said in https://github.com/graviox/Roundcube-CardDAV/issues/28 and https://github.com/graviox/Roundcube-CardDAV/issues/29 but that does not fix the problem. Is there a working solution know to this? Greetings Andreas

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users