Users

users@lists.roundcube.net

15 participants
2943 discussions

cannot change settings in webpage
by mick crane 11 Jan '19

11 Jan '19

ALERT: dopey home user sorry to be a nuisance Is current Debian buster, dovecot, roundcube with enigma and managesieve plugins. Everything was working nicely 1.3.8 and then something went wrong. Since installed 1.4-beta. I was a bit confused because I read it that the "updateto" would update the downloaded 1.4-beta to the configuration from the previous install but updates instead the previous install. Anyway it is working now and installation page has the green ticks except I just get the unhappy document face in the right hand window in the "settings" tab. In the "settings/folders" tab all the folders are there but I get the unhappy document picture if I try to make a new folder. I can move emails about between folders in "mail". Likewise the "PGP keys"tab shows the keys I copied there by hand but there is no information in the right hand window. There is the text "rapunzel.home refused to connect". ufw is turned off. Is this likely an issue with Dovecot or something daft I haven't done in roundcube configuration ? Can't see anything in any of the logs I've looked at except enigma log says: [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: USING GPG 2.2.12 with PHP 7.3.0-2 [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: OPENING GPG SUBPROCESS WITH THE FOLLOWING COMMAND: [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: /usr/bin/gpg --status-fd '3' --command-fd '4' --no-secmem-warning --no-tty --no-default-keyring --no-options --no-permission-warning --exit-on-status-write-error --trust-model always --pinentry-mode loopback --ignore-time-conflict --ignore-valid-from --with-colons --with-fingerprint --with-fingerprint --fixed-list-mode --homedir '/usr/share/roundcubemail/plugins/enigma/home/mick' --list-secret-keys [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: BEGIN PROCESSING [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: selecting streams [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => got 1 [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: GPG output stream ready for reading [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => about to read 65536 bytes from GPG output [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => read 470 bytes [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: selecting streams [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => got 1 [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: GPG output stream ready for reading [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => about to read 65536 bytes from GPG output [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => read 474 bytes [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: selecting streams [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => got 3 [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: GPG output stream ready for reading [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => about to read 65536 bytes from GPG output [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => read 0 bytes [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: GPG error stream ready for reading [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => about to read 65536 bytes from GPG error [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => read 0 bytes mick -- Key ID 4BFEBB31

1 2

Recalling Emails
by Elite Cryo Studio 11 Jan '19

11 Jan '19

Hi, I need to recall an email...is this possible? Kind regards Elite Cryo Studio

2 1

email will not list in browser
by Web Analysts 11 Jan '19

11 Jan '19

ubuntu 14.04, postfix/dovecot/mysql. using imap. Email will not list in any browser. I can manage folders and see the correct # of emails, change my preferences, etc. below is an excerpt of my imap logfile Please advise. Thank you! [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN AUTH=LOGIN] Dovecot (Ubuntu) ready. [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] C: A0001 ID ("name" "Roundcube" "version" "1.3.3" "php" "5.5.9-1ubuntu4.26" "os" "Linux" "command" "/?_task=settings&_action=edit-folder&_mbox=Sent%20Items&_framed=1") [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: * ID ("name" "Dovecot") [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: A0001 OK ID completed. [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] C: A0002 AUTHENTICATE PLAIN ****** [49] [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: A0002 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE BINARY MOVE] Logged in [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] C: A0003 LIST "" "Sent Items" [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: * LIST (\HasNoChildren) "." "Sent Items" [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: A0003 OK List completed. [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] C: A0004 LIST "" "*" [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: * LIST (\HasNoChildren) "." "Junk E-mail" [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: * LIST (\HasNoChildren) "." "Deleted Items" [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: * LIST (\HasNoChildren) "." "Sent Items" [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: * LIST (\HasNoChildren) "." INBOX [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: A0004 OK List completed. [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] C: A0005 STATUS "Sent Items" (MESSAGES UNSEEN) [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: * STATUS "Sent Items" (MESSAGES 4 UNSEEN 0) [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: A0005 OK Status completed. [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] C: A0006 LOGOUT [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: * BYE Logging out [08-Jan-2019 07:01:59 -0800]: <rbjcts5q> [A1F5] S: A0006 OK Logout completed. [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN AUTH=LOGIN] Dovecot (Ubuntu) ready. [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] C: A0001 ID ("name" "Roundcube" "version" "1.3.3" "php" "5.5.9-1ubuntu4.26" "os" "Linux" "command" "/?_task=settings&_action=edit-folder&_mbox=INBOX&_framed=1") [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: * ID ("name" "Dovecot") [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: A0001 OK ID completed. [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] C: A0002 AUTHENTICATE PLAIN ****** [49] [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: A0002 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE BINARY MOVE] Logged in [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] C: A0003 LIST "" INBOX [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: * LIST (\HasNoChildren) "." INBOX [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: A0003 OK List completed. [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] C: A0004 STATUS INBOX (MESSAGES UNSEEN) [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: * STATUS INBOX (MESSAGES 9 UNSEEN 4) [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: A0004 OK Status completed. [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] C: A0005 LOGOUT [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: * BYE Logging out [08-Jan-2019 07:02:07 -0800]: <rbjcts5q> [E849] S: A0005 OK Logout completed.

1 0

log imap activity
by Anton Gorlov 11 Jan '19

11 Jan '19

Hi! Whai is right way to log imap activity? need log delete mail,folders and login (mail), ip of client

3 3

cannot change settings in roundcube webpage
by mick crane 11 Jan '19

11 Jan '19

ALERT: dopey home user sorry to be a nuisance Is current Debian buster, dovecot, roundcube with enigma and managesieve plugins. Everything was working nicely 1.3.8 and then something went wrong. Since installed 1.4-beta. I was a bit confused because I read it that the "updateto" would update the downloaded 1.4-beta to the configuration from the previous install but updates instead the previous install. Anyway it is working now and installation page has the green ticks except I just get the unhappy document face in the right hand window in the "settings" tab. In the "settings/folders" tab all the folders are there but I get the unhappy document picture if I try to make a new folder. I can move emails about between folders in "mail". Likewise the "PGP keys"tab shows the keys I copied there by hand but there is no information in the right hand window. There is the text "rapunzel.home refused to connect". ufw is turned off. Is this likely an issue with Dovecot or something daft I haven't done in roundcube configuration ? Could it be anything to do with SSL which I'm also having bother getting to work this time ? Can't see anything in any of the logs I've looked at except enigma log says: [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: USING GPG 2.2.12 with PHP 7.3.0-2 [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: OPENING GPG SUBPROCESS WITH THE FOLLOWING COMMAND: [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: /usr/bin/gpg --status-fd '3' --command-fd '4' --no-secmem-warning --no-tty --no-default-keyring --no-options --no-permission-warning --exit-on-status-write-error --trust-model always --pinentry-mode loopback --ignore-time-conflict --ignore-valid-from --with-colons --with-fingerprint --with-fingerprint --fixed-list-mode --homedir '/usr/share/roundcubemail/plugins/enigma/home/mick' --list-secret-keys [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: BEGIN PROCESSING [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: selecting streams [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => got 1 [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: GPG output stream ready for reading [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => about to read 65536 bytes from GPG output [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => read 470 bytes [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: selecting streams [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => got 1 [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: GPG output stream ready for reading [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => about to read 65536 bytes from GPG output [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => read 474 bytes [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: selecting streams [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => got 3 [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: GPG output stream ready for reading [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => about to read 65536 bytes from GPG output [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => read 0 bytes [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: GPG error stream ready for reading [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => about to read 65536 bytes from GPG error [11-Jan-2019 10:34:04 +0000]: <h5bcdh7c> GPG: => read 0 bytes mick -- Key ID 4BFEBB31

1 0

Email will not list in any browser
by Web Analysts 06 Jan '19

06 Jan '19

ubuntu 14.04, postfix/dovecot/mysql. using imap. Email will not list in any browser. I can manage folders and see the correct # of emails, change my preferences, etc. no meaningful errors logged. Please advise. Thank you!

2 4

php fatal error
by Web Analysts 05 Jan '19

05 Jan '19

Setting up RC 1.33 on linux. Test send/imap connect fine. When I login however no email or folders are listed whatsoever. My RC error log shows [04-Jan-2019 15:54:22 America/Los_Angeles] PHP Fatal error: Call to a member function get_folder() on a non-object in /var/www/html/roundcube/public_html/program/steps/mail/compose.inc on line 63 [04-Jan-2019 15:54:22 America/Los_Angeles] PHP Stack trace: [04-Jan-2019 15:54:22 America/Los_Angeles] PHP 1. {main}() /var/www/html/roundcube/public_html/index.php:0 [04-Jan-2019 15:54:22 America/Los_Angeles] PHP 2. include_once() /var/www/html/roundcube/public_html/index.php:303 Please advise. Thank you!

2 1

problem with attachments
by mick crane 23 Dec '18

23 Dec '18

ALERT:- dopey home user. How do I tell which roundcube I'm using ? Everything is working except I get SERVICE CURRENTLY NOT AVAILABLE! Error No. [600] if I try to open an email with attachments cups print server is on same PC as roundcubemail. I was fiddling with cups the other day on client and I'm certain all I did was typed "lpadmin <server> <printer>" on client in error of understanding purpose of lpadmin although it is possible I updated server with apt before this happened but may have been after. Relevant might be that apt suggested auto-remove for a few files which I did. I was using roundcubemail-1.3.8 Anyway PHP seemed to stop working, just showing text. apache error log showed. "[php7:error] [pid 5733] [client 10.0.0.101:53579] PHP Fatal error: Uncaught Error: Class 'DOMDocument' not found in /usr/share/roundcubemail-1.3.8/program/lib/Roundcube/html.php:357\nStack trace:\n#0" so I set about removing/installing with apt PHP modules roundcube webpage says are required. php-dom php-xml php-jason I forget exactly which. installed roundcubemail-1.4-beta-complete by running "updateto" using still there roundcubemail-1.3.5 directory there was an error in the install saying php-pspell wasn't installed so I got that with apt and tried the install script again where it says roundcube is already installed, up to date or something. In /usr/share/ I have the directories /usr/share/roundcubemail-1.3.5 /usr/share/roundcubemail-1.3.8 whereas I thought I might have /usr/share/roundcubemail-1.4-beta So the questions are how do I fix this 600 error ? how do I find out which roundcube I'm using ? does 1.4 beta install itself in 1.3.8 directory ? What bit of software looks after attachements or is this some configuration, I'm pretty certain that the attachments are only gpg signatures. Is it necessary to protect some libraries from apt ? regards. (please if reply do not add attachment). mick -- Key ID 4BFEBB31

1 2

Problem mit der angezeigten Mailadresse in Roundcube
by Tino Kurth 12 Dec '18

12 Dec '18

Hallo zusammen, wir haben die aktuelle Version von Roundcube im Einsatz. Allerdings haben wir das Problem, dass der Anmeldename am Postfach nicht gleich der Mailadresse ist. Wir suchen nach einer Möglichkeit, dies anzupassen, weil die abgehenden Mails ebenfalls mit dem Anmeldenamen und der dazugehörigen Domain versendet werden. Die so zusammen gesetzte Mailadresse gibt es aber nicht. Wir haben versucht, diverse php Dateien anzupassen. Da das aber nicht Sinn und Zweck ist, frage ich in der Mailingliste, ob es nicht einfacher geht. Über eine Antwort würde ich mich sehr freuen. Viele Grüße Tino Kurth

4 4

Hello and Help!
by Gerardo Contreras 11 Dec '18

11 Dec '18

Hello all. I'm just joining the list. I've browsed through the archives but I have a couple of questions. I just installed the 1.4 beta. We like the Elastic skin so we are planning to use it as a default for all my users.. I plan to keep it updated, but I have a couple of questions. * Is it possible to have a popup or a modal when a user first signs in -- Just a simple window with the TOS for the account with an OK, or Accept button, that lets you go on to the second window which lets you complete your Identity. * I noticed there are user levels. 1 - 4. 4 being default. how would I go about managing those on a per user, or per group basis? I want MOST users not to be able to modify their email address or their organization. * Using the elastic skin -- I noticed on the configs that I can put a logo on the main screen, in fact I was able to put a logo but it is stretched in an ugly way. What are the proper dimensions for my logo? Can I specify a different logo on the main mail page? I see the logo on the upper left corner of my screen, but it's just a part of the logo. I would like to specify a different one there. I have 3 specified on my array by looking at examples: one for '*' which points to a large logo, one for ':favicon', and one for ':small', but the :small one does not show on the upper left. it's part of the '*' one. * Is there a way to resize the center pane (or hide/minimize it) when needed? (for example, when an extraordinarily wide message, so that I don't have to scroll side to side too much) -- This would also need to be possible when redacting mail so that the Options and Attachments column does not get in the way. That is all for now. I am sure I will have more questions as I keep using the system. Thank you all for your help. -- Universidad del Papaloapan Campus Loma Bonita 281 872 9230 ext 313

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Users