Dev

dev@lists.roundcube.net

1 participants
4293 discussions

RE: IMAP-UW - Problems with plaintext login
by Michael G. Jung 14 Oct '05

14 Oct '05

I should also mention that Outlook Express has no problem in authentication either by plain text (143) or ssl (993). Any ideas welcome. --mikej -----Original Message----- From: Michael G. Jung Sent: Friday, October 14, 2005 12:32 PM To: dev(a)lists.roundcube.net Subject: IMAP-UW - Problems with plaintext login Are there any know issues with imap-uw? When I attempt to log in I see in my maillog: Oct 14 12:25:59 firewall imapd[60509]: Login user=mikej host=firewall.mikej.com [10.0.0.3] Oct 14 12:25:59 firewall imapd[60509]: Logout user=mikej host=firewall.mikej.com [10.0.0.3] Which tells me that authentication successed... but RoundCube displays "login denied". I tried increasing loging to 8 and see: * CAPABILITY IMAP4REV1 LITERAL+ IDLE NAMESPACE MAILBOX-REFERRALS BINARY UNSELECT SCAN SORT THREAD=REFERENCES THREAD=ORDEREDSUBJECT MULTIAPPEND SASL-IR LOGIN-REFERRALS STARTTLS AUTH=LOGIN cp01 OK CAPABILITY completed Tried PLAIN: Resource id #23 Thanks! --mikej

1 0

setup/login problems....
by matt nicholson 14 Oct '05

14 Oct '05

i'm a brand new user so bear with me please. i just downlaoded and "installed" roundcube, epr teh directions in the INSTALL file. however, when i go to login, the page just sits there, attempting to load and never does. (i click "login", in the status bar it says contacting whatever.host.com, and just sits there). roundcube is running on the same box as the mailserver/imap (which is psotfix/dovecot if it makes a diffrence). i connect normally with ssl, so in the config file i have : ssl://localhost:993 for teh default host. am i missing anything? are there any apache config changes i should have to make? i am testing this from an OSX box runnign safari right now, but the same happened last night with firefox on linux, so i doubt its that. thanks. matt nicholson sjoeboo(a)sjoeboo.com

3 2

Re: Displaying FROM:
by Christopher A. Watford 14 Oct '05

14 Oct '05

On 10/14/05, macross <macross(a)msyte.com> wrote: > > It appears the From: is not showing up in outlook 2003. Nor is the message > being read correctly. I get a plain text email such as this. > > ------------------ > Date: Fri, 14 Oct 2005 9:30:53 -0400 > > From: macross <macross(a)msyte.com> > Reply-To: macross(a)msyte.com > Message-ID: <3a0976c1801185fc0700f317390da66a(a)mail.msyte.com> > > X-Sender: macross(a)msyte.com > > User-Agent: RoundCube Webmail/0.1-20051011 > > Content-Type: text/plain; charset="ISO-8859-1" > > Content-Transfer-Encoding: 7bit > > > > Test > > ------------------- > > I've tested this both through Exchange and Qmail the server seems > irrelevant. When I view the mail in squirrelmail or thunderbird it appears > fine. > > Thanks for a wonderful alternative to squirrelmail. I know it's still yound > buggy and lacking features but it appears to be heading in the right > direction and I already am waiting to put it in production. I've seen the same issues as well; I am running GMail. -- Christopher A. Watford

1 0

displaying imap errors
by David Saez Padros 14 Oct '05

14 Oct '05

Hi !! I get the following error with Courier IMAP just after sending a message: IMAP Error in /usr/local/http-docs/admin/html/roundcubemail/program/steps/mail/sendmail.inc (): Could not save message in Sent it would be great to capture that errors and show a nice description to the user, same for errors produced when sending a message (smtp auth, ...) that now also appear as warnings if E_ALL is active. -- Best regrads ... ---------------------------------------------------------------- David Saez Padros http://www.ols.es On-Line Services 2000 S.L. e-mail david(a)ols.es Pintor Vayreda 1 telf +34 902 50 29 75 08184 Palau-Solita i Plegamans movil +34 670 35 27 53 ----------------------------------------------------------------

3 2

IMAP w/ STARTTLS?
by Darren David 14 Oct '05

14 Oct '05

hi all- just found this project on freshmeat and thought i'd give it a go since SquirrelMail is starting to look a bit dated ( tho it works like a charm ). wasn't sure how to search the list archives, so apologies if this has been covered, but can i connect to my IMAP server via STARTTLS? "ssl://server:993" obviously isn't doing the trick in the config file. thanks in advance, the app looks really terrific ( the screenshots, at least! ) cheers, darren david

2 1

unsubscribe
by Tank 14 Oct '05

14 Oct '05

unsubscribe

1 0

Large Install
by Christopher A. Watford 14 Oct '05

14 Oct '05

How well suited is RoundCube to an install w/ about 700,000 mailboxes on Courier-IMAP. The load will be somewhere between 800 and 2500 users at any given time using the system (150-350 views/s on apache, 200qps on mysql avg). SquirrelMail is the current client, pretty light and fast, and it's IMAP routines are amazing when you have high load. I know RC uses IlohaMail as its IMAP provider, but when we tried Iloha it did not perform well under load. Has anybody attempted such a large setup with RoundCube before? I'm shopping around for a new webmail client due to the nearly unskinnable nature of SquirrelMail. The users keep blabbering about making webmail look nice, or something crazy like that. -- Christopher A. Watford christopher.watford(a)gmail.com http://dorm.tunkeymicket.com http://www.theroadtrip2005.com

3 3

Fwd: Re: imap_root when using maildir++ depot and local user login problem
by Ian 14 Oct '05

14 Oct '05

I've managed to test my issue a bit further, and it's not quite what I thought. My first login is fine, but if I try to open a mail message it hangs. This appears to be in the IMAP server - but I can't confirm that yet. Until the IMAP server (or whatever) times this connection out, I can't use RoundCube for anything except for viewing the login screen and (sometimes) the inbox (cached in MySQL, I'm guessing). The MySQL server is fully responding, but I can't test the IMAP server properly from where I am. --- Ian <ianyates(a)yahoo.com> wrote: > Date: Fri, 14 Oct 2005 10:31:33 +0100 (BST) > From: Ian <ianyates(a)yahoo.com> > Subject: Re: imap_root when using maildir++ depot > and local user login problem > To: dev(a)lists.roundcube.net > > > 2. I use qmail with vmailmgr as my MTA. I can > login > > fine with virtual > > users, but local users seem to generate some kind > of > > loop and I cannot > > login, it just loads forever. If I check my imap > > servers logs it shows > > that the authentification was successful, > RoundCubes > > logs show no errors > > and neither do the apache-logs. > > > > I also have SquirrelMail installed and it works > > flawlessly as do > > stand-alone clients like Mozilla Thunderbird. > > Similarly, I use qmail and was previously using IMP > without any problems. > > I installed RoundCube last night and all seemed > well, > but this morning I get a loop whenever I try to log > in. > This is true for all accounts, all of which are > local > users. > > The MySQL processes shows that RoundCube connects > but > then sleeps. > Unfortunately I don't have access to any other logs > at > the moment. > > Is this a known bug and is there a fix > available/planned? > > Thanks > > --- Mattias Wikstrom <burke(a)yagrebu.net> wrote: > > > Hi! > > > > I just installed RoundCube and everything seems to > > work fine except for > > two things: > > > > 1. I use bincimap as my imap server with the > > maildir++ depot (same as > > courier-imap), which stores all the users folders > in > > the INBOX. > > > > If I leave imap_root empty in the config (as is > the > > default) all the > > folders are shown as being under the INBOX, but > the > > Sent, Drafts and > > Trash folders are not assigned icons. > > > > If I change imap_root to "INBOX/" the folders are > > shown with correct > > icons but the Inbox disappears from the list and > > cannot be selected! > > > > 2. I use qmail with vmailmgr as my MTA. I can > login > > fine with virtual > > users, but local users seem to generate some kind > of > > loop and I cannot > > login, it just loads forever. If I check my imap > > servers logs it shows > > that the authentification was successful, > RoundCubes > > logs show no errors > > and neither do the apache-logs. > > > > I also have SquirrelMail installed and it works > > flawlessly as do > > stand-alone clients like Mozilla Thunderbird. > > > > I realise that RoundCube is still in its infancy > but > > the project looks > > very promising already! Alas I'm not a programmer, > > so I cannot > > contribute to the project (except with bug-reports > > ;). > > > > Best regards! > > > > Mattias Wikstrom > > > > > > > > > > > > > ___________________________________________________________ > > To help you stay safe and secure online, we've > developed the all new Yahoo! Security Centre. > http://uk.security.yahoo.com > > > > ___________________________________________________________ Yahoo! Messenger - NEW crystal clear PC to PC calling worldwide with voicemail http://uk.messenger.yahoo.com

1 0

optimizing rcub_imap.inc
by David Saez Padros 14 Oct '05

14 Oct '05

Hi !! just looking at _list_headers i noticed that deleted headers are also cached, is there any reason for that ? Also problems related to users having lots of emails in the inbox folder cause big problems, just about 1000 messages in a user inbox causes that the login process lasts forever. If in safe_mode and execution time and memory usage are limited users with big inbox are totally unable to login. Supporting server side message sort will improve performance and would simplify fetching only one page of headers at a time. -- Best regards ... ---------------------------------------------------------------- David Saez Padros http://www.ols.es On-Line Services 2000 S.L. e-mail david(a)ols.es Pintor Vayreda 1 telf +34 902 50 29 75 08184 Palau-Solita i Plegamans movil +34 670 35 27 53 ----------------------------------------------------------------

2 3

Fw: Imstallation Problems
by Michael Eaton 14 Oct '05

14 Oct '05

Fixed it, the username had been truncated when i created the database user, and i hadnt realised.. the error wasnt very clear, maybe this was the Pear::DB? Normaly i'd expect: Access Denied for user@localhost. (Using Password YES) or something to that effect.. anyway.. its now running fine afaik... but when i try to login to a mail server it doesnt work.. http://www.ircsucks.com/mail (testing(a)ircsucks.com | password | mail.ircsucks.com OR localhost) When i use the same server info that roundcube is on it goes wierd but still errors: Warning: fopen(./logs/errors): failed to open stream: Keine Berechtigung in /home/ircsucks/public_html/mail/program/include/bugs.inc on line 67 IMAP Error in (): Authentication failed (LOGIN): "a001 NO LOGIN failed" wth? Hope somebody can help :) Thanks Michael PS: I'm very interested in getting this working under cPanel (www.cpanel.net) cPanel uses http auth to send the vars to the script, (they currently use squirrelmail/horde/neomail) and IMO they all suck :P ... if i could actually get this to work, perhaps i can use the lil php knowledge i have to help get it working with cPanel?

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Dev