Devs,
I sent a message to myself using RoundCube last week with a couple picture
attachments (trying to reproduce ticket #1485342). I couldn't display the
attachments, so I thought I had reproduced the problem from the ticket.
However, it turned out to be a problem with the e-mail headers on the
message sent out by RoundCube (which seems different than what the ticket
was describing). Before I dig too deeply into the MIME encoding, I wanted
to see if any of you could see any reason why the headers would have been
encoded this way.
Here is a section of the headers:
User-Agent: RoundCube Webmail/0.1
Content-Type:
=?UTF-8?Q?multipart/mixed;=0A=09boundary="=_02a240d2fbd71132d40be9b4c55e5587"?=
--=_02a240d2fbd71132d40be9b4c55e5587
Content-Type: multipart/alternative;
boundary="=_3138421b4fcb76298f28ab6e143b4ab2"
--=_3138421b4fcb76298f28ab6e143b4ab2
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset="UTF-8"
Notice the invalid Content-Type value. I though it only
needed to do the
quoted-printable encoding if there were non-7-bit-ASCII characters in the
header value (which doesn't seem to be the case here).
Any ideas?
--
Eric Stadtherr
estadtherr(a)gmail.com [1]
Links:
------
[1] mailto:estadtherr@gmail.com
_______________________________________________
List info: http://lists.roundcube.net/dev/
Hello,
I keep getting emails for the tickets where I am the reporter, but not
for the tickets where I contributed some patches and comments.
Are there a way to manage all that?
My ultimate preference is to read the Timeline RSS Feed instead of
getting all the email messages.
--
Regards,
Dennis P. Nikolaenko, dennis(a)nikolaenko.ru
_______________________________________________
List info: http://lists.roundcube.net/dev/
------- Forwarded message -------
Hi Daniel,
please email dev(a)lists.roundcube.net with your idea. We have a lot of
things to focus on right now, so please put that idea on the
mailinglist and see how the reception is, etc..
Personally, I'd like to see SyncML support in the addressbook, I am
not keen on LDAP. But that's just me personally.
Cheers,
Till
On Sun, Sep 14, 2008 at 3:03 AM, Daniel Aleksandersen wrote:
> Hi however is the Roundcube project admin
> I just discovered your exiting IMAP client project. I looked over the
> roadmap too, and found it quite fascinating.
> The only thing I did not like was that you have no plans to offer any
> decent
> way to synchronise the address book. IMAP is the perfect protocol for
> accessing emails. I would, however, have preferred a centralised storage
> for
> my address book, and then only access that data trough a client
> (Roundcube,
> for instance). Could you please focus on that? I think LDAP is suitable,
> as
> it is integrated for this purpose on some desktop email clients already.
> I could sponsor a 100 USD bounty for such a feature if it would help
> motivate others to assist you on this. (Notably I would have to agree on
> the
> terms of the bounty.)
> Thanks in advance, and do carry on with the project.
--
Daniel Aleksandersen
_______________________________________________
List info: http://lists.roundcube.net/dev/
I have been working to add contact groups (database backed) to my
roundcube but I am struggling with the task due to the complexities of
ajax and lack of documentation.
I have managed with some difficulty to implement the majority of it
using the LDAP contact groups code as a starting point, and I am hoping
some people here can point me in the right direction to get the last of
the elements working correctly.
I can create a new contact group in the database using code based on
program/steps/addressbook/save.inc, however I can not figure out how to
update the javascript in real time. In the current form, I have to leave
the addressbook and return to update it.
What do I add to make it update the display?
--
Chris St Denis
Programmer
SmarttNet (www.smartt.com)
Ph: 604-473-9700 Ext. 200
-------------------------------------------
"Smart Internet Solutions For Businesses"
_______________________________________________
List info: http://lists.roundcube.net/dev/
Folder list has a hand pointer, let it be consistent with a message list
to have an arrow pointer.
Index: skins/default/settings.css
===================================================================
--- skins/default/settings.css (revision 1795)
+++ skins/default/settings.css (working copy)
@@ -171,7 +171,7 @@
white-space: nowrap;
border-bottom: 1px solid #EBEBEB;
background-color: #F9F9F9;
- cursor: pointer;
+ cursor: default;
}
#subscription-table tr.virtual td
--
Regards,
Dennis P. Nikolaenko, dennis(a)nikolaenko.ru
_______________________________________________
List info: http://lists.roundcube.net/dev/
Hi! I've made a patch which adds vertical splitter + some small fixes.
It needs some work for IE and probably for Safari, but it works fine with:
- Firefox3.0 (focus issue fixed via CSS: -moz-user-select: none),
- Opera9.5 (ad. fixed iframe drag issue: added drag_active flag),
- Konqueror3.5.
Splitter dots are better centered now and #mainscreen division is
required, but it's not a problem, I think.
Some things may be done in better way, but it's working. Feel free to
send corrections ;)
--
Aleksander 'A.L.E.C' Machniak http://alec.pl gg:2275252
LAN Management System Developer http://lms.org.pl
Roundcube Webmail Project Developer http://roundcube.net
--- 8< --- detachments --- 8< ---
The following attachments have been detached and are available for viewing.
http://detached.gigo.com/rc/Xa/J7UfQYt7/vert_splitter.patch
Only click these links if you trust the sender, as well as this message.
--- 8< --- detachments --- 8< ---
_______________________________________________
List info: http://lists.roundcube.net/dev/
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Guys,
I've just checked out trunk so I can have the LDAP write facility for my
addressbooks, however, I've come across a bug.
When you enter your binddn - mine is uid=andy,ou=Users,dc=example,dc=com
- however, the bind_dn field is pre-appended with dn="$bind_dn" - which
breaks the authentication.
I'm looking through the code now to see if I can get rid of the leading
dn= and whether that fixes my problem. Let me know if you have any
other advice.
Regards,
Andy
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
iEYEARECAAYFAkjKb7YACgkQauMjEM4rxIRbngCgpbs/r5ikpVmY4439Ixvu/Jle
L04AnRWZnVn2dGyM2dktlDGNU8Ma9f20
=mJrq
-----END PGP SIGNATURE-----
_______________________________________________
List info: http://lists.roundcube.net/dev/
#1485151 was solved after private talks with ALEC, so now new bug waiting for
some action ...
http://trac.roundcube.net/ticket/1485311
The common office apps formats (m$ and openoffice) are misdetected by libmagic
library and that means that roundcube sends such attachment with wrong
Content-type.
I'm proposing to use plain filename extension based type detection for
commonly misdetected formats. Example patch attached to bugreport.
Opinions?
--
Arkadiusz MiĆkiewicz PLD/Linux Team
arekm / maven.pl http://ftp.pld-linux.org/
_______________________________________________
List info: http://lists.roundcube.net/dev/
Patch to update zh_CN localization. Thanks :)
--- 8< --- detachments --- 8< ---
The following attachments have been detached and are available for viewing.
http://detached.gigo.com/rc/mA/MRtfateN/label.inc.patch.bz2
Only click these links if you trust the sender, as well as this message.
--- 8< --- detachments --- 8< ---
_______________________________________________
List info: http://lists.roundcube.net/dev/