Users

users@lists.roundcube.net

2981 discussions

Joining two installations into one
by Jorge Bastos 06 Sep '17

06 Sep '17

Howdy, I have two installs of RC, but I discovered something that already exists, that is the possibility to have just one install, no matter the number of servers that I have: $config['default_host'] = 'mail.%s'; I know it was always there, but I was blind :) I even can create a separated record for all domains to use an internal IP if I want, but that's something I'll see if I have the need of, servers are all in the same datacenter/switch for now. Thing is, i have: Install A Install B And i have users that have contacts on both sides, and the user ID's will collide. What I'm thinking to do it: On install B update users set user_id=user_id+10000; update contacts set user_id=user_id+10000; and then join this two tables to install A the database schema is pretty simple, but I'd like an advice/confirmation on this if possible, 'cause I don't know what will happen when the user_id will reach the numbers that I incremented, will they collide or it'll check if the number exists? (I know it's an autoincrement field) I can always use a very very high value like user_id+100000000, but don't like the solution, Thanks in advanced :) Jorge,

2 2

Re: [RCU] Roundcube Webmail Update 1.3.1 released
by Thomas Bruederli 06 Sep '17

06 Sep '17

On Tue, Sep 5, 2017 at 5:18 PM, micah <micah(a)riseup.net> wrote: > Will these security fixes be available for the 1.2 series? > > I want to upgrade to 1.3, but rushing an upgrade to get potential XSS > issues resolved is not the best. Yes, an update to the 1.2 series is on the way... ~Thomas

1 0

problem with installation of Resend(bounce) for roundcube-1.3.0
by Spirk, Werner 05 Sep '17

05 Sep '17

hello, I hope anyone can help me. Does anyone installed Resend(bounce) for roundcube-1.3.0? Who has written the code? I installed the feature Resend(bounce) for roundcube-1.3.0 according https://github.com/roundcube/roundcubemail/commit/1b2d3c0ac2ccd297ca2965a15… The "bounce"-button below "forward as attachment" is shown greyed. So I cannot test this feature. I installed the 16 files from https://github.com/roundcube/roundcubemail/commit/1b2d3c0ac2ccd297ca2965a15… - nothing else. Have I something more to do? What is going wrong? Thanks in advance Greetings Werner -- +----------------------------------------------------------------------+ | Werner Spirk . . Tel.: +49 89 35831 8707 | | Leibniz-Rechenzentrum (_) (_) Fax : +49 89 35831 8507 | | Boltzmannstr. 1 | | | | | | 85748 Garching |o| |o| Email: Spirk(a)lrz.de | | | |/\| | | | Deutschland bei München | +----------------------------------------------------------------------+

1 0

SSL certificate woes with Roundcube 1.3 and PHP 5.6
by Ralph Seichter 31 Aug '17

31 Aug '17

With Roundcube 1.3.0 and PHP 5.6.31, I keep seeing errors like the following in my logs: Aug 10 11:00:31 myhost roundcube: <0ho1kdmf> IMAP Error: Login failed for username from [ip-address]. Could not connect to ssl://imap.some.domain:993: Unknown reason in /var/www/roundcubemail/program/lib/Roundcube/rcube_imap.php on line 196 (POST /rcm/?_task=login&_action=login) Outgoing SMTP TLS connections from Roundcube are affected, too. This is probably caused by how PHP 5.6 verifies certificates. I have tried configuring openssl.cafile=/etc/ssl/certs/ca-certificates.crt and/or openssl.capath=/etc/ssl/certs in php.ini with world-readable certificate chains, but no dice. I am positive that the IMAP and SMTP servers (Dovecot and Postfix, respectively) are configured correctly, because MUAs like Thunderbird or iOS Mail connect successfully. When I include the following workaround in config.inc.php Roundcube can connect to the IMAP server: $config['default_host'] = 'ssl://imap.some.domain'; $config['imap_conn_options'] = array( 'ssl' => array( 'verify_peer' => false, ), ); Does anybody here know how to debug and fix this? Other people seem to have this problem as well, but disabling peer verification was the only recommendation I could find so far, and for obvious reasons I would like to avoid that. -Ralph

5 12

how to make thunderbird flags works ?
by Benny Pedersen 22 Aug '17

22 Aug '17

i like to have same mailflags possible to set as in thunderbird, i just dont know how to make that in roundcube ?, is there a guide somewhere for this ?

1 0

upgrading roundcube from 1.1.9 to 1.3.0
by absolutely_free＠libero.it 17 Aug '17

17 Aug '17

Hi, is it safe to directly upgrade from RC 1.1.9 to 1.3.0? Thank you

1 0

Cannot access protected property Sabre\Vobject\Property\FlatText
by Mathew Shires 15 Aug '17

15 Aug '17

I have a Radicale CalDav server which I have successfully connected to, calendars can be viewed and edited. However I keep getting a 500 internal server error when opening an email with a calendar invite attached. This is what's in the error log: > PHP Fatal error: Cannot access protected property > Sabre\Vobject\Property\FlatText::$value in > /usr/share/roundcubemail/plugins/libcalendaring/libvcalendar.php on > line 755 -- Mathew Shires ------------------------------------------------------------------------------ NQC Logo NQC Ltd 1 George Leigh Street, Manchester, M4 5DL, United Kingdom Support Centre +44 (0) 845 299 2994 Find out more on youtube.com/nqccom <http://youtube.com/nqccom> © 2003 - 2016 NQC Ltd. (04854362) All Rights Reserved. ------------------------------------------------------------------------------- This email and any attachments may be confidential and are intended solely for the use of the individual to whom it is addressed. If you are not the intended recipient, please delete this e-mail immediately and neither take any action based upon its contents, nor copy, use, print, distribute or disseminate it or any information contained in it.

7 16

Widescreen layout fontsize problem
by barul 23 Jul '17

23 Jul '17

Hello, While using the widescreen layout with RC 1.3.0 and Classic theme, the middle column got fonts slightly larger than the two others. Is it something I can fix in one of the theme files? Thanks, -- barul

1 0

possible bug in plugins with roundcube 1.2.5
by Benny Pedersen 15 Jul '17

15 Jul '17

archive 2.4 GPLv3+ filesystem_attachments 1.0 GPLv3+ jqueryui 1.10.4 GPLv3+ managesieve 8.6 GPLv3+ markasjunk 1.2 GPLv3+ password 4.1 GPLv3+ show_additional_headers 2.0 GPLv3+ vcard_attachments 3.2 GPLv3+ is what i have enabled, bug: when achived prefs is set up sender addresse sorting it can create any folder without any restriction what chars is allowed or not, but here is the problem, roundcube cant move this mails to other folders afterwards :( iam unsure if its really a dovecot bug or roundcube plugin archive with sender based sorting to folder, in other words will plugin archive respect dovecot allowed chars for folder nameing ? can others confirm it works or fail ?

1 0

managesieve
by David Gessel 14 Jul '17

14 Jul '17

I have sieve working fine with dovecot. I can edit the filters via ssh and they do the right thing. My mail server is on a different IP than the Dovecot install, which makes login a bit more complicated, but login works properly for roundcube's mail access, but the same config options do not seem to work with the managesieve plugin. I've tried a few options, googled about, and figured I'd ask: IMAP config, which works, looks like: $config['default_host'] = 'ssl://mail.domain.tld'; $config['default_port'] = 993; $config['imap_conn_options'] = array( 'ssl' => array( 'verify_peer' => false, 'verfify_peer_name' => false, ), ); this connects generating log entries like: Jul 13 10:56:36 imap-login: Info: Login: user=<me(a)domain.tld>, method=PLAIN, rip=10.3.69.139, lip=10.3.69.135, mpid=21055, TLS, session=<1nRXpzZUIVUKA0WL> (all good). Configuring the manage sieve plugin as: $config['managesieve_port'] = 4190; $config['managesieve_host'] = 'ssl://mail.domain.tld'; $config['managesieve_auth_type'] = plain; $config['managesieve_auth_cid'] = '%u'; $config['managesieve_auth_pw'] = '%p'; $config['imap_conn_options'] = array( 'ssl' => array( 'verify_peer' => false, 'verfify_peer_name' => false, ), ); $config['managesieve_conn_options'] = null; when I select the filters icon, the logs show: Jul 13 10:59:47 managesieve-login: Info: Disconnected: Too many invalid commands. (no auth attempts in 0 secs): user=<>, rip=10.3.69.139, lip=10.3.69.135, session=<7gnCsjZUkpoKA0WL> Seems to be opening a connection, but not speaking the right connection languge.... Also, alas, $config['managesieve_debug'] = true; does not result in /var/log/sieve being generated (or after being created, being populated) Any hints very much appreciated.

4 6

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users