Users

users@lists.roundcube.net

2981 discussions

Re: [RCU] Plugin to reset password
by Mike Burger 30 Apr '19

30 Apr '19

This is a very good point...one that can be addressed in its configuration. You see, it pays to do a little research prior to attempting to denigrate someone's contribution to the discussion. First of all, the password plugin is packaged WITH RCE...as in, in the tarball. Second, if you go into the password plugin directory and read the README file, you'll find that section 2, "Drivers", covers 20 possible configurations: 2. Drivers 2.1. Database (sql) 2.2. Cyrus/SASL (sasl) 2.3. Poppassd/Courierpassd (poppassd) 2.4. LDAP (ldap) 2.5. DirectAdmin Control Panel (directadmin) 2.6. cPanel 2.6.1. cPanel WHM (cpanel) 2.6.2. cPanel Webmail (cpanel_webmail) 2.7. XIMSS/Communigate (ximms) 2.8. Virtualmin (virtualmin) 2.9. hMailServer (hmail) 2.10. PAM (pam) 2.11. Chpasswd (chpasswd) 2.12. LDAP - no PEAR (ldap_simple) 2.13. XMail (xmail) 2.14. Pw (pw_usermod) 2.15. domainFACTORY (domainfactory) 2.16. DBMail (dbmail) 2.17. Expect (expect) 2.18. Samba (smb) 2.19. Vpopmail daemon (vpopmaild) 2.20. Plesk (Plesk RPC-API) 2.21. Kpasswd On 2019-04-29 17:17, Reindl Harald wrote: > come on and show me how you imagine that to work on a proper system > where the webmail runs on a different machine than any mailservice and > can connect to the mailservice only via SMTP/POP3/IMAP > > Am 29.04.19 um 22:58 schrieb Mike Burger: >> On 2019-04-29 08:51, Giles Coochey wrote: >>> On 29/04/2019 13:29, Andreas Meyer wrote: >>>> Hello! >>>> >>>> There is no plugin available to let a user reset her password, >>>> right? >>>> >>>> Kind regards >>>> >>>> Andreas >>> >>> If you think about this, you'll realise that the answer is no. >>> >>> Roundcube is simply using the supplied credentials to the IMAP >>> server, >>> which could be on a completely different machine to the one running >>> Roundcube. Therefore, as within the IMAP protocol, there is no API >>> for changing a user's password Roundcube could not do that by itself. >>> >>> If you're looking for a user self-service method of changing a >>> password, then you'll need to look at the authentication method used >>> by your IMAP server and provide a relevant tool at that end, not on >>> the RoundCube front-end. >> >> Andreas, >> >> As you'll see by way of the two images I've attached, I'm afraid that >> the above response is incorrect. >> >> If you can't find it in <path-to-roundcube>/plugins/password, you can >> find it at: >> >> https://github.com/roundcube/roundcubemail/tree/master/plugins/password -- Mike Burger http://www.bubbanfriends.org "It's always suicide-mission this, save-the-planet that. No one ever just stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1

1 0

Migration problem
by Neo Crypt 24 Apr '19

24 Apr '19

Hello, I made a roundcube migration to another server with another ip address. I made a database backup via phpmyadmin and restored it to the new server. knowing that the old server contains a mysql Ver 14.14 Distrib 5.1.73 database under redhat 6.8 and the new server contains mysql Ver 15.1 Distrib 5.5.60-MariaDB under redhat 7.6. The backup and restore procedure worked well. However I can not find the address book and the preferences of the user. Is there a migration and restoration procedure very specific to roundecube so that I find all the data or a support to my problem. Thank you verry much i need your support.

2 1

Plugin ident_switch
by Eriel Perez 16 Apr '19

16 Apr '19

Hello friends. When I try to send an email after putting the ident_switch plugin, I get an error. The SMTP is authenticated. How can I make the plugin work for me correctly? Specifically, this is the error: SMTP Error (535): Authentication failed. Thank you.

1 0

strtotime()
by Andreas Meyer 15 Apr '19

15 Apr '19

Hello! Moved the old email-stuff to a new server on CentOS, can connect with roundcube after copying the email-folders but get: [14-Apr-2019 19:48:14 UTC] PHP Warning: strtotime(): It is not safe to rely on the system's timezone settings. You are *required* to use the dat e.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /var/www/root/mailsystem/program/lib/Roundcube/rcube_session_db.php on line 104 Also the date of the copied emails are empty. Any solution for this? Didn't use imapsync yet. Kind regards Andreas -- PGP-Fingerprint: D392 5D21 0299 63D7 5BAE 4562 1E56 B2EA 81A2 59F1

2 2

Sending the original IP address to the IMAP server
by André Rodier 14 Apr '19

14 Apr '19

Hello everyone, I would like to know if there is a way to configure RoundCube to send the original IP address to the IMAP server, using the ID command. This is used in Dovecot, to log the remote IP address where the client is connecting from. and not having the logs filled of connections from "127.0.0.1" Is it something supported by RoundCube? And if yes, how can I configure it? Thanks a lot. André -- https://github.com/progmaticltd/homebox

2 4

TRYING AGAIN: Replying to previously sent mail
by Philip Rhoades 13 Apr '19

13 Apr '19

People, I didn't get an answer to this a couple of months so . . trying again: I am currently on version: 1.4-beta but on previous versions, RCM was smart enough to know that when I would reply to a previously sent email in my Sent folder, that it knew the new reply should go to the original recipient and not back to myself - this behaviour has stopped in the last version or so - is there any way I can turn it back on? I am constantly sending out an email with a promise to follow up when I have more information about something and it is very convenient to just reply to the previous email . . and not get it sent to myself . . Thanks, Phil. -- Philip Rhoades PO Box 896 Cowra NSW 2794 Australia E-mail: phil(a)pricom.com.au

2 2

Re: [RCU] Problem with CSRF
by Andreas Meyer 12 Apr '19

12 Apr '19

Reindl Harald <h.reindl(a)thelounge.net> schrieb am 09.04.19 um 11:16:20 Uhr: > >>> What happend here that all of the sudden I don't have a working > >>> roundcube anymore? Where does this CSRF problem come from? I > >>> just upgraded to version 1.3.9 and the problem remains. > >>> > >> > >> This just happens every once in a while, and nobody has a good > >> answer. Our users certainly don't know what to do. They call us, > >> we don't know what to do. I started disabling the CSRF protection > >> entirely: > >> > >> 1. Open program/lib/Roundcube/rcube.php 2. Search for "public > >> function check_request" 3. Have it always return true. > > > > I fear I don't know how to do that. I don't know much about PHP if > > at all. > > just write "return true;" as first line after the function definition, > it's that easy public function check_request($mode = rcube_utils::INPUT_POST) { return true; } like so and comment out the rest of the function? Must be wrong, get a blank page. Andreas -- PGP-Fingerprint: D392 5D21 0299 63D7 5BAE 4562 1E56 B2EA 81A2 59F1

4 6

Problem with Managesieve
by Diego 11 Apr '19

11 Apr '19

Hello, I'm having trouble making the Managesieve plugin work. I had several difficulties to install, I believe because I did not have much experience with Roundcube. Currently, the "create filter" option appears for my users, they create the filters based on their values, but when the email arrives it is not redirected to the folder in question. Example: We have a filter created for the following purpose: When you receive an email from admin01(a)gmail.com, move to the Gmail folder. The email is entering the inbox directly, instead of going to the box named Gmail. (existing box created through the Roundcube interface itself). How can I solve this problem? Thank you very much. Diego Silva

3 3

Roundcube with webserver hiawatha
by Andreas Meyer 11 Apr '19

11 Apr '19

Hello! I don't know what went wrong but roundcube does not show the content of the mailfolders and most of the menuentries anymore. Checked all the settings of apache and tried older versions of roundube. Can't find out what causes the problems. Did a fresh install with a new database, no luck. So I am thinking about trying it with another webserver, for example hiwatha. My question is will roundcube run with hiawatha? Kind regards Andreas -- PGP-Fingerprint: D392 5D21 0299 63D7 5BAE 4562 1E56 B2EA 81A2 59F1

1 0

Re: [RCU] Problem with CSRF
by Andreas Meyer 09 Apr '19

09 Apr '19

Reindl Harald <h.reindl(a)thelounge.net> schrieb am 08.04.19 um 22:43:39 Uhr: > >> roudcube and a dumb CSRF protection at the loin/logout page, > >> ignore it > > > > I can't ignore it. The mailfolders are empty and I can' logout. > > Don't know why this happens. Nothing changed in the system for many > > month. > > nonsense, saw that over the years and either reload login page or just > delete your cookies, done - learn to operate your browser No, this does not solve the problem. I just installed a fresh chromium browser to test with instead of firefox and have the same problem with chromium. Andreas -- PGP-Fingerprint: D392 5D21 0299 63D7 5BAE 4562 1E56 B2EA 81A2 59F1

2 3

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users